STOP:0x000000A (Problems Installing On My New System)
Mar 8, 2008
Hi.I just bought an Asus P5N-D ATX SLI-ready mobo. Have 512 mb of memory to start with so I figured I would set everything up and make adjustments as I received my new parts. Started with a 250 gig Western Digital SATA 1.5 harddrive, a 600 watt Ultra PSU, 512mb of DDR2 PC6400 800fsb single channel, a P4 Dual Core 3.0 processor, and a Windows XP Home Edition 32bit disk. This isnt even close to the setup I plan to use but I thought it would be nice to tweek this processor to see what it would do before I got my new Wolfdale E8400 3.0 processor which I expect great things from. Its the 45nm series. I also have 2 gigs of DDR2 PC6400 800fsb Dual Channel OC memory in shipment. My problem is during my setup I formatted my harddrive for a clean install and when its close to being done I get this error message on the forbidden blue screen: STOP 0x000000A IRQL-NOT-LESS-OR-EQUAL. So I browsed through my BIOS checking settings and ran into this in PCU settings: cache 2x1024 memory. Assuming this could be changed I browsed some more changing settings and taking note of what I changed and what the original settings were,but never could disable the cache. It doesnt seem to be an option at all. I think this is my problem. I think the sytem is trying to access unaccessable memory to finish downloading XP, but I also took note when I was searching the net that it could be a driver issue. If anyone knows anything that may help me resolve this, or if you are aware of a way to disable the cache before downloading an OS, please let me know.
View 4 Replies
ADVERTISEMENT
Aug 27, 2008
i am trying to install winxp on my wifes older computer....now it is older but it does meet all of the winxp hardware requirements for installation....3 times now it has seemed like it was going to take the installation but I keep getting different stop errors....the 3 I have gotten so far are 0x00000024; 0x000000D1; 0x0000008E .....does anyone know what is going on so i can install winxp already.
View 2 Replies
View Related
Feb 15, 2008
The computer uses XP home and is set for automatic updates.Every time I switch off it says it is installing update 1 of 1 even if I have not been connected to the net.When I tried using manual update I was told that the installation of <Windows Installer 3.1> had failed.Is the computer trying to install this same thing every time?If it is how do I get it to install properly or remove it from the list of programs ready to be installed?I think that when I installed the drivers for the motherboard this installer, or an earlier version, was installed by the Intel download.
View 11 Replies
View Related
Oct 14, 2007
Alright, I've had this computer for about a yearfirst started getting BSODs on the first day before ever putting anything on the computerIt wasn't a big enough issue then and I didn't buy a warranty for the computer but I am still getting these BSODS.I'm getting the 0x000000A IRQL Not Less or EqualI've taken my computer to the repair shop SIX TIMES and it's still not solved It happens ALL THE TIME.sometimes every 5 mins, no matter what I'm doing I get a BSOD.
View 12 Replies
View Related
Feb 5, 2006
Installing windows on a pc built for my friend and it comes up with a stop code.
stop d1. driver_irql_not_less_or_equal then it states
acpi.sys
address fc40d3b4 base at fc3fb000
which i think refers to a stop a1 as well.
ive tried using 2 different type of memory on the m-board and still get the same error.
there are no other hardware besides a cdrom and hdisk, mosue and keyboard. i did have an old logitech mouse but swapped that as i read that can cause problems too.
i dont know how to go about fixing this as their is a hotfix for acpi problems but thatr equires u to actually have windows on teh pc in teh first place i.e safe mode.
i can get into bios and it performs POST no problems. the only other thing is it boots fromcdrom but it says no emulation.
View 6 Replies
View Related
May 2, 2008
I received the following Stop screen error code after installing SP 3 to my XP Home Edition OS.
Stop:0X0000007E (0XC0000005, 0XF781C756, 0XF79F7430, 0XF79F712C)
I had to reboot in safe mode and uninstall SP3 to get back to normal, which is Service Pack 2. The PC is an HP Compaq SR1520NX with 1GB Ram and 160GB HD with plenty of room. The only hardware I had a bit of trouble with was an Nvidia AGP card which they helped me with updating the driver several months ago. I don't seem to have any problems otherwise with it. Also, I installed a Pinacle USB TV
Tuner. I've had some problems getting it to recognize the tuner occasionally. Sometimes when I unplug it and re-plug it, it works.
How can I tell (from the error code) what is causing the stop screen?
View 6 Replies
View Related
Jul 11, 2005
Now when you visit some sites they will install some program onto your computer.
