I have run sfc /scannow on my system to find if there were any bad files. It comes up and says that it had found bad files and could not repair all of them. Ive run it three or four times in a row and always get the same result.
how I can get this to go all the way through?
I ran SFC and it complained that some corrupt files could not be repaired.
Here's the relevant part of the log:
Code:
2014-09-17 00:06:45, Info
CSI 00000520 [SR] Verifying 100 (0x0000000000000064) components2014-09-17 00:06:45, Info
CSI 00000521 [SR] Beginning Verify and Repair transaction2014-09-17 00:06:46, Info
CSI 00000522 Hashes for file member
[Code] .......
I have Windows 8 64 bit Pro Edition working fine using UEFI boot from a SSD disk. I've twice created a system repair disk on DVD but when I use boot override in the BIOS to boot from the DVD, I get the message "Non-system disk....
View 9 Replies View RelatedI had a problem where I was running UEFI with secure boot disabled and dual booting with Linux Mint which is UEFI compliant. Mint had installed Grub, Mint's boot manager but I don't like Grub so i installed rEFInd. Unlike Grub rEFInd has support for UEFI and should have worked better as a boot manager. But it gave me problems too. So I had Grub and rEFInd both installed. I could boot to both Mint and Windows but the boot managers, both Grub or rEFInd, would not show at startup like they are supposed to.
I had to boot the PC, then hit Escape getting into my options menu built into the system, hit F9 to get a list of boot options where i could then choose to boot from hard drive, cd rom, usb etc. rEFInd was in this list. Only after choosing rEFInd from here, was I able to open rEFInd and choose Windows or Mint. This is way too many steps to boot into an OS, so i thought i'd try to use the system repair disk to repair my master boot record or the EFI data that the system uses at boot under UEFI. I forgot that i had to run some additional commands under command prompt and just ran automatic repair from Advanced instead.
At this time Windows had no trouble working at all with secure boot enabled if I really needed windows to use secure boot.
It said it found but could not fix the errors. Suddenly, Windows would not boot even with secure boot enabled. I reran the tool 3 times and it didn't work so i wiped the drive and reinstalled Windows from a clean state. I really did not have errors on the system to begin with accept that the system was trying to access my boot managers in an odd manner.. although i could get everything to work.
The automatic repair option should not have made things worse, even breaking my secure boot but it did.
My point of this is to show that the repair disk tools and how they play with the EFI boot tools is buggy and it can break your system even if there is nothing wrong with Windows and it's ability to boot under secure boot. Don't trust the Repair Disk tool folks. Don't trust UEFI. Don't trust Secure Boot. Be smart. Install a clean system under Legacy Bios mode with UEFI and secure boot disabled.
Have a couple of different problems with my 8.1
When I try to use the tutorial,I get as far as the Product Key entry.
The install was an original 8 I downloaded when it first came out.
I then installed 8.1, probably from the Store.
I recently downloaded and install 8.1 Media Center Pack.
Had a real problem with activation.MS Support finally had me go to where there was a long activation string and then he gave me a new Product Key, which is now on the machine and Activated.
When I get to the "Product Key" page and enter the Media Pack key, "This product key didn't work. ....."
I am attempting to repair a Dell Inspiron 5520 Laptop for a friend of mine.
He's been having issues updating it for sometime and when he called me he was having a "Windows update hasn't been able to check for new updates for 30 days" pop-up appearing every few seconds that was rendering the laptop almost unusable.
I managed to stop that by disabling automatic updates. When I attempted a manual update I got the message :
Windows could not search for new updates: Error Found Code 80070BC9
Other times it would say it needed to be restarted and would go into a restart loop that was generally
Restart one - no message
Restart two - configuring updates - 33%, 67%, 100%
Restart three - failed to configure updates - reverting - restarting
Then would go to the normal login screen
I tried SFC /Scannow which seemed to work and say a restart is needed to implement changes but then fails on restart
DISM didn't work when attempting to run it from the machine but got to 100% when I ran it from my own Windows 8 install disk but then failed and needed a restart to undo the changes.
