Can't Change CPU Voltage On MSI 990xa-GD55 Mobo
Oct 3, 2012why I can't increase the CPU voltage beyond 1.346000 V on my MSI 990xa-gd55 motherboard? I've tinkered with practically everything in the BIOS
View 9 Replies
ADVERTISEMENT
BIOS Voltage Change To Match RAM?
Dec 26, 2012I had 4gb or ram but then I added another 4 to make 8gb or ram, but I am getting bsod. How do I change the voltage to match the ram?
View 5 Replies View RelatedChange Of Mobo And Re-installing Windows 7
Feb 24, 2012If I bought a new mobo and did a clean re-install of my current OEM 64bit Windows 7,do I need to get a new license or can I just activate it online??
View 6 Replies View RelatedGA-990XA-UD3 Front Audio - Headphone And Mic Not Working?
Jul 22, 2012I have a new, custom build and cannot get the front audio to work. The two USB ports along side the Mic and Headphone jacks work fine.
System Specs
The motherboard is a GA-990XA-UD3. Chipset AMD RD9XO Rev 02. Southbridge AMD
SB10/950 R40. Bios Award Software Ver F8
CPU: AMD Phenom II x6 1090T Black Edition Tuban HDT90ZFBGRBOX
Memory: Corsair Vengeance 16GB 4 x 4GB CMZ16GX3M4A1600C9
OS: Windows 7 (6.1) Home Premium SP 1 (Build 7601) 64 bit. Direct X 11.0
Don't think it makes a difference but I am running displayport out of the graphics card (Zotac 560 ZT-50701-10M) into the monitor (NEC PA241)
I downloaded updated drivers for the Reatec HD Audio Manager but that made no difference. Audio out from the back panel works fine.
USB Not Functioning Even Though It Has Voltage?
Nov 23, 2011ati-bonefish motherboard windows 7 32bit
View 3 Replies View RelatedSystem Battery Voltage Is Low Message?
Feb 17, 2013this message has started showing up, and subsequently, various websites just freeze and I have to X out of the page
View 3 Replies View RelatedNew Ram Installed, Cant Get Voltage / Frequency To Stick?
Jan 14, 2012i've just installed 8GB OCZ Gold DDR2 RAM on my Asus P5Q Pro Turbo board, the timings on the RAM state PC8500 1066Mhz 5-5-6@2.10v. I have checked in the BIOS and the frequency was set to auto and the voltage was also set to auto, I have set these to 1066 and 2.10 respectively but when I checked with CPU-Z it reports frequency 534.9 and voltage 1.80. I made sure I saved the changes before i exited the bios
View 4 Replies View RelatedFix A Computer That Say System Battery Voltage Is Low?
Oct 28, 2012how to fix a computer that say system battery voltage low....and it shut down...
View 3 Replies View RelatedOld ATI Mobility Radeon X1800, Adjust Voltage
Jan 15, 2013I have xps m2010, it uses notebook graphic mobility radeon x1800. the card is so old that many of the recent GPU software can't seem to read it properly. GPUz was able to see core/memory clock and memory but unable to see temperature or voltage.
GPU meter/PC meter just fails to see it at all, not supported it seems, same goes for GPU monitor or GPU observer, cant see it.
however temperature shows up in Hwinfo but no voltage either. I was able to download ATItool and able to change it's core/memory clock speed but it doesn't have voltage control.
what I want to do is for it to run at a lower VID/clock when idle, something like CPU speedstep or nVidia powermizer. when idle, lower voltage, temp and clock speed, when used, back to highest etc.
Adjust Voltage To RAM Slots On P55A-UD3P Motherboard?
Nov 29, 2011I have a problem with my second ram slot, does anyone know how to properly adjust the voltage to my ram slots through the BIOS of a Gigabyte P55A-UD3P Motherboard.
Also if anyone can tell me the desired voltage for each RAM slot.
Should I Use My Driver CD For My Mobo?
Oct 25, 2009I have a driver disc for my Asus mobo, do I need to use it now on 64?
View 1 Replies View RelatedUpgrading CPU And MoBo?
Jan 15, 2013I'm looking to upgrade my CPU and Motherboard from what I currently have.I recently purchased a GeForce GTX 680 but I am seeing minimal improvement from my previous GeForce GTX 480, and have come to the conclusion its my CPU holding me back.
Current specs -
OS - Windows 7 Home
CPU - Intel i7 930 @ 2.80GHz
Motherboard - Gigabyte X58A-UD5
I have been told in the past I cannot replace one and not the other due to my CPU/Motherboard being 1366 pin which is no longer in make.
Reinstall With New Mobo And CPU?
Aug 7, 2011I just got a new mobo and CPU and was wondering if I will need to reinstall windows with this. I have read different things, some said you can just repair others say complete reinstall.
View 2 Replies View RelatedInstalled A New Mobo And Ran Into Some?
