Hardware Drivers :: Kernel-PnP Event 420 - PCI Device Was Deleted
Nov 2, 2013
I recently discovered this event error dated 10/18/2013 which is about the time that I upgraded the BIOS and attempted to enable Secure Boot. Enabling Secure Boot worked as far as Windows 8.1 is concerned - eliminated watermark and Secure Boot event errors but the system boot process displayed NO VIDEO during POST and there were 6 beeps and power light flashed 6 times. HP Boot error codes indicates a problem with the video card (AMD Radeon HD 7500). If Secure Boot is turned off, everything works fine. I would like to understand why this event error was reported and how to correct the issue. Is the video hardware not compatible with UEFI and Secure Boot? Did keys get lost that allows Secure Boot to validate this hardware get removed? Although I am happy without Secure Boot, I would like the decision to use Secure Boot to be mine and not because something isn't working correctly.
View 5 Replies
ADVERTISEMENT
Jul 13, 2013
I got my new ASUS laptop on Mother's Day this year, and the first event happened a week later. I've had this same event happen 6 times since then as shown by the attached image.
I'm comfortable with computers but am not an IT person so I'm not comfortable performing tasks within my system unless I know what the heck I'm doing or why.
W7 forum said overclocking (it's not), heat (this last time it had been in sleep mode while I was out and within moments of waking it up it crashed), sudden loss of power (it's plugged in AND has 100% battery left) and so on. In other words, it doesn't appear to be related to any of those things. It just randomly happens.
1) why this keeps happening and
2) how to fix it?
I've been very disappointed in my new laptop since getting it; I've NEVER had such issues with a new computer before..and I thoroughly dislike Windows 8 and I doubt I'm alone in that view.
View 5 Replies
View Related
May 9, 2014
"The maximum file size for session "Circular Kernel Context Logger" has been reached. As a result, events might be lost (not logged) to file "C:Windowssystem32WDILogFilesBootCKCL.etl". The maximum files size is currently set to 104857600 bytes."
"Session "Circular Kernel Context Logger" stopped due to the following error: 0xC0000188"
These two messages went away for awhile and now the're are back. How to make them go away? I don't think I did anything with tracing to make this happen?! I know I should make a pledge to never look at the Event Log but...every once in awhile I uncover something that can be fixed. I have Googled the messages but don't seem to be able to find any real solution. I tried deleting the .etl file but it fills up on the next boot.
View 1 Replies
View Related
May 26, 2014
Recently I noticed a game that I had been playing had started to stutter and slowdown more than usual, the performance issues were to be expected as the games engine is notorious for being poorly optimized, however these occurrences were fairly rare in comparison to the issues i'm experiencing now.
It seems for the last two days the performance of said game had been dismal, where i'd get a mostly consistent frame-rate before, I now only have a stutter riddled mess.
Looking through the Event Log I noticed a entry shown as; Kernel-Processor-Power Event ID 37, the text below it shows this; 'The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 7 seconds since the last report' the entry had been generated at '7:56pm' of today, which I found odd, as I believe that's when I started my game.
This had not been the only instance it seems, there were some entries from a few weeks back that show the same thing, however they were few and far in between. It seem I have 3 entries, all from today (12:00am, 3:56pm, 7:56pm) all warnings.
View 8 Replies
View Related
Mar 15, 2013
I have had three of these shutdowns randomly occur over the last 2 days. I have no warning on when they will occur.
The computer is only 5 weeks old, so i wouldn't except an overheat issue personally. I can think of no new software i have installed since this has started. So far, it has always happened while playing a game (Diablo 3) but that is likely just coincidental, as that is what i do most on this computer.
MSI GT70 0ND computer
GTX 675MX vid
16GB DDR3
i7 3630QM
View 9 Replies
View Related
Aug 14, 2014
Today, I started up my PC and after browsing on it for an hour I noticed a LiveKernelEvent hardware error in the Performance and Reliability graph. Looking at the time of the error, it appears that it occurred seconds after booting up my PC. The weird thing is that the PC didn't act strange or freeze up. Also, googling this error shows that it's mainly associated with BSOD's while my PC didn't give any.
I couldn't find any errors about it in the logs but there is only an information log about it (Dutch):
Foutbucket , type 0
Naam van gebeurtenis: LiveKernelEvent (name of event)
Antwoord: Niet beschikbaar
Id van CAB-bestand: 0
[Code] ....
Note that at Parameter 1 a code named "ab" is given which I couldn't find at all on the internet (usually P1 codes are numbers). Also, I could only find 2 files that were given by the error log (see attachment). There are no minidumps in C:/windows while it is enabled in the options to register any.
What the cause of this error by looking the files. I just recently formatted my PC and installed all latest updates.
