I have an ailian computer with XP Home on it. After installing sp2 my usb ports stoped working. In device manager the usb root hubs and ports say that they are working but the mouse and game controler do not function. I do not get power to my mouse either.
View 2 RepliesI'm pretty decent with software but this one has completely bemused me. I did a system restore to my computer and all of my usb ports are not responding to anything, at first I thought it was the stuff I already used i.e. mouse and keyboard, but nothing works within the usbs. Tht meant that i couldn't log back on after my system restore because I couldn't type my password in. Then, for some stupid reason I went to change the voltage setting which is random and stupid, and now the computer won't even turn on. Please help as I don't want to have to fork out for a new computer.
View 12 Replies View RelatedNothing I plug into any of my usb2.0 ports will work.I get the message 'USB Device Not Recognized - One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. for assistence in solving this problem click this message'Clicking this message inevitably didnt help.This has only happened today, and I only noticed it after installing Daemon Tools v4.0 which I have now uninstalled which hasnt solved the problem. This could of course be a coincidence.
View 14 Replies View RelatedI didn't use the laptop for about 3-4 months and when I powered it on and it would not boot into Windows. It would get to the Windows 2000 start up screen and just stop responding after the status bar reach about 3/4 way. I tried booting into last known good config with no success and tried booting into Safe Mode with no success so finally I just decided to re-install windows from scratch. I was able to boot from CD and re-format the drive but now I get the blue screen of death after getting about 3/4 of the way through install stating something about a possible hardware change. There have been no changes to the hardware and I have tried several times with the same results.
View 10 Replies View RelatedInstalling windows on a pc built for my friend and it comes up with a stop code.
stop d1. driver_irql_not_less_or_equal then it states
acpi.sys
address fc40d3b4 base at fc3fb000
which i think refers to a stop a1 as well.
ive tried using 2 different type of memory on the m-board and still get the same error.
there are no other hardware besides a cdrom and hdisk, mosue and keyboard. i did have an old logitech mouse but swapped that as i read that can cause problems too.
i dont know how to go about fixing this as their is a hotfix for acpi problems but thatr equires u to actually have windows on teh pc in teh first place i.e safe mode.
i can get into bios and it performs POST no problems. the only other thing is it boots fromcdrom but it says no emulation.
I received the following Stop screen error code after installing SP 3 to my XP Home Edition OS.
Stop:0X0000007E (0XC0000005, 0XF781C756, 0XF79F7430, 0XF79F712C)
I had to reboot in safe mode and uninstall SP3 to get back to normal, which is Service Pack 2. The PC is an HP Compaq SR1520NX with 1GB Ram and 160GB HD with plenty of room. The only hardware I had a bit of trouble with was an Nvidia AGP card which they helped me with updating the driver several months ago. I don't seem to have any problems otherwise with it. Also, I installed a Pinacle USB TV
Tuner. I've had some problems getting it to recognize the tuner occasionally. Sometimes when I unplug it and re-plug it, it works.
How can I tell (from the error code) what is causing the stop screen?
Now when you visit some sites they will install some program onto your computer.
View 3 Replies View RelatedEvery time I try to install Windows XP x64 on my newly assembled computer I get 0x000000A stop scripts (mostly 0x0000003b)
The farthest ive gotten in the Windows installation was 17 minutes left for completion.
can this be something to do with BIOS? (BIOS is updated)
Computer hardware includes:
-ASUS A8V-E Deluxe motherboard
-AMD Athlon 64 3800+ Processor
-Sapphire ATI Radeon x800 pro Video Card
-Corsair Dual Channel 1gb DDR 400 PC 3200 Memory
-Seagate Barracuda 7200.8 ST3250823AS 250GB 7200 RPM 8MB Cache Serial ATA150 Hard Drive
Over the last two weeks, I've reinstalled Windows five times. I'm literally at my wits end. Here's my problem...
Whenever I try to install almost anything, I get Stop error 0xF4, which is the termination of a system-critical process or thread. Sometimes it happens for no reason, but for the most part, it's usually just when I'm installing something. Unfortunately, I don't have all the parameters of the stop error, but according to the Overclockers Forum, my first parameter (0x03) denotes that it is a process that is being terminated.
There are sometimes when the sfc /scannow command can temporarily fix the problem (that is, to run it before installing an app, then install the application once it is finished) but that's not always the case.
It should also be noted that there are some instances when I get a 0x7A error, but this is seldom. I merely included it in the event that it may prove to be helpful.
I'm running Windows XP Home, with an ASUS A8N-VM-UAYGZ motherboard. I'm sure you guys need more specs than that, and if so, please tell me. Also, I intended to include the Stop error message in it's entirety, but I neglected to write it down (odd, since I've seen it 40+ times). So I will write a follow-up with the Stop error and ...
