I'm trying to install a game from a CD and there is an error message which sais," Setup is unable to locate a file it needs to continue. Please make sure the CD-ROM is in the drive and press retry to continue." I click on retry and the error message keeps on appearing.How do I solve this problem?
Re-installing a game, Enigma: Rising Tide I receive this error message. This happened one time before. I don't recall how I was able to overcome, but presently I had to re-install the game and now I have this error message again. I understand that there have been other instances with others installing games where this message appears.
i have a 250GB Hard Drive and I used Western Digital's Data Lifeguard Tools 11 Tools to allow Windows to recognize all 250GB and break the 24-bit barrier. When I install Windows XP Pro, it goes through the format and the file setup fine (as far as I know) and then when it goes to boot, it goes right back into the Setup Config...it doesn't go on to install Windows. When the disk is taken out it just continually restarts and claims that there is an invalid BOOT.INI.
I have had trouble with the .net framework. Because of possible corruption i deleted all .net framework files.Since then i have tried to install the .net framework files. i continue to receive a message that reads ERROR 1402 could not open key HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionSharedDlls. Verify that you have sufficient access to that key.or contact your support personnel
Try to install new software Turbo Tax and the software for my new Epson Scanner. I get this application error message: This application cannot run. That is all it says. I've had this computer for three years and have installed software many times with no problems. There is plenty of room on the hard drive. I have tried installing in safe mode. I have tried to restore back. I have done a defrag.
When doing an XP windows re-install. I am getting the error "Error loading operating system" I was formating the drive with XP and it stopped. Now when rebooting to go to CD for install I get the Error.
When i try to install xp sp2, I keep getting "the data is invalid. xp sp2 could not be installed" error message. I have re-installed windows and tried installing sp2 from CD, and tried the downlooad from the microsoft website, both with the same result.
I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up. Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b
Every time I switch on my machine and try to connect to the internet, I get a dialogue box: Web page is unavailable while offline. To view this page, click connect. When I click connect, I can view the page and don't get the error message again until I switch off the machine. Why does this happen?
I've tried several times to install Windows XP now on a new Maxtor drive bought just the other day. When I have the disc in, it loads to the blue install screen without asking me to press a key to boot from cd, I choose to install, partition the drive and format. It copies the files and then restarts, but when it loads again it still doesn't ask for me to press a key (which you aren't supposed to press the second time), and it loads back to the first menu, where I can start all over again.
I HAVE MICROSOFT VALID XP PRO CD WITH LEGIT. PRODUCT KEY. WHEN I GO TO WINDOWS UPDATES I GET AN INVALID PRODUCT KEY MESSAGE. I HAVE USED THE WALK AROUND BY GOING TO TOOLS, MANAGE ADD-ONS AND DISABLING THE WGA. IT WORKS, BUT AS A PERSON WHO LIKES TO DO THINGS CORRECTLY , IS MICROSOFT COMING OUT WITH A FIX FOR THIS FRUSTRATING ISSUE..
I HAVE A VALID COPY OF WINDOWS XP PRO. WHEN I GO TO WINDOWS UPDATES IT VALIDATES THEN I RECEIVE A MESSAGE THAT YOU HAVE AN INVALID PRODUCT ID. I READ IN A NEWS GROUP THAT IT WAS A BUG. I RECEIVED THIS QUOTE FROM A NEWGROUP POSTING. The result of a bug in WinXP SP2's code that creates the PID for display. WGA extracts the correct PID. The one displayed in System Properties General tab will have the OEM-00 issue because of the bug.
a message keeps popping up saying the following: Cannot load dialog. Error 623: The system could not find the phone book entry for this connection. All I can do is click the close button and it goes away and nothing else seems to happen, but it pops up again in a few minutes.
I have a Dell Inspirion laptop and have formated the HD and removed the partions. Have tried booting from a USB HD and have also tried another burned disk. No change will not install.
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this? Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose. Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
When I'm trying to start up Windows XP Home Edition I receive an error box without an error message, I can just click YES or NO. Neither option let's me continue. When starting up in Safe Mode, everything works fine.
The message could not be sent because the server rejected the sender's e-mail address. The sender's e-mail address was 'cih333@suddenlink.net'. Subject 'Batman!', Account: 'pop.suddenlink.net', Server: 'smtp.suddenlink.net', Protocol: SMTP, Server Response: '553 Authentication is required to send mail as <cih333@suddenlink.net>', Port: 25, Secure(SSL): No, Server Error: 553, Error Number: 0x800CCC78
I keep getting this error message when I boot. The entire message says, "windows explorer has encountered an error and needs to close." When I close the box, i lose my desktop, and can't run a bunch of programs, including the "run" option. I am able to run my browsers and get on the web. I did do a system restore, and it worked at first, but then on the next reboot, i got the error message again. Did another system restore, same thing.
