I am fixing a customer's laptop Lenovo N585 and when I push the power button to turn on the machine, I will hear the fan spinning very low but no display. I already hook up a monitor to it but nothing happen. I pressed the FN / F3 buttons and still no display. I even removed the bottom cover to reseat the ram and still no display.
View 14 RepliesSo basically the other day i was trying to improve my ping for gaming by using youtube and changing settings in there registry , after i had made the changes no effect had been taking so i attempted to revert what i had done . Instead i have clicked the back up file of the registry i had exported and added it into my registry thinking it would replace , instead it had been added or duplicated into my registry . As i had been warned , but being unfocused and reckless i had pressed ok . After i attempted to restart my laptop the display would not work . My laptop would turn on and the power button would be on and after the Asus start up message " Persistance , Perfection , Innovation , blah blah " the display would go from black to a lighter shade of black and keep flashing . IT doesn't make it to the welcome screen , i can see my cursor for 5 seconds on one of the shades until it flashes back and forth .
View 2 Replies View RelatedSo just few days ago i was playing with my laptop and it got really slow, I though it might be programs I've had opened or something but I just noticed something
My fan doesn't seem to work when my CPU needs it, i used core-temp and the temperatures are at something like 80C and it feels much hotter than usual, however when i use the battery management to clear out the dust, the fan seems to work
I tried to install tpfancontrol but it gave me a winio.sys error, after some googling, it seems this is the program that allows communication between the hardware and the system.
Im running on windows 8 on a lenovo laptop g500, and it seems my fan works, but can't communicate with my system when it needs it?
I bought a new laptop Lenovo Z510 with 16GB of RAM already and it seems that I am dealing with tons of problems. I got it back to warranty they changed the RAM and the situation seems to have improved significantly.
But even with that I still have faced several BSODs and a lot of problems in the event viewer plus to random crashes for some some apps like firefox.
I attached the files hoping that we get this one sorted.
I just purchased a Lenovo Laptop recently (specifically lenovo Z50-70). From the second day since I switched on the laptop, I began to get an error as follows:
"Your computer ran into an error and needs to restart. We are collecting some info, and then we'll restart for you"
I have done only 2 major changes to the laptop. Firstly, I updated windows 8.1. Secondly, I moved some space from local disk C to D. Why is this error caused.
1. Is the error caused due to windows 8 (or) some driver files?
2. Is it because of some deleted windows files? (Although I have not deleted anything!!)
3. Can a simple re-installation of windows 8.1 solve this issue?
4. Is it because of some hardware issue?
I have a Lenovo laptop running Windows 8.1. I run a number of VB6 programs. One is an estimating system that makes use of .dat files. When I first install the program and the files, everything works fine.
The problem comes when I 'over-write' a .dat file with a newer version, with some basic cost changes (the file updated on a different computer which contains VB6). As I 'paste' from a USB stick it asks if I want to over-write, which I obviously agree to.
However, as I run the program, I still appear to be using data from the previous file! The latest update figures are ignored.
To check this out further, I have even deleted (removed completely) the .dat file from the appropriate directory, but when running the program it still inputs data from the original file.
This leads me to believe there must be another copy of the file open somewhere (hence the phantom!), possibly as a 'last used' reference.
I have been on to the taskbar and ensured I have unchecked the two boxes about retaining files etc.
I have installed w8 pro with media centre on my LENOVO G560 LAPTOP. Its has a inbuilt bluetooth and wifi ... but I cant able to turn on bluetooth...as shown in screen shot.. and sometimes same with wifi also...
Attached Thumbnails :
I have windows 8.1 on a lenovo laptop. A week ago there was an update and I installed it. But after that I first noticed that there was no sound. The volume control has always a red cross and I can't adjust it. Whenever I go to control panel the window freezes. Same goes windows update/recovery/system restore and other pc settings. I think something went wrong with installing the update so i want to go back to a point before that update. But how do i do that when i cant go to control panel/windows update etc.?
View 2 Replies View RelatedI've pressed it once before to restore my laptop to factory settings. It works great. It also restored Windows 8 to a fresh install without having to fudge around with installation DVDs.
I just had a few questions:
What exactly is this button and this process called?
