Make Mbr Slots Available?
Jan 5, 2012How to make mbr slots available?
View 3 RepliesHow to make mbr slots available?
View 3 RepliesAs the title already says, I'm having problems with my usb slots not working sometimes for my mouse and keyboard, they either stop working for a few seconds and I get the windows "connect/disconnect" sound or they just stop working which can be fixed by repositioning the 2 usb's into a different set of slots. This solution however only works for a while until the same problem occurs again and I have to reboot to get them working again, this problem nearly only occurs with the rear usb slots, it does, however, somethimes affect my front 2 slots where I have a headset plugged in, this is noticeable immediately as any sound heard from the headset is wrong (can't really explain how it changes ). I have already tried uninstalling/updating drivers and turning on legacy support in the BIOS but to no avail.
View 3 Replies View RelatedI'm looking to upgrade my desktop to be usb 3.0 capable. The only option I can see since my motherboard doesn't have any is PCI and PCI-e card adapters. Problem is, I have none available. I expected there to be a version where the usb 3.0 port would connect to a sata port. I don't see any. There are also plenty of USB3.0 etc front bays, but unfortunately these products don't give much info on how these are connected internally.
View 8 Replies View RelatedWindows 7 Not Detecting PCI Slots after Format - Previous thread about this problem, Bare Foot Kid suggested I made a new thread in here and linked you guys back to it. I'm having major problems with my PC at the moment. It was all working well but it was due for a clean and I had all the files I wanted off the Harddrive so I put in the Windows 7 CD and rebooted the PC. I changed the BIOS so the CD/DVD drive was 1st priority and let it reboot itself. The installation went smooth. I initially had 2 partitions on the Harddrive, I deleted them both and created 2 new partitions and installed Windows onto the smaller one. Everything seemed fine but when I got into Windows I noticed I couldn't set my resolution to the normal dimensions like I always could after a format. I checked Device Manager and under the Display Adapters and Sound Controllers menus there is no sign of my HD4890 and Xtreme Music. I know the HD4890 is working at least because I have the monitor plugged into it and it works but Windows doesn't detect the card at all and is running off the onboard because it's the only choice it has.
View 8 Replies View RelatedI'm having major problems with my PC at the moment. It was all working well but it was due for a clean and I had all the files I wanted off the Harddrive so I put in the Windows 7 CD and rebooted the PC.I changed the BIOS so the CD/DVD drive was 1st priority and let it reboot itself. The installation went smooth. I initially had 2 partitions on the Harddrive, I deleted them both and created 2 new partitions and installed Windows onto the smaller one. Everything seemed fine but when I got into Windows I noticed I couldn't set my resolution to the normal dimensions like I always could after a format. I checked Device Manager and under the Display Adapters and Sound Controllers menus there is no sign of my HD4890 and Xtreme Music. I know the HD4890 is working at least because I have the monitor plugged into it and it works but Windows doesn't detect the card at all and is running off the onboard because it's the only choice it has.I tried installing drivers for the motherboard, graphics card and sound card but it didn't fix the problem. I also flashed my BIOS with the latest BIOS update from the Gigabyte website. I've tried formatting again 3 times which made no difference. I've tried removing both cards from the PC and booting it up, turning it off, replacing the cards and booting it up, but Windows still didn't detect either of them.
View 4 Replies View RelatedI've built Windows 7 32 bit on my Vaio VGN-AR71S, but the memory card slots are missing. I've tried installing fixes but they've not workedAlso the BD/DVD eject button beside the keyboard doesn't work - can this be enabled in Windows 7?
View 6 Replies View RelatedHiding Media card slots in Explorer, any body know how its done?,obviously I want them to come on when media is inserted but I want them hidden when their empty.
View 2 Replies View RelatedI have USB 3.0 slots in my Dell Laptop. My desktop has a couple of these, too, but also a number that are USB 2.0. The Hauppauge HD-DVR and Media Center remote which work fine when used with USB 2.0 slots don't work in USB 3.0 slots.
View 1 Replies View RelatedI recently bought a USB 3 flash drive and was curious why I was only getting 32mb/sec read and about 20mb/sec write speed. Could it be that my usb 3 slots are not really usb 3?
View 7 Replies View RelatedI have a problem with my second ram slot, does anyone know how to properly adjust the voltage to my ram slots through the BIOS of a Gigabyte P55A-UD3P Motherboard.
Also if anyone can tell me the desired voltage for each RAM slot.
I did the Asus live update, soon as i hit ok, one of my usb slots stopped working but the other is working just fine. It makes the noise when you plug in something, but wont work.
View 2 Replies View RelatedI need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies View RelatedI wanted to use my 180gb ssd as a boot drive and I do not know what to do. I installed windows and some drivers on the hdd but i want to start over and I need some guidance.I am doing a clean install now. once thats done how do i make the ssd the boot drive to make my system scream! also will i need to put drivers on both hdd and ssd?
View 5 Replies View RelatedI have two hdds (500gb 7200rpm) in my laptop and have 260gb of data on the second one. I wanted to create a partition for games at the beggining of the 2nd drive (the left side) as i heard it increased performance to put games in anoher drive and at the beggining of the drive.Will it make difference to make a partition at the beginning or at the end of this drive when it comes to gaming performance?My cousin showed me one game in the same drive installed in the 1st of four partitions of a 500gb 7200rpm (the same i have) performing with 3-5 fps more than that game installed in the 4th partition of that same drive....
