Error (Stop: 0x0000007B) While Installing PRO
Oct 17, 2009
Recently I bought a very cheap Acer Aspire M1640-E1150 which came with an MSI motherboard, an Intel Pentium Dual Core E2200, 2 GB of DDR2 RAM, and a 320 GB HDD from Hitachi. The system came with Vista initially installed on it, and needless to say, it was very slow! I decided to do the right thing and go to XP, so I found all the drivers required and I proceeded to install Pro from a disc that I have from a previous computer. As soon as the screen booted up and the system was being checked by the program, the system gave me an error message, before I even got to partition anything, it was initial. I tried to restart, took one of my RAM sticks out, but nothing was working. I even tried to format the HDD through an external drive, but nothing was working.
The error message is "Stop: 0X0000007B" and something about a virus or a software or a hardware being the problem. The system was running smoothly on Vista, and I even formatted the C drive, and I am sure that there were no viruses.
View 6 Replies
ADVERTISEMENT
Jul 18, 2008
I put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
View 5 Replies
View Related
Sep 24, 2008
i got a window 2000, that has been used for simple stuff like web browsin, aim ect. and one night it had a hard time shutin down, so i just pressed and help power button, i did same thing next night. well tonight i got the famous STOP: 0x0000007b error (0x8180dc50, 0xc0000032, ect...) error and i was wondering how can i fix this? i found on the other site that 0xc0000032 means that i need to run chkdsk /f, but thats not possible since it wont start
View 6 Replies
View Related
Nov 18, 2004
Major virus infection on computer resulted in fdisk and reformat. I used Win 98SE to fdisk and reformat, as I couldn't for the life of me find a format on the Dell Operating reinstallation CD. (could be first mistake)
Used Win 98 SE startup diskette to start system w/CD rom support.
Navigated to D: Drive which containe the XP OS reinstallation. Navigated to I386 folder and typed WINNT to begin reinstalling files.
Start WIn XP setup and began copying files to HD.
Screen shows: The MS-DOS based portion of setup is complete. Setup will now restart you computer. After your computer restarts, WIN XP Setup will continue. Remove floppy, etc.
Computer restarts - did inspection of system, shows Win XP Setup, loading files (drivers, controllers, etc.)
Starting windows - Welcom to Setup:
1. Setup - press enter
2. Repair (using Repair Console)
3. Quite - F3
Pressed enter
Next message:
Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer. This may involve running a mfg supplied diagnostics or setup program.
Setup cannot continue Press F3
System then attempts reboot, attempts installation again by booting from HD. Then error message:
Stop error:
Stop: 0x0000007b
(0xf7cb063c, 0xc0000034, 0x00000000, 0x00000000)
At this point I must shut off the PC.
System:
Dell Deminsion 4600 series p4 processor @2.4 GHz
512 MD DDR SDRAM @ 400 MHz
128 MB DDR NVidia GeForce FX 5200 graphics card
80GB 7200 RMP Ultra ATA HD
Win XP Pro SP1
48x/24x/48x CD-RW Drive
SoundBlaster Live! w/ 5.1 support
I have looked on MS site for the error code and think I understand that the problem is either a hd controller device driver is not installing from the Dell Reinstallation CD and therefore stops the installation of the software. How I can possibly extract and install the driver setup may be looking for.
View 13 Replies
View Related
Jan 14, 2009
Continually getting STOP: 0x0000007B when installing XP on an Acer Aspire E700. Drive had Vista installed. Have deleted all partitions - drive is empty.
I believe it's related to the SATA drive, but haven't figured a way around it, and time is money.
View 6 Replies
View Related
Sep 1, 2005
Whenever I attempt to reinstall Windows I receive a stop error warning about a possible virus to instructing me to remove any newly installed hard drives
and/ or controllers. I elliminated hard drives disk by disk but was met with the same results. I then elliminated all HDs and my SCSI controller, booting from my XP CDROM.
View 2 Replies
View Related
Aug 28, 2005
I recently upgraded to multiprocessor and new motherboard, now I am getting this stop error message and my hard drive will not enter into windows.
