Win 8x64. I play music a lot with foobar2000 - mp3 files, CDs - most often but not always using its ASIO/JPlay device and driver; i.e., I also use JPlay (service + process + settings - JPLAY - hi-end audio player for Windows). Lately, I've had some computer freezing problems and that's why I write. For example, before leaving for the weekend, I played music for 13 hours, no problem. Returning home yesterday, starting the computer and then the music in exactly the same fashion, within minutes I started getting a string of computer freezes, all occurring when music was playing.
On a previous occasion, I had run a few malware scans that turned up nothing, so I tried to isolate the problem by removing pieces step by step, starting with getting JPlay out of the way, so it was foobar alone, but none worked (my working hunch has been that the problem is foobar itself or the ASIO/JPlay combo getting corrupted somehow). Finally, I uninstalled and reinstalled foobar again and it played ok, although I didn't let it go for long enough to be sure. Then I added JPlay and things seemed ok for awhile, then came back after 90 minutes to find a freeze.
Looking at Admin Events, I notice the following happening a lot, at startup and maybe also related to when the crashes occur:
- The Open Procedure for service "WmiApRpl" in DLL "C:Windowssystem32wbemwmiaprpl.dll" failed. (1008) - Windows cannot load the extensible counter DLL rdyboost (1023) - The Open Procedure for service "MSDTC" in DLL "C:Windowssystem32msdtcuiu.DLL" failed. (1008) - The Open Procedure for service "Lsa" in DLL "C:WindowsSystem32Secur32.dll" failed. (1008) - The Open Procedure for service "ESENT" in DLL "C:Windowssystem32esentprf.dll" failed. (1008) - The Open Procedure for service "BITS" in DLL "C:WindowsSystem32itsperf.dll" failed. (1008)
I ran sfc /scannow as admin and it apparently fixed some things and said it couldn't fix others. See the screenshot below, as well as the CBS log file.
I'd like to figure out if Windows has become corrupted or is producing the problem. There's also extreme hostility over at foobar re use of other players, specifically JPlay.)
Gigabyte Z68X-UD3H-B3, i7 2660K cpu, 16gb RAM ----------- 2013-07-22 11:28:59, Info CBS TI: --- Initializing Trusted Installer --- 2013-07-22 11:28:59, Info CBS TI: Last boot time: 2013-07-22 11:08:26.494 2013-07-22 11:28:59, Info CBS Starting TrustedInstaller initialization. 2013-07-22 11:28:59, Info CBS Ending TrustedInstaller initialization. 2013-07-22 11:28:59, Info CBS Starting the TrustedInstaller main loop. 2013-07-22 11:28:59, Info CBS TrustedInstaller service starts successfully. 2013-07-22 11:28:59, Info CBS No startup processing required, TrustedInstaller service was not set as autostart 2013-07-22 11:28:59, Info CBS Startup processing thread terminated normally 2013-07-22 11:28:59, Info CBS Starting TiWorker initialization.
In Event Viewer lots of Errors & Warnings showing.these are in Windows 7..plz tell me is there something i need to worry about ? i ran event viewer cleaner 4-5 times that is Win7 Viewer in windows seven forums.but after some time event viewer again fill with errors & warnings.My Event Viewer log >>
Since installing Windows 8 Professional 64bit I have been experiencing lots of differnt erros / warnings in event viewer. I have attached an admin log from event viewer which shows the majority of the erros. I currently have all the latest drivers and Windows updates installed. I have contacted Gigabyte for a newer BIOS and they provided me with the latest BETA Bios that they have but this still dates back to 2011.
I have also installed the latest firmware available for my Corsair 120GB SSD. How I can go about resolving these errors.
keep getting it logged as an error. I have gone into Adjust Date and TimeInternet Timeand it is set to automatically synchronize with time.windows.com and on a scheduled basis. When I try to update or change the setting I get an error message that an error occurred while windows was synchronizing. I have tried to do a system file check but get the error message that Windows Resource Protection could not perform the requested service or start the Repair Service. I have checked that Windows Modules Installer is set to manual and so I don't know how else I can repair this error 131.
