Internal Error While Installing SP3
Mar 20, 2010When I try to install SP3, after it has downloaded through Auto-update, it gives me internal error, without any codes or anything. Just says installation did not complete.
View 3 Replies
ADVERTISEMENT
Installing SP3 (An Internal Error Occurred)
Sep 30, 2009I've recently put together an old computer using parts from 2 similar machines. The specs are..
Mobo: GA-K8VM800M
CPU: AMD Sempron 2800+ - o/ced to 2ghz tonight.
HDD: Master - Seagate, Slave - Maxtor both 70gb
Ram: 256 + 512 @ 400
Onboard VGA..
Standard 250V PSU
Okay so, i've been trying all night to install SP3 on this thing but every time I get this error "An Internal Error Occurred" and it's driving me crazy. I installed a fresh Windows XP SP2 on it and uninstalled the few updates I did through windows updates. I've cleaned the registry. I've done everything it says to do here: http://support.microsoft.com/kb/949384. I've tried installing it from the Windows updates page, i've tried installing it through Automatic updates and i've even downloaded the full SP3 Package (also tried this in safe-mode). I've read every freaking forum about this error and took their advice. Nothing works........
Installing Sp2 - Internal Error Occurred
May 18, 2008I recently did a system repair after having problems with Windows starting up, and I need to re-install sp2 for programs such as iTunes to work. When I try running the update wizard, it gets to the 'collecting inventory' (I think that's what it's called) stage, and then stops with an "An Internal Error Occured" message. Below I posted the data from svcpack.log.
[QUOTE]
================================================================================
3.937: 2008/05/18 22:35:36.268 (local)
3.937: f:a20f92d53e2234d8e995e0i386updateupdate.exe (version 5.5.1005.0)
3.937: Service Pack started with following command line:
4.093: Return Value From OnACPower = 1
4.093: OnACPower returned value( 0x1 ) which is Equal To 0x1
4.093: Condition succeeded for section OnACPower.Section in Line 1 of PreRequisite
4.093: SOFTWAREMicrosoftWindowsCurrentVersionSetupWindowsFeatures is not Present
4.093: First Condition in A6Block.Section Succeeded..................
Installing SP3: "internal Error", But Can't Repair Product Id
Sep 1, 2010I have XP with service pack 2 already installed. I tried installing sp3, following all the guidelines about being an administrator, closing all programs, disabling virus scanners and such, but consistently get this "internal error" as soon as the installation starts. The event viewer doesn't say anything useful, but according to http://support.microsoft.com/kb/949384/ this is a problem with a funky product id.
The solution says I should go to the System Properties to get the product id. Well an abstraction of that product id is 69831-xxx-xxxxxxx-xxxxx. Then it tells me to go to HKEY_LOCAL_MACHINESYSTEMWPAKey-XXXXXXXXXXXXXXXXXXXXX, and work with the fields in there. It predicts that there might be more than one key conforming to that format, and there is. It says I should pick the key that has the same ProductID as found in the System Properties, but they both have the same id and it isn't what I found in System Properties, it's 55285-xxx-xxxxxxx-xxxxx.I have one product id in System Properties, and another that appears in two keys in the registry.
Here's my SysInfo:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 2, 32 bit
Processor: AMD Athlon(tm) XP 2600+, x86 Family 6 Model 10 Stepping 0
Processor Count: 1
RAM: 1023 Mb
Graphics Card: NVIDIA GeForce 6200 , 128 Mb
Hard Drives: C: Total - 103936 MB, Free - 25331 MB; D: Total - 13228 MB, Free - 8921 MB; G: Total - 70605 MB, Free - 11730 MB;
Motherboard: Gigabyte Technology Co., Ltd., nVidia-nForce2, 1.x,
Antivirus: AVG Anti-Virus Free, Updated: Yes, On-Demand Scanner: Enabled
Installing With Internal CD-ROM Or Floppy
Aug 17, 2008the computer is a SolidPPC50 515 Model, which has no internal CD-ROM or Floppy drive. I have an external USB CD-ROM and Floppy, but there are only 2 USB ports, and no PS/2 keyboard slot, so I've had to use a USB keyboard. Despite the BIOS being compatible with booting through USB, it doesn't recognise the CD-ROM, but it does recognise the Floppy. I tried using a bootable floppy with the I386 folder from the install CD copied to the Hard Drive (formatted as FAT32), but when I run WINNT.exe then try to change over the Floppy drive for the CD-ROM, it can't find the CD-ROM drive.
