Maintenance :: Event Viewer Shows A Lot Of Errors
Feb 25, 2014i got this computer since october last year and and I'm noticed that lately had a few errors on Event Viewer! Some of them appears Critical​.
View 1 Repliesi got this computer since october last year and and I'm noticed that lately had a few errors on Event Viewer! Some of them appears Critical​.
View 1 RepliesIn Event Viewer lots of Errors & Warnings showing.these are in Windows 7..plz tell me is there something i need to worry about ? i ran event viewer cleaner 4-5 times that is Win7 Viewer in windows seven forums.but after some time event viewer again fill with errors & warnings.My Event Viewer log >>
View 9 Replies View RelatedLately, while browsing, the computer start to freeze in this way:
First the browser (any browser) gets stuck loading pages but it is responsive (I can change tabs, scroll, select text etc)
The taskbar stops working at all and the mouse cursor changes to spinning circle when I hover on it.
The desktop screen seems to work at first, but it freezes too with the spinning circle if I open anything or right click.
CTRL ALT DEL, ALT TAB and start screen shortcuts won't work.
I have to reset because I can't reach shutdown or reboot options. Then the computer returns to normal.
Checked hard disk, and sfc /scannow without any errors. No errors in Event viewer.
Since installing Windows 8 Professional 64bit I have been experiencing lots of differnt erros / warnings in event viewer. I have attached an admin log from event viewer which shows the majority of the erros. I currently have all the latest drivers and Windows updates installed. I have contacted Gigabyte for a newer BIOS and they provided me with the latest BETA Bios that they have but this still dates back to 2011.
I have also installed the latest firmware available for my Corsair 120GB SSD. How I can go about resolving these errors.
keep getting it logged as an error. I have gone into Adjust Date and TimeInternet Timeand it is set to automatically synchronize with time.windows.com and on a scheduled basis. When I try to update or change the setting I get an error message that an error occurred while windows was synchronizing. I have tried to do a system file check but get the error message that Windows Resource Protection could not perform the requested service or start the Repair Service. I have checked that Windows Modules Installer is set to manual and so I don't know how else I can repair this error 131.
View 6 Replies View RelatedHow do you clear event viewer? Do windows, do it for you? I have recurring 910 and SENT something to do with taskhostex.exe under performance and slower than usual computer. The only thing I have done is install IObit driver program after MS win update screwed up AMD 7420G graphics driver and caused a crash. Should I uninstall IObit, and see if that fixes it? The drivers installed by IObit will still be there to load? IObit fixed the crash
View 1 Replies View RelatedI don't know what happened but I can no longer open Event Viewer. When I click on the icon to open it, the computer appears to work for a split second but then nothing happens. No window opens or anything.
View 5 Replies View RelatedGetting Thousands of Errors 240 in Event Viewer under Application and Service Logs, Microsoft, Windows, Application Resource Management System.
View 1 Replies View RelatedI started up my computer and Windows explorer randomly froze up and hung. I didnt do anything to provoke it. I just sat here waiting for my computer to boot up.Then when I thought it was finished I opened firefox. Then Windows explorer just freezes completely. I tried doing windows key + r. It opened the run window but it froze. Then I tried moving my mouse on the right to open up the charm bar, ( I think it's called that) to hit settings and then restart. When I clicked settings the whole bar just closed out and would close out every time.
I right clicked on the task bar to try and open task manager. When I clicked on task manager it wouldn't ever open. So I couldn't even shut down properly. I just pushed the power button. Then I turned it on again and the same exact thing happened.So I shut it off again.
Then I turned it back on and went to msconfig before it froze up and I set it to boot into safe mode.Then I got into safe mode and ran a malware bytes scan and an avast scan. Nothing came up on either so I just went back to normal boot. The problem stopped now but I want to know what caused that whole thing to happen because it hasn't happened to me before.So I want to look at event viewer to see if that'll explain it. Where would I find that at in event viewer?
I keep getting this upon opening my win 8.1 event viewer and how to get rid of it here is what it says.
microsoft-windows-dxptaskringtone/analytic the system cannot find the file specified.
Message: "MMC could not create the required snap-in".
There are no headings in the console, it is blank, while all the requisite services are running ....
While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.