Sep 20, 2012low computer knowledge person here and I have recently come into a problem after replacing my mobo/processor/gpu from my old computer. After hooking up the computer and booting it up, it hits the mobo screen then quickly goes into the black screen that says that windows 7 can not be started and gives me the two choices of system startup restore and start windows normally.
Starting windows normally unfortunately returns me to the black screen and so I tried out the restore but to no avail it was unable to fix my problem.Also, I was stupid enough to not transfer any files from my hard drive off to a backup.
My two questions are if it's possible for me to put my hard drive in a friends computer and take the files off there and also if there is any way to fix my hard drive after changing motherboards.
CPU-Z Will Not Detect Mobo ?
Oct 28, 2009I just built my PC (first one, sounded like a good idea at the time) and was told that getting the latest drivers would "fix" this issue. Problem is, I haven't had a PC or really been on the net since 2001, (don't laugh) so.....I don't know how to get the "right" ones. I realize that i've built something waaaayyy over my head/experience level, so now I just want to learn all that I can.
View 6 Replies View RelatedWindows 7 Repair With New MOBO Old HDD?
Oct 2, 2012OEM pc MOBO died, replaced MOBO, windows having trouble booting (expected). attempting repair with no results but FAIL. I am noobish, so I ask, what can I use to help the repair process? PS: I upgraded my OS out of the box From win 7 home premium OEM install, to Windows 7 Ultimate x64 via disk. I also have win 7 premium (full) on disk from another PC i installed it too. I would do a clean install, but I can't lose any of my photos and data.
View 2 Replies View RelatedAsrock Mobo / Usb2
Oct 31, 2009I have an asrock 775dual-VSTA and I recently upgraded to Windows 7 Ultimate, 32bit.
Things seemed fine, but I realized my USB was performing very slowly.
For example, it takes hours and hours just to upload a few albums to my iPod.
I presume it's a motherboard driver problem. Does anyone know of a fix for this? I dont see any Windows 7 drivers from Asrock for this Mobo.
Im *really* hoping I dont have to buy a new one.
Here are some screenshots from my Device Manager. As you can see, USB seems to be fine, but there are those unknown devices that I have no idea what they are. As far as I can tell, everything is working fine except the USB speed so I presume these unknown devices are related?
Mobo Drivers - MS Or Vendors
Nov 2, 2009If device manager is happy that Windows 7 has managed to find drivers for everything automatically, would the team recommend leaving well alone or going for the mobo vendors drivers?
(I ask because all was well until I installed the Asus Windows 7 drivers for my P5Q...)
AMD II X4 965 Processor Not Compatible With Mobo
Sep 25, 2011I have an issue with my system.
- ASUS M4N68T-M LE V2 MoBo
- Processor is AMD phenom II X4 965 Black Edition.
- One Stick of 2Gb memory DDR 3
- ATI Radeon 6870 Sapphire.
If I restart my system (and this happens like out of 100 restarts 97 times) the system would be on the black post screen and say that the CPU is not compatible with my mobo. Then in order to resolve this I have to got to BIOs and turn on all the cpu cores and the unleashing mode under CPU and restart. Then it would reflect that all the **4 cores are active** and then it would work fine. But why does this happen after every restart. I thought it was CMOS battery but the date and time and other BIOS settings are fine.
Migrating From Amd Mobo To Intel
Oct 11, 2011I know that since during a windows installation, certain libraries are installed specifically for certain types of chipsets/cpu's and that an abrupt hardware change can cause failures. I read on an article somewhere that you can migrate windows without hardware errors if you manage to get windows to operate on a politically correct mode similar safe mode to boot up with minimal functionality before installing the appropriate drivers for the new board.
View 3 Replies View RelatedUse 2133 Ram In A 1333 Mobo?
Jan 8, 2012ok, sounds like a stupid question, i know, but if i purchase them by ende of tomarrow i get 25% off, and i plan on upgrading mobo soon. i have been generaly informed on another post that 1600 in 1333 should work, it will just operate at 1333 speed, is it the same with 2133?
View 9 Replies View RelatedMobo Not Controlling Fan Speed?
Feb 12, 2012I bought a scythe fan for my case to go on the side, i've tried plugging the 3 pin connector into the PWR_FAN(3 pin) and CHASIS_FAN(4 pin), it gets detected in the bios and in speedfan, and various other software to monitor the fans.
Its running at 3,000 RPM which is way to loud for me, i've tried ASUS AI suite, amd overdrive, speedfan ect to try and turn down the RPM but none of them effect it, its going at 100% non stop and wont slow down no matter what, and even in the bios when i selected 'silent' mode it did not budge in speed at all.
