Won't Install OS After Power Outage

Apr 2, 2012

I had a power outage a few days ago and went to turn on my pc again and it is telling me to install a OS cause now there is no OS so i tryed to format the hard drive and install a fresh copy of windows 7 64 bit but partition any of the 3 wont install on it and it tells me its the wrong format on one and i cannot change it..

View 1 Replies


ADVERTISEMENT

Can't Boot After Power Outage

May 29, 2011

I made the huge mistake of booting my custom built machine during a storm and as luck would have it, the only time that the power was lost (for about 2 seconds) occurred at that time. Now my machine will not boot. Startup repair comes up and tells me that it could not find the problem and I must shut down. I have tried restoring, mem tests, hard drive tests, reseting my mobo to failsafe settings, booting from the windows 7 recovery disk, booting off of the original windows 7 install disk, forcefully kicking it and crying. Nothing has worked, however. No matter what method I use, even when successfully completed, I am still faced with the startup repair error. I built the PC myself, so I'm not a complete fool when it comes to computers.

View 1 Replies View Related

How To Get Auto-restart After Power Outage

May 24, 2012

I am hooked up to a UPS, but after that runs out and I am away, I sometimes need to remotely logon - in which case I need the computer on. If I need to change something in the BIOS, please give specifics of how to do this as I have looked in there and found nothing related to this.

View 9 Replies View Related

Windows 7 SP1 - Slow Start Up After Power Outage

Aug 13, 2012

This HP computer is running Windows 7 - 64 Professional, version 6.1, build 7601 Service Pack 1. The last time I had a normal start up was last Saturday after turning off all the computers and unplugging due to thunderstorm activity in the area. Yesterday morning, Sunday, we had 4-5 momentary power outages where the electricity pretty much flickered a few times, then stayed on. This computer did start up, but the start up process took approx 20 minutes.

I restored the computer to 3 days prior with no noticeable difference, ran defrag with no noticeable difference, and ran chkdsk, which did make a difference. The 1st start after the chkdsk was a normal quick start, then subsequent starts take approx 3-4 minutes, so it has slowed down again, but not near as bad as the original problem. The start up goes as follows:

1.) The normal Blue HP start up screen for approx 20 seconds, then,
2.) The windows graphic with the changing colored "windows" on the black background, then,
3.) a completely black screen for approx 2-3 minutes with minimal flashing of the HDD light, then
4.) proceed to Welcome to Windows screen where everything loads and the HDD light is pretty much steady. Within 30-40 seconds of getting to this point the normal desktop is up, icons are loaded, and computer is ready to use.

My step 3 noted above - the black screen, is usually 15-20 seconds max, so it seems whatever the hangup is is occuring during that time. After the start up is complete everything works normally. There isn't any abnormal use of memory or CPU usage.

View 1 Replies View Related

Power Outage With Multiple Programs Running

Jun 7, 2011

Aside from the surge itself, what other negative effects could arise from experiencing an outage while multiple programs are open and running? For example, if I lost power while regedit was open, could it change or possibly cause damage the registry itself? The machine in question is currently running Win 7 SP1 64-bit.

View 6 Replies View Related

Power Outage Then Gray Screen On Boot?

Dec 10, 2012

There was a quick power outage and the computer was forced off. I rebooted and now after the windows logo there is a gray screen that remains a very long period of time before the desktop appears. I am able to move the mouse but that is the only functionality I have.

View 4 Replies View Related

Windows 7 Applications Slow After Power Outage

Nov 4, 2012

I run windows 7 on a laptop (Asus G74SX) w an SSD and i forgot to connect it to the battery when i took a nap.Lately my battery is not in perfect state and when this happens, reconnecting the plug won't let me resume system, i have to restart windows 7 and get the message that windows improperly shut down etc etc.

View 1 Replies View Related

[CRASH] Windows Consistently Freezing After Power Outage

Feb 19, 2012

I have been having a serious issue with my PC. The PC will boot up without incident, but if I try to access explorer or the OS, it will slow to a crawl and eventually freeze. I have encountered this with firefox, the start menu, and when trying to access the task manager. The problem is consistent, occuring everytime I start the machine. Usually within the first few minutes of a boot-up, Windows has frozen and I must force a hard reset.