Will this restore trusted/measured boot after one of Lenovo staff turn it off while I was on the phone with them ? (I forgot how they did it. I'm sure I can find out how on Google, but I'm nonetheless curious if it could be done with this button.)
I have this problem where it takes approximately 5 minutes to boot up my Lenovo Y500 (Windows 8, 64-bit) laptop. I had this laptop for almost an year. It was fine in the beginning, took around 20 seconds to boot. However, over time when I restart my computer because of the windows update or defraging, I noticed that it took extremely long to boot, like 5 minutes. It would be stuck on the Lenovo logo with the spinning circle for 5 minutes.
After that there is no problem getting to my desktop. I assumed my HDD (1 terabyte) had a problem. I ran all different programs to diagnose the HDD but it all said it was in "OK" status. So, I did the chkdsk on the CMD and it prompted me that it'll start when I restart my laptop. So I did and now it's stuck on scanning and repairing drive (C: 27% complete for almost 12 hours.
I am not sure how long I have to wait and if it's going to be 27% forever. I have approximately 250 GB / 1 TB on my HDD. I tried doing recovery but it would not work either. If I tried booting through safe mode, it would continue to do the same thing, Scanning and repairing drive (C 27% complete and stuck there. So finally, I tried going for the recovery USB boot drive since I cannot use the recovery built-in the laptop nor have the recovery disc.
However, I was looking in Google how to make a recovery USB for windows 8 (64-bit) but it all looked like you have to be in Windows 8 in order to make a recovery USB drive, but I am stuck on the Lenovo logo screen. Is there an alternative solution to this? Is there a downloadable recovery drive so I can make it boot to the USB?
My Lenovo G580 laptop won't start up. When I turn it on using the power button it goes straight to boot menu/app menu. There are various options there to choose from, but whichever one I choose, it keeps going back to boot menu. I've tried using the novo button, but it still doesn't work. Whatever I choose from the novo button screen, except "BIOS setup", keeps taking me back to the boot menu. My laptop won't start up.
View 9 Replies View RelatedI was having problems getting to the boot menu of my Lenovo G580 laptop earlier.
I figured out how to get the boot menu - But my only options are hard drive, LAN v4 and LAN v6 boot - Nothing about a disc. So I went into the BIOS boot priority menu and set disk to #1 - It still booted to my hard drive!
I'm having trouble keeping my lenovo laptop (running windows 8) connected to the internet. I have been able to connect successfully to multiple wireless networks and access the internet until I tried to connect to the new network.
Initially everything is OK - I can connect to the network and access the internet. However after a short period of time (anywhere from a few seconds to 20 minutes) the network connection will change to limited, without internet access. If I simply disconnect and reconnect to the network the internet will immediately be working again (at least for a few seconds/minutes).
Alternatively, if I run the troubleshooter, I always get the message that the default gateway is not available, which has been fixed by resetting the wi-fi adapter.
I just bought my first Windows 8 laptop, a Lenovo e540. Above the dedicated number pad is a key with a calculator printed on it. Pressing this key of course brings up the 'Calculator' program that comes with Widows. I however strongly dislike said program and have no intention to use it. Instead I aim to have this calculator key open up my preferred calculator, which at this point is SpeQ.
So I created a shortcut for SpeQ and in the shortcut panel of the properties window I set it to the calculator button (which says its "ctrl + alt + F" in the shortcut box). I then found the shortcut for 'calculator' and set the shortcut key to 'None'. BUT... even after double checking that the settings were as intended and restarting the computer, the calculator key still opens up the old program. Additionally, despite "ctrl + Alt + F" appearing in the text box next to shortcut key, typing this opens neither program.
I just got a new Windows 8 laptop, a Lenovo Y510p, and I've been having several wireless issues with it. Pretty early on my computer froze up so I had to force it to shut down. After resolving the issue, I was unable to load any websites, however a flush of the dns cache fixed the problem right up. Fast forward a few hours, and suddenly I can't connect to the router in my dorm room-I just suddenly lost my connection and now I can't reconnect.
My roommate has a router set up for our room connected to an internet jack in the wall. It is configured as WPA2-PSK. I usually connect to this when in the room, but now I can't-windows just says "can't connect to this network". There is wifi throughout the dorm already, which I can connect to just fine, however the signal isn't as strong.
