Change The BIOS For Auto Restart After Power Outage
May 24, 2012
I am hooked up to a UPS, but when that runs out and I am away, I sometimes need to be able to remotely logon to my computer. Is there a way to get the BIOS to automatically restart the computer after the UPS runs out when the power goes out?
I am hooked up to a UPS, but after that runs out and I am away, I sometimes need to remotely logon - in which case I need the computer on. If I need to change something in the BIOS, please give specifics of how to do this as I have looked in there and found nothing related to this.
In bios (I have ASUS mb P5Q SE Plus) i can setup the pc to automatically power on at 1 certain time, does anyone know if its possible at all to setup more than 1 autopower on time either through bios or some application (free)?
I had a power outage a few days ago and went to turn on my pc again and it is telling me to install a OS cause now there is no OS so i tryed to format the hard drive and install a fresh copy of windows 7 64 bit but partition any of the 3 wont install on it and it tells me its the wrong format on one and i cannot change it..
I made the huge mistake of booting my custom built machine during a storm and as luck would have it, the only time that the power was lost (for about 2 seconds) occurred at that time. Now my machine will not boot. Startup repair comes up and tells me that it could not find the problem and I must shut down. I have tried restoring, mem tests, hard drive tests, reseting my mobo to failsafe settings, booting from the windows 7 recovery disk, booting off of the original windows 7 install disk, forcefully kicking it and crying. Nothing has worked, however. No matter what method I use, even when successfully completed, I am still faced with the startup repair error. I built the PC myself, so I'm not a complete fool when it comes to computers.
This HP computer is running Windows 7 - 64 Professional, version 6.1, build 7601 Service Pack 1. The last time I had a normal start up was last Saturday after turning off all the computers and unplugging due to thunderstorm activity in the area. Yesterday morning, Sunday, we had 4-5 momentary power outages where the electricity pretty much flickered a few times, then stayed on. This computer did start up, but the start up process took approx 20 minutes.
I restored the computer to 3 days prior with no noticeable difference, ran defrag with no noticeable difference, and ran chkdsk, which did make a difference. The 1st start after the chkdsk was a normal quick start, then subsequent starts take approx 3-4 minutes, so it has slowed down again, but not near as bad as the original problem. The start up goes as follows:
1.) The normal Blue HP start up screen for approx 20 seconds, then, 2.) The windows graphic with the changing colored "windows" on the black background, then, 3.) a completely black screen for approx 2-3 minutes with minimal flashing of the HDD light, then 4.) proceed to Welcome to Windows screen where everything loads and the HDD light is pretty much steady. Within 30-40 seconds of getting to this point the normal desktop is up, icons are loaded, and computer is ready to use.
My step 3 noted above - the black screen, is usually 15-20 seconds max, so it seems whatever the hangup is is occuring during that time. After the start up is complete everything works normally. There isn't any abnormal use of memory or CPU usage.
Aside from the surge itself, what other negative effects could arise from experiencing an outage while multiple programs are open and running? For example, if I lost power while regedit was open, could it change or possibly cause damage the registry itself? The machine in question is currently running Win 7 SP1 64-bit.
There was a quick power outage and the computer was forced off. I rebooted and now after the windows logo there is a gray screen that remains a very long period of time before the desktop appears. I am able to move the mouse but that is the only functionality I have.
I run windows 7 on a laptop (Asus G74SX) w an SSD and i forgot to connect it to the battery when i took a nap.Lately my battery is not in perfect state and when this happens, reconnecting the plug won't let me resume system, i have to restart windows 7 and get the message that windows improperly shut down etc etc.
I have been having a serious issue with my PC. The PC will boot up without incident, but if I try to access explorer or the OS, it will slow to a crawl and eventually freeze. I have encountered this with firefox, the start menu, and when trying to access the task manager. The problem is consistent, occuring everytime I start the machine. Usually within the first few minutes of a boot-up, Windows has frozen and I must force a hard reset.
The only thing I can think of which may be the cause is a power outage which occured in the night. When I woke up, the PC was off and the problem began as soon as I booted up. The PC was plugged into a power strip which was not tripped by the outage.
I can boot up in Safe Mode, which delays the onset of the crash, but doesn't stop it. I have tried using system restore by accessing the menu during start-up (F8) but the system restore always fails at the very end. Looking at the inside of the PC, there doesn't seem to be any visible damage (that I can detect) and at no points does anything seem to be giving off any excess heat.
When I press CTRL+ALT+DEL in an attempt to access the task manager, the screen goes black and the cursor turns to a wheel. After several minutes, the wheel will stop and a prompt will appear stating "The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."
Computer frozen on restore systems after power outage. I cannot use disc 2 reboot - all keyboard actions frozen. All I want to know is - would I have lost what's on my hard drive and how to be able 2 get it running again.
I had power outage reboot backgroud went back to default and so did the quick launch menu also some of my games act like i never played them before and have to re setup resolution and settings. Did some widows file get corrupt why did this happen?
Yesterday, there was a short power outage which caused my computer to force shut down. When I turned it on, the screen resolution was off, so I managed to fix it by hardware (the auto button on my monitor) since software-based fixing didn't work (which has managed to solve this problem in the past, at least I think it was the same problem). Anyway, after I did this, the icons were strange; bigger than usual, not e.g. 128x128 but rather 140x128 (that isn't the exact size but they were higher than they were wide). This is quite annoying. The circular icons have become ovals and the square icons have become rectangular. By the way, the same thing has, I think, happened to the taskbar as well. It's harder to tell with things other than icons, but it's visible. So basically, everything is slightly higher than wider than it should be, not only the icons.