View 3 Replies
View Related
Jul 26, 2005
Every time I try to install Windows XP x64 on my newly assembled computer I get 0x000000A stop scripts (mostly 0x0000003b)
The farthest ive gotten in the Windows installation was 17 minutes left for completion.
can this be something to do with BIOS? (BIOS is updated)
Computer hardware includes:
-ASUS A8V-E Deluxe motherboard
-AMD Athlon 64 3800+ Processor
-Sapphire ATI Radeon x800 pro Video Card
-Corsair Dual Channel 1gb DDR 400 PC 3200 Memory
-Seagate Barracuda 7200.8 ST3250823AS 250GB 7200 RPM 8MB Cache Serial ATA150 Hard Drive
View 1 Replies
View Related
Oct 3, 2007
Over the last two weeks, I've reinstalled Windows five times. I'm literally at my wits end. Here's my problem...
Whenever I try to install almost anything, I get Stop error 0xF4, which is the termination of a system-critical process or thread. Sometimes it happens for no reason, but for the most part, it's usually just when I'm installing something. Unfortunately, I don't have all the parameters of the stop error, but according to the Overclockers Forum, my first parameter (0x03) denotes that it is a process that is being terminated.
There are sometimes when the sfc /scannow command can temporarily fix the problem (that is, to run it before installing an app, then install the application once it is finished) but that's not always the case.
It should also be noted that there are some instances when I get a 0x7A error, but this is seldom. I merely included it in the event that it may prove to be helpful.
I'm running Windows XP Home, with an ASUS A8N-VM-UAYGZ motherboard. I'm sure you guys need more specs than that, and if so, please tell me. Also, I intended to include the Stop error message in it's entirety, but I neglected to write it down (odd, since I've seen it 40+ times). So I will write a follow-up with the Stop error and ...
View 5 Replies
View Related
Mar 15, 2006
The windows installer on my computer keeps popping up every now and then wanting to install a program I had downloaded on the net but do not want anymore. I have deleted the downloaded program file but windows installer still keeps popping up wanting to install the program.
How can I stop windows installer from popping up?
View 7 Replies
View Related
Oct 17, 2009
Recently I bought a very cheap Acer Aspire M1640-E1150 which came with an MSI motherboard, an Intel Pentium Dual Core E2200, 2 GB of DDR2 RAM, and a 320 GB HDD from Hitachi. The system came with Vista initially installed on it, and needless to say, it was very slow! I decided to do the right thing and go to XP, so I found all the drivers required and I proceeded to install Pro from a disc that I have from a previous computer. As soon as the screen booted up and the system was being checked by the program, the system gave me an error message, before I even got to partition anything, it was initial. I tried to restart, took one of my RAM sticks out, but nothing was working. I even tried to format the HDD through an external drive, but nothing was working.
The error message is "Stop: 0X0000007B" and something about a virus or a software or a hardware being the problem. The system was running smoothly on Vista, and I even formatted the C drive, and I am sure that there were no viruses.
View 6 Replies
View Related
Aug 24, 2005
I have an ailian computer with XP Home on it. After installing sp2 my usb ports stoped working. In device manager the usb root hubs and ports say that they are working but the mouse and game controler do not function. I do not get power to my mouse either.
View 2 Replies
View Related
Mar 8, 2008
I put everything together, went into bios, changed the time. Made sure everything else was alright, (boot order basically) then put in my XP disc (that ive used for computers before) and restarted. It recognized it, went to the windows blue screen where it tried to load everything. Loaded everything (at the bottom in the gray bar) then the last thing it says is "Starting Windows Setup" (or something close to that) the screen flickers and up comes a blue screen saying "A problem has been detected and windows has been shut down to prevent damage to your computer. If is the fi."
Then Technical Information:
*** STOP: 0x0000007e (0xC0000005, 0xF78E0BF, 0xF78DA208, 0xF78D9F08)
*** pci.sys - Address F748E0BF base at F7487000 DateStamp 3b7d855c
At the moment i am completely lost, my only thought was to take out the video card and see if that helped (since it said something about video drivers) but everything is brand new, and plugged in correctly (i believe) so i dont understand what is going on!?
View 13 Replies
View Related
Nov 19, 2008
here is the problem: when I plug in an USB device, windows will install the driver for the device automaticlly if:
1. the driver comes with the system.
2. the device driver has been installed.
I wanna stop windows installing driver automatically but ask me the location of the driver when I plug in a device every time. How do I do that?
View 1 Replies
View Related
Sep 5, 2008
Is there any way in XP to install a device driver manually. I've tried using update driver in the device manager but it tells me I already have the best driver. If I unistall the driver, when I use the add hardware wizard, windows automatically installs its own driver.?
View 1 Replies
View Related
Jul 18, 2008
I put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
View 5 Replies
View Related
Mar 13, 2007
I have been trying to fix this problem for about three days now, and I am at the end of my rope. I was installing the Kodak EasyShare Software and when it was almost finished, my PC restarted. I disabled the automatic restart and received the BSOD with the above mentioned stop code. I have rolled back all of my drivers and reupdated them. I have installed new drivers for my chipsets on my motherboard. I can go into Safe Mode with networking with no problems. But as soon as I start Windows normally I get the BSOD. I don't see anything in my startup folders either. I have ran a HiJack this file and found nothing either.