View 9 Replies View RelatedIs it possible to create an iso file of the Windows 7 dvd so I can then burn the iso to a usb flash drive for installation.
View 7 Replies View Relatedbought laptop, its loaded with win 7. i hate it, its horrible i cant find anything. havnt worked out how to make it look like traditional windows like xp. i am silver surfer, like gadgets but all i know i taught myself.
View 4 Replies View RelatedI want to take my Windows 7 from 32-bit to-64 bit. I know that to get from a 32 bit OS to 64 bit you have to do a clean install. Problem is, i upgraded to 7 from Vista about a year ago using a 32 bit version downloadable installer so there's no discs with 32 and 64 bit version. So I guess my real question is can i use a 32 bit upgrade version's key on a 64 bit non-upgrade version? I could download a 64 bit version ISO and do a clean install with that, right?.as long as the key i already have would work?
View 3 Replies View RelatedSomeone want to explain how the hell you make a bootable ISO from these leaked builds?
Everything I try is FUBAR.
Edit: Okay..nevermind..I Frankenstein it and figured it out finally..I just copied the install files onto my USB flash drive and rebooted and set to boot to USB drive.
No need for an ISO
Edit 2: ...Okay..I give up..I get an error during install saying Windows can't install the required files. The file may be corrupt or missing. bla bla
Anyone else getting this with the 32bit leaked copy that just came out?
i recently acquired a virus that i've now taken care of, but it seems to have left my computer damaged. i can't change my wallpaper, for one. and whenever i save or upload something (for example, when i want to upload a video on to Internet and you get that window pop-up where it gives you the option to upload something from a certain location), the location for desktop is completely missing when i use one of my browsers - i can't access it at all.
i've also noticed recently that i can't even make changes to my desk top icons. i arrange it by date -for instance- and when i restart the computer, it goes back to the way it was before the change?
I just downloaded speedfan and I noticed that my CPU is really hot.
I don't know much about it, but is my pc in danger with this heat? my room is 21 C and outside is -1 to -5 C
I have a new hdd and I got a dvd with Windows 7.
Unfortunately it isnt bootable, so how can I make it bootable?
I only have a laptop(with dvd burner) an empty dvd and the Windows 7 dvd.
So how can I make it bootable?
Rip the files off, and then?
Maybe it's a stupid question,but I can't figure it out how...?
At this moment,I have Win 7 buil 7000 32 bit installed,and I want install x64 version,so I have downloaded Windows 7 build 7048 x64,but it's not a bootable ISO file.
I managed to make an ISO,but have never did and don't know how to make a bootable ISO file,I have already tried several programs(PowerISO,MagicDisc,ImgBurn,Nero 8),but every time I burn an image on disc,it doesn't work.
If there is someone who is willling to explain me correct way step by step,I'll be really greatful.
i have pc and laptop and i want to make network between them
and i have 3com adsl wirelees 11g firewall
i want 2 share my movies songsa games and every thing without i use cable i want 2 make it wit the wireles .
I know what you`re thinking: "why don`t you just go for Windows 7 x64 ?". Belive me, I did... or at least, I tried. But I was overwhelmed with BSOD's which I was unable to fix. I posted a thread *here* about the BSOD's, sadly I couldn`t get rid of them. Long story short, 2x2GB=BSOD, but 2GB=OK. Now I`m not gonna sit with a 2GB stick on my shelf. So I`m willing to give up on x64 and just go for x86 (haven`t got around to installing x86, will do that tomorrow; hope it runs ok with 2x2GB RAM installed, otherwise I`m gonna go completely crazy).
Anyway, since x86 only shows 3.25 or 3.5GB out of 4GB, I found a very interesting article about doing something about this. *This is the link* to the article. The instructions on how to tweak Windows start from the part where it says "Patch Details" (around the middle of the article). I`m not a programmer, but I read the whole article and I pretty much understood what he`s saying. I am to understand that the file NTKRNLPA.EXE needs to be modified, but how? With what am I supposed to open it? BCDEdit is used later on, so I don`t think is that I need to use at first. Basicly, I don`t understand with what to open the file.
I have one boot able CD for some computer software installations. pleas tell me how to prepare clone of this disk?
View 2 Replies View RelatedI just bought ASUS Xonar DS to make my HTPC connect to Samsung HT-Z210 Home theater System via Optic cable (TOSLINK).I can Play DVD with out any problems with sound.
View 9 Replies View Relatedjust installed windows 7 ultimate because my old hardrive packed up on me, and now i find that my direct3d- directdraw-& agp acceleration are not available, can anyone advise me on how to enable them. enable & disable function not listed in my directx display.
View 8 Replies View RelatedI downloaded OFFICIAL Windows 7, but there is no ISO file so how do I make it bootable? There is a setup.exe file but since i have VISTA 32 bit i cannot clean install to W7 64 . So what do I do?
View 5 Replies View Relatedhow to make a bootabe dvd or which software should i use to make a bootabe dvd for win 7
View 7 Replies View RelatedI ignored the warning that permissions may not allow me to make changes because I thought I had all the correct boxes checked. Now I cannot see my C-drive because I don't have permission. I can no longer get into the permissions folder or anything else to make changes. Can the files that control this be deleted without destroying the whole registry?
View 9 Replies View RelatedI cannot make a backup. Error 0x80070002. How can I repair? I am using Windows 7 x64 Service pack 1.
View 3 Replies View Related