Format the partition you are going to use for the install.Restart your computer.Go into the BIOS Change your boot order and Make the CD-ROM your boot drive.Insert the CD and restart the Personal Computer.When prompted, Press Any key to boot from CD-ROM.Make sure that your computer is boot able by CD, otherwise this will not work.
View 9 Repliesfirst i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedToday my computer went slow so i restarted it and from that point it kept doing the same thing: it starts, then the dialog where it asks u if to start normal or safe mode (but keyboard doesnt work) then after the 28sec it tries to load windows, but a blue screen is shown and then restart again. I put the reinstalation CD but when i get to the "To boot from CD press any key" i cant becouse keyboard is not working.
View 7 Replies View RelatedAnyone know how to automatically boot from the hard drive? Has any one seen this before? I have been in the BIOS, set the hdd as the first device to boot from.I have looked through the BIOS but I can't find anything that jumps out as different or pertaining to this Boot Message.I looked at the boot.ini file, nothing there.I am running Win2k Pro.I don't know where else to look to disable this boot interaction..
View 7 Replies View RelatedI've tried several times to install Windows XP now on a new Maxtor drive bought just the other day. When I have the disc in, it loads to the blue install screen without asking me to press a key to boot from cd, I choose to install, partition the drive and format. It copies the files and then restarts, but when it loads again it still doesn't ask for me to press a key (which you aren't supposed to press the second time), and it loads back to the first menu, where I can start all over again.
View 6 Replies View RelatedI'm using a pentium3, micronpc. I'm running on xp pro. press alt+Ctrl+Del for the pc to continue start-up. I've already gone into the BIOS settings and changed the boot sequence around but it's still not conrected the problem.
View 8 Replies View RelatedWhen I restart the computer it POSTs fine (counts the memory, displays "the" table... etc). When It's about to start Windows it starts beeping. Continuous short beeps. The cursor just blinks on the screen and it beeps. When I press F8 to get to the boot menu, nothing happens. No boot menu appears.I did a repair install from my XP install CD - same thing happens, nothing has changed. I tried to restore MBR record through recovery console but again same thing, no change.
View 9 Replies View RelatedMy comp is acting weird so i decided to either repair windows or reinstall windows, but after it says press any key to boot from cd, and i press a key, i get a blank screen or it loads windows.
View 14 Replies View RelatedWhen I try to boot Windows XP it says "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" What do I do?
View 3 Replies View RelatedTrying to start my computer and it gets to the screen where it gives me 2 seconds to press F11 to start recovery. But after 2 seconds or pressing F11 or any key, another line appears saying the same thing "Press F11 to start recovery". Can't get past this point and start Windows. HD is recognized in another computer as well as in BIOS.
View 5 Replies View Relatedi am putting a new hard drive in a laptop ,but the installation only gets so far,it will format etc etc load files then I get an error message "non emulation press any key to boot from cd" this just keeps on rolling and wont go any further,
View 14 Replies View RelatedGetting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies View RelatedMy computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies View RelatedI have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies View RelatedWhat can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies View RelatedSo I'm having a bit of a nightmare trying to get my copy of XP to boot.Every thing was working fine and then I tried to make a back up image of my drive using Norton Ghost 2003. I have a 200Gb Wester Digital SATA drive and an Asus A8n-SLI mobo. I think that there might have been some problem with the nVidia IDE/SATA drivers as ghost crashed half way thorugh the image making process. Now when I try to boot I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
View 4 Replies View RelatedDisk boot insert system disk and press enter comes what do i do?
View 2 Replies View RelatedFor some reason my other computer i dont understand it alot but when it comes to a Disk Boot Failur, enter system disk and press enter i usually just shutdown computer plug out the wait around 5-10mins but for this time it has really driven me up the wall. at the moment now it hasnt worked and im asking for help here are some of the things i did... like i said before jst left it and wait... putting OS disk in and try to repair didnt work... try to reinstall didnt work it said it cant OS system something like that... changing my boot system to have HDD first and than CD-ROM than floppy (yes i do have a floppy drive).. but one thing it had told me Win XP when i first tried to repair it it said you have to quite when it count down on when to reboot it said if you have a floopy disk unplug it out and i did it and still not working.