I also tried a repair and a restore of the current Windows installation but got : Error Code: 80070490 both times
The laptop didn't come with an install disk or serial so it seems restoring it from external media may be out of the question?
You have Windows 8 or Windows 8 Pro installed on your PC. Your PC fails to boot into Windows and launches Automatic Repair to attempt to repair Windows.
Automatic Repair is unable to repair your PC and you select "Advanced options". After selecting "Troubleshoot", you choose to either "Refresh your PC" or "Reset your PC".
In this scenario, recovery may fail and you are returned back to the main WinRE screen. This issue may occur if the System or Software registry hives have become damaged or corrupted.
To attempt to resolve this issue, follow the steps below. Following these steps should only be used if you are attempting to use the "Refresh your PC" or "Reset your PC" options in Windows RE because your system is in a non-bootable state.
-After Automatic Repair fails to repair your PC, select "Advanced options" and then "Troubleshoot".
-Select "Advanced options" and then select "Command Prompt".
-If prompted, enter in the password for the user name.
-At the Command Prompt, go to the windowssystem32config folder by typing the following command: cd %windir%system32config.
-Rename the System and Software registry hives to System.001 and Software.001 by using the following commands:
ren system system.001
ren software software.001
I did all that but when I tried to rename the Software.001 file the system responds: "The process cannot access the file because it is being used by another process" ...
I tried to create a Ubuntu start up usb key so that i could maybe get in and rename the file but that presented more problems.
"Restart to repair drive errors" keep showing up after reboot !!
it's showing again & again....how to fix this ...
this is windows 8 not windows7
Win 8x64 desktop, two printers (Brother, Canon) connected with USB cables, no network, not part of home group. Both print ok.
I just did an in-place Win 8 repair, followed by adding the updates. Since the first set of updates, there have been eight PrintService errors (215) in Admin Events at startup.
Here are some examples and screenshots:
- Installing printer driver Microsoft enhanced Point and Print compatibility driver failed, error code 0x0, HRESULT 0x80070661.
- Installing printer driver Microsoft enhanced Point and Print compatibility driver failed, error code 0x661, HRESULT 0x80070661.
- Installing printer driver - failed, error code 0xBC8, HRESULT 0x80070BC8.
I currently have Windows 8.1 (core) on my HP laptop that originally came with Windows 8 (core). Recently I have had issues with Windows update and by searching forums I found the only thing I could do was a repair install. At first I was unable to find my product key from the packaging, but by using Belarc Advisor I was able to locate my product key. I downloaded the Windows 8 and 8.1 installations from the M$ website and when I put in my GENUINE key into windows 8 it says "This product key cannot be used to install a retail version of Windows 8".
I have even tried using a GENERIC key in both it keeps giving me "We can't connect right now."
-I my date and time are correct
-I can connect to the internet (multiple locations)
-antivirus, firewall, etc deactivated
-BITS is on and running
-cryptographic on and running
I am unable to do the windows 8.1 iso download trick and cannot find any forum that has this resolved.
Just purchased a new desktop PC with Windows 8, after some video card issues (now resolved), tried to run System File Checker and received:
"Windows Resource Protection found corrupt files but was unable to fix some of them...."
I copied the CBS file to take a look but i'm not really sure which of the multiple errors are causing my issue.
I've got a few:
"[DIRSD OWNER WARNING]"
and
"Failed to create CSI transaction"
"Failed to get CSI Inventory"
But I still cant restore to a chosen Restore Point.
View 4 Replies View RelatedI'm attempting to follow the instructions here, to do a system image of my Dell Windows 8 machine:
Using Windows 8′s “hidden” backup to clone and recover your whole PC | Ars Technica
As I go through the wizard, I arrive at this screen:
I don't have the option to deselect any of these "drives". I proceed with the backup - it chugs along, and then consistently fails here:
"One of the critical volumes is not having enough free space." It doesn't tell me which - but, it's certainly not the OS drive, this is a virgin system.