This is a link to my ipconfig : ipconfig - Pastebin.com
I have a Lenovo laptop that came with Windows 8 pre-installed. I decided I want to dual boot with XUbuntu.
I shrank my partition and left space for the linux distro. I installed xubuntu into the free space, and even set the bootloader installation to be in that partition as well.
Then after installation, I only get the GRUB bootloader. How to get Windows 8 back and I finally be able to boot into either OS.
However, I have lost the blue UEFI boot manager that Windows 8 should display.
So I get EasyBCD on Windows, try lots of options to regain an original boot manager. But instead of the typical blue UEFI screen, it created a black screen with my boot options (and the linux option doesn't boot from there).
So to summarise, my boot sequence is like this:
-Switch on laptop
-See GRUB, with default pointing to Windows. I am able to boot to linux from here.
-Click Windows and then see Windows Boot Manager (black) with Windows and Linux
-Click Windows and it boots. Click linux and get an error.
I have secure boot enabled, and I installed xubuntu in secure boot mode.
I have a Lenovo Z710 laptop(see spec's)and want to make a recovery USB and also setup a backup system. This is a new machine and I don't want to make a mess of it.
I have a 32GB USB drive to make the Recovery on.Lenovo refers me to this method to make a Recovery USB :Methodology to create Recovery Media and reload a Lenovo Think system with Microsoft Windows 8 preload
Is this a good way to do this or is there a better way ?
I also need to setup a backup system, what is the best program to use for this, paid or not ?
I have a 1TB HDD in an external enclosure with 3.0 USB cable to use for the backup's.
I bought a new laptop without OS, it's a XMG advanced with i7 4700MQ CPU, an Intel HD grafics 4600 chip and an NVIDIA geforce 765M GTX.
I installed win 8.1 and updated all drivers. The laptop itself works fine. Now I wanted to connect an external Monitor ( HP w2207h) The laptop recognizes that there is an external Monitor and that it is an HP w2207h and tries to extend the desktop to it, but the monitor itself says that there is no input signal via the HDMI input and it goes to sleepmode.
When I connect my old Laptop to it, it is no Problem, the monitor shows the extendes Desktop, so the monitor an all cables are OK. (old Laptop : Win7 core 2 duo CPU geforce 9600M GT )
With the new Laptop I have the same problem, when I try to connect it to my LG TV set via HDMI, the Laptop recognizes the TV and tries to extend the desktop ( I can move the mouse out of the internal display to the TV ) but the TV says there is no input signal.
I have set the Output to 60 Hz and different resolutions and tried to duplicate the display or only use the external one. Nothing worked.
I can't force the Laptop to use the Gforce, he decides which one he wants to use.
A friend bought the same laptop and made the same installation, but when he connects to his external moniotr everything is fine, but I don't know what kind of monitor he has and I have not connected my laptop to his monitor.
I've just bought a Toshiba L855 with Windows 8 factory installed. So, I'm trying to learn two things at same time, Windows 8 and the laptop functionality. One of the details that I don't like is the automatic power on and boot up every time I open the display, regardless... may be useful for other users, but not me.
Although there is an option to disable that Panel-open/Power-on, still does it! The "disabled" status is there, but nothing changed. It keeps starting up.
I haven't installed anything yet to the PC until I'm really sure there is nothing wrong with the hardware, I hope is not a warranty issue.
BTW, I have two administrator users, my wife and I. We tried disabling that power up with each user logged and still won't work.
I've upgraded to windows 8.1 a few days ago through a custom install as I was running windows 8 x86 and wanted to switch to x64. I've also just updated the BIOS.
After the upgrade though, my laptop goes into sleep/standby and locks the screen instead of turning off the display as I have it set. So, if I edit any power plan settings to turn off the display after 2 minutes, it will go to sleep after 2 minutes.
Downloaded this AM to 8.1 from Win 8. Have an old Gateway laptop, can't afford to get new even though I need one. The display is very dark - it was fine with Win 8. Is there some setting I need to change - can't find any way to make it brighter. Like I said, it was fine before & I didn't change any settings myself.
