Power Outage Made Boot Up Time Ten Times Slower?
May 17, 2012
I literally just built this today and was able to enjoy a very fast boot up speed with wim7 64-bit installed on my ssd drive but the power cable of course found a way to get unplugged from the wall and now the it takes an extra 20-30 seconds in order t boot up (at the "windows starting" ) screen. Right after I turned it back on the computer wanted to go into system repair and then it reset the pc to the back up that I had just set,
Is there anything I can do in order to get it too boot up like it was at first?
View 2 Replies
ADVERTISEMENT
May 29, 2011
I made the huge mistake of booting my custom built machine during a storm and as luck would have it, the only time that the power was lost (for about 2 seconds) occurred at that time. Now my machine will not boot. Startup repair comes up and tells me that it could not find the problem and I must shut down. I have tried restoring, mem tests, hard drive tests, reseting my mobo to failsafe settings, booting from the windows 7 recovery disk, booting off of the original windows 7 install disk, forcefully kicking it and crying. Nothing has worked, however. No matter what method I use, even when successfully completed, I am still faced with the startup repair error. I built the PC myself, so I'm not a complete fool when it comes to computers.
View 1 Replies
View Related
Dec 10, 2012
There was a quick power outage and the computer was forced off. I rebooted and now after the windows logo there is a gray screen that remains a very long period of time before the desktop appears. I am able to move the mouse but that is the only functionality I have.
View 4 Replies
View Related
Nov 21, 2009
Boot time slower for 64 bit vs 32 bit ? I was running 32 bit and am now running 64 bit but the 64 bit seems to take longer to boot.
View 7 Replies
View Related
Sep 7, 2012
I have a spare pc with Windows 7 64bit professional (no SP1) on a ssd which I bought a year ago. Back then, it booted within 20sec or so. I noticed a slower boot time after the SP1 patch. So I assumed the patch slows the PC and so I went on with my life.
Now that I bought a new PC with a Windows 7 SP1 64bit professional DVD, I expected to have a slower boot time since SP1 was already added on the DVD. But to my surprise, it booted just as fast, around 17 sec on a fresh install. I rebooted and got the same 17 sec. Next, I updated the recommended patches. I did not install anything else that was optional, any MB drivers, GPU drivers, etc. Just plain recommended windows updates. Boot time went from 17 to 46 seconds. How can that be? If patches slow PCs, then the new DVD should have done so from the beginning.
View 1 Replies
View Related
Jan 18, 2013
About 2 weeks ago, I built a new computer from scratch and gave it some pretty awesome specs, especially for my budget ($1,000). Some basic specs are:
i5-3750k CPU
MSI GTX 660 O/C GPU
8GB of RAM
a 1TB 7200 RPM 6.0GB/s HDD
a 64 GB Samsung SSD
When I first started the computer, I was able to get from boot screen (the little MSI logo for my mainboard), to the Windows 7 login screen in a few seconds. I'm not sure exactly how long, but the little windows logo that appears when Windows loads didn't even finish appearing. The 4 parts of the windows met in the middle and then it was done.However, now, after 2 weeks of installing stuff, the boot time has gone up. Slightly. It went from about 8 seconds to 10-12 seconds (estimates!). To be honest, however, the boot time was pretty much the same until yesterday, and it was different this morning. The only thing that was changed was that I installed Google Drive.Also, just so you know, my SSD is pretty much exclusively a boot disk. All of my program files and user documents are stored on my HDD, allowing my SSD to be the "windows" disk. Like I said, my boot time has always been pretty fast, and I certainly am not complaining about it now - however, I've noticed and change, and don't want it to continually get worse, so I want to try to prevent it from happening in the future. By the way, I have taken multiple maintenance measures. Yesterday I ran a full virus scan on both disks, a defragment on the HDD (I know not to run one on the SSD), as well as run CCleaner to ensure that my startup isn't too long (It went up by 1 program : Google Drive).