View 1 Replies View RelatedHeres the log from event viewer:
Log Name: Application
Source: Application Error
Date: 6/2/2014 1:20:44 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
[Code] .....
Thats the end of the log. I just got this computer back from servicing...
Clean install, right from the beginning I see on a daily basis errors stating something like the zune music and video apps cannot be updated, it won't update from store either, I'm just guessing where this isn't released to the public yet.
View 2 Replies View RelatedWhether or not these batch files that I use to clear the Event Viewer logs and to activate the extended disk cleanup prompt of windows 7 are compatible with Windows 8.1.
-Event Viewer log clean up batch file
@echo offFOR /F "tokens=1,2*" %%V IN ('bcdedit') DO SET adminTest=%%VIF (%adminTest%)==(Access) goto noAdminfor /F "tokens=*" %%G in ('wevtutil.exe el') DO (call :do_clear "%%G")echo.echo goto theEnd:do_clearecho clearing %1wevtutil.exe cl %1goto :eof:noAdminexit
I recently upgraded to Windows 8.1 from Windows 8 and started getting a whole bunch of Event Log Errors. Today I downloaded and installed new drivers for Windows 8.1 that were posted on the ASRock site dated 10/25/2013. Much to my surprise the new drivers actually made most of the Event Log Errors go away - at least for now!
The first one is the Event ID 257, Defrag Error. I did a fresh install of Windows 8 and let it setup the SSD with the three partitions - Recover Partition, EFI System Partition and the Windows 8 Partition. I use Acronis 2013 to back up the SSD on a regular basis! For some reason Windows 8.1 wants to Defrag a partition on the SSD? What do I have to change to make the Event Log Error stop. What have I done to cause the problem?
The second one is the Event ID 10016, DistributedCom Error. I have Googled/Binged and have come up with what appears to be, at least for a novice, convoluted procedures to fix. Is there a real straight forward detailed instruction on how to go about changing whatever it is that needs to be changed to fix the error. Again, what did I do to the system to make this error happen?
I'm real close to a system that might be Event Log Error free (at least for a moment) if that is possible.
Four BSOD today, all with the same error. I can't think of anything that would have caused this. Memory test shows no errors with the RAM. Blue screen's have occurred both shortly after startup without any stress on the system, as well as after it hadn't been shut down for a while with lots open. I can't find anything that forces it to blue screen, seems fairly random (it's happened while I'm not even using the system). Dumps at the very bottom.
Much longer summary: I've got an Asus S400C on windows 8.1 that's about 6 months old. It's been really good to me but recently has seemed a little unstable,(or maybe that's me just thinking badly about it now! I would have said it occasionally hangs more than I think it should for a newish laptop) - but nothing I couldn't put up with. This morning it gave a BSOD with KERNEL_DATA_INPAGE_ERROR. In fairness it had been a while since it had been properly shutdown (i tend to just put it into standby by closing the lid) and I also had quite a lot of things open. I still wouldn't expect it to bluescreen like that though.
I think I've had the same blue screen once before, about 3 weeks ago. Today it blue screened four times in total - the three other times without me asking much of the laptop at all (only word, chrome and itunes open). Definitely not right!
I've run the memory test and it found no errors. Yesterday I replaced a qualcomm wifi driver with a microsoft one (both ones that were already on the system) but reverting back hasn't stopped the blue screens so I don't think it was related to that (it also was fine yesterday evening after changing). I've also uninstalled Asus Liveupdate because it's always saying it's "stopped working..."
It might be unrelated but 2 weeks ago I opened the lid of the laptop to find that I could move the cursor but had an otherwise blank screen (on, but displaying black except for a cursor. Normal resolution though!). I coudn't get it to do anything so held the power button, and when it turned back on it said it was doing automatic recovery, and checking the harddisk - it took about 3 hours to do. Afterwards it booted up and worked.
I've tried to investigate the dmp files with my basic ability to google and something that crops up is win8_driver_error. Also it usually says "Probably caused by : ntkrnlmp.exe".
All previous minidumps and first crash today - [URL] ....
The second minidump of today- [URL] ....
Third minidump - [URL] ....
Fourth minidump - [URL] ....
Left the computer on for a while and came back to it having restarted itself following a BSOD.
BSOD #4 today - [URL] .....