The only thing I can think of which may be the cause is a power outage which occured in the night. When I woke up, the PC was off and the problem began as soon as I booted up. The PC was plugged into a power strip which was not tripped by the outage.

I can boot up in Safe Mode, which delays the onset of the crash, but doesn't stop it. I have tried using system restore by accessing the menu during start-up (F8) but the system restore always fails at the very end. Looking at the inside of the PC, there doesn't seem to be any visible damage (that I can detect) and at no points does anything seem to be giving off any excess heat.

When I press CTRL+ALT+DEL in an attempt to access the task manager, the screen goes black and the cursor turns to a wheel. After several minutes, the wheel will stop and a prompt will appear stating "The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."

View 6 Replies View Related

Computer Frozen On Restore System After Power Outage

Aug 18, 2012

Computer frozen on restore systems after power outage. I cannot use disc 2 reboot - all keyboard actions frozen. All I want to know is - would I have lost what's on my hard drive and how to be able 2 get it running again.

View 3 Replies View Related

Power Outage Reboot Background Went Back To Default?

Apr 2, 2012

I had power outage reboot backgroud went back to default and so did the quick launch menu also some of my games act like i never played them before and have to re setup resolution and settings. Did some widows file get corrupt why did this happen?

View 6 Replies View Related

Screen Has Slightly Warped Since Short Power Outage?

Apr 11, 2012

Yesterday, there was a short power outage which caused my computer to force shut down. When I turned it on, the screen resolution was off, so I managed to fix it by hardware (the auto button on my monitor) since software-based fixing didn't work (which has managed to solve this problem in the past, at least I think it was the same problem). Anyway, after I did this, the icons were strange; bigger than usual, not e.g. 128x128 but rather 140x128 (that isn't the exact size but they were higher than they were wide). This is quite annoying. The circular icons have become ovals and the square icons have become rectangular. By the way, the same thing has, I think, happened to the taskbar as well. It's harder to tell with things other than icons, but it's visible. So basically, everything is slightly higher than wider than it should be, not only the icons.

View 3 Replies View Related

Change The BIOS For Auto Restart After Power Outage

May 24, 2012

I am hooked up to a UPS, but when that runs out and I am away, I sometimes need to be able to remotely logon to my computer. Is there a way to get the BIOS to automatically restart the computer after the UPS runs out when the power goes out?

View 3 Replies View Related

Power Outage Made Boot Up Time Ten Times Slower?

May 17, 2012

I literally just built this today and was able to enjoy a very fast boot up speed with wim7 64-bit installed on my ssd drive but the power cable of course found a way to get unplugged from the wall and now the it takes an extra 20-30 seconds in order t boot up (at the "windows starting" ) screen. Right after I turned it back on the computer wanted to go into system repair and then it reset the pc to the back up that I had just set,

Is there anything I can do in order to get it too boot up like it was at first?

View 2 Replies View Related

Home Network Intermittent Internal Outage?

Oct 11, 2012

I have a wifi home network with several devices (laptops, all but one are Windows 7, and a wireless printer) connected through a dsl modem/router (a NexusLink 5631) to each other and to the internet. The laptops can all access shared folders on each others' hard drives, and all can print wirelessly to the printer. Until ... after a few days of happy camping suddenly none of the devices can 'see' each other (can no longer find any other device on the network) and none of the laptops can access the wireless printer. However, internet access is never disrupted; each laptop can still happily surf the net no problem.I am somehow able to rectify the problem by rebooting the dsl modem/router, updating the connection settings on the printer, going back and doing it again, turning round three times and twitching my nose ... after fiddling for a while to no good end everything comes back as it should. And I don't know why.I have contacted my dsl provider (Frontier, in Ohio) who own the modem/router and they say it's nothing to do with them. As long as I have internet access they're not interested.I called them because, interestingly, all this only happened when I switched from my old) cable provider to the dsl provider. When I had the old cable modem/router this issue never occured.