View 4 Replies
View Related
Jun 25, 2012
Long story short, I have shares on three PCs that are not always on. If I make a shortcut to the share and put it on my desktop, sometimes for some reason, the shortcut vanishes. I believe this is because I haven't connected the PC to the network in a while.
So, I went about and mapped those shares to drive letters. All is well, however, it adds another 45 seconds to my boot time.
Pretty sure this is because windows is trying to reconnect to them on boot, but they are disconnected. Is there any way to keep my drive mappings, but not have windows attempt to reconnect on boot?
I know that you will lose your mappings if you do not check "reconnect on login".. so, is there a way to keep the mappings without attempting to reconnect at login?
View 2 Replies
View Related
Apr 2, 2012
I had a power outage a few days ago and went to turn on my pc again and it is telling me to install a OS cause now there is no OS so i tryed to format the hard drive and install a fresh copy of windows 7 64 bit but partition any of the 3 wont install on it and it tells me its the wrong format on one and i cannot change it..
View 1 Replies
View Related
May 24, 2012
I am hooked up to a UPS, but after that runs out and I am away, I sometimes need to remotely logon - in which case I need the computer on. If I need to change something in the BIOS, please give specifics of how to do this as I have looked in there and found nothing related to this.
View 9 Replies
View Related
Aug 13, 2012
This HP computer is running Windows 7 - 64 Professional, version 6.1, build 7601 Service Pack 1. The last time I had a normal start up was last Saturday after turning off all the computers and unplugging due to thunderstorm activity in the area. Yesterday morning, Sunday, we had 4-5 momentary power outages where the electricity pretty much flickered a few times, then stayed on. This computer did start up, but the start up process took approx 20 minutes.
I restored the computer to 3 days prior with no noticeable difference, ran defrag with no noticeable difference, and ran chkdsk, which did make a difference. The 1st start after the chkdsk was a normal quick start, then subsequent starts take approx 3-4 minutes, so it has slowed down again, but not near as bad as the original problem. The start up goes as follows:
1.) The normal Blue HP start up screen for approx 20 seconds, then,
2.) The windows graphic with the changing colored "windows" on the black background, then,
3.) a completely black screen for approx 2-3 minutes with minimal flashing of the HDD light, then
4.) proceed to Welcome to Windows screen where everything loads and the HDD light is pretty much steady. Within 30-40 seconds of getting to this point the normal desktop is up, icons are loaded, and computer is ready to use.
My step 3 noted above - the black screen, is usually 15-20 seconds max, so it seems whatever the hangup is is occuring during that time. After the start up is complete everything works normally. There isn't any abnormal use of memory or CPU usage.
View 1 Replies
View Related
Jun 7, 2011
Aside from the surge itself, what other negative effects could arise from experiencing an outage while multiple programs are open and running? For example, if I lost power while regedit was open, could it change or possibly cause damage the registry itself? The machine in question is currently running Win 7 SP1 64-bit.
View 6 Replies
View Related
Nov 4, 2012
I run windows 7 on a laptop (Asus G74SX) w an SSD and i forgot to connect it to the battery when i took a nap.Lately my battery is not in perfect state and when this happens, reconnecting the plug won't let me resume system, i have to restart windows 7 and get the message that windows improperly shut down etc etc.
View 1 Replies
View Related
Feb 19, 2012
I have been having a serious issue with my PC. The PC will boot up without incident, but if I try to access explorer or the OS, it will slow to a crawl and eventually freeze. I have encountered this with firefox, the start menu, and when trying to access the task manager. The problem is consistent, occuring everytime I start the machine. Usually within the first few minutes of a boot-up, Windows has frozen and I must force a hard reset.
The only thing I can think of which may be the cause is a power outage which occured in the night. When I woke up, the PC was off and the problem began as soon as I booted up. The PC was plugged into a power strip which was not tripped by the outage.
I can boot up in Safe Mode, which delays the onset of the crash, but doesn't stop it. I have tried using system restore by accessing the menu during start-up (F8) but the system restore always fails at the very end. Looking at the inside of the PC, there doesn't seem to be any visible damage (that I can detect) and at no points does anything seem to be giving off any excess heat.
