I am looking forward to 10/18 and getting the Win 8.1 update from the Store to update my Win 8 machine. I wonder if doing the update will modify the partition that is labeled Window Recovery on my HD. I suspect not.
View 4 RepliesAny way to remove or somehow modify start screen new search and power options icons on Windows 8.1 Update 1? how to do this?
View 4 Replies View RelatedJust got a new pc that has W8, came from XP. I have a popcorn hour NMT with an internal HDD that I have networked and was working fine with my old pc. The drive is mapped and is visible in windows explorer and I can even upload files to it with Filezilla. When I try to modify a file through w explorer it shows the drive as read only. Below is what I have tried so far and nothing seems to work.
-Installed "take ownership" program
-Enabled hidden administrator account
-Tried to take ownership through properties/security/advanced
-Change permissions in properties (goes through all of the files and unchecks read only but when I close and open it again read only is checked)
For some reason I can't seem to get a full administrator account to work. I am the only user of the pc and I have an administrator account but it's standard.
After updating my Windows 8.1, I experienced a BSOD and it has yet to go away. I cannot boot into my old Windows 8.1 partition and keep getting the error message: CRITICAL_PROCESS_DIED
I analysed the crash dump created and it revealed that ntdll.sys was the problem. I don't want to lose those files and my hard disk is all cluttered now with the addition of a new partition.
I just found out that some of space in one of my partition is occupied by NO file after I updated my Windows 8 to Windows 8.1 via MS Store. There is no file hidden in the partition but the computer shows me that 3GB of a partition in my second hard drive are being used.
What I did on my computer before I updated Windows 8 were:
1. Recovered my PC to the factory state
2. Formatted all partitions in both hard drives (the primary one has 3 partitions, not including those Windows hidden partitions, and the second one has 4 partitions).
3. Updated my Windows 8
4. Went through the setup screens
Then I found that 3GB of a partition in the second drive is being used, but there is no file or hidden file there. Do you know what behind this usage???
Win 8 Enterprise x64, non local administrator user.
I can not change music's rating or other stuff from details pane. In local administrator user I can. Should I change my account type? Also the music is at external HDD.
I ran into a problem today where I entered in some details incorrectly to a hidden wireless network profile and then discovered that MS have removed the Wireless Network Manager so I couldn't delete or correctly configure that network as it would not get listed in the metro wireless interface.
After digging around on my machine I've discovered the wireless profiles are stored in
C:ProgramDataMicrosoftWlansvcProfilesInterfac es
Where the first sub folders list guides for respective wireless devices on you machine which contains xml files pertaining to the wireless profiles for the respective wireless devices. it seems same to manually delete the files or edit.
How can I modify an Windows 8.1 ISO so it can work with a non-supported CPU? I would like to make it work with a Pentium 4 2.8Ghz HT Northwood CPU. Rest of specs; 2GB RAM, ATI 4650 DDR3 1GB, 250GB HDD. Computer is a SONY VAIO PCV-RS430G. I updated its BIOS to latest which dates back to 2004 but did not add the NX/PAE that is needed for Win 8.1
View 6 Replies View RelatedOn my laptop I have my microsoft account and everything set up and I have just started online schooling but when I go to the campus every few weeks i cant use their internet because i dont have a computer on their domain thing and I want to be able to join their domain but don't want it to affect my current setup.
So if i connect to their domain will it modify my current account or give them access to my current accounts files???
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
View 2 Replies View RelatedI am tired of having to repair Windows updates then get to install one or two then have to go through the whole process again.
Is there a site where updates can be downloaded according to their KB numbers then installed manually?
I have both windows 7 and windows 8 and I would like to have each operating system on a different partition (or even on a separate hard drive if it isn't possible). My windows 7 is 32 bit and I have both 32 and 64 bit of win8. The Windows 8 is a OEM system builder version. Is it possible to have both a 32 bit and a 64 bit on the same drive (partitioned of course) If not, would installing it on a separate hard drive work? My final question is: if I can get win 8 and Win 7 on my computer, could I still use some of the Win 7 software with windows 8 or would I have to download another version? I am using a Fujitsu lifebook T730, corsair ssd as primary drive, and a HHD in my disk drive bay.
