BIOS Voltage Change To Match RAM?
Dec 26, 2012I had 4gb or ram but then I added another 4 to make 8gb or ram, but I am getting bsod. How do I change the voltage to match the ram?
View 5 Replies
ADVERTISEMENT
Can't Change CPU Voltage On MSI 990xa-GD55 Mobo
Oct 3, 2012why I can't increase the CPU voltage beyond 1.346000 V on my MSI 990xa-gd55 motherboard? I've tinkered with practically everything in the BIOS
View 9 Replies View RelatedCan't Change The BIOS
Dec 15, 2011how can I get my HP G series to boot from disk when I can't change the BIOS as a element has been changed and I am trying to restore the computer
View 4 Replies View RelatedUSB Not Functioning Even Though It Has Voltage?
Nov 23, 2011ati-bonefish motherboard windows 7 32bit
View 3 Replies View RelatedCan't Change BIOS Configuration
Nov 14, 2012i got a toshiba satellite p775d and for some reason, the bios won't allow me to change any settings. it isn't asking for a password or anything like that, it just won't let me navigate to the appropriate parts of the bios gui in order to adjust the configuration. i tried flashing with the toshiba support utility, it won't permit it since the bios is the same version apparently. the bios manufacturer website utility won't permit a flash either, it only reprograms the blocks. do i have to take it into a professional?
View 4 Replies View RelatedHow To Change The Resolution Of BIOS
Jun 23, 2012I have a computer running on Windows 7 with a GTX 290 card and a first gen i7 920 CPU. Ever since I built the computer a few years ago the start up is just over to the left, I can't see anything on the left side and the right side is just a black bar. The proper resolution isn't set until the log-in screen. The computer did this even when it was running on Vista. I've noticed my computer does this when running on certain resolutions that the monitor isn't good with. So my question is is there any way to change my resolution in my BIOS?
View 9 Replies View RelatedSystem Battery Voltage Is Low Message?
Feb 17, 2013this message has started showing up, and subsequently, various websites just freeze and I have to X out of the page
View 3 Replies View RelatedNew Ram Installed, Cant Get Voltage / Frequency To Stick?
Jan 14, 2012i've just installed 8GB OCZ Gold DDR2 RAM on my Asus P5Q Pro Turbo board, the timings on the RAM state PC8500 1066Mhz 5-5-6@2.10v. I have checked in the BIOS and the frequency was set to auto and the voltage was also set to auto, I have set these to 1066 and 2.10 respectively but when I checked with CPU-Z it reports frequency 534.9 and voltage 1.80. I made sure I saved the changes before i exited the bios
View 4 Replies View RelatedFix A Computer That Say System Battery Voltage Is Low?
Oct 28, 2012how to fix a computer that say system battery voltage low....and it shut down...
View 3 Replies View RelatedBios Doesn't Let To Change To DVD Boot Even When Select It
May 18, 2012I forgot my windows password, so I created an Ophcrack ISI Image DVD. When I try this the bios shows my DVD drive in the list of bootable devices, and I select it, save changes, and exit bios, the computer then tries to boot from the hard drive (not the DVD drive selected) and obviously starts up asking for my windows password which I do not have. WHY won't the bios allow me to change the bootable drive to DVD?
View 3 Replies View RelatedOld ATI Mobility Radeon X1800, Adjust Voltage
Jan 15, 2013I have xps m2010, it uses notebook graphic mobility radeon x1800. the card is so old that many of the recent GPU software can't seem to read it properly. GPUz was able to see core/memory clock and memory but unable to see temperature or voltage.
GPU meter/PC meter just fails to see it at all, not supported it seems, same goes for GPU monitor or GPU observer, cant see it.
however temperature shows up in Hwinfo but no voltage either. I was able to download ATItool and able to change it's core/memory clock speed but it doesn't have voltage control.
what I want to do is for it to run at a lower VID/clock when idle, something like CPU speedstep or nVidia powermizer. when idle, lower voltage, temp and clock speed, when used, back to highest etc.
How To Enter Into BIOS In Windows 7 To Change Boot Order
May 14, 2011I am trying to install ubuntu from a pendrive...I need to know how can I enter into BIOS in windows7 to change the boot order.
View 7 Replies View RelatedRAID Array Setup - How To Get Into BIOS And Change Settings
Jun 21, 2012I am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:
Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM
I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?
Change Setting To AHCI In Bios And Then Install Windows 7
Mar 1, 2011Im installing a new SSD and i wanted to use it as an oppertunity to change everything over to AHCI and wanted to clarify one thing before i went ahead. Im going to change the setting to AHCI in the bios and then install windows 7 on the SSD. Once i get into windows i was going to plug in the old Hard drives. With the old hard drives being used when my computer was on IDE will they be able to be read or will all the data be lost.