When I press CTRL+ALT+DEL in an attempt to access the task manager, the screen goes black and the cursor turns to a wheel. After several minutes, the wheel will stop and a prompt will appear stating "The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."
View 6 Replies
View Related
Aug 18, 2012
Computer frozen on restore systems after power outage. I cannot use disc 2 reboot - all keyboard actions frozen. All I want to know is - would I have lost what's on my hard drive and how to be able 2 get it running again.
View 3 Replies
View Related
Apr 2, 2012
I had power outage reboot backgroud went back to default and so did the quick launch menu also some of my games act like i never played them before and have to re setup resolution and settings. Did some widows file get corrupt why did this happen?
View 6 Replies
View Related
Apr 11, 2012
Yesterday, there was a short power outage which caused my computer to force shut down. When I turned it on, the screen resolution was off, so I managed to fix it by hardware (the auto button on my monitor) since software-based fixing didn't work (which has managed to solve this problem in the past, at least I think it was the same problem). Anyway, after I did this, the icons were strange; bigger than usual, not e.g. 128x128 but rather 140x128 (that isn't the exact size but they were higher than they were wide). This is quite annoying. The circular icons have become ovals and the square icons have become rectangular. By the way, the same thing has, I think, happened to the taskbar as well. It's harder to tell with things other than icons, but it's visible. So basically, everything is slightly higher than wider than it should be, not only the icons.
View 3 Replies
View Related
May 24, 2012
I am hooked up to a UPS, but when that runs out and I am away, I sometimes need to be able to remotely logon to my computer. Is there a way to get the BIOS to automatically restart the computer after the UPS runs out when the power goes out?
View 3 Replies
View Related
Jan 17, 2013
I have a samsung npqx411w01 with i5 and 6gb, It also has NvidiaGeforce graphics with 1gb dedicated as I enjoy playing BF3. I have had this computer for about 6 months now, and its been great, but over time, despite antivirus/malware/disk cleanups. It just seems to be getting slower. I am at the point now where the audio sounds cracky, and even stutters, I cant play any games since there is a significant lag, as well as with streaming of any kind and Although I thought it may only be with the wifi, it is still limited with an Ethernet cable(the internet may be a separate problem). There was an incident nearly a month ago in which my system completely shut out. I couldn't open windows without safe mode or else I would get a windows error a few seconds after logging in. I was able to restore, but I feel things haven't been the same.
View 5 Replies
View Related
Jul 29, 2012
I've changed the setting of maximum processor state on battery from 100% to 50% to save battery. But the setting resets to default 100% time to time. I don't know why this is happening.
View 4 Replies
View Related
May 19, 2011
In bios (I have ASUS mb P5Q SE Plus) i can setup the pc to automatically power on at 1 certain time, does anyone know if its possible at all to setup more than 1 autopower on time either through bios or some application (free)?
View 4 Replies
View Related
May 31, 2012
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
View 1 Replies
View Related
Mar 18, 2012
I just reinstalled Windows 7 and added a new motherboard and cpu. I've been getting BSOD all day and it seems to be the same few errors every time, but at different intervals. I've attached a crash report from BlueScreenView.
View 9 Replies
View Related
Jan 9, 2010
I'm hoping you can help me unwind an annoying performance issue I've uncovered in Windows 7; one that doesn't seem to be documented at all if the Google is to be believed.
I recently upgraded my laptop (a Lenovo T60p, C2D T7200 proc, 2GB RAM, ATI X1400) with both a new SSD (an OCZ Vertex 60 GB) and Windows 7 Pro x64. Performance and stability has been terrific. Especially that sub-30-second boot time!
Initially, I had desktop composition disabled, so that Windows 7 was running without the Desktop Windows Manager. I just recently enabled it when I discovered that it's pretty damn sexy, and had little impact on battery life (if anything, it seems to have gotten better).
