Maintenance :: How To Fix Kernel-power 41 Event
Jul 13, 2013
I got my new ASUS laptop on Mother's Day this year, and the first event happened a week later. I've had this same event happen 6 times since then as shown by the attached image.
I'm comfortable with computers but am not an IT person so I'm not comfortable performing tasks within my system unless I know what the heck I'm doing or why.
W7 forum said overclocking (it's not), heat (this last time it had been in sleep mode while I was out and within moments of waking it up it crashed), sudden loss of power (it's plugged in AND has 100% battery left) and so on. In other words, it doesn't appear to be related to any of those things. It just randomly happens.
1) why this keeps happening and
2) how to fix it?
I've been very disappointed in my new laptop since getting it; I've NEVER had such issues with a new computer before..and I thoroughly dislike Windows 8 and I doubt I'm alone in that view.
View 5 Replies
ADVERTISEMENT
May 26, 2014
Recently I noticed a game that I had been playing had started to stutter and slowdown more than usual, the performance issues were to be expected as the games engine is notorious for being poorly optimized, however these occurrences were fairly rare in comparison to the issues i'm experiencing now.
It seems for the last two days the performance of said game had been dismal, where i'd get a mostly consistent frame-rate before, I now only have a stutter riddled mess.
Looking through the Event Log I noticed a entry shown as; Kernel-Processor-Power Event ID 37, the text below it shows this; 'The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 7 seconds since the last report' the entry had been generated at '7:56pm' of today, which I found odd, as I believe that's when I started my game.
This had not been the only instance it seems, there were some entries from a few weeks back that show the same thing, however they were few and far in between. It seem I have 3 entries, all from today (12:00am, 3:56pm, 7:56pm) all warnings.
View 8 Replies
View Related
Mar 15, 2013
I have had three of these shutdowns randomly occur over the last 2 days. I have no warning on when they will occur.
The computer is only 5 weeks old, so i wouldn't except an overheat issue personally. I can think of no new software i have installed since this has started. So far, it has always happened while playing a game (Diablo 3) but that is likely just coincidental, as that is what i do most on this computer.
MSI GT70 0ND computer
GTX 675MX vid
16GB DDR3
i7 3630QM
View 9 Replies
View Related
Sep 15, 2014
I bought my laptop about 3 months ago, i got BSOD relating event 41 task 63 kernel power many times and got twice BSOD today.
View 1 Replies
View Related
Aug 14, 2014
Today, I started up my PC and after browsing on it for an hour I noticed a LiveKernelEvent hardware error in the Performance and Reliability graph. Looking at the time of the error, it appears that it occurred seconds after booting up my PC. The weird thing is that the PC didn't act strange or freeze up. Also, googling this error shows that it's mainly associated with BSOD's while my PC didn't give any.
I couldn't find any errors about it in the logs but there is only an information log about it (Dutch):
Foutbucket , type 0
Naam van gebeurtenis: LiveKernelEvent (name of event)
Antwoord: Niet beschikbaar
Id van CAB-bestand: 0
[Code] ....
Note that at Parameter 1 a code named "ab" is given which I couldn't find at all on the internet (usually P1 codes are numbers). Also, I could only find 2 files that were given by the error log (see attachment). There are no minidumps in C:/windows while it is enabled in the options to register any.
What the cause of this error by looking the files. I just recently formatted my PC and installed all latest updates.
Specs:
Windows 8.1 Pro 64 bit with Media Centre
i5-3570K (stock)
GTX 660Ti
8GB RAM
View 5 Replies
View Related
May 9, 2014
"The maximum file size for session "Circular Kernel Context Logger" has been reached. As a result, events might be lost (not logged) to file "C:Windowssystem32WDILogFilesBootCKCL.etl". The maximum files size is currently set to 104857600 bytes."
"Session "Circular Kernel Context Logger" stopped due to the following error: 0xC0000188"
These two messages went away for awhile and now the're are back. How to make them go away? I don't think I did anything with tracing to make this happen?! I know I should make a pledge to never look at the Event Log but...every once in awhile I uncover something that can be fixed. I have Googled the messages but don't seem to be able to find any real solution. I tried deleting the .etl file but it fills up on the next boot.