View 4 Replies View RelatedI am trying to partition 25 Gigabytes of my hard drive to dual-boot Ubuntu, but when I go to "Shrink Volume" and try to shrink my C: drive, I can only shrink around half a gigabyte. I defragged it and it still won't shrink more than that. It is a 440GB drive and I still have 298GB free.
View 2 Replies View RelatedI just looked at the disk manager, and I see this:
I am not sure what those 19 gb are.. and is there a way to get them back ? If I right click on it only gives me an option to delete..
I'm having a problem connecting my laptop to an external monitor. I've encountered this problem a few times now. My external monitor will just stop working one day, and the only way I've found to fix it is to delete the keys located in the EFI partition.
After the keys are deleted I can reset EFI in the BIOS and the monitor will then be detected by Windows. It's getting to be really annoying having to reset EFI every couple days. So, I decided to see if I could unlock the EFI partition and try to remedy this problem.
So far I managed to set the partition as a basic data partition using SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Next, I assigned it a drive letter. But if I try to explore the contents I get an error saying "I don't have permission".
How to assign the correct permissions??
I recently shrank my had drive and made a data partition. I then did a factory restore and installed windows on the c partition. Everything seemed to go well. I now can not see the D partition. It only shows up in Computer Management. It will not allow me to do anything with it. It is calling it OEM partition. What do I need to do to recover this?
View 8 Replies View RelatedI recently made a partition for the (forget the exact name) but the I guess demo version of Windows 8. I will just upgrade to Windows 8 when it comes out. Is there a way to get rid of that partition, and just have my hard drive back to the way it was?
View 7 Replies View RelatedI have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
View 5 Replies View Relatedi brought an HP Pavilion G6 and it comes with an GUID partition table (GPT), EFI and Secure Boot. However i need an MBR partition table, so i tried disk managerment but the option "convert to mbr" is greyed out and when i run the "diskpart - list disk - select disk 0 - convert mbr" i get an error "cannot convert a partition which has a pagefile on it" (disabling the pagefile didn t worked).
I guess my only other option is to format it, but the notepad comes with an lincesed Windows 8 which i dont wont to loose. So what are my options? I dont ave the CDs, as it s HP packet.
Update:I ve successfully formatted my Notebook. All i had to do is enter legacy mode, disable secure boot and boot from the Windows 7 DVD. So if you ave no intention using Win 8 it won t be a problem to "downgrade" in an UEFI/EFI System.
i have Ultrabook Dell XPS 15 (Touch screen)
with 2 hard drivers (500GB SATA+ 32GB SSD )
now the question, when i re install windows 8.1
how i can partition the 32 SSD hard drive
should i install windows on it ? or just use it a a normal partition ?
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.
What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?
Have noticed that my hard drive has 6 partitions
Acer 914gb Ntfs
350mb healthy
300mb healthy
450mb healthy
15.51mb healthy
400mb healthy
I am following instructions to install ubuntu along side windows 8.1 the instructions say that you should only have upto 4 max partitions how can i delete these partitions down to as when you right click there is no way to delete.
Also which ones are safe to delete ...
I am using a acer laptop 2.4ghz 6gig ram 64bit ...
I wanted to set up dual boot for Windows 8. I created a partition with enough space to load windows 8 from an ISO file.
However, after creating the bew volume, windows 8 displays a message that the partition is dynamically loaded. I have deleted the partition and re-created it with the same result.
I don't remember seeing an option for dynamic creation.
In a previous attempt< I have a partition(Q), which cannot be deleted, don't know if this is a problem.
I'm going to upgrade my whole system at home I'm going to install Windows 8 Pro.
I've got two SATA HDD, sadly I have not SDD , the first one contains two partitions: the first one with the OS and the second one with all the programs/games/utils I've installed in time. The second hard disk contains only datas like movies, pictures, music etc etc.
Just to be more clear, at the moment with Seven I've got C: with the operative system and D: with all software I installed in time with the two folder "Program Files" and "Program Files (x86).
As a fresh Windows 8 installation, need to maintain the double partition of the primary hdd or is it completely useless?