View 7 Replies
View Related
Jan 7, 2009
I have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
View 6 Replies
View Related
May 26, 2010
I'm in the middle of a basic networking lab and one of my VM's crashed. As our host, we use Windows XP. For virtualization we use VMware Workstation. I had a problem installing the Internet Printing Client for my lab. I got an error saying that there wasn't enough hard drive space. I then shut down my VM and added another hard drive. Upon startup I was greeted with: STOP: c0000218 {Registry File Failure} i did this:Removing the virtual HDD I added before the problems started. Restarting the VM. Restarting the host machine. Trying the VM on another machine. Booting to .iso and using the repair console with the command chkdsk C: /r.
View 1 Replies
View Related
Dec 19, 2007
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
View 7 Replies
View Related
Oct 30, 2009
How can I stop the System Idle Process, while the computer needs to be working at other tasks.. At times it will run for hours, and slows to a crawl all of my regular usage of the computer.
View 1 Replies
View Related
Jun 12, 2005
I am having such problems with my computer! I am sure that there are a million reasons why computers lock up, not blue screen of death, but rather just simply lock up. The screen stays on exactly what I am working on, but I can't do anything. The mouse is locked up, control alt delete doesn't work nothing works. It mostly happens while I am on the net, but sometimes happens in word also. I have checked RAM, heat and power supply and all of those things checked out fine. I added more RAM thinking that might be the problem but nop.
View 13 Replies
View Related
Jul 8, 2008
This error comes up no matter how I try to boot my Computer.Disable or uninstall any anti viruse, disk defragmanation or backup utilities... Then it goes on like that, and the technical information: STOP: 0x00000024 (0x001902FE 0xF7CDE6DC 0xF7CDE3D8 0xF731BF81) It started happening after I ran the new AVG Free 8.0 virus scanner. So maybe that's the problem? So far I haven't been able to even run in safe mode to disable it.
View 14 Replies
View Related
Feb 22, 2009
I have a Sony Vaio VGN NR160 E which came with Vista Home Premium. Actually it's crashing repeatedly because of an outdate touch pad driver "apfiltr.sys". But I have not been able to find a newer updated version for the same! So I am thinking of reverting back to Win XP.
View 14 Replies
View Related
Dec 14, 2009
Has anyone got an idea of how i can permanently stop TSR's (systems started processes) from starting on system boot? System is XP
View 2 Replies
View Related
Dec 6, 2008
I recently purchased a new Hard Drive from Western Digital. It's an Internal 500Gb, and its been running so-so. It's sort of loud, mainly as it sort of vibrates the case of the computer (I have one panel off as the cord im using wont fit). Aside from that ive had no problems.What I'm worried about though, are these STOP errors that occasionally pop up Quote: "MEMORY MANAGEMENT - STOP 0x0000001A (0x00041284, 0x0E586001, 0x000015BC, 0xC0883000)" I know that ...0014a has something to do with memory or RAM, and that 0x00041284 is "0x41284A PTE or the working set list is corrupted." according to MSDN.
View 3 Replies
View Related
Dec 31, 2008
stop device will not run in this operating system.... I get this message at the start up of my computer and will not continue to boot up until I clear it.
View 5 Replies
View Related
Aug 9, 2005
How do I stop certain system tray icons from hiding? I have tried the properties/customize/always show options but this does not seem to work. Also in this list here are a number of icons that belong to programs that are no longer on my laptop. Is there a way to:
1) edit this list
2) make certain icons always display (e.g. ac/battery) but hide others.
View 2 Replies
View Related
Aug 9, 2005
I have just installed a new Seagate SATA 200GB hard drive (ST3200822AS) and partitioned and formatted it with Partition Magic 8.0 into 3 separate logical
partitions. The partitions have a cluster size of 8K and are under the NTFS 3.1 (Windows XP) file system.
View 3 Replies
View Related
Aug 8, 2005
I have just installed a new Seagate SATA 200GB hard drive (ST3200822AS) and partitioned and formatted it with Partition Magic 8.0 into 3 separate logical
partitions. The partitions have a cluster size of 8K and are under the NTFS 3.1 (Windows XP) file system.
View 2 Replies
View Related
Oct 9, 2010
I am getting the blue screen of death with 7E error code. It gives me the standard message at top.This is the ONLY information listed where it says TECHNICAL INFORMATION:STOP: 0x0000007E (0xC0000005, 0x8A98AAB3, 0xBA513B98, 0xBA513894)I've tried system restore with no success. I have added no hardware or software recently. This started unexpectantly yesterday. The night before I went to a website and it was not a trusted website and I "x'd" out of it. The next day it does this.
View 7 Replies
View Related