However, now my laptop takes much longer to boot - about an additional 30 seconds or so following the Windows login screen. When I disable DWM, it goes back to booting quickly. Now I realize you can't get something for nothing, but 30 seconds for a single process? A fairly lightweight process that you can enable instantly in the desktop environment? My hunch is that that just isn't right - something is interacting badly. Thus my questions are:
1. Does anyone know if this is normal behavior for DWM?
2. Is there anything I can do to address this?
3. Or, is there a good forum/online resource where I could post this (rather esoteric) question?
View 1 Replies
View Related
Aug 2, 2012
i secure erased my SSD which was set to IDE, and re-installed windows 7 on the new AHCI setting instead.Now windows takes x2 (twice) as long to BOOT up, with the circle going round and round and round for about 30 seconds (instead of the previous 8-10 seconds in IDE.
View 1 Replies
View Related
Jul 14, 2011
So my desktop computer had a nasty virus or something on it, and it was originally a 32-bit Windows 7 Home Premium (as it came with the computer).To get rid of it, I decided to wipe the whole HDD and install a clean Windows 7 Ultimate. But I noticed that the boot time for computer now is MUCH slower now. Before on the Home Premium it would only hang at the "Welcome" screen for only about 5 seconds, then go straight to the desktop and I would be able to use it within minutes. Total boot time: probably under a minute.Now on Ultimate, it hangs on the "Welcome" screen for about 30 seconds, then takes another 10 seconds before I can do anything. Total boot time: 1.5 or 2 minutes.I've tried disabling some of the startup programs and ran a clean boot, but nothign wouthe boot time as fast as it was before. I know that Ultimate has a lot more features, does that explain the extra boot time?
View 1 Replies
View Related
Aug 31, 2010
I created a new partition, and accidentally made it my primary partition (C: being my primary one and D: being by other one) now whenever I boot up I get NTLDR missing ctrl+alt+del to restart. So I downloaded the windows 7 repair files from one website and tried to fix it, but I failed and now I wanted to know is there any other way I can fix using command prompt or will I just have to reinstall windows 7.
View 4 Replies
View Related
Sep 2, 2012
OS installed on SDD ..(Windows 7 Ultimate 64bit) I have a seperate 1TB HDD installed - partioned into 2 volumes. (D & E) I would like that the OS puts all programs by default onto D:I know some programs give you option to select location but not all ... can I setup that 'progam' folder is on D.
View 8 Replies
View Related
Feb 25, 2012
I have had this issue for a while with my Dell Studio XPS 1645 laptop. It is a guess, but i'd say 5/10 times the power cord comes out of the laptop (for whatever reason - moving it etc) then the laptop will simply black screen and instantly restart and boot up again without an error message or any information as to why. This doesn't make any sense to me because every time I do have the battery pack inserted into the laptop and over 30% battery life (this is when ill plug the charger in).
View 4 Replies
View Related
Nov 16, 2011
If the computer is shut down and disconnected from the power supply for about 5 hours or longer I get a bluescreen right after the windows boot screen. Otherwise it starts without problems and works fine. My workaround for the problem after long shut down is to switch on the power supply, then immediately switch it off and then on again. This works always fine!
My System:
Windows 7 Home Premium 64bit SP1
AMD Phenom II X6 1090T Black Edition Asus M4A89GTD PRO/USB3 4GB (2x2) 1333-777 RAM ATI Radeon HD 5570
Blue Screen: *** STOP: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)
I already used all of the windows debugging, diagnostic tools and Memtest but without success.
View 8 Replies
View Related
Nov 17, 2009
PC: Eee PC 900HA
OS: Windows 7 Home Premium 32bit
Disk: G.Skill Falcon 64GB SSD
So, long story short, I reformated my Eee PC because I couldn't run WEI after the first time. Boot times were great (a bar and a half at the 7 boot logo). However, I installed Daemon Tools Lite and this went up to 5 and a half bars while booting. I am speed obsessed. So, I uninstalled this software and boot times are the same. How can I fix this?
View 5 Replies
View Related
Mar 30, 2012
Slow Boot Times with a SSD?
View 4 Replies
View Related