I haveWin XP Home SP2, and an ESS ES56H-PI Data Fax Modem.Unfortunately, over the week-end I completely screwed up my PC when trying to install a Linux O/S, and had to re-install Win XP - which I have successfully done. I am now re-installing my various applications,and have installed Win XP Fax using the same procedure as I used last November (Faxing in Windows XP by Sharon Crawford). Everything seemed to go OK, but when I try to send a fax I get an error message on the Fax Monitor: 'Fax device error'.
Computer that has Windows XP and I've started getting these annoying error messages that "Internet Explorer has encountered a problem and needs to close", the box has a debug button or send error report. What kind of update do, The version of IE is 6.0.2900.2180.xpsp.
When I turn my pc and windows loads up an error message appears saying that windows service pack 2 setup has encountered an error and has to close. However when I close the error message it keeps popping up every 20 seconds or so. When I went to microsofts website that told me that service pack 2 was installed on my pc. I have ran a full viral scan using the latest version of Panda and have also ran Reg-cure to see if the problem was in the registry but the error message still keeps popping up.
Installing windows on a pc built for my friend and it comes up with a stop code. stop d1. driver_irql_not_less_or_equal then it states
acpi.sys address fc40d3b4 base at fc3fb000
which i think refers to a stop a1 as well.
ive tried using 2 different type of memory on the m-board and still get the same error. there are no other hardware besides a cdrom and hdisk, mosue and keyboard. i did have an old logitech mouse but swapped that as i read that can cause problems too.
i dont know how to go about fixing this as their is a hotfix for acpi problems but thatr equires u to actually have windows on teh pc in teh first place i.e safe mode.
i can get into bios and it performs POST no problems. the only other thing is it boots fromcdrom but it says no emulation.
My friend had problems with her computer I fixed some but need help with rest.The first problem is I can not install AVG Free it gets 1/2 way then says( Error 0 800700050)Registry Root HKCU (OEMI) Failed Also computer is slow at starting also slow loading Internet Explorer..I downloaded CCleaner - Malware bytes & Advance SystemCare they found lots of spyware & problems all of those are fixed and computer is running a bit faster plus I uninstalled a lot of rubbish that her and kids downloaded also looked at what was running in startup. my friend has windows XP home, service pack3 and uses IE8..My main thing is to get AVG running, and then if there is anything else that I could do to get Computer running faster.
When I try to install SP3, after it has downloaded through Auto-update, it gives me internal error, without any codes or anything. Just says installation did not complete.
I�m having many problems during the instalation of microsoft net framework. First of all this occur cause i was trying to install NET FRAMEWORK 3.0 on my computer but the instalation never ended and it give me some errors, so i uninstall every version of the program trying to reinstall them again (i read this may be a solution (i use add/remove programs and a clean up tool specified for removing net framework)), first i try installing 1.0, but a message says that i already have it installed, then 1.1 which i could install fine, then the SP1 for 1.1 says that i need version 2.0.5556 in order to install this service pack, then i try to install 2.0 but an incompatibility error appears referring that i may have installed " framework 2.0 sp1" (wich i don�t), then i try installing 2.0 sp1 but i get a "setup error" nothing else, same when trying with 3.0.
i have try different things like starting/stopping msiexec (on safe mode), installing and removing net framework several times or trying to install IIS (wich i couldn't cause i dont have the original windows cd) as possible solutions, but this problem is driving me crazy! Is there a solution like uninstalling all, installing all again without format? i think it maybe has something to do with file extensions missing, i read something about MSI files, but im not share.
when i try to install msn messenger 7.0, it keeps bringing up an error, saying that Microsoft Windows Journal msi cannot be found. I don't know how that happened but, is there a way i can fix that problem?.
Alright, here?s my deal (I hope ya?ll can help..):The Bottom-Line (Short-Version): I bought a couple PC?s with Ubuntu (Linux) installed. I need XP on it. My XP Install disc doesn?t work (error pops up), if I tried to partition the drive, I?ll mess it up for sure; what the hell do I do?What I?ve Done (Detailed-Version): I recently bought a couple computers (Dell Optiple X GX150) that originally had the XP OS on it; currently, Ubuntu (Linux) resides as the OS (which is a bad thing, in this case).I would like to uninstall/delete ?Ubuntu? and put ?Windows XP? (or any other version for this matter) as my main & ONLY operating system. I have a ?Windows XP Installation Disc? that I TRIED to use and install. I downloaded ?Wine? & ?Crossover?, each opens the .EXE on the disc and allows me to explore. In ?Setup?, it asks: ?What do you want to do?? When I click, ?Install Windows XP?,
I installed windows xp on a new hard drive.Now when I turn the computer on I get an error.A DISK READ ERROR OCCURED press CLT+ALT+DEL to restart when i press CLT+ALT+DEL the computer will restart but I keep getting the same error and windows won't start.
I was installing IIS and I received the message "Can not copy connect.asp." I looked for the file but I could not find it anywhere.An do so I installed IIS without that particular file. Do I really need this to create web application? Also, what does the message mean?