View 4 Replies View Related

How To Install Power-Tab Editor

Aug 14, 2011

i have problem installing the power-tab editor.After i downloaded from CNET i got a file "cnet_powertab_zip.exe".If i double click and try to install i get an Install error: "Unable to initialize installer GUI".If i try to rename to exe to zip in order to extract it, it wont work at all.

View 5 Replies View Related

Power Went Out During Install, Can't Complete Now?

Aug 3, 2011

Last night I was upgrading from Vista to Windows 7 via download off of the microsoft site (so I do NOT have a startup disc). As the computer was in the middle of a restart, I lost power during a storm last night.Now when I turn the computer on, it gets past the "Starting Windows" screen and to the point where I can see a default desktop image, but I never actually see the desktop. Instead of seeing the taskbar or any shortcuts, it just brings up a DOS prompt and I have no idea what to do from there or how to get it to restart the install or pick up where it left off.

I'm at a friends house posting this, so I don't have all my computer specs, but I know it is completely Windows 7-compatible.

View 6 Replies View Related

Install Windows 7 On Mac Power-PC G4?

Sep 25, 2011

i recently sourced a macPowerPC G4 ,im an ardent windows user and was wondering if there was any way i could install Windows 7 on it as a stand alone without virtual machines holding it.

View 1 Replies View Related

Driver State Power Error On Install

Apr 14, 2009

Could anybody help me out with this or point me in the right direction?

Whenever I try and install Windows 7 build 7068 or 7077 the installation process freezes and after a while i get a "DRIVER_STATE_POWER_ERROR", If I then restart the machine the installation process starts up again but just hangs.

I have tried this with both a clean install and an upgrade and I get the same thing.

However, build 7000 and build 7057 install fine.

I am using a gigabyte GA-E7AUM-DS2H motherboard with the Nvidia 9400 chipset with a mirrored RAID configuration on two of the hard disks. The windows partition is on a non raided disk. The video is outputted via HDMI and the audio via optical to my AV reciever (Harman Kardon AVR-255)

also another thing, build 7057 seems to work fine as I am using it only as media center. HD video, dixv, mp3, recorded and live TV are all fine in media center and the configuration to pass DOLBY, DTS and AC3 5.1 surround sound to my AV reciever works perfectly. However, whenever I try to play a DVD, the screen stutters and flickers every few seconds as though the signal is lost. If i plug the HDMI cable directly in to my samsung plasma, the problem goes away!

If this was happening with all video I could put it down to the nvidia drivers not sending a correctly formatted signal, but it is only with DVD playback. I have tried the drivers which were installed automatically with win7 and the nvidia windows 7 beta drivers and I still get the same problem.

View 6 Replies View Related

Power Option PCI Express Link State Power Mgmt?

Jun 27, 2012

I've done a lot of searches using variations of the above title and came up empty or just plain missed the answer.I'd like to know, if it is not asking too much, the following points:

1. What exactly is the function of Link State Power Management in the Power Options Advanced Settings, PCI Express?

2. What are the implications of using the options available:

a) Off.

b) Maximum power savings.

c) Moderate power savings.

d) Which option is the best selection for my Dell laptop.

View 3 Replies View Related

Setting Can Change To Shut Off Power To USB Buses / When Power Off PC?

Jun 9, 2011

I use my PC for audio production and I have a few external controller devices that are USB powered, for example a midi keyboard. I recently had to build PC due to a theft....long story short after building the new PC I've noticed that my USB buses have continual power to these external devices after I've powered down the PC. My old windows 7 PC did not do this. Is there a setting I can change to shut off power to the USB buses when I power off the PC? Or is this a hardware issue?

View 1 Replies View Related

The 'Do Nothing' Option For Power Button In System Power Options?

Jun 16, 2012

i've tried to set the option for pressing the power button to 'Do Nothing' so no body can shut the computer, and yet it shuts down by pressing the button, so why is that and how can i work this out?

