Maintenance :: How To Rectify Event ID 131 In Event Viewer
Sep 15, 2014
keep getting it logged as an error. I have gone into Adjust Date and TimeInternet Timeand it is set to automatically synchronize with time.windows.com and on a scheduled basis. When I try to update or change the setting I get an error message that an error occurred while windows was synchronizing. I have tried to do a system file check but get the error message that Windows Resource Protection could not perform the requested service or start the Repair Service. I have checked that Windows Modules Installer is set to manual and so I don't know how else I can repair this error 131.
How do you clear event viewer? Do windows, do it for you? I have recurring 910 and SENT something to do with taskhostex.exe under performance and slower than usual computer. The only thing I have done is install IObit driver program after MS win update screwed up AMD 7420G graphics driver and caused a crash. Should I uninstall IObit, and see if that fixes it? The drivers installed by IObit will still be there to load? IObit fixed the crash
I don't know what happened but I can no longer open Event Viewer. When I click on the icon to open it, the computer appears to work for a split second but then nothing happens. No window opens or anything.
I started up my computer and Windows explorer randomly froze up and hung. I didnt do anything to provoke it. I just sat here waiting for my computer to boot up.Then when I thought it was finished I opened firefox. Then Windows explorer just freezes completely. I tried doing windows key + r. It opened the run window but it froze. Then I tried moving my mouse on the right to open up the charm bar, ( I think it's called that) to hit settings and then restart. When I clicked settings the whole bar just closed out and would close out every time.
I right clicked on the task bar to try and open task manager. When I clicked on task manager it wouldn't ever open. So I couldn't even shut down properly. I just pushed the power button. Then I turned it on again and the same exact thing happened.So I shut it off again.
Then I turned it back on and went to msconfig before it froze up and I set it to boot into safe mode.Then I got into safe mode and ran a malware bytes scan and an avast scan. Nothing came up on either so I just went back to normal boot. The problem stopped now but I want to know what caused that whole thing to happen because it hasn't happened to me before.So I want to look at event viewer to see if that'll explain it. Where would I find that at in event viewer?
In Event Viewer lots of Errors & Warnings showing.these are in Windows 7..plz tell me is there something i need to worry about ? i ran event viewer cleaner 4-5 times that is Win7 Viewer in windows seven forums.but after some time event viewer again fill with errors & warnings.My Event Viewer log >>
While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.
Since installing Windows 8 Professional 64bit I have been experiencing lots of differnt erros / warnings in event viewer. I have attached an admin log from event viewer which shows the majority of the erros. I currently have all the latest drivers and Windows updates installed. I have contacted Gigabyte for a newer BIOS and they provided me with the latest BETA Bios that they have but this still dates back to 2011.
I have also installed the latest firmware available for my Corsair 120GB SSD. How I can go about resolving these errors.
Clean install, right from the beginning I see on a daily basis errors stating something like the zune music and video apps cannot be updated, it won't update from store either, I'm just guessing where this isn't released to the public yet.
Whether or not these batch files that I use to clear the Event Viewer logs and to activate the extended disk cleanup prompt of windows 7 are compatible with Windows 8.1.
-Event Viewer log clean up batch file
@echo offFOR /F "tokens=1,2*" %%V IN ('bcdedit') DO SET adminTest=%%VIF (%adminTest%)==(Access) goto noAdminfor /F "tokens=*" %%G in ('wevtutil.exe el') DO (call :do_clear "%%G")echo.echo goto theEnd:do_clearecho clearing %1wevtutil.exe cl %1goto :eof:noAdminexit
It has been a long, long time since I have wanted to clear the event log and that was under Windows 7. I would like to clear the log under Windows 8 but can find no way to do it. It seems like I remember using 'Clear Log' under Actions but that doesn't seem to be there in Windows 8.
