Maintenance :: Error - Windows Could Not Repair Your Computer
Dec 7, 2013
i have recently encounter a problem with my pc.when i was starting my pc it automatically began startup repair & diagnosing your pc screen came.then after some time a message came windows could not repair your pc.details are in D:system32Logfilessrtsrttrail.txt why it is D ? it should be c.
then i restored my computer to one day earlier,then i again ran the automatic repair,it again showed windows could not repair your pc.when i looked into srt.txt i didn't see any error msg.so why it saying that windows could not repair your pc.my specs in my signature & here is my txt report >>
View 7 Replies
ADVERTISEMENT
Sep 14, 2013
Using the sfc command, I found some corrupted windows files but it was unable to repair them... Is there any way I can repair the files without having to reset or refresh my computer and lose everything I installed?
I found something called DISM, but when I used it, it said unable to find source files or something... I found my recover partitions, but they don't have drive letters. Anything I can do?
I have a Toshiba Qosmio X870-BT3G23 laptop
View 4 Replies
View Related
Feb 9, 2014
I upgraded to windows 8.1 when it was available and the first time I turned off my computer after upgrading, it all started and now I'm stuck in this automatic repair loop. To top it all off my mobo: Gigabyte GA-Z68MA-D2H-B3... has now become my main issue.
I have a bootable flash drive loaded with windows 8.1 and a bootable DVD loaded with windows 8.1 but my mobo supports only HDD and CD-rom...
I have no clue what to do, as I can't use a repair disc to repair my computer and I CANNOT Reset my PC, I have way to many files that I need on my HDD.
View 9 Replies
View Related
Oct 22, 2013
It's only been two days since I got windows 8 Pro on my alienware. Recently I force shut down because it was not shutting down. And when I open it today it gives an error message saying that Automatic repair could not fix the problem.
The error code is: "D:WINDOWSSystem32LogfilesSrtSrtTrail.txt
I have tried everything. I have used command prompt and the following commands have also been tried.
bootrec/fixMMR
bootrec/fixboot
bootrec/rebuildbcd
chkdsk/r c:
chkdsk/r d:
Nothing has worked so far. I have tried everything except a fresh installation of windows. I have already taken a backup previously. I am a little apprehensive about formatting again.
View 3 Replies
View Related
Jan 2, 2014
my Gateway SX 2370 shutted down during system restore and now my computer keeps running automatic repair. And I getting tired of this continuous operation....
View 1 Replies
View Related
Sep 15, 2014
I have had this Samsung laptop for just about a year. It came with windows 8 installed ( I also have a Samsung system recovery disk that I requested) and I have had problems all along. My old laptop had windows vista and I think part of the problem is that my settings somehow were synched with old computer. My old computer had a workgroup, which got synched with new computer. I have tried several times to reset/restore windows 8 to factory settings and at first glance it looks right but a lot of my old settings are still there, especially in internet explorer. Also when I go into advanced repair it says that it cannot be repaired.
I also just found this, but I'm not sure it applies and I don't want to change any settings that I shouldn't be:
Please note that you cannot use Refresh or Reset Your PC features if Windows 8 or 8.1 is installed on a drive with GPT (not MBR) partition table until you force "UEFI only" boot setting in BIOS/EFI. Windows will not detect GPT partition alignment correctly if BIOS booting is enabled.
And this is what shows under my available drives:
available drives
local disk (C (System)
SAMSUNG_REC2
(C (Missing)
View 3 Replies
View Related
Apr 15, 2014
I've been trying several things throughout the day and I have had no success in fixing the corrupted files. I have ran "sfc /scannow" several times (even in safe mode). I have also ran "Dism /Online /Cleanup-Image /RestoreHealth" before and after "sfc /scannow" to no avail.
I am running Windows 8.1, I tried booting from my Windows 8 Pro DVD but whenever I tried to run "sfc /scannow /offbootdir=c: /offwindir=d:windows" I would get an error: Windows Resource Protection could not start the Repair service". How I can fix this without doing a clean install or refresh?