View 1 Replies
View Related
Nov 2, 2013
I recently discovered this event error dated 10/18/2013 which is about the time that I upgraded the BIOS and attempted to enable Secure Boot. Enabling Secure Boot worked as far as Windows 8.1 is concerned - eliminated watermark and Secure Boot event errors but the system boot process displayed NO VIDEO during POST and there were 6 beeps and power light flashed 6 times. HP Boot error codes indicates a problem with the video card (AMD Radeon HD 7500). If Secure Boot is turned off, everything works fine. I would like to understand why this event error was reported and how to correct the issue. Is the video hardware not compatible with UEFI and Secure Boot? Did keys get lost that allows Secure Boot to validate this hardware get removed? Although I am happy without Secure Boot, I would like the decision to use Secure Boot to be mine and not because something isn't working correctly.
View 5 Replies
View Related
Sep 15, 2014
keep getting it logged as an error. I have gone into Adjust Date and TimeInternet Timeand it is set to automatically synchronize with time.windows.com and on a scheduled basis. When I try to update or change the setting I get an error message that an error occurred while windows was synchronizing. I have tried to do a system file check but get the error message that Windows Resource Protection could not perform the requested service or start the Repair Service. I have checked that Windows Modules Installer is set to manual and so I don't know how else I can repair this error 131.
View 6 Replies
View Related
Jan 20, 2013
I installed clean Windows 8. I checked the event viewer to see if everything is OK. But it has 4 critical error and they were all Kernel Power Error. I noticed these Kernel Power Errors are caused by when I restart my PC. Example is when I installed Photoshop, I restarted and I checked the Event Viewer Log. There was an event Kernel error created.
but here is where it gets complicated. When I boot to desktop after restarting my PC, it doesn't say my computer suffered from a serious error. I have to check it manually by going to the Event Viewer Logs. If I don't check the Event Viewer Log, I won't know.
There has also been times where my PC won't boot to Windows 8. I goes past BIOS and Windows boot screen, but it hangs there. It simply crashes.
I don't overclock my PC. My PC temps are always low old IDLE and always within the max temp under full load.I have installed and updated ALL drivers and BIOS. I thought this might be driver issue but I realized this happened when I installed it clean and booted up for the first time.
This does not happen in Windows 7. Only in Windows 8.
I ran Prime95 for 12 hours -- no error
I ran Intel Burn Test for 9 hours -- no error
I ran Memtest for 12 hours -- no error
My PC specs:
CPU: AMD FX 8350 4GHZ
GPU: AMD Radeon HD 6870
RAM: 8GB Corsair Dual Channel
Motherboard: ASUS M5A97 R2.0
PSU: XFX 450W
Samsung 830 128GB SSD
500GB Western Digital HDD
View 2 Replies
View Related
Aug 20, 2014
Lately just after I updated my Windows 8.1 all of the sudden my PC started shutting down for no reason and I had to restart it. It often occurs during the morning hours, but it also occurs during the evening hours, too. It's a Kernel Power error with Event ID 41, Version 3, Level 1, Task 63.
Here's the zip file and text document attachments I made which contains more information about what's going on with my PC.
SHERRY-PC-Wed_08_20_2014_100441_60.zip
File Type: txt Critical Error Details.txt
View 3 Replies
View Related
Nov 19, 2012
For a couple of days a strange thing happens to me after a while or Tuning 'that the computer is turned on I get a blue screen of death, but this does not happen regularly, however I went to the event log and in detail in XML vegono reported these details:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
[Code] .......
View 2 Replies
View Related
Sep 15, 2014
About 2 months back i had a new pc build. Since then, either 2 things would happen. My computer screen will complete freeze, with a buzzing sound and i would have to manually restart or i would get a BDOS with a buzzing sound and the computer auto restarts. These crashes are completely random, sometimes it would happen couple times a day, sometimes i can go a week without one. i also notice about almost all of these happens when im gaming. and everytime i look at the event log, its always the same Kernel-Power 41.