Win 8x64. I play music a lot with foobar2000 - mp3 files, CDs - most often but not always using its ASIO/JPlay device and driver; i.e., I also use JPlay (service + process + settings - JPLAY - hi-end audio player for Windows). Lately, I've had some computer freezing problems and that's why I write. For example, before leaving for the weekend, I played music for 13 hours, no problem. Returning home yesterday, starting the computer and then the music in exactly the same fashion, within minutes I started getting a string of computer freezes, all occurring when music was playing.
On a previous occasion, I had run a few malware scans that turned up nothing, so I tried to isolate the problem by removing pieces step by step, starting with getting JPlay out of the way, so it was foobar alone, but none worked (my working hunch has been that the problem is foobar itself or the ASIO/JPlay combo getting corrupted somehow). Finally, I uninstalled and reinstalled foobar again and it played ok, although I didn't let it go for long enough to be sure. Then I added JPlay and things seemed ok for awhile, then came back after 90 minutes to find a freeze.
Looking at Admin Events, I notice the following happening a lot, at startup and maybe also related to when the crashes occur:
- The Open Procedure for service "WmiApRpl" in DLL "C:Windowssystem32wbemwmiaprpl.dll" failed. (1008)
- Windows cannot load the extensible counter DLL rdyboost (1023)
- The Open Procedure for service "MSDTC" in DLL "C:Windowssystem32msdtcuiu.DLL" failed. (1008)
- The Open Procedure for service "Lsa" in DLL "C:WindowsSystem32Secur32.dll" failed. (1008)
- The Open Procedure for service "ESENT" in DLL "C:Windowssystem32esentprf.dll" failed. (1008)
- The Open Procedure for service "BITS" in DLL "C:WindowsSystem32itsperf.dll" failed. (1008)
I ran sfc /scannow as admin and it apparently fixed some things and said it couldn't fix others. See the screenshot below, as well as the CBS log file.
I'd like to figure out if Windows has become corrupted or is producing the problem. There's also extreme hostility over at foobar re use of other players, specifically JPlay.)
Gigabyte Z68X-UD3H-B3, i7 2660K cpu, 16gb RAM
-----------
2013-07-22 11:28:59, Info CBS TI: --- Initializing Trusted Installer ---
2013-07-22 11:28:59, Info CBS TI: Last boot time: 2013-07-22 11:08:26.494
2013-07-22 11:28:59, Info CBS Starting TrustedInstaller initialization.
2013-07-22 11:28:59, Info CBS Ending TrustedInstaller initialization.
2013-07-22 11:28:59, Info CBS Starting the TrustedInstaller main loop.
2013-07-22 11:28:59, Info CBS TrustedInstaller service starts successfully.
2013-07-22 11:28:59, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2013-07-22 11:28:59, Info CBS Startup processing thread terminated normally
2013-07-22 11:28:59, Info CBS Starting TiWorker initialization.
[code].....
So the problem is whenever I open Task Manager i check the performance section i see that RAM shows that 2.2 GB available.
View 6 Replies View RelatedIt has been a long, long time since I have wanted to clear the event log and that was under Windows 7. I would like to clear the log under Windows 8 but can find no way to do it. It seems like I remember using 'Clear Log' under Actions but that doesn't seem to be there in Windows 8.
View 5 Replies View RelatedThis is in my event log like 10932098434 times. The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{C2F03A33-21F5-47FA-B4BB-156362A2F239}
and APPID
{316CDED5-E4AE-4B15-9113-7055D84DCC97}
to the user CorsairAdam SID (S-1-5-21-728937790-313184532-559953268-1001) from address LocalHost (Using LRPC) running in the application container Microsoft.BingWeather_3.0.1.174_x64__8wekyb3d8bbwe SID (S-1-15-2-2040986369-264322980-3882385089-1970153872-3662121739-3363227934-2464603330).
This security permission can be modified using the Component Services administrative tool.
i am having a lot if event viewers logs with errors and my laptop running very slow; how to remove all those errors and how to clear event viewers log.
View 2 Replies View RelatedI got my new ASUS laptop on Mother's Day this year, and the first event happened a week later. I've had this same event happen 6 times since then as shown by the attached image.
I'm comfortable with computers but am not an IT person so I'm not comfortable performing tasks within my system unless I know what the heck I'm doing or why.
