Stop Scripts While Installing X64
Jul 26, 2005
Every time I try to install Windows XP x64 on my newly assembled computer I get 0x000000A stop scripts (mostly 0x0000003b)
The farthest ive gotten in the Windows installation was 17 minutes left for completion.
can this be something to do with BIOS? (BIOS is updated)
Computer hardware includes:
-ASUS A8V-E Deluxe motherboard
-AMD Athlon 64 3800+ Processor
-Sapphire ATI Radeon x800 pro Video Card
-Corsair Dual Channel 1gb DDR 400 PC 3200 Memory
-Seagate Barracuda 7200.8 ST3250823AS 250GB 7200 RPM 8MB Cache Serial ATA150 Hard Drive
View 1 Replies
ADVERTISEMENT
Feb 5, 2006
Installing windows on a pc built for my friend and it comes up with a stop code.
stop d1. driver_irql_not_less_or_equal then it states
acpi.sys
address fc40d3b4 base at fc3fb000
which i think refers to a stop a1 as well.
ive tried using 2 different type of memory on the m-board and still get the same error.
there are no other hardware besides a cdrom and hdisk, mosue and keyboard. i did have an old logitech mouse but swapped that as i read that can cause problems too.
i dont know how to go about fixing this as their is a hotfix for acpi problems but thatr equires u to actually have windows on teh pc in teh first place i.e safe mode.
i can get into bios and it performs POST no problems. the only other thing is it boots fromcdrom but it says no emulation.
View 6 Replies
View Related
May 2, 2008
I received the following Stop screen error code after installing SP 3 to my XP Home Edition OS.
Stop:0X0000007E (0XC0000005, 0XF781C756, 0XF79F7430, 0XF79F712C)
I had to reboot in safe mode and uninstall SP3 to get back to normal, which is Service Pack 2. The PC is an HP Compaq SR1520NX with 1GB Ram and 160GB HD with plenty of room. The only hardware I had a bit of trouble with was an Nvidia AGP card which they helped me with updating the driver several months ago. I don't seem to have any problems otherwise with it. Also, I installed a Pinacle USB TV
Tuner. I've had some problems getting it to recognize the tuner occasionally. Sometimes when I unplug it and re-plug it, it works.
How can I tell (from the error code) what is causing the stop screen?
View 6 Replies
View Related
Jul 11, 2005
Now when you visit some sites they will install some program onto your computer.
View 3 Replies
View Related
Oct 3, 2007
Over the last two weeks, I've reinstalled Windows five times. I'm literally at my wits end. Here's my problem...
Whenever I try to install almost anything, I get Stop error 0xF4, which is the termination of a system-critical process or thread. Sometimes it happens for no reason, but for the most part, it's usually just when I'm installing something. Unfortunately, I don't have all the parameters of the stop error, but according to the Overclockers Forum, my first parameter (0x03) denotes that it is a process that is being terminated.
There are sometimes when the sfc /scannow command can temporarily fix the problem (that is, to run it before installing an app, then install the application once it is finished) but that's not always the case.
It should also be noted that there are some instances when I get a 0x7A error, but this is seldom. I merely included it in the event that it may prove to be helpful.
I'm running Windows XP Home, with an ASUS A8N-VM-UAYGZ motherboard. I'm sure you guys need more specs than that, and if so, please tell me. Also, I intended to include the Stop error message in it's entirety, but I neglected to write it down (odd, since I've seen it 40+ times). So I will write a follow-up with the Stop error and ...
View 5 Replies
View Related
Mar 15, 2006
The windows installer on my computer keeps popping up every now and then wanting to install a program I had downloaded on the net but do not want anymore. I have deleted the downloaded program file but windows installer still keeps popping up wanting to install the program.
How can I stop windows installer from popping up?
View 7 Replies
View Related
Oct 17, 2009
Recently I bought a very cheap Acer Aspire M1640-E1150 which came with an MSI motherboard, an Intel Pentium Dual Core E2200, 2 GB of DDR2 RAM, and a 320 GB HDD from Hitachi. The system came with Vista initially installed on it, and needless to say, it was very slow! I decided to do the right thing and go to XP, so I found all the drivers required and I proceeded to install Pro from a disc that I have from a previous computer. As soon as the screen booted up and the system was being checked by the program, the system gave me an error message, before I even got to partition anything, it was initial. I tried to restart, took one of my RAM sticks out, but nothing was working. I even tried to format the HDD through an external drive, but nothing was working.