View 1 Replies View RelatedCan't Access Bios To Change Boot Order / TrueCrypt
Feb 27, 2012I am currently unable to access my bios because of the TrueCrypt Boot Loader. This also means I can't change my boot order to boot into a cd. The boot order was messed up, and whenever the password is entered it just says "No available partition" and then shuts down, so I have to press [ESC] to avoid the boot loader. And this skips any chance to enter the bios.Is there any way to fixmbr/fixboot without booting into a USB or CD?The only other way would be to remove my hard drive and get a new one to install windows on.
View 7 Replies View RelatedChange The BIOS For Auto Restart After Power Outage
May 24, 2012I am hooked up to a UPS, but when that runs out and I am away, I sometimes need to be able to remotely logon to my computer. Is there a way to get the BIOS to automatically restart the computer after the UPS runs out when the power goes out?
View 3 Replies View RelatedAdjust Voltage To RAM Slots On P55A-UD3P Motherboard?
Nov 29, 2011I have a problem with my second ram slot, does anyone know how to properly adjust the voltage to my ram slots through the BIOS of a Gigabyte P55A-UD3P Motherboard.
Also if anyone can tell me the desired voltage for each RAM slot.
Mix And Match RAM
Nov 23, 2012I'm going to need to do a little video editing (with the After Effects trial) in a few weeks' time, so I decided to practise a little beforehand so that my edit isn't half bad. When doing a RAM preview, it only loads at around 10 FPS which takes ages if I'm doing a slow-mo effect. When I built this PC, I only put 8GB of RAM in it as I wasn't planning on doing any video editing, but now that I am, I'm considering an upgrade. Is it unwise to mix and match different brands of RAM? I'd have to match the timings, speed and voltage, but apart from that I can't think why it would matter.
View 5 Replies View RelatedNo Items Match Your Search
Nov 15, 2011THE OS of my net book is Windows 7 Home Premium and I would like to know why I cannot find a FILE when i type its name in "Search for programs and files" in Start Menu. It can only show PROGRAMS you would like to find. Ex. I would like to find techguy.doc. I knew the file is in my system but I cannot search it in Start Menu Search Panel for quick access. It says No Items match your search. In contrast, in my desktop (OS is Windows 7 Ultimate) it can find specific file ( pictures, music, doc etc) and also the programs. I would just like to know if it depends on the Windows Edition.
View 6 Replies View RelatedDoes A Cooler Have To Match The CPU Or Just The Socket?
Jul 10, 2012It fits the socket but does it have to support the CPU as well? I want to buy a cooler and i see in the description that other than the socket they also list what CPUs are supported.
View 1 Replies View RelatedUsing WOL With Pattern Match On Asus P5B
Jun 9, 2011I've gone through every BIOS, network card, and windows setting I can find any reference to over the last 48 hours, to no avail. I've mostly isolated the problem, just can't find anything that shows me how to fix it.
System Details:
Asus P5B-Deluxe w/ WiFi, Latest BIOS Update
On-board Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Enabled and being used - latest Driver installed
On-board Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller - Disabled and unplugged - latest Driver installed
Intel Core2Duo E6800
2GB DDR2 RAM
ATI Radeon HD3870
I've got the system setup so that the network card SHOULD only wake up the computer if it sees the "Pattern Match" packets which have supposedly been improved in Windows 7. Magic Packet just won't work for what I need, so I disabled that even for the sake of ruling out issues.
Issue: Any time ANY network traffic comes across the network card, the computer comes out of sleep, even though I'm quite sure they don't fit the "pattern match" that it's supposed to be looking for. I've done packet sniffing etc, and the card is behind a switch all by itself. I have proved this theory a number of ways, including disconnecting every other device on the network which allows the computer to stay asleep, but as soon as you turn another device on, this one wakes up.
Workgroup Name Cannot Match Username?
Jan 18, 2012Does anyone have experience with windows 7 (32) not allowing the network workgroup name to match a username? Do to some existing procedures we would like the username & workgroup to be the same. This works fine on XP machines but not on the Windows 7 machine.
View 1 Replies View RelatedSound And Picture Are Not Match
Feb 27, 2012what should I do the sound and picture are not match when I view movie from the internet
View 1 Replies View RelatedSettings Saved Does Not Match The Connection
Nov 10, 2012I have just finished my very first computer build and am rather happy with most things.Unfortunately I am having problems connecting to the internet.I have a temporary dongle in place and because it's my only option for about a month I kinda need it to work.When I first connected it I found my connection and I successfully connected, I downloaded Google Chrome and Steam, then unfortunately it randomly stopped working.Where the strength bar should of been, there was a large red cross, when I found my connection it read "The settings saved on this computer for the network do not match the requirements of the network".
View 1 Replies View RelatedNo Items Match Your Search When Browsing
Feb 9, 2012Searching via the Explorer search bar/start menu for music no longer produces any results. My music has always been stored on an external drive, plus it's added in Music>Libraries - same results in both locations. If I search a particular folder that I know contains what I'm searching for, I still find nothing. (For example: Searching for "bowie" or "heroes" in a big folder of David Bowie albums). I've recently tried adding this external drive to the index, just in case, although actually, it wasn't being indexed before I had the problem and I would still expect the files to be found -- albeit slower -- without indexing! I'm not aware of having changed any settings that could cause this.