W7 forum said overclocking (it's not), heat (this last time it had been in sleep mode while I was out and within moments of waking it up it crashed), sudden loss of power (it's plugged in AND has 100% battery left) and so on. In other words, it doesn't appear to be related to any of those things. It just randomly happens.
1) why this keeps happening and
2) how to fix it?
I've been very disappointed in my new laptop since getting it; I've NEVER had such issues with a new computer before..and I thoroughly dislike Windows 8 and I doubt I'm alone in that view.
My 12 month old Win 8 64 bit self-build pc has been very stable and as yet, no BSODs.
I want to update /upgrade to Win 8.1 (I have also acquired the ISO) and have managed to execute a File History to my Samsung USB3 1TB ext HDD as a safeguard in preparation. I would prefer to update via the Store to avoid having to reinstall all my programmes
However the File History event log is indicating yellow warning signs and Code 204 errors. Detail states: "Unusual condition was encountered during finalisation of back up cycle for configuration". I am concerned therefore that this might prevent me properly doing a File History recovery should I need to. Researching elsewhere indicates that 204 errors result from corrupted system files.
I have checked the Ext HDD which has the File History folder (12.5 GB) and all my files seem to have been copied OK.
Has the "Event 513 error" issue been solved in the latest version of Macrium Reflect (Free)? This version: 5.2.6433 (11 November 2013)
Event 513 errors in Windows 8.1
Possible Macrium Issue?
In any case, is it currently safe to use Macrium Reflect (latest free version), from the point of view of operating system integrity (with Windows 8.1)?I'm a little scared that this "Event 513 error" issue could corrupt Windows 8.1 in some way.
I've been getting this single warning since the very first boot after a clean install of Windows 8 Pro. This is the only warning I get along with 19 informationals that are easy to understand and logical.
Event ID 1530, User Profiles Services
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL - 1 user registry handles leaked from RegistryUserS-1-5-21-4208045085-1828888239-1443801484-1001:
Process 1028 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-
1-5-21-4208045085-1828888239-1443801484-1001SoftwareMicrosoftWindowsCurrentVersionUninstall
Today, I started up my PC and after browsing on it for an hour I noticed a LiveKernelEvent hardware error in the Performance and Reliability graph. Looking at the time of the error, it appears that it occurred seconds after booting up my PC. The weird thing is that the PC didn't act strange or freeze up. Also, googling this error shows that it's mainly associated with BSOD's while my PC didn't give any.
I couldn't find any errors about it in the logs but there is only an information log about it (Dutch):
Foutbucket , type 0
Naam van gebeurtenis: LiveKernelEvent (name of event)
Antwoord: Niet beschikbaar
Id van CAB-bestand: 0
[Code] ....
Note that at Parameter 1 a code named "ab" is given which I couldn't find at all on the internet (usually P1 codes are numbers). Also, I could only find 2 files that were given by the error log (see attachment). There are no minidumps in C:/windows while it is enabled in the options to register any.
What the cause of this error by looking the files. I just recently formatted my PC and installed all latest updates.
Specs:
Windows 8.1 Pro 64 bit with Media Centre
i5-3570K (stock)
GTX 660Ti
8GB RAM
When I start up, log off, or shut down my PC, (Just upgraded to windows 8 pro a few days ago from windows 7 pro) I get a black screen for 30 seconds to a minute. The screen is back lit, and windows 8 still functions 100% afterward. I have updated all drivers.
View 6 Replies View RelatedI have loads of DCOM errors in Windows 8.1
"The server {9BA05972-F6A8-11CF-A442-00A0C90A8F39} did not register with DCOM within the required timeout."
Its filling out my logs a symptom is a sluggish computer.
I have run sfc /scannow on my system to find if there were any bad files. It comes up and says that it had found bad files and could not repair all of them. Ive run it three or four times in a row and always get the same result.
how I can get this to go all the way through?
I am running win 8 pro on a toshiba laptop R700 S1312 64 bit with 8G Ram. I am getting numerous 10016 errors (same error) after every restart.
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{7022A3B3-D004-4F52-AF11-E9E987FEE25F}
and APPID
{ADA41B3C-C6FD-4A08-8CC1-D6EFDE67BE7D}
to the user Don-PCDonald SID (S-1-5-21-2075968696-349866310-2035089026-1001) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.