The error message is "Stop: 0X0000007B" and something about a virus or a software or a hardware being the problem. The system was running smoothly on Vista, and I even formatted the C drive, and I am sure that there were no viruses.
View 6 Replies
View Related
Aug 24, 2005
I have an ailian computer with XP Home on it. After installing sp2 my usb ports stoped working. In device manager the usb root hubs and ports say that they are working but the mouse and game controler do not function. I do not get power to my mouse either.
View 2 Replies
View Related
Mar 8, 2008
I put everything together, went into bios, changed the time. Made sure everything else was alright, (boot order basically) then put in my XP disc (that ive used for computers before) and restarted. It recognized it, went to the windows blue screen where it tried to load everything. Loaded everything (at the bottom in the gray bar) then the last thing it says is "Starting Windows Setup" (or something close to that) the screen flickers and up comes a blue screen saying "A problem has been detected and windows has been shut down to prevent damage to your computer. If is the fi."
Then Technical Information:
*** STOP: 0x0000007e (0xC0000005, 0xF78E0BF, 0xF78DA208, 0xF78D9F08)
*** pci.sys - Address F748E0BF base at F7487000 DateStamp 3b7d855c
At the moment i am completely lost, my only thought was to take out the video card and see if that helped (since it said something about video drivers) but everything is brand new, and plugged in correctly (i believe) so i dont understand what is going on!?
View 13 Replies
View Related
Mar 8, 2008
Hi.I just bought an Asus P5N-D ATX SLI-ready mobo. Have 512 mb of memory to start with so I figured I would set everything up and make adjustments as I received my new parts. Started with a 250 gig Western Digital SATA 1.5 harddrive, a 600 watt Ultra PSU, 512mb of DDR2 PC6400 800fsb single channel, a P4 Dual Core 3.0 processor, and a Windows XP Home Edition 32bit disk. This isnt even close to the setup I plan to use but I thought it would be nice to tweek this processor to see what it would do before I got my new Wolfdale E8400 3.0 processor which I expect great things from. Its the 45nm series. I also have 2 gigs of DDR2 PC6400 800fsb Dual Channel OC memory in shipment. My problem is during my setup I formatted my harddrive for a clean install and when its close to being done I get this error message on the forbidden blue screen: STOP 0x000000A IRQL-NOT-LESS-OR-EQUAL. So I browsed through my BIOS checking settings and ran into this in PCU settings: cache 2x1024 memory. Assuming this could be changed I browsed some more changing settings and taking note of what I changed and what the original settings were,but never could disable the cache. It doesnt seem to be an option at all. I think this is my problem. I think the sytem is trying to access unaccessable memory to finish downloading XP, but I also took note when I was searching the net that it could be a driver issue. If anyone knows anything that may help me resolve this, or if you are aware of a way to disable the cache before downloading an OS, please let me know.
View 4 Replies
View Related
Nov 19, 2008
here is the problem: when I plug in an USB device, windows will install the driver for the device automaticlly if:
1. the driver comes with the system.
2. the device driver has been installed.
I wanna stop windows installing driver automatically but ask me the location of the driver when I plug in a device every time. How do I do that?
View 1 Replies
View Related
Aug 27, 2008
i am trying to install winxp on my wifes older computer....now it is older but it does meet all of the winxp hardware requirements for installation....3 times now it has seemed like it was going to take the installation but I keep getting different stop errors....the 3 I have gotten so far are 0x00000024; 0x000000D1; 0x0000008E .....does anyone know what is going on so i can install winxp already.
View 2 Replies
View Related
Sep 5, 2008
Is there any way in XP to install a device driver manually. I've tried using update driver in the device manager but it tells me I already have the best driver. If I unistall the driver, when I use the add hardware wizard, windows automatically installs its own driver.?
View 1 Replies
View Related
Feb 15, 2008
The computer uses XP home and is set for automatic updates.Every time I switch off it says it is installing update 1 of 1 even if I have not been connected to the net.When I tried using manual update I was told that the installation of <Windows Installer 3.1> had failed.Is the computer trying to install this same thing every time?If it is how do I get it to install properly or remove it from the list of programs ready to be installed?I think that when I installed the drivers for the motherboard this installer, or an earlier version, was installed by the Intel download.