I don't know what happened but I can no longer open Event Viewer. When I click on the icon to open it, the computer appears to work for a split second but then nothing happens. No window opens or anything.
How do you clear event viewer? Do windows, do it for you? I have recurring 910 and SENT something to do with taskhostex.exe under performance and slower than usual computer. The only thing I have done is install IObit driver program after MS win update screwed up AMD 7420G graphics driver and caused a crash. Should I uninstall IObit, and see if that fixes it? The drivers installed by IObit will still be there to load? IObit fixed the crash
I started up my computer and Windows explorer randomly froze up and hung. I didnt do anything to provoke it. I just sat here waiting for my computer to boot up.Then when I thought it was finished I opened firefox. Then Windows explorer just freezes completely. I tried doing windows key + r. It opened the run window but it froze. Then I tried moving my mouse on the right to open up the charm bar, ( I think it's called that) to hit settings and then restart. When I clicked settings the whole bar just closed out and would close out every time.
I right clicked on the task bar to try and open task manager. When I clicked on task manager it wouldn't ever open. So I couldn't even shut down properly. I just pushed the power button. Then I turned it on again and the same exact thing happened.So I shut it off again.
Then I turned it back on and went to msconfig before it froze up and I set it to boot into safe mode.Then I got into safe mode and ran a malware bytes scan and an avast scan. Nothing came up on either so I just went back to normal boot. The problem stopped now but I want to know what caused that whole thing to happen because it hasn't happened to me before.So I want to look at event viewer to see if that'll explain it. Where would I find that at in event viewer?
While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.
Clean install, right from the beginning I see on a daily basis errors stating something like the zune music and video apps cannot be updated, it won't update from store either, I'm just guessing where this isn't released to the public yet.
Whether or not these batch files that I use to clear the Event Viewer logs and to activate the extended disk cleanup prompt of windows 7 are compatible with Windows 8.1.
-Event Viewer log clean up batch file
@echo offFOR /F "tokens=1,2*" %%V IN ('bcdedit') DO SET adminTest=%%VIF (%adminTest%)==(Access) goto noAdminfor /F "tokens=*" %%G in ('wevtutil.exe el') DO (call :do_clear "%%G")echo.echo goto theEnd:do_clearecho clearing %1wevtutil.exe cl %1goto :eof:noAdminexit
I recently upgraded to Windows 8.1 from Windows 8 and started getting a whole bunch of Event Log Errors. Today I downloaded and installed new drivers for Windows 8.1 that were posted on the ASRock site dated 10/25/2013. Much to my surprise the new drivers actually made most of the Event Log Errors go away - at least for now!
The first one is the Event ID 257, Defrag Error. I did a fresh install of Windows 8 and let it setup the SSD with the three partitions - Recover Partition, EFI System Partition and the Windows 8 Partition. I use Acronis 2013 to back up the SSD on a regular basis! For some reason Windows 8.1 wants to Defrag a partition on the SSD? What do I have to change to make the Event Log Error stop. What have I done to cause the problem?
The second one is the Event ID 10016, DistributedCom Error. I have Googled/Binged and have come up with what appears to be, at least for a novice, convoluted procedures to fix. Is there a real straight forward detailed instruction on how to go about changing whatever it is that needs to be changed to fix the error. Again, what did I do to the system to make this error happen?
I'm real close to a system that might be Event Log Error free (at least for a moment) if that is possible.
I had been running windows 8 for a while, and within the last month I installed a new video card (Nvidia EVGA GTX560ti), and a new SSD (OCZ vertex 4 256GB). While still running Windows 8, I had been playing games, doing a lot of photoshop work....and other various CPU intensive things. I was editing photos one day in photoshop CS5 , and I noticed that the program became somewhat slow all of the sudden (basic tasks that used to be very quick and painless). The program eventually became unresponsive and had to reboot the computer. Upon restart I got all sorts of "boot drive errors", and unreadable boot disk errors.