This is the computer spec
OS: Windows 8
PSU: EVGA SuperNOVA 750
Graphics Card: ASUS GTX780-DC2OC-3GD5
CPU: Intel Core i7-4790K 4.0GHz
Mother Board: ASUS MAXIMUS VII HERO
RAM: G.SKILL Trident X Series 8GB (2 x 4GB) DDR3 2400 (PC3 19200)
SSD: Kingston HyperX 3K 240GB
This is what i got using WinDbg
Bugcheck Analysis:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
[Code] ......
View 9 Replies
View Related
Mar 8, 2013
It has been a long, long time since I have wanted to clear the event log and that was under Windows 7. I would like to clear the log under Windows 8 but can find no way to do it. It seems like I remember using 'Clear Log' under Actions but that doesn't seem to be there in Windows 8.
View 5 Replies
View Related
Oct 8, 2013
This is in my event log like 10932098434 times. The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{C2F03A33-21F5-47FA-B4BB-156362A2F239}
and APPID
{316CDED5-E4AE-4B15-9113-7055D84DCC97}
to the user CorsairAdam SID (S-1-5-21-728937790-313184532-559953268-1001) from address LocalHost (Using LRPC) running in the application container Microsoft.BingWeather_3.0.1.174_x64__8wekyb3d8bbwe SID (S-1-15-2-2040986369-264322980-3882385089-1970153872-3662121739-3363227934-2464603330).
This security permission can be modified using the Component Services administrative tool.
View 5 Replies
View Related
Dec 7, 2013
i am having a lot if event viewers logs with errors and my laptop running very slow; how to remove all those errors and how to clear event viewers log.
View 2 Replies
View Related
May 26, 2014
How do you clear event viewer? Do windows, do it for you? I have recurring 910 and SENT something to do with taskhostex.exe under performance and slower than usual computer. The only thing I have done is install IObit driver program after MS win update screwed up AMD 7420G graphics driver and caused a crash. Should I uninstall IObit, and see if that fixes it? The drivers installed by IObit will still be there to load? IObit fixed the crash
View 1 Replies
View Related
Nov 9, 2013
My 12 month old Win 8 64 bit self-build pc has been very stable and as yet, no BSODs.
I want to update /upgrade to Win 8.1 (I have also acquired the ISO) and have managed to execute a File History to my Samsung USB3 1TB ext HDD as a safeguard in preparation. I would prefer to update via the Store to avoid having to reinstall all my programmes
However the File History event log is indicating yellow warning signs and Code 204 errors. Detail states: "Unusual condition was encountered during finalisation of back up cycle for configuration". I am concerned therefore that this might prevent me properly doing a File History recovery should I need to. Researching elsewhere indicates that 204 errors result from corrupted system files.
I have checked the Ext HDD which has the File History folder (12.5 GB) and all my files seem to have been copied OK.
View 5 Replies
View Related
Feb 25, 2014
i got this computer since october last year and and I'm noticed that lately had a few errors on Event Viewer! Some of them appears Critical​.
View 1 Replies
View Related
Nov 26, 2013
Has the "Event 513 error" issue been solved in the latest version of Macrium Reflect (Free)? This version: 5.2.6433 (11 November 2013)
Event 513 errors in Windows 8.1
Possible Macrium Issue?
In any case, is it currently safe to use Macrium Reflect (latest free version), from the point of view of operating system integrity (with Windows 8.1)?I'm a little scared that this "Event 513 error" issue could corrupt Windows 8.1 in some way.
View 1 Replies
View Related
Feb 7, 2013
I've been getting this single warning since the very first boot after a clean install of Windows 8 Pro. This is the only warning I get along with 19 informationals that are easy to understand and logical.