View 11 Replies
View Related
Jul 18, 2008
I put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
View 5 Replies
View Related
Mar 13, 2007
I have been trying to fix this problem for about three days now, and I am at the end of my rope. I was installing the Kodak EasyShare Software and when it was almost finished, my PC restarted. I disabled the automatic restart and received the BSOD with the above mentioned stop code. I have rolled back all of my drivers and reupdated them. I have installed new drivers for my chipsets on my motherboard. I can go into Safe Mode with networking with no problems. But as soon as I start Windows normally I get the BSOD. I don't see anything in my startup folders either. I have ran a HiJack this file and found nothing either.
View 7 Replies
View Related
Jan 7, 2009
I have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
View 6 Replies
View Related
May 26, 2010
I'm in the middle of a basic networking lab and one of my VM's crashed. As our host, we use Windows XP. For virtualization we use VMware Workstation. I had a problem installing the Internet Printing Client for my lab. I got an error saying that there wasn't enough hard drive space. I then shut down my VM and added another hard drive. Upon startup I was greeted with: STOP: c0000218 {Registry File Failure} i did this:Removing the virtual HDD I added before the problems started. Restarting the VM. Restarting the host machine. Trying the VM on another machine. Booting to .iso and using the repair console with the command chkdsk C: /r.
View 1 Replies
View Related
Sep 16, 2005
Error message : stop 0xC2 or stop 0x000000C2 ,Error message says pool header has been corrupted.
View 7 Replies
View Related
Nov 18, 2004
Major virus infection on computer resulted in fdisk and reformat. I used Win 98SE to fdisk and reformat, as I couldn't for the life of me find a format on the Dell Operating reinstallation CD. (could be first mistake)
Used Win 98 SE startup diskette to start system w/CD rom support.
Navigated to D: Drive which containe the XP OS reinstallation. Navigated to I386 folder and typed WINNT to begin reinstalling files.
Start WIn XP setup and began copying files to HD.
Screen shows: The MS-DOS based portion of setup is complete. Setup will now restart you computer. After your computer restarts, WIN XP Setup will continue. Remove floppy, etc.
Computer restarts - did inspection of system, shows Win XP Setup, loading files (drivers, controllers, etc.)
Starting windows - Welcom to Setup:
1. Setup - press enter
2. Repair (using Repair Console)
3. Quite - F3
Pressed enter
Next message:
Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer. This may involve running a mfg supplied diagnostics or setup program.
Setup cannot continue Press F3
System then attempts reboot, attempts installation again by booting from HD. Then error message:
Stop error:
Stop: 0x0000007b
(0xf7cb063c, 0xc0000034, 0x00000000, 0x00000000)
At this point I must shut off the PC.
System:
Dell Deminsion 4600 series p4 processor @2.4 GHz
512 MD DDR SDRAM @ 400 MHz
128 MB DDR NVidia GeForce FX 5200 graphics card
80GB 7200 RMP Ultra ATA HD
Win XP Pro SP1
48x/24x/48x CD-RW Drive
SoundBlaster Live! w/ 5.1 support
I have looked on MS site for the error code and think I understand that the problem is either a hd controller device driver is not installing from the Dell Reinstallation CD and therefore stops the installation of the software. How I can possibly extract and install the driver setup may be looking for.
View 13 Replies
View Related
Jun 9, 2008
STOP 0x00000050 (0x8CCC1345, 0x0000001, 0x808A65A1, 0x00000000) These both happen when installing windows, either when at 95% of copying files or when booting into windows.
View 7 Replies
View Related
Dec 20, 2006
I install Server 2003 Standard SP1 downloaded and installed on a PII 400, 256Mb RAM with IIS, ASP.Net 2.0, SQL server 2000 SP4, Mysql 5, and PHP5, and all without a single hitch...too good to be true. I went ahead and tried on what will be my server PIII600, 512 MB RAM, First try, Server 2003 couldn't find a file when installing, retried and it worked. Downloaded SP1 and when I was extracting it said "file is corrupt", downloaded 4 more times with same result. reformatted and reinstalled 5 more times and cannot get past "file is corrupt" on SP1 and sometimes extracting the .Net 2.0 installer got the same error. I swap all hardware with PC from first try (except RAM, Mobo, CPU, CDROM) with no change. Win98 and XP installed fine on the second PC just can't get server 2003
View 3 Replies
View Related
Feb 19, 2005
I recently installed xp for the first time after replacing motherboard and CPU.I skipped setup because I didn't know what I was doing. Now I can't boot up (cold or warm) without using the original disk. Can I just go into setup and change boot settings without re-installing.Is there anything else I should know before I attempt to fix this problem? I am tired of using the disk every time I update something or install new program.
