I have a problem with my second ram slot, does anyone know how to properly adjust the voltage to my ram slots through the BIOS of a Gigabyte P55A-UD3P Motherboard.
Also if anyone can tell me the desired voltage for each RAM slot.
I have xps m2010, it uses notebook graphic mobility radeon x1800. the card is so old that many of the recent GPU software can't seem to read it properly. GPUz was able to see core/memory clock and memory but unable to see temperature or voltage.
GPU meter/PC meter just fails to see it at all, not supported it seems, same goes for GPU monitor or GPU observer, cant see it.
however temperature shows up in Hwinfo but no voltage either. I was able to download ATItool and able to change it's core/memory clock speed but it doesn't have voltage control.
what I want to do is for it to run at a lower VID/clock when idle, something like CPU speedstep or nVidia powermizer. when idle, lower voltage, temp and clock speed, when used, back to highest etc.
I have been reading for days and don't understand this. When I get a system built using all SATA drives...is the best setting in the bios AHCI?
I know the RAID setting requires drivers and IDE does not but how about AHCI?
Should I even use this setting? Does it require drivers or does Windows 7 have "generic" ones?
I just installed a new mobo, cpu, and ram. After I finished installing all the peripherals I booted up my system. Everything is going great until i get to the windows 7 loading screen. As soon as the window's logo appears it BSODs and restarts. I have windows 7 x64. I used another HD with Vista x32 and it worked perfectly. Another potential problem is my USB mouse isn't functioning but i suppose that is because I don't have the drivers or something similar to that.
mobo - gigabyte GA-P55-UD3 Rev. 2.0
cpu - Intel i7-870
RAM - Kingston hyperx ddr3 1600 2 x 4gb
ati-bonefish motherboard windows 7 32bit
View 3 Replies View Relatedthis message has started showing up, and subsequently, various websites just freeze and I have to X out of the page
View 3 Replies View RelatedI had 4gb or ram but then I added another 4 to make 8gb or ram, but I am getting bsod. How do I change the voltage to match the ram?
View 5 Replies View Relatedi've just installed 8GB OCZ Gold DDR2 RAM on my Asus P5Q Pro Turbo board, the timings on the RAM state PC8500 1066Mhz 5-5-6@2.10v. I have checked in the BIOS and the frequency was set to auto and the voltage was also set to auto, I have set these to 1066 and 2.10 respectively but when I checked with CPU-Z it reports frequency 534.9 and voltage 1.80. I made sure I saved the changes before i exited the bios
View 4 Replies View Relatedhow to fix a computer that say system battery voltage low....and it shut down...
View 3 Replies View Relatedwhy I can't increase the CPU voltage beyond 1.346000 V on my MSI 990xa-gd55 motherboard? I've tinkered with practically everything in the BIOS
View 9 Replies View RelatedAs the title already says, I'm having problems with my usb slots not working sometimes for my mouse and keyboard, they either stop working for a few seconds and I get the windows "connect/disconnect" sound or they just stop working which can be fixed by repositioning the 2 usb's into a different set of slots. This solution however only works for a while until the same problem occurs again and I have to reboot to get them working again, this problem nearly only occurs with the rear usb slots, it does, however, somethimes affect my front 2 slots where I have a headset plugged in, this is noticeable immediately as any sound heard from the headset is wrong (can't really explain how it changes ). I have already tried uninstalling/updating drivers and turning on legacy support in the BIOS but to no avail.
View 3 Replies View RelatedHow to make mbr slots available?
View 3 Replies View RelatedI'm looking to upgrade my desktop to be usb 3.0 capable. The only option I can see since my motherboard doesn't have any is PCI and PCI-e card adapters. Problem is, I have none available. I expected there to be a version where the usb 3.0 port would connect to a sata port. I don't see any. There are also plenty of USB3.0 etc front bays, but unfortunately these products don't give much info on how these are connected internally.
View 8 Replies View RelatedWindows 7 Not Detecting PCI Slots after Format - Previous thread about this problem, Bare Foot Kid suggested I made a new thread in here and linked you guys back to it. I'm having major problems with my PC at the moment. It was all working well but it was due for a clean and I had all the files I wanted off the Harddrive so I put in the Windows 7 CD and rebooted the PC. I changed the BIOS so the CD/DVD drive was 1st priority and let it reboot itself. The installation went smooth. I initially had 2 partitions on the Harddrive, I deleted them both and created 2 new partitions and installed Windows onto the smaller one. Everything seemed fine but when I got into Windows I noticed I couldn't set my resolution to the normal dimensions like I always could after a format. I checked Device Manager and under the Display Adapters and Sound Controllers menus there is no sign of my HD4890 and Xtreme Music. I know the HD4890 is working at least because I have the monitor plugged into it and it works but Windows doesn't detect the card at all and is running off the onboard because it's the only choice it has.