View 9 Replies
View Related
Apr 4, 2006
After powering down during a system restore, my Dell Inspiron 1100 Laptop is caught in the loop that results in the above Blue Screen error. None of the modes work, last known, safe etc.I have read a lot of the posts about restoring that system and am not so concerned about getting the laptop up and running but just recovering the data from that drive - pictures from the laptop.Is this strategy below an option? 1. Purchasing a USD Hard Drive Enclosure. 2. Removing the hard drive from the laptop 3. Connecting the laptop d it to the Enclosure 4. Plugging it into our pc to copy the files. Since the drive will not boot via the laptop, am I right in saying that the drive should be readable as any other drive if connected in the manner above.
View 7 Replies
View Related
Aug 25, 2010
All new system Asus MB core i7 4 gig ram with sata drive. All hardware is up in the bios and recognized. I get the Stop:0X0000007B on install of XP pro service pack 2.
View 2 Replies
View Related
Apr 19, 2010
I have 4 or 5 year old Win XP Home Tiny desktop computer which is having trouble booting. Basically when booting up, right before the Win XP logo it reboots itself.I have disconnected all IDE devices except for the master hard drive (plus disabled them in BIOS), I have tried a different hard drive in the machine that I know is working and has XP Pro installed. The same thing happens with this hard drive - reboots. This hard drive also has Ubuntu installed, and the machine happily boots Ubuntu to the normak desktop, but for some reason won't boot XP!Also tried a third hard drive in this machine that is working with Win 2000 installed, again the same thing happens.
Next I tried the original hard drive in a working seperate machine which produces the same result again.Also tried removing the RAM from the original machine and inserting a stick of working RAM from my other machine which again makes no difference.All hard drives I've tried have the correct jumper setting (primary master).
Also tried putting the Win XP disc in the drive and booting to that, I get to the menu and try to do a repair (R), but a few seconds after the repair begins the system reboots (this is using the original hard drive).Also tried booting into safe mode, and last known good config on all drivers.The hard drive is being detected in POST and in the BIOS which I have set as the first (and only) boot device.When I turn off the auto reboot upon fatal error, I can see the blue screen of death with error code 'Stop 0x0000007B'.So looks like the hard drive might be knackered, but there must be something else aswell because my two other working hard drives don't boot XP (only ubuntu)
View 13 Replies
View Related
Aug 3, 2010
I have a Acer Aspire AM5640-E5520A Intel Pentium 2 QUAD, 2.4GHz with a MCP73PV motherboard and SATA drive. When I try to install XP (which I like better than Vista) the set up acts ok ,loading files, until it gets to "setup is starting windows".. Then I get the BSOD and a message saying STOP:0x0000007b. I have tried to change the bios setting for the HD to IDE but I do not find anything about storage or AHCI. All i see is a place to change raid configuration. Raid is disabled. But i have tried it with raid being enabled.
View 3 Replies
View Related
Nov 6, 2009
I want to downgrade the factory loaded Vista to XP pro on my Acer Aspire M5640 desktop. I found some detailed instructions on line for doing this, but I don't get very far before I get a blue screen error message while the computer is in the process of booting up from the XP disk and loading the files while in windows set-up mode. It reads as follows: "A problem has been detected and windows has been shut down to prevent damage to your computer.
"If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: "Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B (0xF78D6524, 0xC0000034, 0x00000000, 0x00000000)
View 1 Replies
View Related
Feb 5, 2006
Installing windows on a pc built for my friend and it comes up with a stop code.
stop d1. driver_irql_not_less_or_equal then it states
acpi.sys
address fc40d3b4 base at fc3fb000
which i think refers to a stop a1 as well.
ive tried using 2 different type of memory on the m-board and still get the same error.
there are no other hardware besides a cdrom and hdisk, mosue and keyboard. i did have an old logitech mouse but swapped that as i read that can cause problems too.
i dont know how to go about fixing this as their is a hotfix for acpi problems but thatr equires u to actually have windows on teh pc in teh first place i.e safe mode.
i can get into bios and it performs POST no problems. the only other thing is it boots fromcdrom but it says no emulation.
View 6 Replies
View Related
Oct 3, 2007
Over the last two weeks, I've reinstalled Windows five times. I'm literally at my wits end. Here's my problem...
Whenever I try to install almost anything, I get Stop error 0xF4, which is the termination of a system-critical process or thread. Sometimes it happens for no reason, but for the most part, it's usually just when I'm installing something. Unfortunately, I don't have all the parameters of the stop error, but according to the Overclockers Forum, my first parameter (0x03) denotes that it is a process that is being terminated.
There are sometimes when the sfc /scannow command can temporarily fix the problem (that is, to run it before installing an app, then install the application once it is finished) but that's not always the case.
