Manually Modify Windows 8 Wireless Network Profile
Aug 20, 2012
I ran into a problem today where I entered in some details incorrectly to a hidden wireless network profile and then discovered that MS have removed the Wireless Network Manager so I couldn't delete or correctly configure that network as it would not get listed in the metro wireless interface.
After digging around on my machine I've discovered the wireless profiles are stored in
C:ProgramDataMicrosoftWlansvcProfilesInterfac es
Where the first sub folders list guides for respective wireless devices on you machine which contains xml files pertaining to the wireless profiles for the respective wireless devices. it seems same to manually delete the files or edit.
On my laptop I have my microsoft account and everything set up and I have just started online schooling but when I go to the campus every few weeks i cant use their internet because i dont have a computer on their domain thing and I want to be able to join their domain but don't want it to affect my current setup.
So if i connect to their domain will it modify my current account or give them access to my current accounts files???
I am trying to change my wireless network profile from public to private, but cannot for the life of me figure out how...
Network Location - Set to Private or Public in Windows 8
^^ Those instructions no longer work on 8.1, and when I go into PC Settings > Network > Tap my network I see no options to enable sharing. I don't have Pro on this particular tablet so I have no access to gpedit.msc nor secpol.msc. What the hell do I have to do to change it? Other than this one ridiculous fault, I think 8.1 is far better than 8 (so far anyway.)
I do a lot of AV system programming, which generally involves having to set my IP address for either my Ethernet port or WiFi card to manual IPs temporarily. I am having an issue on a relatively clean install of Windows 8 Pro that after I change my IP, when I go back into TCP/IP v4 to change it back to DHCP, it is already set to automatic... but if I right click on the connection icon and go to Status, it still has the static address. I tried to set it to another manual address and to hopefully go back in to revert, but that doesn't work.
The ONLY thing that seems to work is removing the NIC from Device Manager and then re-scanning for hardware changes where it will be automatically detected with DHCP enabled by default.
WiFi card is Intel Centrino Ultimate-N 6300 AGN.
Ethernet NIC is a Broadcom NetXtreme 57??.
I've got the latest available drivers, and using generic ones doesn't work. It's also on both NICs so I don't it is a driver issue.
I am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro.
I am having issues with my clients. Every time they logon, the information won't go through the PC client and load up. I get this problem in the image below.
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
Just got a new pc that has W8, came from XP. I have a popcorn hour NMT with an internal HDD that I have networked and was working fine with my old pc. The drive is mapped and is visible in windows explorer and I can even upload files to it with Filezilla. When I try to modify a file through w explorer it shows the drive as read only. Below is what I have tried so far and nothing seems to work.
-Installed "take ownership" program -Enabled hidden administrator account -Tried to take ownership through properties/security/advanced -Change permissions in properties (goes through all of the files and unchecks read only but when I close and open it again read only is checked)
For some reason I can't seem to get a full administrator account to work. I am the only user of the pc and I have an administrator account but it's standard.
Since a few weeks, I have a problem with my laptop running Windows 8.1 (Toshiba Satellite P50-A-12PBE). Sometimes, after bringing Windows back from sleep mode, I seem to have no connection to the internet. Windows says the connection is 'limited', wether I'm connected with a wire or wireless. Resetting the router doesn't solve anything, but rebooting my pc does. Since both the wired and wireless network are always simultaneously affected, I think this hasn't anything to do with drivers (I already have the latest versions by the way). I have made screenshots with ipconfig-results when I'm connected with a wire.
How can I modify an Windows 8.1 ISO so it can work with a non-supported CPU? I would like to make it work with a Pentium 4 2.8Ghz HT Northwood CPU. Rest of specs; 2GB RAM, ATI 4650 DDR3 1GB, 250GB HDD. Computer is a SONY VAIO PCV-RS430G. I updated its BIOS to latest which dates back to 2004 but did not add the NX/PAE that is needed for Win 8.1
Recently I brought A new Laptop which Is A Dell Inspiron 17R Turbo
3D Inspiron 17R Turbo laptop | Dell India
As I had desktop So I had A broadband Wired Network Connection. But Here in my laptop I have a LAN Port but I have A Powerful Intel Centrino Wi-Fi.
is there any way to make my wired connection as a wirless So that My broadband connection would be at home but I could get its network In my laptop Anywhere I go through my Laptop Wi-Fi
Basically what i want it to do is when i connect to WiFi i would like it to turn off the mobile broadband adapter, and once its off the WiFi to re-connect to the mobile. if this is possible i cant find anything about it anywhere ...
I am looking forward to 10/18 and getting the Win 8.1 update from the Store to update my Win 8 machine. I wonder if doing the update will modify the partition that is labeled Window Recovery on my HD. I suspect not.
I have a PC and a tablet, both of which have Windows 8.1 installed, and are regularly updated. I prefer using the wireless connection on my PC, although I do have an active wired connection. Is there a setting somewhere that disables the wired connection automatically when the wireless is active, and also switches back to wired if the wireless disconnects? I have looked into Group Policy Editor at the wireless and wired LAN settings under Network Connections, but don't see any setting to do this automatically.