View 7 Replies View RelatedI have a Dell 9200 Desktop.(Purchased new in 2007)The system is down.Message at bottom of screen reads:-Press F1 to Reboot. Press F2 ...
View 9 Replies View RelatedMy computer had a problem when it would turn on and turn off randomly, or it would start and shut off automatically. I took it to the repair shop and told me it could be power supply. They had the power supply changed and now every time it turns on I get a "Press a Key to Reboot", and even when I press a key it would still go back to that message. They told me the solution would be to reformat the computer, but important files and programs are on there and there is no back up so I can't have it formatted. Anyone has any solution to this? The computer was fine before, it just wouldn't start up sometimes but when it does it runs smoothly
View 12 Replies View RelatedI have not tested this with any version of Windows XP besides XP Pro. It might work in Home Edition or other versions.If you do this, then you will get the "Press Ctrl-Alt-Delete to begin" box when you turn on your computer, before it asks for your username and password. It also asks for you to press Ctrl-Alt-Del before you can unlock your computer if you lock it. This is done by default in Windows 2000 Server or Windows Server 2003.
View 9 Replies View Relatedwhen i turn my computer on it's just a black screen saying "press f1 to reboot or f2 to set up" I press reboot and the message appears again.
View 1 Replies View RelatedWhen I press the backtick key (top left) it doesn't do anything, until I press it again, when it produces two, "``", but I can never get just one. I've got all regional settings set at "English (United Kingdom). The device is listed as standard 102/103 or microsoft natural.
View 6 Replies View RelatedPress Control and Backspace to delete the whole word instead of a single letter.
View 9 Replies View RelatedI have a Dell 4600c desktop.The hard drive is corrupt (ATA), so I installed a new one. (PATA 160GB).I cannot get past the error message to install Windows XP..OS mode enabled. limited memory 256GB, press F1 or 2 F2.
View 7 Replies View RelatedI have a computer that I just put a new hard drive into with fresh install of Win XP home. It's an Intel board and the start up always pauses after the messages that it's detected a keyboard and mouse and
usb. Then it pauses and just says press F1 to continue. Pressing F1 makes it continue to start up normally.
I have reset the Bios values to defaults and tried to change several of them, with not effect at all. If I unplug the keyboard it sometimes skips the F1 pause. The intel website has not proved helpful. They don't have any discussion groups either.
I got problem with his desktop XP SP2 , when he starts the PC it boots normally till it reaches where it shows windows XP logo then the screen gets blank (i.e he can not see the login name for users). What he used to do: is press the sleep button on the wireless keyboard, then after that press the hardware switch on/off button (not the reset button) on the tower of the hard box. After pressing switch on/off button, he gets directly (pay attention to this) to the login screen where he can see the usernames for all users. He has to do this procedure every time he would like to boot the desktop
View 1 Replies View RelatedI was on my friends computer looking for viruses, spyware, adware, etc. It was pretty clean since he had recently reformatted. I randomly tried to open up a text file and it brought up the screen where you select a program to open it with. Well, notepad isn't there. I goto browse and select it in the Windows dir and press ok and it still doesn't show up in the list. Whats going on? He has Windows XP Pro with SP2.
View 1 Replies View RelatedI was getting the message "ntldr is missing-press any key to restart". I was able to fix that through trail and error. After I restarted my computer I got the message "disc error". Would someone be able to help out. I am running Windows XP.
View 3 Replies View RelatedI have had several customers who have had shutdown problems. The error message offers 2 choices: "End Now" and "Cancel." I think this is caused by part of the program being stuck in memory, but I'm not sure memory leak? more RAM, adjust VM or disk cache, ...??
View 6 Replies View RelatedI am trying to reformat my computer... I had some alzheimers issues with it.. it lost some files etc etc. So I figured why not a better time to completely wipe it clean.I have done this before on other computers and its gone so smoothly with the "press space bar" deal as it boots from the XP disc. I reordered all my boot config so the cdrom is first then the hdd then something called an fdd then floppy.BUT when I exit bios and restart the boot it never asks for the space bar press...
View 7 Replies View Related