View 3 Replies View RelatedInstalling New Internal Hard Drive
May 5, 2006before I install the new hard drive making this new drive the boot drive which will be replacing my existing "C" drive how I by to do this, my system is Compaq Presario with Windows XP Home Edition and has Drive "C" with 20GB, Drive "D" (which is the SYSTEM SAVE DRIVE) with 18GB, Slave Drive "G" with 98GB and I made a partition on this drive which is Drive "H" with 15GB, the new drive that I want to install is a Seagate with 120 GB.
View 14 Replies View RelatedInstalling An Internal 250GB Hard Drive
Feb 23, 2006Hi Folks, I have a Dell Optiplex GX240 running Windows XP Pro with 512MB memory. I currently have a 40GB hard drive in there. I want to know if it can handle a 250GB hard drive. Any help will be greatly appreciated. I'm considering the Western Digital Hard Drive.
View 12 Replies View RelatedWhat Is Internal Error 2753?
Jun 23, 2005While trying uninstall and re-install Microsoft antispyware, I am getting "Internal Error 2753 ".When searched, there is no GcasInstallHelper.exe file on my hard drives. I am disappointed to see the MS released such a buggy program.
View 9 Replies View RelatedIpconfig An Internal Error Occurred
Sep 19, 2007Before I reinstall the OS,,, does anyone have the fix for DHCP issues. When I run ipconfig I get the internal error occured error. I have tried to retstart TCP/IP, I changed the name of the PC and ther group name then rebooted but notta.
View 3 Replies View RelatedNorton Goback Internal Error
Sep 1, 2005Boots up and can't get past the Norton Go Back.if I press the space bar,it will go to this message.Norton Goback internal error press any key to reboot, and when I do,it starts all over again only to get the same message.Sometimes, will show a diagram of I believe, the keyboard and computer with arrows pointing to F1 key in diagram, and at the top it says no operating system. So i got the XP disk, and completely formatted to RAW, and re-installed XP.Only to have it come back to the diagram thing saying no Operating System.
View 6 Replies View RelatedInstallShield Will Not Work - Opera Browser - Internal Error
Mar 15, 2008I'm trying to download the Opera browser, but when I do, it goes though the steps of installing and then I get the following error: Internal Error 2932C:DocumentsandSettingsCompaq_OwnerApplicationDataMicrosoftInstalle r(C619B312-19F3-460A-9F7B-443248379F18)ARPRODUCTICON.exe,131 I've tried several registry cleaners, etc. but can't fix the problems.
View 11 Replies View RelatedInternal Error 2908 Disable To Install Program
Sep 3, 2006Recently I haven't been able to install certain programs due to Internal Error 2908.When I press OK in the message box another one opens and all I can do is kill the setup program in Task Manager.I guess this is some sort of registry problem.
View 6 Replies View Related"Internal Error Unable To Query HOST" When We Try To Use Ipconfig
Oct 17, 2005I have issue in 2 of my computers. I lost internet connectivity. I run on Wired DSL connection ( always on ). I did try to check ipaddress of my computer and it ends up with Internal error
" An internal error occurred: the system cannot find the file specified. Additional information: Unable to query hostname " after googleing over internet i found that if we replace tcpip.sys from
c:windowssystem32drivers
SP2 - TCP/IP Internal Error - "Unable To Query Host Name"
May 15, 2005SP2 - TCP/IP internal error - "Unable to Query host name" A friend installed SP2 on a Dell Inspiron 8100 laptop, 866M processor, 833MHz & 320MB RAM.
View 1 Replies View RelatedSP2 Will Not Install "an Internal Error Occured"
Jul 27, 2005Running XP Home Edition. I run SP2 setup. It does it's inspections and the last text I see displayed before it gives me "an internal error occured" is 'checking product ID.' I checked the numerical product ID and it does not match those as listed as Pirated. This computer has several issues and really should be reloaded, but the user has 'misplaced' the CD's that came with the system. Below is the latest attempt at running SP2 according to my svcpack.log
View 6 Replies View RelatedGetting Error While Installing Fax Monitor: 'Fax Device Error'?
Aug 29, 2005I haveWin XP Home SP2, and an ESS ES56H-PI Data Fax Modem.Unfortunately, over the week-end I completely screwed up my PC when trying to install a Linux O/S, and had to re-install Win XP - which I have successfully done. I am now re-installing my various applications,and have installed Win XP Fax using the same procedure as I used last November (Faxing in Windows XP by Sharon Crawford). Everything seemed to go OK, but when I try to send a fax I get an error message on the Fax Monitor: 'Fax device error'.