Specs:
Windows 8.1 Pro 64 bit with Media Centre
i5-3570K (stock)
GTX 660Ti
8GB RAM
View 5 Replies
View Related
Sep 15, 2014
I bought my laptop about 3 months ago, i got BSOD relating event 41 task 63 kernel power many times and got twice BSOD today.
View 1 Replies
View Related
Feb 8, 2014
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
View 9 Replies
View Related
Apr 17, 2014
when look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
View 9 Replies
View Related
Sep 15, 2014
keep getting it logged as an error. I have gone into Adjust Date and TimeInternet Timeand it is set to automatically synchronize with time.windows.com and on a scheduled basis. When I try to update or change the setting I get an error message that an error occurred while windows was synchronizing. I have tried to do a system file check but get the error message that Windows Resource Protection could not perform the requested service or start the Repair Service. I have checked that Windows Modules Installer is set to manual and so I don't know how else I can repair this error 131.
View 6 Replies
View Related
Jan 17, 2014
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
View 2 Replies
View Related
Jul 22, 2014
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
View 7 Replies
View Related
Sep 15, 2014
I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
View 9 Replies
View Related
May 14, 2013
Sometimes this message window appear and disappear as attached.
My motherboard is p6x58d premium and I installed every possible drivers. However this window is still coming.
View 9 Replies
View Related
Jun 10, 2014
I recently bought a cheap USB Hub off eBay. I plugged it in and connected my devices and it always works.
However, about 75% of the time when Win 8 boots, I get about a dozen "USB connect/disconnect" sounds and a window that says "USB Device not recognized". (sometimes 3 or 4 of these windows)
I've searched for this issue but every post that I find provides a recommendation for a USB device that is not working. None of these suggestions applies because after all the boot noise, the hub and it's devices work. It just seems like Win 8 is having trouble recognizing the Hub but keeps trying and eventually succeeds.
The Hub is plugged into a USB 2 port with a scroll wheel mouse and a Dymo LabelWriter 400 connected to the hub.
Win 8.1 Pro X64
Asus CM3870
Intel Core i7-3770
16GB RAM
View 7 Replies
View Related
Sep 9, 2013
No USB device seems to be getting detected on my machine when I plug in a flash drive or an external hdd I get the distinctive sound from my speakers that an USB device is plugged in but nothing is showing up in "My Computer". I went through the event logs and found that Windows is failing to load the USB device (check image in attachment logs.jpeg). Recently I installed iTunes, so I though it might be causing this problem but I uninstalled it even then the problem persists. I don't want to format my machine just because of this small problem. Is this a driver conflict ? How do I find out why windows is all of a sudden failing to load the USB devices ? I have uploaded a copy of the saved logs detailing this failure(logs.zip).
View 6 Replies
View Related
May 13, 2014
I have a Seagate GoFlex 1 Tb USB 3.0 drive. All worked good until a week or two ago. Now the drive will not be recognized when plugged into a USB 3.0 port, the error given is "Unknown USB Device (Device Failed Enumeration).
If I plug the GoFlex drive into a a USB 2.0 port, it works. I can plug USB 2.0 devices into the USB 3.0 port and they work. I just can't plug my USB 3.0 drive into a USB 3.0 port and get it to work.
I have tried uninstalling the Unknown USB Device in Device Manager. I've also uninstalled all other instances of it failing to be recognized.
My motherboard has a VIA VL805 USB controller. I've used the drivers on Gigabyte's site and I've used VIA's drivers, no difference. I have the latest BIOS for my motherboard.
The drive does not show up in Disk Management when plugged into a USB 3.0 port. This shouldn't be a surprise since the device is unknown in the Device Manager.
I thought the problem might be with the USB 3.0 cable or the GoFlex drive's USB interface. So I bought a new USB 3.0 docking station and...same problem. The new docking station also fails enumeration. Basically what it boils down to is a USB 3.0 storage device will not be recognized in a USB 3.0 port. But they work when plugged into a USB 2.0 port.
View 7 Replies
View Related
Jan 28, 2014
I have a strange problem: connecting a Canon Powershot G10 digital camera via USB 2.0 to my Win 8.1 laptop presents no problem (info pops up).
But: Using the same cable connected to my desktop PC, there is no reaction whatsoever. No device manager listing, no error message. The USB ports are all working perfectly with other devices (sticks, external hard drive, wireless mouse & keyboard). Moreover, until some weeks ago, the Canon camera was recognized normally.
Short of re-installing the whole USB controller
View 7 Replies
View Related
Sep 15, 2014
When I connect my DualShock 3 controller to my Windows 8.1 laptop it does not charge. I hear a beep, as in something was connected to the PC, then it seems to charge for a couple of seconds (lights flash on the controller) and then it stops. I am able to charge my phone and tablet so, it's just the DS3. It works fine on my Windows 7 computer, so it's not the controller.
