In Event Viewer lots of Errors & Warnings showing.these are in Windows 7..plz tell me is there something i need to worry about ? i ran event viewer cleaner 4-5 times that is Win7 Viewer in windows seven forums.but after some time event viewer again fill with errors & warnings.My Event Viewer log >>
View 9 Repliesi got this computer since october last year and and I'm noticed that lately had a few errors on Event Viewer! Some of them appears Critical​.
View 1 Replies View RelatedLately, while browsing, the computer start to freeze in this way:
First the browser (any browser) gets stuck loading pages but it is responsive (I can change tabs, scroll, select text etc)
The taskbar stops working at all and the mouse cursor changes to spinning circle when I hover on it.
The desktop screen seems to work at first, but it freezes too with the spinning circle if I open anything or right click.
CTRL ALT DEL, ALT TAB and start screen shortcuts won't work.
I have to reset because I can't reach shutdown or reboot options. Then the computer returns to normal.
Checked hard disk, and sfc /scannow without any errors. No errors in Event viewer.
Since installing Windows 8 Professional 64bit I have been experiencing lots of differnt erros / warnings in event viewer. I have attached an admin log from event viewer which shows the majority of the erros. I currently have all the latest drivers and Windows updates installed. I have contacted Gigabyte for a newer BIOS and they provided me with the latest BETA Bios that they have but this still dates back to 2011.
I have also installed the latest firmware available for my Corsair 120GB SSD. How I can go about resolving these errors.
Clean install, right from the beginning I see on a daily basis errors stating something like the zune music and video apps cannot be updated, it won't update from store either, I'm just guessing where this isn't released to the public yet.
View 2 Replies View RelatedI downloaded a custom keylogger made in Visual Basic. (To tinker with the code and see how it works, nothing malicious.) but suddenly Windows Defender gives me an alert.
I'm thinking it's just a harmless little mistake, so i deleted the files and cleaned my PC with MalwayreBytes, Spybot & Windows Defender.
MalwareBytes found 8 virus'.
Spybot found 5 virus'.
Windows Defender found 7 virus'.
I removed them all and it seemed fine now, but i was wrong.
Windows Defender keeps popping messages up saying that there is a new virus found:
1. The icon that shows when something is removed but the virus ISN'T removed.
2. It gives me an error in the "Status" bar and it doesn't have the "Removed" text in the "Anbefalet Handling" as it normally would have but rather "Quarantine".
3. Immediately when it has "cleaned" my PC, this message pops up telling me there's a virus found and i need to scan it again to remove it.
It's the same virus: HackTool:Win32/Passview
The weird thing is, i recovered my PC to an earlier stage, where i haven't downloaded it and it's still detecting. It's like nothing happened at all. I think Windows 8.1 kept my files, just not the programs i had installed.
When i click on "View all elements found", another 3 virus' are found:
They're all in "Quarantine" and not "Removed" as they should be.
This is the log that Windows Defender produces:
containerfile:C:ProgramDataMicrosoftWindows DefenderLocalCopy{0500BD49-0C7E-42DA-AC8A-A9E76FB9881B}-Drops Logger By Jay.7z
containerfile:C:ProgramDataMicrosoftWindows DefenderLocalCopy{80E718F2-A291-4EB1-AAC1-8A329FB03862}-Drops Logger By Jay.7z
[Code] ......
keep getting it logged as an error. I have gone into Adjust Date and TimeInternet Timeand it is set to automatically synchronize with time.windows.com and on a scheduled basis. When I try to update or change the setting I get an error message that an error occurred while windows was synchronizing. I have tried to do a system file check but get the error message that Windows Resource Protection could not perform the requested service or start the Repair Service. I have checked that Windows Modules Installer is set to manual and so I don't know how else I can repair this error 131.
View 6 Replies View RelatedI don't know what happened but I can no longer open Event Viewer. When I click on the icon to open it, the computer appears to work for a split second but then nothing happens. No window opens or anything.
View 5 Replies View RelatedGetting Thousands of Errors 240 in Event Viewer under Application and Service Logs, Microsoft, Windows, Application Resource Management System.
View 1 Replies View RelatedHow do you clear event viewer? Do windows, do it for you? I have recurring 910 and SENT something to do with taskhostex.exe under performance and slower than usual computer. The only thing I have done is install IObit driver program after MS win update screwed up AMD 7420G graphics driver and caused a crash. Should I uninstall IObit, and see if that fixes it? The drivers installed by IObit will still be there to load? IObit fixed the crash
View 1 Replies View RelatedI started up my computer and Windows explorer randomly froze up and hung. I didnt do anything to provoke it. I just sat here waiting for my computer to boot up.Then when I thought it was finished I opened firefox. Then Windows explorer just freezes completely. I tried doing windows key + r. It opened the run window but it froze. Then I tried moving my mouse on the right to open up the charm bar, ( I think it's called that) to hit settings and then restart. When I clicked settings the whole bar just closed out and would close out every time.