View 2 Replies View RelatedXp Installing Stop Error
Feb 5, 2006Installing windows on a pc built for my friend and it comes up with a stop code.
stop d1. driver_irql_not_less_or_equal then it states
acpi.sys
address fc40d3b4 base at fc3fb000
which i think refers to a stop a1 as well.
ive tried using 2 different type of memory on the m-board and still get the same error.
there are no other hardware besides a cdrom and hdisk, mosue and keyboard. i did have an old logitech mouse but swapped that as i read that can cause problems too.
i dont know how to go about fixing this as their is a hotfix for acpi problems but thatr equires u to actually have windows on teh pc in teh first place i.e safe mode.
i can get into bios and it performs POST no problems. the only other thing is it boots fromcdrom but it says no emulation.
Error Installing AVG Free
Sep 9, 2009My friend had problems with her computer I fixed some but need help with rest.The first problem is I can not install AVG Free it gets 1/2 way then says( Error 0 800700050)Registry Root HKCU (OEMI) Failed Also computer is slow at starting also slow loading Internet Explorer..I downloaded CCleaner - Malware bytes & Advance SystemCare they found lots of spyware & problems all of those are fixed and computer is running a bit faster plus I uninstalled a lot of rubbish that her and kids downloaded also looked at what was running in startup. my friend has windows XP home, service pack3 and uses IE8..My main thing is to get AVG running, and then if there is anything else that I could do to get Computer running faster.
View 2 Replies View RelatedInstalling 2.0 Sp1 - Setup Error
Jun 3, 2008I�m having many problems during the instalation of microsoft net framework. First of all this occur cause i was trying to install NET FRAMEWORK 3.0 on my computer but the instalation never ended and it give me some errors, so i uninstall every version of the program trying to reinstall them again (i read this may be a solution (i use add/remove programs and a clean up tool specified for removing net framework)), first i try installing 1.0, but a message says that i already have it installed, then 1.1 which i could install fine, then the SP1 for 1.1 says that i need version 2.0.5556 in order to install this service pack, then i try to install 2.0 but an incompatibility error appears referring that i may have installed " framework 2.0 sp1" (wich i don�t), then i try installing 2.0 sp1 but i get a "setup error" nothing else, same when trying with 3.0.
i have try different things like starting/stopping msiexec (on safe mode), installing and removing net framework several times or trying to install IIS (wich i couldn't cause i dont have the original windows cd) as possible solutions, but this problem is driving me crazy! Is there a solution like uninstalling all, installing all again without format? i think it maybe has something to do with file extensions missing, i read something about MSI files, but im not share.
Installing Messenger 7.0 - Keeps Error
Jan 21, 2005when i try to install msn messenger 7.0, it keeps bringing up an error, saying that Microsoft Windows Journal msi cannot be found. I don't know how that happened but, is there a way i can fix that problem?.
View 2 Replies View Related:Help Installing Over Ubuntu (Error Msg):
Oct 7, 2008Alright, here?s my deal (I hope ya?ll can help..):The Bottom-Line (Short-Version): I bought a couple PC?s with Ubuntu (Linux) installed. I need XP on it. My XP Install disc doesn?t work (error pops up), if I tried to partition the drive, I?ll mess it up for sure; what the hell do I do?What I?ve Done (Detailed-Version): I recently bought a couple computers (Dell Optiple X GX150) that originally had the XP OS on it; currently, Ubuntu (Linux) resides as the OS (which is a bad thing, in this case).I would like to uninstall/delete ?Ubuntu? and put ?Windows XP? (or any other version for this matter) as my main & ONLY operating system. I have a ?Windows XP Installation Disc? that I TRIED to use and install. I downloaded ?Wine? & ?Crossover?, each opens the .EXE on the disc and allows me to explore. In ?Setup?, it asks: ?What do you want to do?? When I click, ?Install Windows XP?,
View 2 Replies View RelatedError After Installing Windows Xp
Jan 27, 2007I installed windows xp on a new hard drive.Now when I turn the computer on I get an error.A DISK READ ERROR OCCURED press CLT+ALT+DEL to restart when i press CLT+ALT+DEL the computer will restart but I keep getting the same error and windows won't start.
View 9 Replies View RelatedInstalling A CD (error Message)
Dec 25, 2004I'm trying to install a game from a CD and there is an error message which sais," Setup is unable to locate a file it needs to continue. Please make sure the CD-ROM is in the drive and press retry to continue." I click on retry and the error message keeps on appearing.How do I solve this problem?