CBS.log (txt file)
View 9 Replies
View Related
Jan 5, 2014
I have this identical problem mentioned here : Scanning and repairing volume (?Volume...) on startup
I think it has something to do with my deleting the 'system reserved' 350mb partition when I reinstalled Windows 8. I don't want it showing in My Computer and when I go into Disk Management and give it a drive letter, this message goes away on boot. But, since I can't merge this very small partition with any other drive, I'm not sure how to not show this drive and not get the scanning message on boot up.
View 9 Replies
View Related
Oct 28, 2013
I have a HP pavilion DV7 laptop which originally came with Windows 7 installed.
Recently I upgraded to Windows 8 and then to 8.1 but now want to ensure I have the necessary recovery capabilities in place.
I have taken a full backup when the system was at Windows 8.
Can I create a new set of recovery disks (HP cyberlink won't let me because I've already got a set made when the system was running W7)?
What should I do with the recovery partition (which I assume has a W7 image)?
Or is it sufficient to rely on a USB recovery drive and assume Windows 8 has the means to repair itself.
View 3 Replies
View Related
Nov 24, 2013
My acer aspire laptop running on windows 8 updated to 8.1 .As now got a blank screen and says Preparing automatic repair and does nothing ...
View 12 Replies
View Related
Feb 7, 2014
Since upgrading to windows 8/8.1 x64 i have twice had this situation when during boot up windows tries automatic repair & fails , every time i restart same repair fail happens , its stuck in this cycle , neither "Refresh" or "Reset" option works , . I have to do a fresh format & install , loose all my files stored in the OS partition , I even tried to recover the files using linux boot cd but the folders were inaccessible/corrupted .
I tried every solution i could find to make it boot including Unable to refresh or reset PC after Automatic Repair fails in Windows 8 but nothing worked .
This has happened twice in the one year since i have been using Win 8 , Is there any way to avoid this from happening i future ?
View 9 Replies
View Related
May 18, 2014
A couple days ago, I was casually playing Warframe. Tried to alt+tab out to check an IM and my screen went black. Not sure what happened as I could still hear the mouseover sounds as though Warframe were still active. Fiddled around for a few minutes and couldn't get Task Manager to come up, so I decided to just hold the power button on my laptop until it shut down. No harm done, right?
When I booted back up, Windows greeted me with a "Diagnosing Your PC" message under the normal Toshiba boot logo. After it hung there for a few seconds, it moved on to the "Attempting Repairs" screen. Didn't take long for it to decide it wasn't too happy with me for suddenly shutting it down.
Since then, I've been stuck in an auto repair loop. So far I've googled everything I could think of, but it seems my efforts were in vain. Tried putting Hiren's on a thumbdrive and booting from there, and for some reason, Windows just boots right back into the auto repair screen. I've even wiped my 1TB external and put the recovery image from my work PC on there. That didn't work either. I've gone through every thread google's given me and I feel like I'm banging my head against the wall.
I should probably note that formatting is not an option for me. I'd try installing Ubuntu on my external, but since the recovery won't even boot, I feel like that'd be in vain.
View 1 Replies
View Related
Jul 19, 2013
in my previous mentioned as c as partition active and then made its as inactive
after that i am getting error code 0x000000f when troubleshooting the systems. how to fix that problem without re installing the windows again.
View 2 Replies
View Related
Sep 15, 2014
Acer Aspire V5 is the PC I am using. I turn it on, the boot fails and the pc restarts. Then begins an automatic repair, which crashes and the PC turns off. It is a loop I cannot get out of. I don't have a Windows 8 Disc or anything like that.
View 2 Replies
View Related
Feb 10, 2013
I have Windows 8 64 bit Pro Edition working fine using UEFI boot from a SSD disk. I've twice created a system repair disk on DVD but when I use boot override in the BIOS to boot from the DVD, I get the message "Non-system disk....
