So just few days ago i was playing with my laptop and it got really slow, I though it might be programs I've had opened or something but I just noticed something
My fan doesn't seem to work when my CPU needs it, i used core-temp and the temperatures are at something like 80C and it feels much hotter than usual, however when i use the battery management to clear out the dust, the fan seems to work
I tried to install tpfancontrol but it gave me a winio.sys error, after some googling, it seems this is the program that allows communication between the hardware and the system.
Im running on windows 8 on a lenovo laptop g500, and it seems my fan works, but can't communicate with my system when it needs it?
I have windows 8.1 on a lenovo laptop. A week ago there was an update and I installed it. But after that I first noticed that there was no sound. The volume control has always a red cross and I can't adjust it. Whenever I go to control panel the window freezes. Same goes windows update/recovery/system restore and other pc settings. I think something went wrong with installing the update so i want to go back to a point before that update. But how do i do that when i cant go to control panel/windows update etc.?
I have a Lenovo Z710 laptop(see spec's)and want to make a recovery USB and also setup a backup system. This is a new machine and I don't want to make a mess of it.
I have a 32GB USB drive to make the Recovery on.Lenovo refers me to this method to make a Recovery USB :Methodology to create Recovery Media and reload a Lenovo Think system with Microsoft Windows 8 preload
Is this a good way to do this or is there a better way ?
I also need to setup a backup system, what is the best program to use for this, paid or not ?
I have a 1TB HDD in an external enclosure with 3.0 USB cable to use for the backup's.
I have a windows 8.1 dell laptop ,for some reason system restore is not creating points manually or automatically, when I try to make a restore point manually the working bar just keeps moving at the sane time though I noticed in the device manger a generic volume shadow copy entry will show up with a yellow mark beside it ,I have tried maybe 10-15 times to uninstall this and try system restore again ,but this keeps repeating itself,
I have also went into safe mode but system restore points can't be made under safe mode, I did the repository thing where I rename that folder to old and reset repository in safe mode ,same result .
I bought a new laptop Lenovo Z510 with 16GB of RAM already and it seems that I am dealing with tons of problems. I got it back to warranty they changed the RAM and the situation seems to have improved significantly.
But even with that I still have faced several BSODs and a lot of problems in the event viewer plus to random crashes for some some apps like firefox.
I attached the files hoping that we get this one sorted.
I am fixing a customer's laptop Lenovo N585 and when I push the power button to turn on the machine, I will hear the fan spinning very low but no display. I already hook up a monitor to it but nothing happen. I pressed the FN / F3 buttons and still no display. I even removed the bottom cover to reseat the ram and still no display.
I just purchased a Lenovo Laptop recently (specifically lenovo Z50-70). From the second day since I switched on the laptop, I began to get an error as follows:
"Your computer ran into an error and needs to restart. We are collecting some info, and then we'll restart for you"
I have done only 2 major changes to the laptop. Firstly, I updated windows 8.1. Secondly, I moved some space from local disk C to D. Why is this error caused.
1. Is the error caused due to windows 8 (or) some driver files? 2. Is it because of some deleted windows files? (Although I have not deleted anything!!) 3. Can a simple re-installation of windows 8.1 solve this issue? 4. Is it because of some hardware issue?
I have a Lenovo laptop running Windows 8.1. I run a number of VB6 programs. One is an estimating system that makes use of .dat files. When I first install the program and the files, everything works fine.
The problem comes when I 'over-write' a .dat file with a newer version, with some basic cost changes (the file updated on a different computer which contains VB6). As I 'paste' from a USB stick it asks if I want to over-write, which I obviously agree to.
However, as I run the program, I still appear to be using data from the previous file! The latest update figures are ignored.
To check this out further, I have even deleted (removed completely) the .dat file from the appropriate directory, but when running the program it still inputs data from the original file.
This leads me to believe there must be another copy of the file open somewhere (hence the phantom!), possibly as a 'last used' reference.
I have been on to the taskbar and ensured I have unchecked the two boxes about retaining files etc.
I have installed w8 pro with media centre on my LENOVO G560 LAPTOP. Its has a inbuilt bluetooth and wifi ... but I cant able to turn on bluetooth...as shown in screen shot.. and sometimes same with wifi also...
I've pressed it once before to restore my laptop to factory settings. It works great. It also restored Windows 8 to a fresh install without having to fudge around with installation DVDs.
I just had a few questions:
What exactly is this button and this process called?
Will this restore trusted/measured boot after one of Lenovo staff turn it off while I was on the phone with them ? (I forgot how they did it. I'm sure I can find out how on Google, but I'm nonetheless curious if it could be done with this button.)
I have this problem where it takes approximately 5 minutes to boot up my Lenovo Y500 (Windows 8, 64-bit) laptop. I had this laptop for almost an year. It was fine in the beginning, took around 20 seconds to boot. However, over time when I restart my computer because of the windows update or defraging, I noticed that it took extremely long to boot, like 5 minutes. It would be stuck on the Lenovo logo with the spinning circle for 5 minutes.