Event ID 1530, User Profiles Services
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL - 1 user registry handles leaked from RegistryUserS-1-5-21-4208045085-1828888239-1443801484-1001:
Process 1028 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-
1-5-21-4208045085-1828888239-1443801484-1001SoftwareMicrosoftWindowsCurrentVersionUninstall
View 6 Replies
View Related
Sep 5, 2013
So, it all started after i had my nvidia drivers error "Nvidia windows kernel mode driver error". After this error windows started being really annoying and laggy. Usually it lags most when i turn on computer, it takes a lot of time to load files, and strange thing happens after i turn it on. Just a few seconds after windows loads pictograms on dekstop windows strangly loads them again... I checked my disk usage, it goes to 100% sometimes and when its at 100% windows getting laggy. Usually reinstalling windows works, but I cant reinstall it atm, I got a lot of important stuff in it (and I made one disk). I am using windows 8.
View 1 Replies
View Related
Jul 23, 2014
The icons on the start menu and login screen are missing. how do i solve this?
View 9 Replies
View Related
Jan 23, 2013
I recently upgraded to Windows 8 (64-bit) and noticed I don't have power options available. I own an HP Pavilion DV7, usually when I leave the laptop to do something over night, I go into "Choose what closing the lid does" and I get the error saying my power plan info is not available. Whenever I try to create a powerplan it tells me the same thing, but when I hit next, it tells me it can't find the file specified. I have no power options at the moment. I tried resetting to defaults using cmd, rebooted, and the only power option I had (Razer Gamebooster) was gone, and had nothing after.
View 7 Replies
View Related
Sep 15, 2014
I'm looking for a way to automatically shutdown PC at midnight and turn it back on at 16h during work days (while I'm at work). Is there a way to do that in the built-in scheduler or is there an app for that?
View 4 Replies
View Related
May 24, 2013
The power options on my computer have stopped working. The screen does not dim or turn off automatically and the computer does not sleep automatically.
I bought my HP Pavilion 20 all in one desktop two weeks ago and then power options stopped working a week ago everything else seems OK. I looked in the console and "balance" is checked, going further, all the times are set (display dimmed 5 mins, turn off display 10 mins, put computer to sleep 30 mins). A day or so before this happened I replaced the standard (rather cheap) wired keyboard and mouse with a Logitech k360 Keyboard and m326 mouse (both wireless).
I can put the computer to sleep using the keyboards sleep button. I also temporarily changed the "Put Computer to Sleep" section in Power Options console to "never" when "Windows Photo Gallery" needed to update the face recondition on my photos transferred from my old computer (it took over 24 hours). After "Windows Photo Gallery" had finished I changed it back to 30 mins and since then no power options.
View 4 Replies
View Related
May 17, 2014
Have power options set to never sleep but it still does after about 20 minutes and I need to re-enter password to get going again.
View 6 Replies
View Related
Sep 15, 2014
I build out tons of machines of all makes and models for demo scenarios. One of the things that is the same on all devices is our custom power settings.
Is there a way to copy the power settings and apply them to any new laptop we build out?
Example:
Laptop 1: Power settings are set to never go to sleep, not require passwords on wake up, brightness set to max, disable adaptive brightness.
I am hoping to be able to run a batch file or something to accomplish this on every machine I build out.
View 1 Replies
View Related
May 27, 2014
I have Asus N550LF, always on boot or when i unplug the charger power management set to high performance which is causing the battery life to decrease ( wear level 7%), since i found out H.P. causes this i always set it to Balanced but its annoying to do it every time i boot up, any way to set it to default?
View 2 Replies
View Related
Sep 15, 2014
Every time I start and restart my Windows 8.1 laptop it goes automatic in Power Save mode. How do I turn this off and late it every moment in High Performance?
View 4 Replies
View Related
Sep 15, 2014
Is there any way to remove old not needed advanced entries in the windows 8.1 power plan settings. Here is a picture of what I'm talking about. Highlighted in red is what i don't need anymore any way to remove it?.
View 8 Replies
View Related
Jun 14, 2014
For the longest while I've had issues with my Windows 8.1 ignoring my selection of power options. By this I mean by CPU will stay clocked at 1.4GHz when it should be hitting around 2.3GHz when I set to high performance from power saving mode.
In the past it's cleared up by itself or through reboots but I'm thoroughly pissed off and I want it fixed.
View 7 Replies
View Related