However, these errors only seem to happen randomly. I checked my CPU core temps, and while doing the regular work I do on the computer, all 4 cores averaged about 92 degrees Celsius! I ran a virus scan, for something unrelated, and I checked the temps and they were spiking 98 to 100 Celsius!!!! While im just using the computer regularly they settle around 65-70. But if I do ANYTHING slightly intensive, I could probably cook dinner on my heatsink. I guess my main question is WHY am I getting boot errors, and why do they seem to happen randomly. I suppose the motherboard could be fried, im really not sure. This happened in the past, and reinstalled windows 8. After a couple days, same story. I'm almost positive this is a hardware thing. My first priority is of course to lower the CPU temps however I can.
I have a HP Pavillion Sleekbook 15-b002ee with Third generation core i5 processor 1.7 GHz, 500 GB Hard disk and 4 GB of RAM installed. Windows 8 came pre installed on it.
I bought this laptop 11 months ago and it worked fine for 10 months and then from the last month its presenting unusual problems. My disk usage is stuck at 100% and the laptop freezes and never lets me work or do anything. Heres what i have already done to solve the issue but have been unsuccessful:
1) I have reset my PC completely and reinstalled windows 8 using the factory setup. Didnt solve the issue, newly installed windows displays the disk usage 100% and the performance is same i.e the system freezes.
2) I have tried adjusting my paging file, no change made a difference to the performance of my laptop. The default system managed Paging file size is something around 3.89 Gb. Does my problem have anything to do with my paging file?
3) disabling the "Windows Search" and "Superfetch" services and still it didnt solve the problem.
4) I have also run checkdisk on my hard drive completely. It took me a complete day to do so but still no change.
5) Before resetting my laptop, an error called "Kernel_data_inpage(http.sys)" used to come on my upgraded windows 8.1. Whats the issue?
So what should i do? Is there any problem with my hardware? Is my hard drive having bad sectors and is that causing the problem?
I've been having a network problem since Refreshing Windows 8.1 Pro Update 64 bit on one of my PC's. I've been able to see other PC's OK but unable to see some devices (eg Diskstation NAS etc) on my network (all connected using Ethernet cables).
I've tried all sorts of things to cure the problem and all to no avail.
I just noticed that in Services there was no Computer Browser so I guess this is my problem. I copied over the browser.dll file from another PC (using the same operating system) to the Windows/System32 folder but after a reboot there was still no Computer Browser in Services. I ran a couple of scripts I found, a registry hack and something else to restore the Computer Browser then I uninstalled the Client for Microsoft Networks, rebooted and re-installed the client.
Now when I look in Services it's listed as Browser instead of Computer Browser and in the Description column it says "Failed to read description. Error Code: 15100. The error code has now changed to error code 2.
What I can try next other than a clean re-install?
The description for Event ID 0 from source amdacpusrsvc cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The description for Event ID 0 from source amdacpusrsvc cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
amdacpusrsvc acpusrsvc: GraphicsMemory API Wrapper: Dummy Packet Submission FAILED
And now the information message Note i never put my computer to sleep.
The system has returned from a low power state.
Sleep Time: 2014-08-25T22:39:55.069952300Z Wake Time: 2014-08-25T22:40:21.165214600Z Wake Source: Unknown
Lately, I have been experiencing freezes, I presume while browsing with Google Chrome. They happen randomly and when my computer freezes, I can still click on icons, close/open tabs on Chrome and generally move my mouse. The only issue is that my computer won't respond to any action performed. There is no blue screen associate, there are no "Program not responding" issues, just a freeze that lasts around 10-20 seconds.
So this is a problem I've had with my PC for a long time now, and just never got around to finding a solution. Half the time when I attempt to restart my computer the computer just freezes at the restart screen. So installing software generally results in a crash, I feel as though since my computer simply crashes during half the windows updates that issues are going to begin to stack up.
I recently upgraded both my motherboard to an Asus M5a99FX PRO R2.0 and my CPU to an AMD FX 8350 and I've been experiencing some complete freezes playing games like Battlefield 4, Shadow Warrior and Skyrim. In my old build (with a Gigabyte 880GM-USB3L and a Phenom II x4 955BE) the same games would perform okay and I never really experienced any crashes or freezes.