View 9 Replies
View Related
Apr 28, 2014
My Dell laptop, new this past Christmas and running Win 8, has entered into a repair mode:
"Repairing disk errors. This may take over an hour to complete"
View 9 Replies
View Related
May 25, 2014
I have run sfc /scannow on my system to find if there were any bad files. It comes up and says that it had found bad files and could not repair all of them. Ive run it three or four times in a row and always get the same result.
how I can get this to go all the way through?
View 2 Replies
View Related
May 16, 2013
After getting infected and buying an antvirus and cleaned my system i run "sfc /scannow" and it says some protected system fiels are corrupted but its not able to fix them.
View 9 Replies
View Related
Jun 26, 2014
Recently I got problems when running SFC or DISM to repair my system. As far as I know it concerns the shortcuts in the folder Administrative Tools, there I changed under Properties the Run option to Maximised Windows and since then SFC and DISM have shown this error that the services are unable to download the proper source files (they admonish a mismatch I cannot correct).
I am running a Windows 8.1 Update 1 system without the Pro version, so I have no access to its exclusive features. I attach the corresponding log files after a run of DISM and SFC for more infos.
View 2 Replies
View Related
Apr 24, 2014
I was playing WOW the other night on my month old PC and all of a sudden I got a full red screen. I restarted the comp and this auto repair screen popped up and it freezes and just same thing over and over. the bottom of the screen is cut off and the only other window i can get into is the bios setup utility window. Cant get into any kind of safe mode nothing.
my computer is an Gateway SX2370-UR12
View 1 Replies
View Related
Sep 15, 2014
I ran SFC and it complained that some corrupt files could not be repaired.
Here's the relevant part of the log:
Code:
2014-09-17 00:06:45, Info
CSI 00000520 [SR] Verifying 100 (0x0000000000000064) components2014-09-17 00:06:45, Info
CSI 00000521 [SR] Beginning Verify and Repair transaction2014-09-17 00:06:46, Info
CSI 00000522 Hashes for file member
[Code] .......
View 2 Replies
View Related
May 12, 2014
My Toshiba laptop/Windows 8.1 installed a VLC Media player & Malware bytes today. I was instructed to Restart as 'drivers not working properly' & since then have been on the Automatic Repair loop. It says it cannot fix it - log file: C:WINDOWSSystem32LogfilesSrtSrtTrail.txt, & I tried a few System Restore points but that just says -
System Restore could not access a file. This is probably because an anti-virus program is running on the computer . Temporarily disable your antivirus program and retry System Restore. You can try System Restore again If you continue to see this error, you can try an advanced recovery method.
Thing is I can't get into Windows or my laptop to disable the antivirus program.
I don't have any CD or DVD & no product key as the disc has been misplaced.
View 3 Replies
View Related
Feb 15, 2014
I have a Toshiba Laptop Satellite L875D-S7332 Part No. PSKFQU-008003 With Windows 8 x64 Preinstalled. I created a Startup Repair Disk with a DVD. My problem is i cannot boot from this DVD. I changed the Bios to boot from DVD but it still doesn't work!
View 1 Replies
View Related
Apr 19, 2013
Having a problem with the Regular Maintenance waking the computer (Windows 8 on a Lenovo Q-190) to do its scheduled task as it's supposed to do. Here are the symptoms:
1. If I change the time for Scheduled Maintenance in the Action Center (Change Maintenance Settings), it WILL be reflected properly in the Properties of the Regular Maintenance Task in Task Scheduler.
2. However, if I check the box for "Allow scheduled maintenance to wake up my computer at the scheduled time" in the Action Center (Change Maintenance Settings), it WILL NOT reflect in the Properties of the Regular Maintenance Task in Task Schedular. Specially, I check the box to wake up my computer in the Action Center Maintenance Settings, but the corresponding checkmark is NOT reflected ("Wake the computer to run this task"), in the properties of the actual task in Task Scheduler.