View 8 Replies View RelatedI'm having major problems with my PC at the moment. It was all working well but it was due for a clean and I had all the files I wanted off the Harddrive so I put in the Windows 7 CD and rebooted the PC.I changed the BIOS so the CD/DVD drive was 1st priority and let it reboot itself. The installation went smooth. I initially had 2 partitions on the Harddrive, I deleted them both and created 2 new partitions and installed Windows onto the smaller one. Everything seemed fine but when I got into Windows I noticed I couldn't set my resolution to the normal dimensions like I always could after a format. I checked Device Manager and under the Display Adapters and Sound Controllers menus there is no sign of my HD4890 and Xtreme Music. I know the HD4890 is working at least because I have the monitor plugged into it and it works but Windows doesn't detect the card at all and is running off the onboard because it's the only choice it has.I tried installing drivers for the motherboard, graphics card and sound card but it didn't fix the problem. I also flashed my BIOS with the latest BIOS update from the Gigabyte website. I've tried formatting again 3 times which made no difference. I've tried removing both cards from the PC and booting it up, turning it off, replacing the cards and booting it up, but Windows still didn't detect either of them.
View 4 Replies View RelatedI've built Windows 7 32 bit on my Vaio VGN-AR71S, but the memory card slots are missing. I've tried installing fixes but they've not workedAlso the BD/DVD eject button beside the keyboard doesn't work - can this be enabled in Windows 7?
View 6 Replies View RelatedHiding Media card slots in Explorer, any body know how its done?,obviously I want them to come on when media is inserted but I want them hidden when their empty.
View 2 Replies View RelatedI have USB 3.0 slots in my Dell Laptop. My desktop has a couple of these, too, but also a number that are USB 2.0. The Hauppauge HD-DVR and Media Center remote which work fine when used with USB 2.0 slots don't work in USB 3.0 slots.
View 1 Replies View RelatedI recently bought a USB 3 flash drive and was curious why I was only getting 32mb/sec read and about 20mb/sec write speed. Could it be that my usb 3 slots are not really usb 3?
View 7 Replies View RelatedI did the Asus live update, soon as i hit ok, one of my usb slots stopped working but the other is working just fine. It makes the noise when you plug in something, but wont work.
View 2 Replies View Related915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies View RelatedI cannot change the fonts in these two following windows. I would like to change all these fonts into Arial, but I cannot find a way to change them.I try to adjust them in personalization window coloradvanced appearance settings Active title bar or Menu. This method was practicable in browser menu, PDF files menu, etc. But it only failed to adjust these two windows...what a marvelous.BTW, since the fonts in this window are odd so that some contents in this window cannot be shown.
View 4 Replies View RelatedI have a HP Deskjet 1000 (J110 series) I can't change the printer settings, esp to draft, better quality etc..
View 1 Replies View Relatedive just recently installed Windows 7 Build 7100 on my eMachines E525 laptop, & i can't adjust the screen brightness with the 'fn' key anymore.
View 9 Replies View RelatedBut in the last couple months, once in a blue moon I couldn't change my screen brightness, and now in the last couple days it's gotten a whole lot worse. Usually, I can't change brightness either via my 'fn -/+' hotkeys or via the actual brightness slider in the power panel. A full reboot or simple hibernation then reboot both let me change brightness again. But the last couple days, restarting the computer just puts the brightness on either fully dimmed or fully bright, and I still can't change it.
This is an HP G60 laptop, and I've had windows seven for a year on it. Like I said above it only started a couple months ago then got worse this week, and what I've found on google so far was all for newly-updated-to-seven issues. My drivers all seem to be up to date according to the windows update driver function.
i am not able to adjust wallpaper on my pc monitor.i want full wallpaper on my screen.
View 2 Replies View RelatedI want to connect my laptop computer to my Sony flat screen TV but it gives me a report. Unsupported signal adjust your PC output?
View 2 Replies View RelatedI need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies View RelatedI have recently installed windows 7 and one of my program (Autocad) has menus that used to stretch from the top of the screen to near the bottom of the screen. Now in Windows 7 the spacing between each line on the menu has increased causing the menus to be much taller, and scroll off the screen.Is there any way to adjust this line spacing in menu items in Windows 7?
View 1 Replies View RelatedHow can I adjust the font size in History its about about point 4Win 7
View 1 Replies View Relatedwell i downloaded Windows 7 and now everything is HUGE. It says the size of my monitor does not meet the requirements to run over 600 resolution. however, i have a monitor well capable of running that.
I have a dell 2300 and the only drivers i can find are for xp on their site. I have been told maybe the graphics card is not strong enough, however, it is only 4 years old. Is it that big of a deal.
I need some help. I am not currently at my computer but i will update with system stats. when i get back.