The problem now is that at what are apparently random intervals no longer than 15 minutes during gaming my cpmputer will completely freeze, audio stops, I cannot open the task manager and I even tried toggling Caps Lock and the LED on my keyboard wouldn't toggle. I would leave it stuck there for a couple of minute but nothing would happen, forcing me to hard reset the system.
I can use the computer for regular browsing and video streaming (I think I can alsop play some older games without freezing) without freezes too, which is kind of odd.
My PC specs would be: OS: Windows 8.1 Pro 64-bitMobo: Asus M5A99FX PRO R2.0CPU: AMD FX-8350 (not overclocked)GPU: Nvidia GTX 660Ti GC 3GB (not overclocked either)Memory: 2 modules of some 4GB Kingston KVR1333D3N9/4G PSU: Thermaltake TR2 RX 650W HDD: Seagate ST2000DM001 (2TB)
So far what I've done to try to find a solution to the freezing is rolling back video drivers, then installing the most recent ones again, upgrading to the most recent version of the BIOS for my mobo and my chipset drivers, I've checked the connections on the mobo to make sure everything is installed fine, I've reseated the RAM and the GPU, I've run 2 cycles of memtest86+ to find no errors, I've also run Furmark's GPU burner and CPU burner (both for about 20 minutes) and I haven't crashed on them. My temperatures also don't get too excessive (CPU does't go over 43C and my GPU doesn't go over 64C). I also removed the Realtek Audio drivers and the freezing persisted.
I have had this problem with my hp Envy 6 ever since I got it. I installed windows 8 on it however when ever i would right click anywhere in my computer (the view/refresh menu would come however the new/view/sort one would not come) it no matter if it be with the trackpad or a mouse the blue circle would start spinning forever and i would be forced to close the folder i currently have:
Core i-5 1.7 Ghz 4.00 Gb RAM 64 bit Windows 8
(I am not all that sure whether or not i have windows 8 or 8.1 so i can't really say)
I have provided a recording that i have provided in the attachement below:
Many times in the past when I buy a new computer, I backup the hard drive of the one I am getting rid of to an external drive, I then try to access from the new computer and I get permission errors.
I'm about to replace my computer yet again and I was wondering the best way to do this to avoid any issues.
This is the first time I am doing it between 2 Windows 8.1 computers and wondering since I login to both with my microsoft account, if the issues will still be there.
Also, free backup software would work too. I usually use free version of Macrium but it has become a lot more limited.
windows 8 Games app the green app with a Xbox controller freezing computer. It just happened to me was very strange i was renewing my Xbox live threw it as you can do that. and the Games app freeze my screen not all the way the mouse moved very slow,and it would freeze from time to time. and then it went from the Games app to the modern interface and then back into Games app,and then it finally came out of it. It has been OK since could it be the application hung up?
Lately I have been having major problems with my other computer as it started to freeze constantly and keep messing up then ended up just somehow frying itself, I got a new one and it has been freezing for a few seconds at a time usually when i'm using chrome (it's happened about 6 times so far) and i'm really scared that this might be a messed up PC too.
After two refresh and one clean install of Windows 8 within a two-week period, my computer freezes while I'm running CCleaner. It always stops at the same file:
CUserAppDataLocalTemp\_ME149482PyWinTypes26.dll
First few minutes, I can still use my computer, but after that, I cannot print, cannot open Task Manager, cannot shut down the computer. After numerous attempts, I'm able to close CCleaner, but my computer remains frozen.
My computer is running very slow all the time, but every 30 seconds - 10 minutes my computer freezes lots of times. I have downloaded a lot of things, and I downloaded something before and it made the computer run very slow. I just wanted to know if the download had anything to do with it.
I just recently installed a new anti-virus software (Kaskersky Anti-Virus 2013) and it runs perfectly (or so I thought).
The only problem that was plaguing my computer was after I restarted it (via the Sidebar and pressing the power icon and clicking restart) and it would "hang" at the restart screen for about 30 seconds.
The pixel icon next to the word "Restarting" would freeze mid spin (I could still move my mouse), but then it would continue to function normally.
So my question is simply: Is this an issue to take action against or is the Anti-Virus software preventing a proper restart?
NOTE: When I start a normal "Shutdown" this problem is absent and the computer shuts down in about 6 seconds.