View 9 Replies View RelatedThe Setting On The Computer Do Not Match Requirements For The Notwork
Jan 24, 2013I am UNABLE to connect to my home wi-fi after a brief power interruption... it get the following message "The settings on this computer do not match the requirements for this network." and the 'connect' button is grayed out!!! my wired internet works just fine after the power flash. but my wireless seems to NOT want to allow me to connect!
View 6 Replies View RelatedComputer's Ecurity Settings Do Not Match To Router
Oct 18, 2012The main problem is that my ONE computer's security settings do not and will not match to my router. I'll try and list everything I did. Hopefully I won't miss anything. Obviously, I try to look at the settings and see why they don't match. My netbook is also running on 7 Ultimate (32bit), and it has no problem whatsoever connecting to the router and accessing he internet. I look at the wireless settings on there. Match perfectly to the ones in the properties. So far nothing logical. I try using the WPS button on my router to connect. It tries to, but it always says it simply can't. I copied the wireless settings from my netbook to my desktop (the computer in question) on a flash drive and tried to put them onto my desktop. Signal strength is excellent, no problem there. Reset router to factory default settings. No changes there.Called Comcast (the router/modem is actually theirs).
View 3 Replies View RelatedWindows 7 64bit Drops WiFi - Settings Do Not Match
May 2, 2011My girlfirends new PC has Windows 7 64-bit on it, now getting on the internet is a real headache! every time I click the network list at the bottom, and select the network I want, it will connect but if I make it show the the list of networks again it will loose the network. When it does connect after a while it might drop off then trying to reconnect come up with "the settings do not match" I have to change them, then change back to get it to connect again but if I keep an eye on it while it connects it fails.
Windows 7 Home 64-bit
Disabled the IPv6 setting
I tried the wifi client that comes with the wifi card
I tried changing the router settings
It's WPA2 security
Print Preview Doesn't Match Printed Document In IE 8 & 9?
Dec 7, 2011I'm helping to develop a web application that uses iframes. On the main page (outside of all frames), we have a div that we use to display and print forms. We also have 2 nested iframes; the innermost iframe contains the main page content. When printing, we use extensive CSS and Javascript (contained in the outermost window) to hide everything except the print div.When I use File > Print Preview, it always displays the correct preview; that is, the outermost window which contains the print div. Printing from the Print Preview works as it should. However, when I use File > Print, it seems to print whatever window has focus, not the entire page (outermost window). Therefore my print div doesn't get printed and all I get is a printout of whatever is currently onscreen. Why doesn't the print out from File > Print match what is shown in the print preview?
A related issue occurs when using JavaScript's window.print(). When I call window.print from within the print div, it prints as it should. But when I call parent.parent.window.print() from within the double-nested iframe, IE still only prints the window that has focus, not the outermost window (as shown by "parent.parent."). And since they just clicked on a button in the innermost frame, the innermost frame has focus, my print div doesn't print and all I get is a printout of whatever is currently onscreen. I have been using "parent.parent" for all other Javascript calls from the nested iframe to the outermost, so I know that's not the problem.
My temporary solution is to focus on the outermost frame when the users mouses out of the nested window (ie, when they mouse up to the file menu) Code: window.onmouseout = parent.parent.window.focus(); and focus on the outermost frame when the user clicks the print button that is within the nested frame. I would really rather not do this focusing, especially on mouseout, because it seems to cause some issues when the user pulls up another application.I have also tried using the onbeforeprint event to focus. The onbeforeprint was triggered, but I couldn't get the focusing to work correctly.I haven't been able to find anything regarding these problems online; has anybody had similar problems?
Japanese Keyboard 00000411 Keys Do Not Match With Symbols
Sep 5, 2012Has anyone of readers a Japanese keyboard and trouble with the assignment of the keys when working in English.
I have a querty keyboard, all letters/CAPITALS work fine. However the majority of the symbols !@#$%^&*()_+{}:"<>?, are assigned to the wrong keys
Example @ is SHIFT 2, but it indicates on that key "
Manually Adding Data But Wmp Won't Match Complete Album
Aug 15, 2012trying to manually add album data but wmp forces me to match every single track of every single album - when it already knows what the album is and the contents, as it shows the correct picture and album. This process should take me about 20 years. I assume this is because I am not letting wmp retrieve internet info as it wants because it's always wrong, (so MSN make it as difficult as possible to get info manually I guess)
and because it keeps making single track downloads into individual albums instead of a folder of mixed tracks which is WHAT I WANT. I don't wish to have my music arranged according to a programmer at microsoft... but this takeover by microsoft is getting more and more frustrating as they eliminate more and more customer choice from programs and dictate how it will all be set up and run from microsoft.
Is there anyway we can organise albums, tracks, files and folders the way we want to, instead of having microsoft shuffling them around and deleting databases, playlists and formats it doesn't agree with? Why can't I match the whole album when it appears in the search results? It's not rocket science