I right clicked on the task bar to try and open task manager. When I clicked on task manager it wouldn't ever open. So I couldn't even shut down properly. I just pushed the power button. Then I turned it on again and the same exact thing happened.So I shut it off again.
Then I turned it back on and went to msconfig before it froze up and I set it to boot into safe mode.Then I got into safe mode and ran a malware bytes scan and an avast scan. Nothing came up on either so I just went back to normal boot. The problem stopped now but I want to know what caused that whole thing to happen because it hasn't happened to me before.So I want to look at event viewer to see if that'll explain it. Where would I find that at in event viewer?
I keep getting this upon opening my win 8.1 event viewer and how to get rid of it here is what it says.
microsoft-windows-dxptaskringtone/analytic the system cannot find the file specified.
Message: "MMC could not create the required snap-in".
There are no headings in the console, it is blank, while all the requisite services are running ....
While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.
View 1 Replies View RelatedHeres the log from event viewer:
Log Name: Application
Source: Application Error
Date: 6/2/2014 1:20:44 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
[Code] .....
Thats the end of the log. I just got this computer back from servicing...
Whether or not these batch files that I use to clear the Event Viewer logs and to activate the extended disk cleanup prompt of windows 7 are compatible with Windows 8.1.
-Event Viewer log clean up batch file
@echo offFOR /F "tokens=1,2*" %%V IN ('bcdedit') DO SET adminTest=%%VIF (%adminTest%)==(Access) goto noAdminfor /F "tokens=*" %%G in ('wevtutil.exe el') DO (call :do_clear "%%G")echo.echo goto theEnd:do_clearecho clearing %1wevtutil.exe cl %1goto :eof:noAdminexit
I recently upgraded to Windows 8.1 from Windows 8 and started getting a whole bunch of Event Log Errors. Today I downloaded and installed new drivers for Windows 8.1 that were posted on the ASRock site dated 10/25/2013. Much to my surprise the new drivers actually made most of the Event Log Errors go away - at least for now!
The first one is the Event ID 257, Defrag Error. I did a fresh install of Windows 8 and let it setup the SSD with the three partitions - Recover Partition, EFI System Partition and the Windows 8 Partition. I use Acronis 2013 to back up the SSD on a regular basis! For some reason Windows 8.1 wants to Defrag a partition on the SSD? What do I have to change to make the Event Log Error stop. What have I done to cause the problem?
The second one is the Event ID 10016, DistributedCom Error. I have Googled/Binged and have come up with what appears to be, at least for a novice, convoluted procedures to fix. Is there a real straight forward detailed instruction on how to go about changing whatever it is that needs to be changed to fix the error. Again, what did I do to the system to make this error happen?
I'm real close to a system that might be Event Log Error free (at least for a moment) if that is possible.
Win 8x64. I play music a lot with foobar2000 - mp3 files, CDs - most often but not always using its ASIO/JPlay device and driver; i.e., I also use JPlay (service + process + settings - JPLAY - hi-end audio player for Windows). Lately, I've had some computer freezing problems and that's why I write. For example, before leaving for the weekend, I played music for 13 hours, no problem. Returning home yesterday, starting the computer and then the music in exactly the same fashion, within minutes I started getting a string of computer freezes, all occurring when music was playing.
On a previous occasion, I had run a few malware scans that turned up nothing, so I tried to isolate the problem by removing pieces step by step, starting with getting JPlay out of the way, so it was foobar alone, but none worked (my working hunch has been that the problem is foobar itself or the ASIO/JPlay combo getting corrupted somehow). Finally, I uninstalled and reinstalled foobar again and it played ok, although I didn't let it go for long enough to be sure. Then I added JPlay and things seemed ok for awhile, then came back after 90 minutes to find a freeze.
Looking at Admin Events, I notice the following happening a lot, at startup and maybe also related to when the crashes occur:
- The Open Procedure for service "WmiApRpl" in DLL "C:Windowssystem32wbemwmiaprpl.dll" failed. (1008)
- Windows cannot load the extensible counter DLL rdyboost (1023)
- The Open Procedure for service "MSDTC" in DLL "C:Windowssystem32msdtcuiu.DLL" failed. (1008)
- The Open Procedure for service "Lsa" in DLL "C:WindowsSystem32Secur32.dll" failed. (1008)
- The Open Procedure for service "ESENT" in DLL "C:Windowssystem32esentprf.dll" failed. (1008)
- The Open Procedure for service "BITS" in DLL "C:WindowsSystem32itsperf.dll" failed. (1008)
I ran sfc /scannow as admin and it apparently fixed some things and said it couldn't fix others. See the screenshot below, as well as the CBS log file.