View 14 Replies
View Related
Apr 19, 2008
I've been casually looking for a new laptop for my Mom for her first computer. Now I am ready to get one, but just about the only choice is something pre-loaded with Vista. I have no experience with Vista and have heard more bad than good about it, therefore I think it would be easier to get her up and running if we're not both having to learn a new OS.
I upgraded my computer from ME to XP with few problems but wondered how difficult it would be to take a new laptop and go backwards. I know I'd most likely have to purchase a Full version of XP, but how much of a hassel is it to get all the drivers/XP versions of necessary pre-loaded software? Would a Vista compatible version of say Word work if I did this? Any other problems I haven't thought of?
View 13 Replies
View Related
Mar 6, 2010
I re-formated my sisters computer yesterday, and after installing it i had no internet. As i hadn't installed any drivers yet, i understood that. But after heading over to dell's site, downloading all of the drivers for her computer and then installing them, i STILL do not have any internet. I don't see any connections on the computer either, it's just blank!
View 4 Replies
View Related
Oct 31, 2009
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:50:51 PM, on 10/31/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32svchost.exe
C:WINDOWSSystem32svchost.exe
C:WINDOWSsystem32spoolsv.exe
C:WINDOWSExplorer.EXE
C:PROGRA~1AVGAVG8avgwdsvc.exe
C:Program FilesYahoo!Search ProtectionSearchProtection.exe
C:Program FilesDigital Media Readershwiconem.exe
C:Program FilesLexmark 1300 Serieslxdcamon.exe
C:Program FilesQuickTimeqttask.exe
C:PROGRA~1AVGAVG8avgrsx.exe
C:Program FilesJavajre6injqs.exe
C:PROGRA~1AVGAVG8avgnsx.exe
C:Program FilesCommon FilesRealUpdate_OB
ealsched.exe
C:WINDOWSsystem32svchost.exe
C:Program FilesJavajre6injusched.exe
C:WINDOWSsystem32ctfmon.exe
C:PROGRA~1AVGAVG8avgemc.exe
C:Program FilesLogitechSetPointSetPoint.exe
C:WINDOWSSTK02NSTK02NM.exe
C:Program FilesCommon FilesLogishrdKHAL2KHALMNPR.EXE
C:Program FilesAVGAVG8avgcsrvx.exe
C:WINDOWSsystem32lxdccoms.exe
C:Program FilesTrend MicroHijackThisHijackThis.exe
R1 - HKCUSoftwareMicrosoftInternet ExplorerMain,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCUSoftwareMicrosoftInternet ExplorerMain,Start Page = http://www.yahoo.com/
R1 - HKLMSoftwareMicrosoftInternet ExplorerMain,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLMSoftwareMicrosoftInternet ExplorerMain,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLMSoftwareMicrosoftInternet ExplorerMain,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLMSoftwareMicrosoftInternet ExplorerMain,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKCUSoftwareMicrosoftInternet ExplorerMain,Window Title = Windows Internet Explorer provided by Yahoo!