After that there is no problem getting to my desktop. I assumed my HDD (1 terabyte) had a problem. I ran all different programs to diagnose the HDD but it all said it was in "OK" status. So, I did the chkdsk on the CMD and it prompted me that it'll start when I restart my laptop. So I did and now it's stuck on scanning and repairing drive (C: 27% complete for almost 12 hours.
I am not sure how long I have to wait and if it's going to be 27% forever. I have approximately 250 GB / 1 TB on my HDD. I tried doing recovery but it would not work either. If I tried booting through safe mode, it would continue to do the same thing, Scanning and repairing drive (C 27% complete and stuck there. So finally, I tried going for the recovery USB boot drive since I cannot use the recovery built-in the laptop nor have the recovery disc.
However, I was looking in Google how to make a recovery USB for windows 8 (64-bit) but it all looked like you have to be in Windows 8 in order to make a recovery USB drive, but I am stuck on the Lenovo logo screen. Is there an alternative solution to this? Is there a downloadable recovery drive so I can make it boot to the USB?
My Lenovo G580 laptop won't start up. When I turn it on using the power button it goes straight to boot menu/app menu. There are various options there to choose from, but whichever one I choose, it keeps going back to boot menu. I've tried using the novo button, but it still doesn't work. Whatever I choose from the novo button screen, except "BIOS setup", keeps taking me back to the boot menu. My laptop won't start up.
I was having problems getting to the boot menu of my Lenovo G580 laptop earlier.
I figured out how to get the boot menu - But my only options are hard drive, LAN v4 and LAN v6 boot - Nothing about a disc. So I went into the BIOS boot priority menu and set disk to #1 - It still booted to my hard drive!
I'm having trouble keeping my lenovo laptop (running windows 8) connected to the internet. I have been able to connect successfully to multiple wireless networks and access the internet until I tried to connect to the new network.
Initially everything is OK - I can connect to the network and access the internet. However after a short period of time (anywhere from a few seconds to 20 minutes) the network connection will change to limited, without internet access. If I simply disconnect and reconnect to the network the internet will immediately be working again (at least for a few seconds/minutes).
Alternatively, if I run the troubleshooter, I always get the message that the default gateway is not available, which has been fixed by resetting the wi-fi adapter.
I just bought my first Windows 8 laptop, a Lenovo e540. Above the dedicated number pad is a key with a calculator printed on it. Pressing this key of course brings up the 'Calculator' program that comes with Widows. I however strongly dislike said program and have no intention to use it. Instead I aim to have this calculator key open up my preferred calculator, which at this point is SpeQ.
So I created a shortcut for SpeQ and in the shortcut panel of the properties window I set it to the calculator button (which says its "ctrl + alt + F" in the shortcut box). I then found the shortcut for 'calculator' and set the shortcut key to 'None'. BUT... even after double checking that the settings were as intended and restarting the computer, the calculator key still opens up the old program. Additionally, despite "ctrl + Alt + F" appearing in the text box next to shortcut key, typing this opens neither program.
I just got a new Windows 8 laptop, a Lenovo Y510p, and I've been having several wireless issues with it. Pretty early on my computer froze up so I had to force it to shut down. After resolving the issue, I was unable to load any websites, however a flush of the dns cache fixed the problem right up. Fast forward a few hours, and suddenly I can't connect to the router in my dorm room-I just suddenly lost my connection and now I can't reconnect.
My roommate has a router set up for our room connected to an internet jack in the wall. It is configured as WPA2-PSK. I usually connect to this when in the room, but now I can't-windows just says "can't connect to this network". There is wifi throughout the dorm already, which I can connect to just fine, however the signal isn't as strong.
This is a link to my ipconfig : ipconfig - Pastebin.com
I have a Lenovo laptop that came with Windows 8 pre-installed. I decided I want to dual boot with XUbuntu.
I shrank my partition and left space for the linux distro. I installed xubuntu into the free space, and even set the bootloader installation to be in that partition as well.
Then after installation, I only get the GRUB bootloader. How to get Windows 8 back and I finally be able to boot into either OS.
However, I have lost the blue UEFI boot manager that Windows 8 should display.
So I get EasyBCD on Windows, try lots of options to regain an original boot manager. But instead of the typical blue UEFI screen, it created a black screen with my boot options (and the linux option doesn't boot from there).
So to summarise, my boot sequence is like this: -Switch on laptop -See GRUB, with default pointing to Windows. I am able to boot to linux from here. -Click Windows and then see Windows Boot Manager (black) with Windows and Linux -Click Windows and it boots. Click linux and get an error.
I have secure boot enabled, and I installed xubuntu in secure boot mode.