Mobo: ASUS M4A87TD EVO AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard
Fan: Scythe DFS123812-3000 "ULTRA KAZE" 120 x 38 mm Case Fan
Anything i can do to make this software or bios adjust the fan to the correct speeds? If i bought a hardware fan speed controller would that work? I was looking at something simple like this: Newegg.com - Sunbeam PL-RS-PCI Rheosmart PCI 20W Fan Controller
But i'd rather not buy if my Mobo or some software can adjust the speed for me.
What Does Phase Powering Mean On Mobo
May 20, 2012Am planning a new build and the Asus P8Z77-V board is cheaper by $40 than the Asus P8Z77-V Pro but has 8 phase power as opposed to the Pro with 12 phase power.Now I have done a quick Google and there are refs to this but could someone put it in plain / basic wording as there are some refs to CPU power supply, vdroop, and other tech stuff that I don't really understand??I intend running an i5 3570K and have try at over clocking - if that has any relevance for what my query is about.
View 4 Replies View RelatedNew Mobo Only Allowing Half Of Ram?
Nov 27, 2012recently i bought a new mobo and CPU. now that everything is installed its telling me i have 16GB of ram installed, but only 8GB are usable.... here is my new processor, AMD FX-8350 Vishera 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor here is the new mobo..ASUS SABERTOOTH 990FX R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS?G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory its the same type of ram i have now.. i'm noticing that on the mobo, unlike my old mobo, the slots are different ----alternating---- colors.. where my old board the colors were paired together.... should i be placing the ram in a certain way?
View 1 Replies View RelatedASUS M2n E SLI Mobo No Sound
Jan 4, 2010I have the above mobo, just installed windows 7 64bit. Everything else is fine but I cannot get the sound to work even though when I test or play music I see the bar rise and fall. I have exhausted everything I know to do. I did see the CM6501 thread here but after trying the drivers, it still does not work and when I click the CM6501 icon, it freezes the PC and I have to reboot.
Any ideas?
CM6501 integrated USB soundcard.
How To Prepare To Upgrade Mobo And CPU
Jan 24, 2012In a few days I will be upgrading from my AMD 965 Black and Gigabyte GA-870A-UD3 to an Intel i5 2500k and GIGABYTE GA-Z68XP-UD4. I was curious as to what you all thought I could do to minimize effort and problems restoring my system settings, programs, and data files after a clean install of Windows 7.I currently have 3 HDDs; A 640GB for my OS (C: ), a 1TB for Programs and User files (D: ) (Pics, Docs, DVDs, etc.), and a 500GB (E: ) for Win7 backups. I also have a NAS (\NAS) with 500GB. At this point I have good User File backups on E: and am now creating IFW drive images of C: and D: onto the NAS. I have also generated reports from SIW (Hardware, Software, and Network) and Win7's System Settings from the Advanced Tools control panel.
View 5 Replies View RelatedWindows 7 Won't Load In New Mobo
Jan 3, 2013Today I built my new rig (specs below) and I kept the hard drive off my old gateway to save some coin. After I installed all the new hardware I turned it on and the ASrock screen popped up and prompted me to choose instant flash, select boot order, enter BIOS, and switch screen. When windows 7 attempts to load it stops while the dots are floating towards the center. The windows repair tool didn't help what-so-ever (go figure >.> ) and the PC won't/can't run in safe mode. I updated the BIOS from the ASrock website but that didn't help. I've tried all of the options provided and none worked. I don't want to format my drive and lose my data but I will if I must because I may have access to a new copy of Windows 7.
Corsair cx500
WD green 1TB
Sapphire 7950 3gb
Cooler master elite 430 mid case
ASrock 770iCafe ATX motherboard
AMD FX 6100
Basic RAM (6GB) (x2 2GB, x2 1GB)
Hyper 212 evo
Help With ASUS Mobo Driver
Oct 26, 2009Just installed Windows 7
Do I insert the CD that came with my PC (which included the original ASUS driver) & install that driver, THEN go to the ASUS site and update the newest driver?
OR is there another/better way.
Oh - did a clean install of win 7 and I do see a Windows.old folder - if this is of any help.
Computer Will Not Sleep After Installing A New Mobo
Aug 5, 2011Computer will not sleep after installing a new mobo. It starts initiating sleep mode and the fans and such shut off and the screen goes blank but after a second the fans and everything come back on but the screen stays blank and the only way to get it out of this state is to hold the power button until it shuts off. I checked the BIOS and did not see anything related to sleep mode. Where would a setting for this be located?
View 4 Replies View RelatedNew Mobo Won't Load Sound Card?
Nov 13, 2012new mobo won't load sound card?
View 7 Replies View RelatedHow To Start Windows 7 After New Mobo / CPU Installation
Feb 15, 2013I've replaced much of my PC's hardware, mobo/CPU/memory and I want the existing Windows 7 HHD to boot. What's the method? I can't even figure how to install the new mobo drivers without a booted OS.
View 14 Replies View Related