R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:Program FilesYahoo!CompanionInstallscpn2yt.dll
O2 - BHO: &Yahoo! Toolbar Helper - {02478D38-C3F9-4efb-9B51-7695ECA05670} - C:Program FilesYahoo!CompanionInstallscpn2yt.dll
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:Program FilesCommon FilesAdobeAcrobatActiveXAcroIEHelper.dll
O2 - BHO: RealPlayer Download and Record Plugin for Internet Explorer - {3049C3E9-B461-4BC5-8870-4C09146192CA} - c:program files
eal
ealplayer
pbrowserrecordplugin.dll
O2 - BHO: WormRadar.com IESiteBlocker.NavFilter - {3CA2F312-6F6E-4B53-A66E-4E65E497C8C0} - C:Program FilesAVGAVG8avgssie.dll
O2 - BHO: UberButton Class - {5BAB4B5B-68BC-4B02-94D6-2FC0DE4A7897} - C:Program FilesYahoo!Commonyiesrvc.dll
O2 - BHO: YahooTaggedBM Class - {65D886A2-7CA7-479B-BB95-14D1EFB7946A} - C:Program FilesYahoo!CommonYIeTagBm.dll
O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:Program FilesJavajre6injp2ssv.dll
O2 - BHO: JQSIEStartDetectorImpl - {E7E6F031-17CE-4C07-BC86-EABFE594F69C} - C:Program FilesJavajre6libdeployjqsiejqs_plugin.dll
O2 - BHO: SingleInstance Class - {FDAD4DA1-61A2-4FD8-9C17-86F7AC245081} - C:Program FilesYahoo!CompanionInstallscpn2YTSingleInstance.dll
O3 - Toolbar: (no name) - {1017A80C-6F09-4548-A84D-EDD6AC9525F0} - (no file)
O3 - Toolbar: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:Program FilesYahoo!CompanionInstallscpn2yt.dll
O4 - HKLM..Run: [YSearchProtection] "C:Program FilesYahoo!Search ProtectionSearchProtection.exe"
O4 - HKLM..Run: [SunKistEM] C:Program FilesDigital Media Readershwiconem.exe
O4 - HKLM..Run: [Recguard] C:WINDOWSSMINSTRECGUARD.EXE
O4 - HKLM..Run: [lxdcamon] "C:Program FilesLexmark 1300 Serieslxdcamon.exe"
O4 - HKLM..Run: [Logitech Hardware Abstraction Layer] KHALMNPR.EXE
O4 - HKLM..Run: [Kernel and Hardware Abstraction Layer] KHALMNPR.EXE
O4 - HKLM..Run: [LXDCCATS] rundll32 C:WINDOWSSystem32spoolDRIVERSW32X863LXDCtime.dll,_RunDLLEntry@16
O4 - HKLM..Run: [QuickTime Task] "C:Program FilesQuickTimeqttask.exe" -atboottime
O4 - HKLM..Run: [TkBellExe] "C:Program FilesCommon FilesRealUpdate_OB
ealsched.exe" -osboot
O4 - HKLM..Run: [Adobe ARM] "C:Program FilesCommon FilesAdobeARM1.0AdobeARM.exe"
O4 - HKLM..Run: [Adobe Reader Speed Launcher] "C:Program FilesAdobeReader 8.0ReaderReader_sl.exe"
O4 - HKLM..Run: [SunJavaUpdateSched] "C:Program FilesJavajre6injusched.exe"
O4 - HKCU..Run: [Search Protection] C:Program FilesYahoo!Search ProtectionSearchProtection.exe
O4 - HKCU..Run: [ctfmon.exe] C:WINDOWSsystem32ctfmon.exe
O4 - HKCU..RunOnce: [Shockwave Updater] C:WINDOWSsystem32AdobeSHOCKW~1SWHELP~3.EXE -Update -1103471 -"Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; IEMB3; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; yie8)" -"http://www.shockwave.com/contentPlay...=jigsawpuzzles"
O4 - Global Startup: Logitech SetPoint.lnk = C:Program FilesLogitechSetPointSetPoint.exe
O4 - Global Startup: STK02N 2.3 PNP Monitor.lnk = ?