3. I then put the checkmark directly in the Regular Maintenance Task itself ("Wake the computer to run this task"). However, at some point in the future, (not right away; I close and then reopen the task to make sure that it 'sticks'), the checkmark "disappears. Then, the task does not run at night while the computer is asleep, but runs in the morning when I wake the computer for regular use. At that point, the checkmark in the task is gone.
View 6 Replies
View Related
Apr 19, 2013
My Windows 8 computer keeps telling me that there was an unexpected error when ever I hibernate my computer and restart it, but if i shut it down and restart i don't get the error.
Here's the dump file : [URL] .......
View 9 Replies
View Related
Nov 29, 2013
Computer: HP Pavilion DM4 3070-se (Beats Edition)
OS: Windows 8
It would not boot up, and when I started it the BIOS showed a '3F0 hard drive not exist' error. I left it until this morning, and tried again. Everything booted up and it reached the Windows 8 login screen -- I have automatic login enabled, but the screen freezes (spinner indicator stops suddenly) and the screen goes black. It restarts again, and sometimes I get the Windows 8 repair screen, sometimes I get the 3F0 error again.
The inconsistency makes me think that something is screwed up hardware-wise, but I'm not totally sure. Apparently, from reading online, the problem could be the HDD (I don't think this is the case) or a poor cable connection (most likely), or a software problem.
Because I don't have recovery media for Windows 8 (I installed it on a USB drive I don't have with me) I can't try a system refresh or restore, but I'd rather avoid those if at all possible.
Do you all think that a good option might be to take it to a hardware repair place and have them check the cables for errors?
View 8 Replies
View Related
Sep 28, 2013
While trying to add folders to the Search Index, I was informed the Windows Search process was not started. When I go to the Services Console and attempt to manually start, I am given the error:
"Windows could not start the Windows Search service on Local Computer.
Error 2: The system cannot find the file specified."
So I opened an command prompt with administrative level access to run sfc and received the following error after it was complete:
"Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios."
The CBS.log file is too large to upload to here or paste into pastebin, so here is a dropbox upload of it:
What other way, aside from a repair install, do I have to fix my missing files and services?
Specs:
Processor: Intel i5 2500k @ 3.3GHz
OS Name: Microsoft Windows 8.1 Preview with Media Center
Motherboard: Z68A-D3H-83
Installed Physical Memory: 8.00GB
View 8 Replies
View Related
May 10, 2013
Ok, So, I started up my laptop this morning and the screen was all wonky, It was light blue and there were swiggly white bits, I waited a bit and then restarted it.
The Auto Repair started up when the computer started back up so I left it alone for a bit
"Automatic Repair couldn't repair your PC"
I was like Ok, I checked the logfiles "Boot critical file c:/ci.dll is corrupt"
It won't let me refresh or restore my computer.
Forgot to say, If I restart it just loops back to the auto repair.
View 2 Replies
View Related
Jan 2, 2013
the last few days a came upon my computer and it was shut down when i restarted the computer
it said the computer encountered an error an shut down
sending info to Microsoft
1- how can i find out what caused the error
2- has others had similar this problem
View 2 Replies
View Related
Nov 10, 2013
I have been getting an error message when the computer shuts down, how to fix the problem? Could this be related to sleep issues the computer is having?
View 3 Replies
View Related
Jan 21, 2013
After two refresh and one clean install of Windows 8 within a two-week period, my computer freezes while I'm running CCleaner. It always stops at the same file:
CUserAppDataLocalTemp\_ME149482PyWinTypes26.dll
First few minutes, I can still use my computer, but after that, I cannot print, cannot open Task Manager, cannot shut down the computer. After numerous attempts, I'm able to close CCleaner, but my computer remains frozen.
View 3 Replies
View Related