The windows installer on my computer keeps popping up every now and then wanting to install a program I had downloaded on the net but do not want anymore. I have deleted the downloaded program file but windows installer still keeps popping up wanting to install the program.
How can I stop windows installer from popping up?
Recently I bought a very cheap Acer Aspire M1640-E1150 which came with an MSI motherboard, an Intel Pentium Dual Core E2200, 2 GB of DDR2 RAM, and a 320 GB HDD from Hitachi. The system came with Vista initially installed on it, and needless to say, it was very slow! I decided to do the right thing and go to XP, so I found all the drivers required and I proceeded to install Pro from a disc that I have from a previous computer. As soon as the screen booted up and the system was being checked by the program, the system gave me an error message, before I even got to partition anything, it was initial. I tried to restart, took one of my RAM sticks out, but nothing was working. I even tried to format the HDD through an external drive, but nothing was working.
The error message is "Stop: 0X0000007B" and something about a virus or a software or a hardware being the problem. The system was running smoothly on Vista, and I even formatted the C drive, and I am sure that there were no viruses.
Last week I was hit with a multitude of viruses. Since then I've followed
the KRC Anti-Spyware tutorial, I have ewido, spybot (tea timer running), Ad-Aware, etc. and cleaned everythign up, and my system is finally stable again. I even got Norton System works and that helped a lot too. I've been to Windows update and am completely up to date with installs.2 problems still: I still have no audio, and 5 of my USB ports are not working
I put everything together, went into bios, changed the time. Made sure everything else was alright, (boot order basically) then put in my XP disc (that ive used for computers before) and restarted. It recognized it, went to the windows blue screen where it tried to load everything. Loaded everything (at the bottom in the gray bar) then the last thing it says is "Starting Windows Setup" (or something close to that) the screen flickers and up comes a blue screen saying "A problem has been detected and windows has been shut down to prevent damage to your computer. If is the fi."
Then Technical Information:
*** STOP: 0x0000007e (0xC0000005, 0xF78E0BF, 0xF78DA208, 0xF78D9F08)
*** pci.sys - Address F748E0BF base at F7487000 DateStamp 3b7d855c
At the moment i am completely lost, my only thought was to take out the video card and see if that helped (since it said something about video drivers) but everything is brand new, and plugged in correctly (i believe) so i dont understand what is going on!?
Hi.I just bought an Asus P5N-D ATX SLI-ready mobo. Have 512 mb of memory to start with so I figured I would set everything up and make adjustments as I received my new parts. Started with a 250 gig Western Digital SATA 1.5 harddrive, a 600 watt Ultra PSU, 512mb of DDR2 PC6400 800fsb single channel, a P4 Dual Core 3.0 processor, and a Windows XP Home Edition 32bit disk. This isnt even close to the setup I plan to use but I thought it would be nice to tweek this processor to see what it would do before I got my new Wolfdale E8400 3.0 processor which I expect great things from. Its the 45nm series. I also have 2 gigs of DDR2 PC6400 800fsb Dual Channel OC memory in shipment. My problem is during my setup I formatted my harddrive for a clean install and when its close to being done I get this error message on the forbidden blue screen: STOP 0x000000A IRQL-NOT-LESS-OR-EQUAL. So I browsed through my BIOS checking settings and ran into this in PCU settings: cache 2x1024 memory. Assuming this could be changed I browsed some more changing settings and taking note of what I changed and what the original settings were,but never could disable the cache. It doesnt seem to be an option at all. I think this is my problem. I think the sytem is trying to access unaccessable memory to finish downloading XP, but I also took note when I was searching the net that it could be a driver issue. If anyone knows anything that may help me resolve this, or if you are aware of a way to disable the cache before downloading an OS, please let me know.
View 4 Replies View Relatedhere is the problem: when I plug in an USB device, windows will install the driver for the device automaticlly if:
1. the driver comes with the system.
2. the device driver has been installed.
I wanna stop windows installing driver automatically but ask me the location of the driver when I plug in a device every time. How do I do that?
i am trying to install winxp on my wifes older computer....now it is older but it does meet all of the winxp hardware requirements for installation....3 times now it has seemed like it was going to take the installation but I keep getting different stop errors....the 3 I have gotten so far are 0x00000024; 0x000000D1; 0x0000008E .....does anyone know what is going on so i can install winxp already.
View 2 Replies View RelatedIs there any way in XP to install a device driver manually. I've tried using update driver in the device manager but it tells me I already have the best driver. If I unistall the driver, when I use the add hardware wizard, windows automatically installs its own driver.?
View 1 Replies View RelatedThe computer uses XP home and is set for automatic updates.Every time I switch off it says it is installing update 1 of 1 even if I have not been connected to the net.When I tried using manual update I was told that the installation of <Windows Installer 3.1> had failed.Is the computer trying to install this same thing every time?If it is how do I get it to install properly or remove it from the list of programs ready to be installed?I think that when I installed the drivers for the motherboard this installer, or an earlier version, was installed by the Intel download.