I have loads of DCOM errors in Windows 8.1
"The server {9BA05972-F6A8-11CF-A442-00A0C90A8F39} did not register with DCOM within the required timeout."
Its filling out my logs a symptom is a sluggish computer.
I'm having a problem with Windows System Image Backup just when I try to do a image backup it will say that it has failed and suggest to do a disk check. I've searched and some users say to use third party backup programs should I run the disk check first or just go with a different backup tool.
View 1 Replies View RelatedAfter updating to 8.1u1, i'm running "dism /online /cleanup-image /restorehealth" and I get the following:
C:WindowsLogsDISM>dism /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
[==========================100.0%==========================]
The restore operation failed. Either the repair source was not found or the comp
onent store cannot be repaired.
Error: 0x800f081f
DISM failed. No operation was performed.
For more information, review the log file.
The DISM log file can be found at C:WindowsLogsDISMdism.log
relevant bits from it seem to be:
Checking System Update Readiness.
(p) CSI Payload Corrupt wow64_microsoft-windows-directui_31bf3856ad364e35_6.3.9600.16438_none_b24310b3f6c19eb0Windows.UI.Xaml.dll
Repair failed: Missing replacement payload.
(p) CSI Payload Corrupt wow64_microsoft-windows-directui_31bf3856ad364e35_6.3.9600.16476_none_b215d06ff6e3dbc6Windows.UI.Xaml.dll
Repair failed: Missing replacement payload.
(p) CSI Payload Corrupt wow64_microsoft-windows-
[code]....
is this something I can repair from my original 8.1 Pro ISO, either as ISO or extracted? The setup event logs mentions 3 errors, so presumably this is the issue.
I am running win 8 pro on a toshiba laptop R700 S1312 64 bit with 8G Ram. I am getting numerous 10016 errors (same error) after every restart.
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{7022A3B3-D004-4F52-AF11-E9E987FEE25F}
and APPID
{ADA41B3C-C6FD-4A08-8CC1-D6EFDE67BE7D}
to the user Don-PCDonald SID (S-1-5-21-2075968696-349866310-2035089026-1001) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
i got this computer since october last year and and I'm noticed that lately had a few errors on Event Viewer! Some of them appears Critical.
View 1 Replies View Relatedin the process of trying to fix another issue (metro games not working on one profile but working on another) I tried to scan and repair any drive errors, it gets to 58-59% and then the machine just reboots Running Windows 8.1 pro 64-bit
View 2 Replies View RelatedWindows 8 Backup has been working fine for 12 months to an external Seagate USB hard drive.I'm now getting a "device not ready" message with error code 0x80070015 and the backup fails within 30 secs of starting. I've checked the drive for errors and there are no problems. I can read /write files to the external drive. There is ample spare space on the external drive to store the backup file. How to investigate and solve this problem.
View 4 Replies View RelatedRunning Windows 8.1 and File History was working OK for my computer, actually on two different computers worked just fine. (I never could get File History to work with Windows 8). Then suddenly this feature just up an quit. Got a little "red" flag in the Action Center. Using the control panel an "setting" up File History my system says that file history is turned off. I never did turn it off, it seems it just up an turned itself off.
But here is the thing, I select my external drive to use for file history and the system says the service can not be started because its disabled or no enabled devices are associated. It "sees" the drive but will not enabled this drive. I have used various windows programs, such as system services..to "turn" on file history. But there seems not to be anything that will fix file history.
It seems all the support is non specific to file history not working. I have yet to see a simple fix to "make" Windows 8.1 to again run file history. I would just like to point and click to backup the computer...but windows is now becoming NON-USER friendly to manage these types of things.
I was running my pc with Windows 8.0 Pro 64 bit and I now getting a screen with the Windows logo and I am now getting a message "Diagnosing PC & Auto repairing disk errors may take several hours".