I'd like to figure out if Windows has become corrupted or is producing the problem. There's also extreme hostility over at foobar re use of other players, specifically JPlay.)
Gigabyte Z68X-UD3H-B3, i7 2660K cpu, 16gb RAM
-----------
2013-07-22 11:28:59, Info CBS TI: --- Initializing Trusted Installer ---
2013-07-22 11:28:59, Info CBS TI: Last boot time: 2013-07-22 11:08:26.494
2013-07-22 11:28:59, Info CBS Starting TrustedInstaller initialization.
2013-07-22 11:28:59, Info CBS Ending TrustedInstaller initialization.
2013-07-22 11:28:59, Info CBS Starting the TrustedInstaller main loop.
2013-07-22 11:28:59, Info CBS TrustedInstaller service starts successfully.
2013-07-22 11:28:59, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2013-07-22 11:28:59, Info CBS Startup processing thread terminated normally
2013-07-22 11:28:59, Info CBS Starting TiWorker initialization.
[code].....
"Restart to repair drive errors" keep showing up after reboot !!
it's showing again & again....how to fix this ...
this is windows 8 not windows7
Before upgrading to 8.1 I had a cool Photo Viewer. It was the default viewer so I do not have an app name.
When I selected Photos from the main Start screen, there would be 10 to 15 photos on the screen at the same time and different sizes (large thumb nail). Plus the photos changed individually in a random way. Selected photos randomly from different folders. Very cool.
After upgrading to 8.1 all I get are full screen individual photos in a slide show format.
Is there an app that I should download or am I missing something?
If I download a .PDF document and then open it from the browser (Chrome) downloads area, the PDF is opened using the inbuilt Windows 8 PDF viewer in the Metro interface. I would like to change that so I can open it using a PDF viewer of my choice (say Nitro for example) and preferably on the desktop instead of metro.
how to do that?
In the Metro screen, some shortcuts have an icon that looks like the Windows Photo Viewer icon. Some of these programs are: Macrium Reflect, Microsoft Mouse and Keyboard Center, TightVNC Viewer and Adobe Reader XI. See the screenshot below. How can I restore the icons, and prevent it from happening again?
View 9 Replies View RelatedI'm looking a better photo viewer for my new window 8.1. I was using the photo viewer that came with essentials.
View 3 Replies View RelatedI have copied my DVDs using CloneDVD2 to my Hard drive. What I do now to view them on TV using WD from my Hard drive. They are in lots of files/chapters instead of one movie format. I assumed once copied I could just drop them into my movie file location to view.
View 6 Replies View RelatedI tried to make some animated pictures using photoshop [just trying and i know it's not good at all]
The problem here is that it works well when i view it using google chrome but it shows only one frame i.e no animation in windows picture and fax viewer. I remember it was working well in my old PC which run XP.
I want to see a JPG that I viewed some time ago in the default viewer of Windows 8. Do copies of previously viewed pictures still exist in a directory somewhere? If so, how can I find them?
View 2 Replies View RelatedThis issue it happens for too long I can't open photos of any kind with the windows photo viewer, I don't know how it happened and I don't remember when. When I try to open nothing happens.. its like something happens for a fraction of a second and nothing. I tried almost everything, well, accept for restore but there is no chance I am doing it the cost is too big.
I just noticed that when i try to view a photo file, two processes pop for a fraction of a sec and immediately disappear, one is COM Surrogate and the other Windows Problem Reporting.
I'm trying to print images/pictures using windows photo viewer and I get this error "Your pictures can't be printed because this error occurred".... It doesn't tell me which error.. simply just says that in the dialog box. THe dialog box comes out like 4 times with the same message and I have to click OK.
I've already tried googling it and the only fix I can find is replacing photowiz and I already did but it has fixed. I've also installed Photo Gallery and it stil lgives me the same error when I try to print and picture. I've also reinstalled all my printer drivers...
Windows 8.1 Updates installed . HP Computer
Animated gifs and windows photo viewer Solved - Windows 7 Forums
Does it work to window 8.1 ( No Problem/Errors/Any Issue) ?? and maybe there is something better ?
Windows Photo Viewer ? now when I open picture I see it not in max size of windows.
View 8 Replies View RelatedI have accidentally changed the Icon for the Picture Viewer on the Start Metro Screen.
I opened a Scan image and by default it used the Picture Program that was bundled on the Start Screen.
Somehow I made the Scan the default new icon, which looks awful. How can I get the Icon back to its original?