It should also be noted that there are some instances when I get a 0x7A error, but this is seldom. I merely included it in the event that it may prove to be helpful.
I'm running Windows XP Home, with an ASUS A8N-VM-UAYGZ motherboard. I'm sure you guys need more specs than that, and if so, please tell me. Also, I intended to include the Stop error message in it's entirety, but I neglected to write it down (odd, since I've seen it 40+ times). So I will write a follow-up with the Stop error and ...
View 5 Replies
View Related
Mar 13, 2007
I have been trying to fix this problem for about three days now, and I am at the end of my rope. I was installing the Kodak EasyShare Software and when it was almost finished, my PC restarted. I disabled the automatic restart and received the BSOD with the above mentioned stop code. I have rolled back all of my drivers and reupdated them. I have installed new drivers for my chipsets on my motherboard. I can go into Safe Mode with networking with no problems. But as soon as I start Windows normally I get the BSOD. I don't see anything in my startup folders either. I have ran a HiJack this file and found nothing either.
View 7 Replies
View Related
Jan 7, 2009
I have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
View 6 Replies
View Related
May 26, 2010
I'm in the middle of a basic networking lab and one of my VM's crashed. As our host, we use Windows XP. For virtualization we use VMware Workstation. I had a problem installing the Internet Printing Client for my lab. I got an error saying that there wasn't enough hard drive space. I then shut down my VM and added another hard drive. Upon startup I was greeted with: STOP: c0000218 {Registry File Failure} i did this:Removing the virtual HDD I added before the problems started. Restarting the VM. Restarting the host machine. Trying the VM on another machine. Booting to .iso and using the repair console with the command chkdsk C: /r.
View 1 Replies
View Related
Sep 20, 2009
Have three hdd on the first one I've installed Windows XP, on the second one Window 7 as a dual boot, the third has data & games on recovering from several trojans attack, my PC get the BSOD just before loading Windows XP shows the error 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x0000000. if I disconnect hdd 2 and 3 by pulling the power leads out, I can boot in Windows XP with no problems.If I reconnect either hdd I've got the BSOD
View 9 Replies
View Related
Oct 6, 2007
I'm trying to install Windows XP Home Edition on my computer to replace Windows Vista but have a problem. After booting from the CD Windows setup happily inspects the hardware etc etc but upon the Message 'Windows is starting up' I am confronted by a BSOD and Error message 0x0000007b. Windows Vista currently runs fine and reports no problems with any hardware. I tried booting up a Linux distro and it did this quite hapily. Any workarounds for this situation? Is there a BIOS option i should be looking at changing or is my hardware too new for Win XP
View 7 Replies
View Related
Sep 16, 2005
Error message : stop 0xC2 or stop 0x000000C2 ,Error message says pool header has been corrupted.
View 7 Replies
View Related
May 2, 2008
I received the following Stop screen error code after installing SP 3 to my XP Home Edition OS.
Stop:0X0000007E (0XC0000005, 0XF781C756, 0XF79F7430, 0XF79F712C)
I had to reboot in safe mode and uninstall SP3 to get back to normal, which is Service Pack 2. The PC is an HP Compaq SR1520NX with 1GB Ram and 160GB HD with plenty of room. The only hardware I had a bit of trouble with was an Nvidia AGP card which they helped me with updating the driver several months ago. I don't seem to have any problems otherwise with it. Also, I installed a Pinacle USB TV
Tuner. I've had some problems getting it to recognize the tuner occasionally. Sometimes when I unplug it and re-plug it, it works.
How can I tell (from the error code) what is causing the stop screen?
View 6 Replies
View Related
Jul 11, 2005
Now when you visit some sites they will install some program onto your computer.
View 3 Replies
View Related
Jul 26, 2005
Every time I try to install Windows XP x64 on my newly assembled computer I get 0x000000A stop scripts (mostly 0x0000003b)
The farthest ive gotten in the Windows installation was 17 minutes left for completion.
can this be something to do with BIOS? (BIOS is updated)
Computer hardware includes:
-ASUS A8V-E Deluxe motherboard
-AMD Athlon 64 3800+ Processor
-Sapphire ATI Radeon x800 pro Video Card
-Corsair Dual Channel 1gb DDR 400 PC 3200 Memory
-Seagate Barracuda 7200.8 ST3250823AS 250GB 7200 RPM 8MB Cache Serial ATA150 Hard Drive
View 1 Replies
View Related
Mar 15, 2006
The windows installer on my computer keeps popping up every now and then wanting to install a program I had downloaded on the net but do not want anymore. I have deleted the downloaded program file but windows installer still keeps popping up wanting to install the program.