I literally just built this today and was able to enjoy a very fast boot up speed with wim7 64-bit installed on my ssd drive but the power cable of course found a way to get unplugged from the wall and now the it takes an extra 20-30 seconds in order t boot up (at the "windows starting" ) screen. Right after I turned it back on the computer wanted to go into system repair and then it reset the pc to the back up that I had just set,
Is there anything I can do in order to get it too boot up like it was at first?
I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
I use my PC for audio production and I have a few external controller devices that are USB powered, for example a midi keyboard. I recently had to build PC due to a theft....long story short after building the new PC I've noticed that my USB buses have continual power to these external devices after I've powered down the PC. My old windows 7 PC did not do this. Is there a setting I can change to shut off power to the USB buses when I power off the PC? Or is this a hardware issue?
I now have W 7 Home premium. I have windows update set to auto update. As I was checking email and just cruizin the net etc. My pc just shut down and restarted. I discovered that it was the auto update. I want to continue to use auto update, but I don't want my pc to shut down and restart even though it warns me.
I'm using win7 ultimate & win xp sp2 pro in the same pc. When working few hours continuously win7 restarts instantly without showing any error. Sometimes after rebooting BSOD is appeared. Bu XP doesn't give a that kind of error.
Yesterday 9/26 for most of the day when I put the computer into 'sleep' mode it will stay there. Toward evening it would automatically come back. I tried the steps on sites (especially WiFi check to no avail.
I need to connect to a VPN in order to use my university's exchange email client.Does anybody know if I can define it to connect automatically when my system starts? As it is, I need to manually connect each time (which isn't that difficult, but I rather not having to do it).
My friend is having problems with her computer. When she boots up, after she logs in, all of the programs start on start up, then it runs for about 45 seconds, and then auto restarts. She's tried getting into Safe Mode via F8, but it just ignores the commands and goes to the log in screen. Whatever other information is needed, let me know.
Well i thought that turning off the option for auto restart when a system failure occurs would be a good idea so i could see a blue screen of death so i could determine the problem with my computer but it did nothing. My computer still restarts whenever.
I have been researching the problem Outlook 2010 has had with NOT remembering email addresses for the Auto complete after the program is shut down and restarted.
I usually consider myself having some idea about computers but this things is out of my league. [code] My computer has been getting BSOD'S for several days after installing java 7 update 8.I somehow managed to get system back on it's track for few times with cd/usb booting but now, when i start it i just get a black screen no beeps at all and back, gpu and cpu fans are working on max.Tried reseting bios with clr cmos button and taking the bios battery out but nothing helps.I thought it could be hardware error and as there was black screen i suspected the gpu which was making problems before the fan came off so I replaced it with accelero l2 pro.I don't think it's the mobo problem because when i remove both ram sticks i get like 8 beeps until it restarts and everything repeats.But on the other hand how could it be hardware problem if comp autorecovered bios.I also thought about flashing the bios but the boot is set to floppy so i am not sure how would that work out.
have been playing battlefield 3 since came out.no problems.but 3 days i think after i installed 285.79 nvidia beta drivers after ~15 minutes of playing computer freezes.even curson doesnt move..i only can restart..but i only noticed freezes during the game..and not always but most of restarts are followed by (i havent counted) ~8-10 beeps and computer opens..bios is award..i didnt find any beep codes for that since award has no that kind of beeps regarding to the internet..and the beeps doesnt come on post screen..it comes right after i push restart button...
I am having my pc shutting down randomly when I say this I mean a blank screen no BSOD and when I turn on my computer then go in to the event viewer I get the following:
Critical error: Kernel power 41 (63)
Alongwith a sidebyside 33 error with comes a few seconds before the power error, to give to background this wasn't happening before I download this game and installed it but I have done virus scans and nothing turns up i have even reformat and it stills continues to happen. This is actually the thing I download: [URL]. Actually the last time I had a virus scanner open I also had cpu-z and I was noticing that the cpu % of use was going up a lot from just that and then the temp kept going up as well at one point it was 80-90 degrees
Still trying to find out why the Ports, Coms, etc don't show anywhere in Device Manager. I noticed an old Post where it said to look in add/Remove Hardware. Where do I find this Add/Remove Hardware option? There was also a Post to check the BIOS for this and to see if PORTS is set to Auto. How to have the Ports show up in Device Manager.
This BSOD has been happening more regularly, sometimes after 30mins, other times after a couple of hours.If I try and restart it crashes shortly after Win 7 logo appears.Unless I disconnect the power for at least 15mins, it won't restart Windows - just re crashes.Have attached the dump and sysdata files - note that the two files are not always written.
What could be causing the following situation- When restarting my computer (Windows 7 64bit) after the "starting windows" screen appears the screen will go dark and display "power saving mode". After about 60 seconds the computer will restart from the "starting windows" screen and complete the restart process. Once it completes everything the computer runs fine.
I have made sure that the power settings in control panel have been set to "never" under advanced settings. About 4 months ago, windows decided to set my monitor shut off time to 20 minutes. The first time it happened, I figured it was a one-off thing, and set the monitor off setting back to "never". Fast forward 4 months, and I have to turn the setting to "never" every time I start my computer. I've even made custom power profiles, and every time I restart, the monitor off setting keeps going back to 20 minutes.