View 5 Replies
View Related
May 11, 2014
Bluetooth device is not working
View 3 Replies
View Related
Sep 13, 2013
I want to change OWN Bluetooth device name. I am using windows 8 which comes with my new laptop Dell Inspiron 15z. The company has set my default bluetooth name as "User". However I want it to be changed but how.
I have tried going to Device manager, Devices and printers etc.
View 1 Replies
View Related
Apr 5, 2013
i Am trying to build my first PC with a Asus P8Z68M motherboard I have managed to get it all going but when I start it up its says - Using PCIE Gen 2 - cant find any device. What does this mean? Also, why does the PC beep at me whilst booting up?
View 9 Replies
View Related
Jun 15, 2014
So i purchased a Bluetooth portable speaker from a china it was very cheap and works great the website i got from is *REMOVED* and the model is the bv200 the only issue is that it has some annoying greetings and they are in chinese.
I want to know how can I access this device and delete or replace this greeting, it has a micro usb connection but when i plug it in to my computer it dosent show up in the device list.
View 1 Replies
View Related
Sep 15, 2014
A couple days ago, somehow, I turned on 'scanning your device' and now I get a black screen every time I plug my phone into the USB port to charge it. how to disable this 'feature'. It's really annoying because the connection is a bit worn, and it keeps connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...
I don't want anything to happen when I plug the phone into the USB port.
View 3 Replies
View Related
Sep 15, 2014
I'm running Windows 8.1 on a SDD with a second HDD along side it. Inside the Device Manager I disabled my second HDD and rebooted my system.
Windows started as normal, but a few key windows programs have stopped working:
- Task Manager
- Device Manager (basically all control panel functions)
- Powershell (Command Prompt Works, but can't be opened with administrative rights)
The main problem is that I now can't enable my second HDD. Why the HDD is needed for these programs and how I can re-enable my HDD?
View 2 Replies
View Related
Mar 27, 2014
Recently my "PS to PC Converter" USB device, as shown in image was not recognized by my laptop. It was working fine as of yesterday, where I was playing FIFA with my friend. Then today when I plug it in, it says USB device not recognized even though I can still on the analog but the controller is not detected by the game. Other games that I use to play with controllers are also not detecting the device. I kept reinstalling the driver but still the same message. Restarting computer, turning it off for a few minutes did not solve my problem too. I'm pretty sure my USB ports are fine as my mouse, keyboard and hard drives are working in all of the USB ports.
EDIT: I check the Device Manager and found a yellow exclamation mark on Other Devices named "Unknown device", I check the properties and says Code 43 on the status. I Enable/Disable it, still the same message.
View 9 Replies
View Related
May 30, 2014
I made a bit of an error, I bought a new joystick to play MS flight Sim X and installed it etc .
I went to uninstall the old driver before installing the new one, and made the error. I really don't know why I did it but I went into view devices, right clicked on the icon for the Joystick and removed it
Is there any way to get it back, I have tried to reinstall the driver but it still does not show on the devices panel and i cannot use it ..
View 2 Replies
View Related
Dec 30, 2013
I got a speed camera detector thing for Xmas. I've downloaded the software for the device and when I plug the device in, the software doesn't detect it. The manufacturer sent me an email with a link to download and install the driver. The driver installed, but it still doesn't work. When I looked at the driver status in device manager, it says...
This device cannot start. (Code 10)
{Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
I'm on a windows 8 HP Pavillion 15.
View 1 Replies
View Related
Jul 28, 2014
I use a Sandisk Cruzer Extreme USB 3.0 32gb flash drive. When I plug the flash drive in, autoplay does not come up however the flash drive shows up on My Computer, but not Device Manager. It does not show up on the tray (the "Safely Remove Hardware" icon), but other USB flash drives do. The drive is fully working and I can transfer files to and from the drive, I just cannot autoplay nor eject the drive safely.
I've done the obvious such as ensuring autoplay is enabled, formatting the drive, trying different ports, and now I'm not sure what the problem can be.
I've observed that it's only the first USB port on the front panel that has this problem, but all other USB drives autoplay fine on this port. (I think only usb 2.0 - 3.0 devices do not autplay)
View 2 Replies
View Related
Jul 11, 2014
So, it used to be okay on Windows 7, but now the iPhone icon is not showing up in Windows Explorer or in "Devices and Printers".
[URL] ..... Picture of my computer with no iPhone image.
[URL] ..... Devices and Printers (See the Kodak icon? That's how I want my iPhone 4S' icon to be)
OS is Windows 8.1 Pro with all the latest updates.
View 1 Replies
View Related
May 13, 2014
I have got a problem with bluetooth device. I tried removing my bluetooth device but it failed to remove. It is displayed as "removing device" on the screen as shown in the picture. Now I cannot add the device again. I don't find the device when I search by clicking on "add a device" as shown in the picture. When I try to add from my mobile device it fails to add by showing a message as shown in the next picture.
View 4 Replies
View Related