It has been like that for a couple of hours.
How long I should leave it running or perhaps I should do a fresh reinstall of Windows, I have the Microsoft DVDs?
I have Windows 8 x64, Action Centre scans for drive errors at least once a week, when I run
fsutil dirty query C:
I get a "not dirty" on all my Hard drives, why does Action Centre want to check so often, I cannot find any task in Task Scheduler related to this.
I have had this Samsung laptop for just about a year. It came with windows 8 installed ( I also have a Samsung system recovery disk that I requested) and I have had problems all along. My old laptop had windows vista and I think part of the problem is that my settings somehow were synched with old computer. My old computer had a workgroup, which got synched with new computer. I have tried several times to reset/restore windows 8 to factory settings and at first glance it looks right but a lot of my old settings are still there, especially in internet explorer. Also when I go into advanced repair it says that it cannot be repaired.
I also just found this, but I'm not sure it applies and I don't want to change any settings that I shouldn't be:
Please note that you cannot use Refresh or Reset Your PC features if Windows 8 or 8.1 is installed on a drive with GPT (not MBR) partition table until you force "UEFI only" boot setting in BIOS/EFI. Windows will not detect GPT partition alignment correctly if BIOS booting is enabled.
And this is what shows under my available drives:
available drives
local disk (C (System)
SAMSUNG_REC2
(C (Missing)
My Dell laptop, new this past Christmas and running Win 8, has entered into a repair mode:
"Repairing disk errors. This may take over an hour to complete"
i have recently encounter a problem with my pc.when i was starting my pc it automatically began startup repair & diagnosing your pc screen came.then after some time a message came windows could not repair your pc.details are in D:system32Logfilessrtsrttrail.txt why it is D ? it should be c.
then i restored my computer to one day earlier,then i again ran the automatic repair,it again showed windows could not repair your pc.when i looked into srt.txt i didn't see any error msg.so why it saying that windows could not repair your pc.my specs in my signature & here is my txt report >>
After getting infected and buying an antvirus and cleaned my system i run "sfc /scannow" and it says some protected system fiels are corrupted but its not able to fix them.
View 9 Replies View RelatedRecently I got problems when running SFC or DISM to repair my system. As far as I know it concerns the shortcuts in the folder Administrative Tools, there I changed under Properties the Run option to Maximised Windows and since then SFC and DISM have shown this error that the services are unable to download the proper source files (they admonish a mismatch I cannot correct).
I am running a Windows 8.1 Update 1 system without the Pro version, so I have no access to its exclusive features. I attach the corresponding log files after a run of DISM and SFC for more infos.
I've been trying several things throughout the day and I have had no success in fixing the corrupted files. I have ran "sfc /scannow" several times (even in safe mode). I have also ran "Dism /Online /Cleanup-Image /RestoreHealth" before and after "sfc /scannow" to no avail.
I am running Windows 8.1, I tried booting from my Windows 8 Pro DVD but whenever I tried to run "sfc /scannow /offbootdir=c: /offwindir=d:windows" I would get an error: Windows Resource Protection could not start the Repair service". How I can fix this without doing a clean install or refresh?
CBS.log (txt file)
Windows 8 has been having very strange rendering errors, the desktop still works fine but the rest is all strange blurred with black boxes. What the problem is it just suddenly showed up as that.
System Specs are:
Intel Core i7-3770 CPU @ 3.40GHz (Quad)
16GB RAM
NVIDIA GeForce GTX 670
Windows 8 64-Bit (Downloaded from DreamSpark)
I have this identical problem mentioned here : Scanning and repairing volume (?Volume...) on startup
I think it has something to do with my deleting the 'system reserved' 350mb partition when I reinstalled Windows 8. I don't want it showing in My Computer and when I go into Disk Management and give it a drive letter, this message goes away on boot. But, since I can't merge this very small partition with any other drive, I'm not sure how to not show this drive and not get the scanning message on boot up.