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
I just got a new Lenovo laptop with Windows 8. I need to have Windows 7 because I will be using the laptop for inventory and price control in our hardware store and the programs haven't been used on Windows 8 yet. How do I add Windows 7 as a dual boot? Everything I've read is for adding Windows 8 to a system using Windows 7 or earlier. I read where I can downgrade from 8 to 7, but I got stuck because I couldn't disable the Secure Boot Control as one of the steps in the instructions.
so after I did windows updates after a long time (it's for a good reason that I am not updating) the notebook failed to start correctly. After the windows loading screen, only different tones of black were flashing - probably bad graphics driver. Anyway, I managed to do a system restore. Although it said it wasn't successful, it works But now some programs won't start. From Adobe, AfterEffects starts without problems, but Photoshop and Illustrator has an error: [URL]
When I try to uninstall Office completely, the set-up window doesn't even come up. And what's worse... when I run a new installation from a disk, there's an error too. [URL]
I've never come across something like this.. I don't know what to do.
Edit: So I managed to uninstall Office through a 3rd party software.. but I still have trouble installing it back (a different error now). I run as administrator and have full user rights on the folder..
I am unable to access system properties of my windows 8 pro. When i right click on My Computer icon and click Properties, System Properties window open for a second and immediately closes. I have the same problem even if i try to open System Properties from Control Panel.
I found out that, It's the windows update KB2871389..i uninstalled it from Windows update and "system properties" now ok.
My desk top was working when I turned it off yesterday, i turned it back on this morning to discover it got stuck on the start menu screen, so I turned it off and turned it back on (it apparently was having this issue a few days ago when a friend was using it, he reset it several times). When it turned back on and I logged in, the screen kept flickering between the desk top and what i assume is the start menu. It won't even load the desktop/start bar icons.
I've tried booting in safe mode and the same problem but it gave me an error message,I/O unexpected error 0xc00000e9. so i decided to boot from a recovery USB, and now its telling me that the media isn't valid. I don't want to wipe it as it has valuable documents on it.
tldr, I broke 8.1 and my recovery isn't working.
I have another windows 8.1 machine that I used to create the recovery USB.
This button is not working. The window doesnt hang. There is no error message. It just doesnt say anything. I am trying to install Visual Studio 2013. It needs to create a system restore point before starting installation. Needless to say, it fails too. I am on Windows 8.1. I ran sfc /scannow with no results.
My main problem is that I accidentally uninstalled MS Office earlier today from my Dell Inspiron which I bought in 2012; the second problem is that I can't do a system restore to get it back to the point before the accidental un-installation. I'm on Windows 8. It keeps telling me there's something wrong but when I run a check on the C: drive, everything comes up fine. I opened the computer in safe mode, do a system restore and same thing happens - error.
I don't know if I can locate the original MS Office card that I received when I got the computer, to re-install the program, which is why I'm in a bit of a panic right now.
I just bought a sony laptop with windows 8. The side panel power options(shutdown and restart) and alt+f4 are not working to shutdown the laptop. Only holding the hardware power button for 4 seconds is working to shutdown the laptop.
A month back I accidentally deleted the wow6432 node from my registry under system_user. I believe this is the root of all my problems. Once I did that, my toshiba c885 D 64 bit would not boot. I forced the computer to shut down and pressed f12 to get to the system recovery options. I then restored to a point before my blunder. Well, my laptop worked for a while and then magically the screen goes black and will not reboot. I did sestem restore a few more times since I could get a little bit of work done in between restoring and the screen turning black again. After I was fed up with having to run system restore every other day, I decided to run system refresh to keep my files but reset everything else. After restoring I am getting the same problem and find myself again running system restore every other day just to keep working.
My questions are if I completely reinstall windows 8 and start from scratch, will this definitely solve the problem? I thought system refresh would have worked, so I'm not sure. Also, are there any other available options for me to fix my computer without starting from scratch?
Today i turned on my G73JH today and my keyboard is not working, I have windows 8.1 and had to use the on screen keyboard to type anything in. The keyboard works fine when i press F2 to go into the bios and and can navigate around the bios no problem.
Recently I updated my laptop and when it was finished updating the keyboard no longer worked. Before the update it worked fine and I had no problems. I restarted it several times and restored it but still nothing. Now I am stuck using the on screen keyboard which is difficult. I also went to try and fix it using device manager but it wasn't listed.
I have an Asus laptop with Windows 8. I got it last August and until last week I haven't had any problems with it. Last week, my sound stopped working. It shows that the sound is up all the way on speakers and system sounds, but I am only able to get sound when I plug my headphones into the headphone jack.
I have Windows 8, 64-bit, IE 10 (uses 32-bit) and am using the free version of AVG anti-virus. I noticed that IE will crash (IE has stopped working and needs to restart) on a daily basis. I am using an HP laptop G62-340US. I have IE set to update automatically.