This is in my event log like 10932098434 times. The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{C2F03A33-21F5-47FA-B4BB-156362A2F239} and APPID {316CDED5-E4AE-4B15-9113-7055D84DCC97} to the user CorsairAdam SID (S-1-5-21-728937790-313184532-559953268-1001) from address LocalHost (Using LRPC) running in the application container Microsoft.BingWeather_3.0.1.174_x64__8wekyb3d8bbwe SID (S-1-15-2-2040986369-264322980-3882385089-1970153872-3662121739-3363227934-2464603330).
This security permission can be modified using the Component Services administrative tool.
i am having a lot if event viewers logs with errors and my laptop running very slow; how to remove all those errors and how to clear event viewers log.
I got my new ASUS laptop on Mother's Day this year, and the first event happened a week later. I've had this same event happen 6 times since then as shown by the attached image.
I'm comfortable with computers but am not an IT person so I'm not comfortable performing tasks within my system unless I know what the heck I'm doing or why.
W7 forum said overclocking (it's not), heat (this last time it had been in sleep mode while I was out and within moments of waking it up it crashed), sudden loss of power (it's plugged in AND has 100% battery left) and so on. In other words, it doesn't appear to be related to any of those things. It just randomly happens.
1) why this keeps happening and
2) how to fix it?
I've been very disappointed in my new laptop since getting it; I've NEVER had such issues with a new computer before..and I thoroughly dislike Windows 8 and I doubt I'm alone in that view.
My 12 month old Win 8 64 bit self-build pc has been very stable and as yet, no BSODs.
I want to update /upgrade to Win 8.1 (I have also acquired the ISO) and have managed to execute a File History to my Samsung USB3 1TB ext HDD as a safeguard in preparation. I would prefer to update via the Store to avoid having to reinstall all my programmes
However the File History event log is indicating yellow warning signs and Code 204 errors. Detail states: "Unusual condition was encountered during finalisation of back up cycle for configuration". I am concerned therefore that this might prevent me properly doing a File History recovery should I need to. Researching elsewhere indicates that 204 errors result from corrupted system files.
I have checked the Ext HDD which has the File History folder (12.5 GB) and all my files seem to have been copied OK.
Has the "Event 513 error" issue been solved in the latest version of Macrium Reflect (Free)? This version: 5.2.6433 (11 November 2013)
Event 513 errors in Windows 8.1
Possible Macrium Issue?
In any case, is it currently safe to use Macrium Reflect (latest free version), from the point of view of operating system integrity (with Windows 8.1)?I'm a little scared that this "Event 513 error" issue could corrupt Windows 8.1 in some way.
I've been getting this single warning since the very first boot after a clean install of Windows 8 Pro. This is the only warning I get along with 19 informationals that are easy to understand and logical.
Event ID 1530, User Profiles Services
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL - 1 user registry handles leaked from RegistryUserS-1-5-21-4208045085-1828888239-1443801484-1001:
Process 1028 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-
Today, I started up my PC and after browsing on it for an hour I noticed a LiveKernelEvent hardware error in the Performance and Reliability graph. Looking at the time of the error, it appears that it occurred seconds after booting up my PC. The weird thing is that the PC didn't act strange or freeze up. Also, googling this error shows that it's mainly associated with BSOD's while my PC didn't give any.
I couldn't find any errors about it in the logs but there is only an information log about it (Dutch):
Foutbucket , type 0 Naam van gebeurtenis: LiveKernelEvent (name of event) Antwoord: Niet beschikbaar Id van CAB-bestand: 0
[Code] ....
Note that at Parameter 1 a code named "ab" is given which I couldn't find at all on the internet (usually P1 codes are numbers). Also, I could only find 2 files that were given by the error log (see attachment). There are no minidumps in C:/windows while it is enabled in the options to register any.
What the cause of this error by looking the files. I just recently formatted my PC and installed all latest updates.
Specs: Windows 8.1 Pro 64 bit with Media Centre i5-3570K (stock) GTX 660Ti 8GB RAM
I think I got this Event Log error after I upgraded to 8.1 but I' not sure. Anyway, when I go to event viewer I get a message that says "One or more logs in the query have errors" and then is says the Log that it cannot find is "Microsoft-Windows-DxpTaskRingtone/Analytic". I have looked and the log does not exist and OF COURSE when I try to cheat the system and create the log it does not like the "/" in the name! What the heck is going on and how I can tell Windows 8.1 to create the log.