How can I stop windows installer from popping up?
View 7 Replies
View Related
Aug 24, 2005
I have an ailian computer with XP Home on it. After installing sp2 my usb ports stoped working. In device manager the usb root hubs and ports say that they are working but the mouse and game controler do not function. I do not get power to my mouse either.
View 2 Replies
View Related
Mar 8, 2008
I put everything together, went into bios, changed the time. Made sure everything else was alright, (boot order basically) then put in my XP disc (that ive used for computers before) and restarted. It recognized it, went to the windows blue screen where it tried to load everything. Loaded everything (at the bottom in the gray bar) then the last thing it says is "Starting Windows Setup" (or something close to that) the screen flickers and up comes a blue screen saying "A problem has been detected and windows has been shut down to prevent damage to your computer. If is the fi."
Then Technical Information:
*** STOP: 0x0000007e (0xC0000005, 0xF78E0BF, 0xF78DA208, 0xF78D9F08)
*** pci.sys - Address F748E0BF base at F7487000 DateStamp 3b7d855c
At the moment i am completely lost, my only thought was to take out the video card and see if that helped (since it said something about video drivers) but everything is brand new, and plugged in correctly (i believe) so i dont understand what is going on!?
View 13 Replies
View Related
Mar 8, 2008
Hi.I just bought an Asus P5N-D ATX SLI-ready mobo. Have 512 mb of memory to start with so I figured I would set everything up and make adjustments as I received my new parts. Started with a 250 gig Western Digital SATA 1.5 harddrive, a 600 watt Ultra PSU, 512mb of DDR2 PC6400 800fsb single channel, a P4 Dual Core 3.0 processor, and a Windows XP Home Edition 32bit disk. This isnt even close to the setup I plan to use but I thought it would be nice to tweek this processor to see what it would do before I got my new Wolfdale E8400 3.0 processor which I expect great things from. Its the 45nm series. I also have 2 gigs of DDR2 PC6400 800fsb Dual Channel OC memory in shipment. My problem is during my setup I formatted my harddrive for a clean install and when its close to being done I get this error message on the forbidden blue screen: STOP 0x000000A IRQL-NOT-LESS-OR-EQUAL. So I browsed through my BIOS checking settings and ran into this in PCU settings: cache 2x1024 memory. Assuming this could be changed I browsed some more changing settings and taking note of what I changed and what the original settings were,but never could disable the cache. It doesnt seem to be an option at all. I think this is my problem. I think the sytem is trying to access unaccessable memory to finish downloading XP, but I also took note when I was searching the net that it could be a driver issue. If anyone knows anything that may help me resolve this, or if you are aware of a way to disable the cache before downloading an OS, please let me know.
View 4 Replies
View Related
Nov 19, 2008
here is the problem: when I plug in an USB device, windows will install the driver for the device automaticlly if:
1. the driver comes with the system.
2. the device driver has been installed.
I wanna stop windows installing driver automatically but ask me the location of the driver when I plug in a device every time. How do I do that?
View 1 Replies
View Related
Aug 27, 2008
i am trying to install winxp on my wifes older computer....now it is older but it does meet all of the winxp hardware requirements for installation....3 times now it has seemed like it was going to take the installation but I keep getting different stop errors....the 3 I have gotten so far are 0x00000024; 0x000000D1; 0x0000008E .....does anyone know what is going on so i can install winxp already.
View 2 Replies
View Related
Sep 5, 2008
Is there any way in XP to install a device driver manually. I've tried using update driver in the device manager but it tells me I already have the best driver. If I unistall the driver, when I use the add hardware wizard, windows automatically installs its own driver.?
View 1 Replies
View Related
Feb 15, 2008
The computer uses XP home and is set for automatic updates.Every time I switch off it says it is installing update 1 of 1 even if I have not been connected to the net.When I tried using manual update I was told that the installation of <Windows Installer 3.1> had failed.Is the computer trying to install this same thing every time?If it is how do I get it to install properly or remove it from the list of programs ready to be installed?I think that when I installed the drivers for the motherboard this installer, or an earlier version, was installed by the Intel download.
View 11 Replies
View Related