I'm using a relatively new HP Split X2 (bought new in Dec.), and almost every day I lose internet connection due to wireless adapters being missing. I have only been using the computer to watch Netflix and listen to music. Usually the internet disconnects in the middle of an episode on Netflix, and after being on hold with HP for over an hour tonight
I have a neighbor who has an OPEN network called @HOMED689 . For some reason my Windows 8 machines keep trying to connect to this SSID automatically.
I've never tried to connect to it. Once it's connected however, with limited connectivity, I don't have the ability to right click on it and say "Forget this network" or do anything to it such as when I connect to another wireless it says:
Show Estimated Data Usage Set as Metered Connect Forget this Network View Connection Properties
I just got a computer that comes with Windows 8 and I'm trying to get on the internet with the wireless adapter I was using on the old computer but I keep getting an error message. I am able to install it from the disc but when I go to run the program it says "Can't load ProcNICs.dll" This is the adapter I am using (version 4). The most recent driver the website lists for this adapter is for Vista. Is there a way to get this to work?
In prior versions of Windows before Windows 8, it was very easy to refresh your network list. This would allow you to see ALL of wireless networks in your area that your WiFi card could detect.
My Windows 8 only allows me to see the wireless networks that it wants me to see.
How do I see all Windows 8 networks within range? I have searched but I cannot find anything.
This is a 6 month Old Gateway Laptop, Windows 8 preinstalled. Broadcom Network Adapter.
I have a Buffalo WZR-300GB Router (2.4mHz, with 802.1/ 11g/b/n) all working. There are 4 wired and 3 wireless computers on the network. Wife's Gateway (Windows 8) is the ONLY one with [wireless]dropped connections. No MOVE has been made with Her Laptop or the Router.
This is the troubleshooting I've have done so far.
Uninstalled/reinstalled network adapters.Reset the adapters. Scanned Hardware changes (before/after) in the Device ManagerTurned off Power Management.Disabled the Lan (wired) connection-adapter.Removed (Forget this Connection) 2 other wireless connections from outside the home.Wireless Adapters are set to "Maximum Performance" under (edit power plan).Moved to Laptop (actually the 1st thing I did) to 2 different locations with same results, dropped connection.Under settings the Topology is all Checked, Except 2 I have never seen before. Multi-Layer Protocol, and Kernel 64 something. Anyway, when I insert a check mark next to both. I'm Prompted "Do you really want to disable this connections?" I have done both (checked/unchecked) nothing changes.Under Device Manager: Restore all Hidden Adapters, About Five More adapter showed up I had never seen before. So then I Scanned for Hardware Changes. No effect!
my computer is Dell inspiron 15 win 8 x64 I have problem with my home wifi network; I cant connect ''the settings saved on this computer for the network do not match the requirements of the network'' but when I try other wireless its work
I had a previous thread with my Windows 8.1 OS (8.1 - Wireless Adapter shuts off). I thought it was solved, but after a couple of days, it happened again.
I reformated my System Partition, installed a clean Windows 8 Pro version (Because i didn't had the problem before i upgraded to Win 8.1) and now i have the same issues.
Installed the latest drivers from Intel (Didn't fix it) Installed the drivers that came with my laptop for windows 8 (Didn't fix it) Disabled the Power Management setting to turn of the adapter Changed my DNS (Because i was also getting the 'Default Getaway' problem (Didn't fix it) Did the DISM thing, nothing
I'm starting to think that this is a problem on the Hardware Level? I could try to go back to Windows 7, but i'm afraid i'll have the same problem...
I've once again encountered this problem with my Canon PIXMA MP620 printer/scanner: when using it wirelessly, it can't print. According to 'Devices And Printers', it's offline and therefore most programs I use in Windows 8.1 claim it can't print.
However, using Canon's program 'MP Navigator', it can scan from the printer without any problems. I can scan from the computer to the printer and the other way around. Therefore I'm suspecting that the problems lies with Windows 8.1 and not the printer. The connection is obviously there but Windows doesn't seem to think so.
I can't find a solution in the printer's manual, Windows doesn't give me anything when I try to troubleshoot the printer in question, and Canon's own 'Network IJ Tool' can find the printer but says it's doesn't work without clarifying why.
It's a Sony Vaio touchscreen laptop i5 that came with Windows 8, upgraded to 8.1 about a year ago. Yesterday, the buttons in the available wireless connections stopped working. When you click on an available connection, they no longer provide the drop down that offers connect or disconnect.
Everything is up to date...connecting to LAN works fine.
I am currently having serious issues connecting my windows 8 desktop to wireless internet. It runs fine when hardwired in and I have tried to reinstall drivers I have run programs ensuring me they are all up to date. The computer is a HP Pavilion m8430f. The router is a Verizon router and I believe the company that makes it is actiontec m142wr.
All my windows 7 wireless laptops connect to nps and get authenticated. Windows 8 on the same hardware cannot to wireless. Tried to load the certificate locally but still cannot connect.