View 11 Replies View RelatedI put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
View 5 Replies View RelatedI have been trying to fix this problem for about three days now, and I am at the end of my rope. I was installing the Kodak EasyShare Software and when it was almost finished, my PC restarted. I disabled the automatic restart and received the BSOD with the above mentioned stop code. I have rolled back all of my drivers and reupdated them. I have installed new drivers for my chipsets on my motherboard. I can go into Safe Mode with networking with no problems. But as soon as I start Windows normally I get the BSOD. I don't see anything in my startup folders either. I have ran a HiJack this file and found nothing either.
View 7 Replies View RelatedI have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
I'm in the middle of a basic networking lab and one of my VM's crashed. As our host, we use Windows XP. For virtualization we use VMware Workstation. I had a problem installing the Internet Printing Client for my lab. I got an error saying that there wasn't enough hard drive space. I then shut down my VM and added another hard drive. Upon startup I was greeted with: STOP: c0000218 {Registry File Failure} i did this:Removing the virtual HDD I added before the problems started. Restarting the VM. Restarting the host machine. Trying the VM on another machine. Booting to .iso and using the repair console with the command chkdsk C: /r.
Error message : stop 0xC2 or stop 0x000000C2 ,Error message says pool header has been corrupted.
View 7 Replies View Relatedi went a bought a digital camera, cept i only have 2 usb ports on my tower, can i add more? one port is for my mouse, and the other is for my printer, i have a lexmark 1185, but the camera needs a usb port to plug it in.
View 13 Replies View RelatedMajor virus infection on computer resulted in fdisk and reformat. I used Win 98SE to fdisk and reformat, as I couldn't for the life of me find a format on the Dell Operating reinstallation CD. (could be first mistake)
Used Win 98 SE startup diskette to start system w/CD rom support.
Navigated to D: Drive which containe the XP OS reinstallation. Navigated to I386 folder and typed WINNT to begin reinstalling files.
Start WIn XP setup and began copying files to HD.
Screen shows: The MS-DOS based portion of setup is complete. Setup will now restart you computer. After your computer restarts, WIN XP Setup will continue. Remove floppy, etc.
Computer restarts - did inspection of system, shows Win XP Setup, loading files (drivers, controllers, etc.)
Starting windows - Welcom to Setup:
1. Setup - press enter
2. Repair (using Repair Console)
3. Quite - F3
Pressed enter
Next message:
Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer. This may involve running a mfg supplied diagnostics or setup program.
Setup cannot continue Press F3
System then attempts reboot, attempts installation again by booting from HD. Then error message:
Stop error:
Stop: 0x0000007b
(0xf7cb063c, 0xc0000034, 0x00000000, 0x00000000)
At this point I must shut off the PC.
System:
Dell Deminsion 4600 series p4 processor @2.4 GHz
512 MD DDR SDRAM @ 400 MHz
128 MB DDR NVidia GeForce FX 5200 graphics card
80GB 7200 RMP Ultra ATA HD
Win XP Pro SP1
48x/24x/48x CD-RW Drive
SoundBlaster Live! w/ 5.1 support
I have looked on MS site for the error code and think I understand that the problem is either a hd controller device driver is not installing from the Dell Reinstallation CD and therefore stops the installation of the software. How I can possibly extract and install the driver setup may be looking for.
STOP 0x00000050 (0x8CCC1345, 0x0000001, 0x808A65A1, 0x00000000) These both happen when installing windows, either when at 95% of copying files or when booting into windows.
View 7 Replies View RelatedI am trying to get BitPim to work, for those of you who don't know it is an application that will give you access to your cell phone so you can create your own ringtones and what not.
The problem is that it keeps telling me that the COM port is not available.
Is there a way for me to run any report that will tell me what applications are using what COM ports, or how to make a COM port available.
any suggestion?
i have four usb ports all of them are not working
View 1 Replies View RelatedI play online first person shooter games and today my mx510 mouse started malfunctioning. I'd be playing and my mouse would just completely stop working, anywhere from 1-10 or so seconds. I tried using a different mouse, a mx500 and I still get the same problem. I've tried different usb ports, different mouses, and anything I could think of. These malfuntioning occurences happen quite often, maybe 2-3 times every five minutes, and my mouse completely turns off for whatever amount of time. My computer is about 3 years old, but I keep it running like the day I bought it. I plan on formatting really soon, within the next few days and that might solve the problem. Please let me know of any reason this problem is occuring, and what I can do to fix it
View 1 Replies View RelatedI plugged in a digital camera to my Toshiba laptop, but it won't recognize the camera, it also did this with my palm pilot too.
View 7 Replies View RelatedSince I've formatted my computer, it started being slow and I don't know why. Do you have any tool that would help diagnostic the cause of my problem? My USB ports do not work either.
View 11 Replies View Related