View 6 Replies View RelatedError When Installing SP3 - Access Is Denied
Apr 25, 2009I have a desktop machine with XP pro and whenever i try to install SP3, i get an "Access is denied" message about half way through the installation.
View 3 Replies View RelatedGetting Error While Installing Service Pack 2 ?
Nov 23, 2007I am getting a Error message as stated below Service Pack 2 Setup Error Service Pack 2 Setup could not backup registry key HKLMSYSTEMCurrentControlSetControl Windows to file C:WINNT$NtServicePackUninstall$ eg003555. 5: Access is denied.I need to install Service Pack 2 for a program.
View 9 Replies View RelatedError 5 When Installing Service Pack 2?
Feb 11, 2010I got an error 5:access denied could not back up registry key when trying to install Service Pack 2 for Windows xp
View 3 Replies View RelatedInstalling Fax Device Results In Getting The Error?
Apr 29, 2008we installed the Microsoft Fax process on an XP Pro PC. It is setup only to send faxes and works great most of the time. However, every once in awhile, it will stop sending faxes even though there are faxes still showing in the Outbox of the Fax Console and Fax Monitor shows Ready to send. What we do see in the Fax Monitor's more>> window is that the last fax said that the fax did not answer, fax was cancelled after about 5 minutes of sitting there trying and it requeued the fax. It then shows a message of Fax Device Error.There is nothing in the Event Logs showing that there is a device problem. Looking at the Printers and Faxes in the Control Panel show the Fax is Ready.
View 2 Replies View RelatedFollowing Error Occured While Installing DSL Software
Mar 27, 2010A small window comes with message " Error loading newdev.dll".After clicking on OK button I got one more window with message:"Administrator privileges are required to install,uninstall,or configure the DSL software".Following troubleshooting steps I have performed:I have downloaded the DSL software from the interned instead of working with the original CD that came with the broadband.
View 18 Replies View RelatedInstalling On IBM Thinkpad Error Reading
Dec 8, 2007I have just received an old laptop from my sister, and had to put a new Hard drive in it as the old one had died. So all going good the Hard drive i could format, then start the installation of windows, until it then begins to state that there are files missing on the disc that it needs for installation. The disc is a legit copy of windows I have purchased and is in good condition with no scratches at all so there is no data missing. further more i installed windows 98 onto it and that was fine... The laptop is not so old as to it wont support XP as it is designed for xp and previously had xp on there.
View 5 Replies View RelatedStop Error (0xF4) When Installing
Oct 3, 2007Over the last two weeks, I've reinstalled Windows five times. I'm literally at my wits end. Here's my problem...
Whenever I try to install almost anything, I get Stop error 0xF4, which is the termination of a system-critical process or thread. Sometimes it happens for no reason, but for the most part, it's usually just when I'm installing something. Unfortunately, I don't have all the parameters of the stop error, but according to the Overclockers Forum, my first parameter (0x03) denotes that it is a process that is being terminated.
There are sometimes when the sfc /scannow command can temporarily fix the problem (that is, to run it before installing an app, then install the application once it is finished) but that's not always the case.
It should also be noted that there are some instances when I get a 0x7A error, but this is seldom. I merely included it in the event that it may prove to be helpful.
I'm running Windows XP Home, with an ASUS A8N-VM-UAYGZ motherboard. I'm sure you guys need more specs than that, and if so, please tell me. Also, I intended to include the Stop error message in it's entirety, but I neglected to write it down (odd, since I've seen it 40+ times). So I will write a follow-up with the Stop error and ...
Error (Stop: 0x0000007B) While Installing PRO
Oct 17, 2009Recently I bought a very cheap Acer Aspire M1640-E1150 which came with an MSI motherboard, an Intel Pentium Dual Core E2200, 2 GB of DDR2 RAM, and a 320 GB HDD from Hitachi. The system came with Vista initially installed on it, and needless to say, it was very slow! I decided to do the right thing and go to XP, so I found all the drivers required and I proceeded to install Pro from a disc that I have from a previous computer. As soon as the screen booted up and the system was being checked by the program, the system gave me an error message, before I even got to partition anything, it was initial. I tried to restart, took one of my RAM sticks out, but nothing was working. I even tried to format the HDD through an external drive, but nothing was working.
The error message is "Stop: 0X0000007B" and something about a virus or a software or a hardware being the problem. The system was running smoothly on Vista, and I even formatted the C drive, and I am sure that there were no viruses.