O9 - Extra button: Yahoo! Services - {5BAB4B5B-68BC-4B02-94D6-2FC0DE4A7897} - C:Program FilesYahoo!Commonyiesrvc.dll
O9 - Extra button: (no name) - {CD67F990-D8E9-11d2-98FE-00C0F0318AFE} - (no file)
O9 - Extra button: (no name) - {e2e2dd38-d088-4134-82b7-f2ba38496583} - C:WINDOWSNetwork Diagnosticxpnetdiag.exe
O9 - Extra 'Tools' menuitem: @xpsp3res.dll,-20001 - {e2e2dd38-d088-4134-82b7-f2ba38496583} - C:WINDOWSNetwork Diagnosticxpnetdiag.exe
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:Program FilesMessengermsmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:Program FilesMessengermsmsgs.exe
O10 - Unknown file in Winsock LSP: c:windowssystem32
wprovau.dll
O15 - Trusted Zone: http://download.windowsupdate.com
O16 - DPF: Garmin Communicator Plug-In - https://my.garmin.com/static/m/cab/2...nAxControl.CAB
O16 - DPF: {0E5F0222-96B9-11D3-8997-00104BD12D94} (PCPitstop Utility) - http://www.pcpitstop.com/pcpitstop/PCPitStop.CAB
O16 - DPF: {18120951-D397-4D47-8476-85CD07C1A39C} - http://scanner.win-x-defender.com/setup/webinst.cab
O16 - DPF: {193C772A-87BE-4B19-A7BB-445B226FE9A1} (ewidoOnlineScan Control) - http://download.ewido.net/ewidoOnlineScan.cab
O16 - DPF: {2BC66F54-93A8-11D3-BEB6-00105AA9B6AE} (Symantec AntiVirus scanner) - http://security.symantec.com/sscv6/S...in/AvSniff.cab
O16 - DPF: {30528230-99f7-4bb4-88d8-fa1d4f56a2ab} (Installation Support) - C:Program FilesYahoo!CommonYinsthelper.dll
O16 - DPF: {31E68DE2-5548-4B23-88F0-C51E6A0F695E} (Microsoft PID Sniffer) - https://support.microsoft.com/OAS/ActiveX/odc.cab
O16 - DPF: {56393399-041A-4650-94C7-13DFCB1F4665} (PSFormX Control) - http://ca.com/us/securityadvisor/pestscan/pestscan.cab
O16 - DPF: {5ED80217-570B-4DA9-BF44-BE107C0EC166} (Windows Live Safety Center Base Module) - http://cdn.scan.onecare.live.com/res...scbase5483.cab
O16 - DPF: {63DF43C2-469A-41F3-B119-17B1ACE8BB50} (Sony SNC-CS3 Image Viewer) - http://61.9.217.44:1025/home/SonySncCs3View.cab
O16 - DPF: {644E432F-49D3-41A1-8DD5-E099162EEEC5} (Symantec RuFSI Utility Class) - http://security.symantec.com/sscv6/S.../bin/cabsa.cab
O16 - DPF: {6E32070A-766D-4EE6-879C-DC1FA91D2FC3} (MUWebControl Class) - http://update.microsoft.com/microsof...?1125242674640
O16 - DPF: {917623D1-D8E5-11D2-BE8B-00104B06BDE3} (CamImage Class) - http://www.hihiltonhead.com/AxisCamControl.ocx
O16 - DPF: {A922B6AB-3B87-11D3-B3C2-0008C7DA6CB9} (InetDownload Class) - https://media.pineconeresearch.com/A...oadcontrol.cab
O16 - DPF: {A93B47FD-9BF6-4DA8-97FC-9270B9D64A6C} (VaPgCtrl Class) - http://www.4xem.com/downloads/cab/WPT/h263ctrl.cab
O16 - DPF: {B38870E4-7ECB-40DA-8C6A-595F0A5519FF} (MsnMessengerSetupDownloadControl Class) - http://messenger.msn.com/download/Ms...Downloader.cab
O16 - DPF: {B8BE5E93-A60C-4D26-A2DC-220313175592} (MSN Games - Installer) - http://cdn2.zone.msn.com/binFramewor...o.cab56649.cab
O18 - Protocol: linkscanner - {F274614C-63F8-47D5-A4D1-FBDDE494F8D1} - C:Program FilesAVGAVG8avgpp.dll
O20 - Winlogon Notify: !SASWinLogon - C:Program FilesSUPERAntiSpywareSASWINLO.dll
O20 - Winlogon Notify: avgrsstarter - C:WINDOWSSYSTEM32avgrsstx.dll
O20 - Winlogon Notify: GoToAssist - C:Program FilesCitrixGoToAssist570G2AWinLogon.dll
O23 - Service: AVG8 E-mail Scanner (avg8emc) - AVG Technologies CZ, s.r.o. - C:PROGRA~1AVGAVG8avgemc.exe
O23 - Service: AVG8 WatchDog (avg8wd) - AVG Technologies CZ, s.r.o. - C:PROGRA~1AVGAVG8avgwdsvc.exe
O23 - Service: GoToAssist - Citrix Online, a division of Citrix Systems, Inc. - C:Program FilesCitrixGoToAssist570g2aservice.exe
O23 - Service: Google Update Service (gupdate1c9fbe4f8b4930e) (gupdate1c9fbe4f8b4930e) - Google Inc. - C:Program FilesGoogleUpdateGoogleUpdate.exe
O23 - Service: Google Software Updater (gusvc) - Google - C:Program FilesGoogleCommonGoogle UpdaterGoogleUpdaterService.exe
O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:Program FilesCommon FilesInstallShieldDriver11Intel 32IDriverT.exe
O23 - Service: Java Quick Starter (JavaQuickStarterService) - Sun Microsystems, Inc. - C:Program FilesJavajre6injqs.exe