I recently upgraded to Windows 8.1 from Windows 8 and started getting a whole bunch of Event Log Errors. Today I downloaded and installed new drivers for Windows 8.1 that were posted on the ASRock site dated 10/25/2013. Much to my surprise the new drivers actually made most of the Event Log Errors go away - at least for now!
The first one is the Event ID 257, Defrag Error. I did a fresh install of Windows 8 and let it setup the SSD with the three partitions - Recover Partition, EFI System Partition and the Windows 8 Partition. I use Acronis 2013 to back up the SSD on a regular basis! For some reason Windows 8.1 wants to Defrag a partition on the SSD? What do I have to change to make the Event Log Error stop. What have I done to cause the problem?
The second one is the Event ID 10016, DistributedCom Error. I have Googled/Binged and have come up with what appears to be, at least for a novice, convoluted procedures to fix. Is there a real straight forward detailed instruction on how to go about changing whatever it is that needs to be changed to fix the error. Again, what did I do to the system to make this error happen?
I'm real close to a system that might be Event Log Error free (at least for a moment) if that is possible.
I have been having this issue for a week or 2 and I have tried all sorts of fixes. Hard drive tests as fine. I have done a registry edit to add ahci to power management, I have deleted the sata controller and installed generic ahci drivers nothing seems to fix this.
I have a second hard drive on my HP DV7 laptop. It's a 750GB Hitachi.
Last week I started getting a SMART event and it would ask if I wanted to check the disk. Now every time I start the computer, it's running chkdsk and found a bunch of bad clusters. Also Some of my directories are missing, yet the space available remains the same, so its not deleting the directories and freeing up the space.
I'm recovering the data tonight but I have a few questions:
1) My data recovery software has the option to skip bad directories. Should I do this? And if I do not skip this, will this simply transfer the errors to the hard drive that I'm recovering to.
2) If I clean and then reformat, will the disk be usable? Or should I just junk it and get a new one.
I'm running Windows 8.1 Pro x64. I just began to get an Event ID 1 in my event log at boot time. It's only a warning and can probably be ignored it but curious minds like to know what is causing it and possibly how to fix it. Here's all the specifics as recorded in my event log:
The backing-file for the real-time session "DiagLog" has reached its maximum size. As a result, new events will not be logged to this session until space becomes available. This error is often caused by starting a trace session in real-time mode without having any real-time consumers.
"The maximum file size for session "Circular Kernel Context Logger" has been reached. As a result, events might be lost (not logged) to file "C:Windowssystem32WDILogFilesBootCKCL.etl". The maximum files size is currently set to 104857600 bytes."
"Session "Circular Kernel Context Logger" stopped due to the following error: 0xC0000188"
These two messages went away for awhile and now the're are back. How to make them go away? I don't think I did anything with tracing to make this happen?! I know I should make a pledge to never look at the Event Log but...every once in awhile I uncover something that can be fixed. I have Googled the messages but don't seem to be able to find any real solution. I tried deleting the .etl file but it fills up on the next boot.
I have a HP Pavillion PC which is connected to my wireless network due to restrictions in the house. I have been having some issues which i suspect are related. Nearly every day now i either lose wireless connection, even though other devices near by have no issues or my outlook stops sending/receiving. I just get the progress bar and nothing happens. The only way i can solve these issues is by a restart which is starting to get tedious now.
I have looked through my error logs and i seem to have this event that pops up...
Closing a TCP socket with local port number 50513 in process 1008 is taking longer than expected. The local port number may not be available until the close operation is completed. This happens typically due to misbehaving network drivers. Ensure latest updates are installed for Windows and any third-party networking software including NIC drivers, firewalls, or other security products.
I have updated my wireless card drivers to the very latest i can obtain. I have even tried plugging in a usb Wireless Belkin adapter and still no joy.
I really want to avoid a full windows reinstall but i cannot carry on like this.