View 1 Replies View RelatedI have a problem of windows 8.1 and my laptop (HP EliteBook 8560w). My display is full HD (1920x1080), 15.6", GPU: nVidia Quadro 2000M. When I installed windows 8.1 (all version, 64 bit) the GPU driver is updated automatically at lastest version (327.31). But some 3rd application ex: Google chrome... is blurry. Then, I chosed the option "Let me choose one scaling option for all my displays" at 125%. All thing is OK.
But whenever I started my windows, my display always flashing one time, about 1-2s. it's very inconvenience. Because of that problem, I downgrade to windows 8.0. But i still want to use windows 8.1 ....
I bought a new desktop last year to run high-end software used for my degree; I installed Windows 8 on it, having got on with it on my laptop. I did notice though, after venturing into the Task Manager, that my CPU usage was at 100%. All the time. Even when idle. In fact, resource monitor says it's working at 108% load! I thought this was rather odd, so investigated further:
It appears that task manager divides the 100% usage proportionally between the processes using the CPU. So for example if Firefox, Word and Notepad were using 5%, 3% and 2% respectively, Task Manager would report 50%, 30% and 20% usage. I was initially concerned that my processor was going to take some serious damage to its life expectancy if it was being constantly loaded - but the performance monitor in Norton Anti-virus shows the CPU load to be much, much lower - where I'd expect it to be.
My system is an 3.4GHz i7, with 16GB RAM running 64-bit Windows 8 Pro. People have suggested a fresh install, but it's difficult tobackup everything up and re-installing VPN servers and software through various security measures, so I'd rather not...
My dell inspiron n5010 running on Windows 8, today all of a sudden started showing some grains on the display.Soon after it happened, it showed me a message which says
"Your PC ran into a problem and needs to restarts. were just collecting some error info, and then well restart for you (100% complete)".
The system restarted by itself and it started running system repair. The system repair screen is also grainy. After the repairing is done, it restarted showing Windows 8 logo(that too with grainy display).But nothing really happens after that and it its stuck. So I decided to switch it off and turn it back ON after sometimes. I did that and the PC booted with no issues with the display perfectly fine. But the same issue is repeating again and again and I will have to shut down the system for some time and then again turn it back ON to make it run normal.
Since I have installed windows 8.1, every time for example if I don't use my laptop for 10 minutes, and because of the battery saving setting plan, my display turns off. Before I installed windows 8.1, I could just move a mouse or press any key and display would turn on, but since the installation I have to restart my laptop (Samsung ultrabook), even if I can hear it's on and working.
View 4 Replies View RelatedI have an Acer Aspire laptop which has recently stopped booting up. It doesn't display anything when powered on. I know it is not a problem with windows because it doesn't even display the Bios boot screen. Why is this? The fans start but I cant hear the hard drive.
View 4 Replies View RelatedSince installing Windows 8 to my laptop, I can no longer display to my Samsung USB hub monitor.
When I try to duplicate or extend, the hub says 'Connecting to PC...' but then nothing happens. Something is working as my mouse and keyboard are plugged into the hub and they work. I just cant get the display. I think all my drivers are up to date.
I have a new Dell Inspiron 15 7000 laptop with an i7-4510U, Intel 4400 Graphics, 1920x1080 screen, and Windows 8.1. I have noticed that the display will brighten and dim when switching between apps. For example, going from a dark desktop background to a white background such as File Explorer, it will take the display about 5 to 10 seconds to brighten to the appropriate level. Going back to the desktop it will dim and sometimes even show a quick flash. I have the display set at 60% brightness and have turned off the adaptive brightens. Also using the latest Intel drivers. Exhibits this behavior on battery or AC. Never seen this on a laptop before.
View 1 Replies View RelatedI have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
I just got a new Lenovo laptop with Windows 8. I need to have Windows 7 because I will be using the laptop for inventory and price control in our hardware store and the programs haven't been used on Windows 8 yet. How do I add Windows 7 as a dual boot? Everything I've read is for adding Windows 8 to a system using Windows 7 or earlier. I read where I can downgrade from 8 to 7, but I got stuck because I couldn't disable the Secure Boot Control as one of the steps in the instructions.
View 1 Replies View RelatedMay I know how can I change the Lenovo apps name? as attached in this mail
View 4 Replies View Related