O23 - Service: Logitech Bluetooth Service (LBTServ) - Logitech, Inc. - C:Program FilesCommon FilesLogitechBluetoothLBTServ.exe
O23 - Service: lxdc_device - - C:WINDOWSsystem32lxdccoms.exe
O23 - Service: NVIDIA Display Driver Service (NVSvc) - NVIDIA Corporation - C:WINDOWSsystem32
vsvc32.exe
O23 - Service: PrismXL - New Boundary Technologies, Inc. - C:Program FilesCommon FilesNew BoundaryPrismXLPRISMXL.SYS
O23 - Service: Yahoo! Updater (YahooAUService) - Yahoo! Inc. - C:Program FilesYahoo!SoftwareUpdateYahooAUService.exe
--
End of file - 10370 bytes
View 6 Replies
View Related
Jul 12, 2009
When i tryed installing a new dvd rom on my computer, it installs drivers for a cd rom instead.
And when i try to play a dvd r it won't, it will only play cdr's.
View 4 Replies
View Related
Aug 26, 2008
I have a home built pc with an Asus P5Q-E motherboard, E4600 cpu, 4g's ram and a WD 640g hard drive. The HD is brand new as of 1 week ago.
I formatted all partitions to NTFS.
Partitions are C-49g, E-244g and F-303g.
I've separated the software programs from system software. I had not done this before, but it has no bearing on my problem.
OS is XP Pro w/SP3 and all updates and patches that were needed have been installed.
Had a problem initially with installing updates but fixed the installer with a method found on the MS Help and Support site.
Hard drive is thrashing around constantly. The HD light is blinking around 1 per second during idle times.
When at idle Task manager shows 99% cpu idling.
No activity shows up anywhere including I/O read and writes.
I already turned off Indexing Service.
I tweaked according to the suggestiosn at Blackviper's site and also used Harden-it for a bit more security.
Nothing I have done has helped with the thrashing.
I'm a novice and really don't have a clue of how to fix this.
I read of someone else w/the same problem. He unplugged his Optical SATA drive and the thrashing stopped. I tried that and the flashing light slowed down then stopped but the system was slow and unstable. I re-connected the drive and the pc works ok except for the thrashing.
The person who first tried this never posted again.
I Googled this for a while and have found that this is not specific to my hardware. Seems to be an XP problem.
View 6 Replies
View Related
Dec 6, 2008
Running Mozilla Firefox and Internet Explorer on Windows XP SP3.Have annoying pop-up ads that open new browser windows constantly.Tried about 5 different antivirus freeware packages to no avail. (AVG 8, Kaspersky, etc.)
View 3 Replies
View Related
Aug 30, 2005
My wrist is getting sore by this doubling or tripling of mouse-clicks to get rid of the pop-up's that has the audacity to steal focus constantly. Make my day and tell me how I get rid if it.
View 6 Replies
View Related
Jan 13, 2006
Computer was was suffering from a corrupted NTFS.sys file. (see http://forums.techguy.org/windows-nt...ml#post3285980)
and I didn't have the recovery disk from when I got the OS, so I used Elvandril's recovery disk thing to fix it. After I did this, XP started to load, but then it goes to a blue screen that says "***STOP: 0x00000071 (0x0000000, 0x0000000, 0x0000000, 0x0000000)
SESSION_INITIALIZATION _FAILED
If this is the first time you have seen this stop error screen restart your computer. If this screen appears again follow these steps:
check to make sure any new hardware or software is properly installed. if this is a new installation ask your hardware or software manufacturer for any windows XP updates you need.
If problems continue disable or remove any newly installed hardware or software. disable bios memory option such as cacheing or shadowing. if you need to use safe mode to remove or disable components restart your computer and press f8 to select advanced startup."
I'm running XP Pro SP2, and when I tried booting up in Safe Mode, it still came to this screen.I wasn't able to backup my Hard drive,
solve this without having to reformat my Hard Drive?
View 14 Replies
View Related