View 1 Replies View Related

Random Power Off / Power On / Reboot Events

May 2, 2012

Over the past 2 years my PC has been afflicted with random power off/power on/reboot events.It will go for months without these and then have multiples of the events in a day. (I had 8 of them 3 days ago.)I assume I have a hardware problem, but nothing has been found and I'm grasping at straws.The time between power off and power on is several seconds.I had assumed this rules out a software cause, but maybe I'm wrong. I know Windows can schedule a power off, but can it tell BIOS (or something) to power back on in a few seconds?I know blaming the power supply is a much more simple explanation, but then I'm left with explaining the intermittent nature of the failure.

View 9 Replies View Related

Power Icon Disabled Even If Laptop Is Not An AC Power

Dec 23, 2010

From many days the battery icon is missing from the taskbar, the notification icon is greyed out even if the laptop is not on AC. i followed the the tutorial System Icons - Enable or Disable but nothing happened.

View 3 Replies View Related

Computer Won't Power On After Power Loss

Mar 17, 2012

My computer wouldn't shut down, even with holding in the power button, and so I just let it run out the battery. Then it wont turn on. I tried holding down the power button to clear out any charge that might be remaining. I have managed to get it back on, but I have to make a connection at the clip where you plug the power button ribbon into the mobo. Also, this is the second time I have had to do this. The computer works fine afterwards...or seems to anyway.

View 1 Replies View Related

Pc Power Up Without Press Power Button?

Oct 23, 2012

Suddenly pc doesnt boot up we change with new psu and from that time pc power up by the time we connect the psu with power ,

i remove all cables i left connection psu with motherboard but still the pc power up by him self , i remove the cpu and then didnt power up ..

View 1 Replies View Related

Hp Laptop Not Getting Power To The Power Button

Jan 27, 2013

My daughter has a Hp laptop and it was working fine, but the screen was coming apart. so my husband put it back together, Now it will not come on. It's getting some power but not coming on at the power button. The lights flashes when you push the button then nothing.

View 1 Replies View Related

Power Plan - Create Shortcut To Change Power Plan

Aug 23, 2009

How to Create a Shortcut to Change Power Plans in Windows 7 ?

View 0 Replies View Related

No Power To Pc

Oct 22, 2011

lately when pc went to sleep it would not wake up unless i turned the power off and then turned it back on again, then the other night i turned it off and now it will not start at all, at first the light lit for a few seconds then went out, but now there is nothing at all, just no power.The pc is a Medion desktop MT7 447G, about three years old.

View 3 Replies View Related

[POWER] Itunes Are Using All Cpu?

Dec 30, 2011

i got real problems this time,my laptop acer 7736z,its using too much cpu allmost 100% all the time,and the issue has started after i installed Itunes,i was trying to transfer music to a freind. BUT it will not syncronize itunes with the ipod,or it will,but there it stops,and my pc is not responding at all,i should mention that my OS is window 7 home premium 64bit and my anti-virus is mcafee total protection 2012.

View 2 Replies View Related

Power Setting Changes Itself?

Dec 2, 2011

I've been having this trouble on my laptop where the power setting just changes at will. I usually put it at power saving when i use it to write but it just takes 10-20 seconds before it by itself changes to High performance.

View 1 Replies View Related

Pc Won't Boot After Power Cut Off

Mar 6, 2011

I have updated my bios from f5 to f8k (latest version downloaded from gigabyte)the reason i have done this is because i want to upgrade my cpu to a phenom 2 955\965 and the latest version allows am3 cpusi have downloaded the latest version,upgraded the first time with @bios from windows (i know that was not wise but i didnt knew at that time)-restart--Computer didnt boot.Cleared cmos,entered bios -qflash- installed the old bios,everything back to normal.After that i tried upgrading to newest version with qflash.Upgrading went fine,restarted,loading factory settings in bios,rerstart,loading os,cpu-z showing the new verrsion of bios - f8k.the big PROBLEM is that every time i unplug the power cord from the psu,or just hit the on\off button on the back of the psu,the computer wont boot anymore.Fans come on,hard drive comes on and the cdrom is making a sound as the system would restart over and over again.IF i clear the cmos with the jumper,computer boots,everything is fine, but after power is cut it wont boot again until i reset cmos.I flashed bios again to the old version(f5) and the problem dissapeares.After that i tried flashing again,I tried every version but they all have the same problem.i teared the computer apart,checked everything inside,left only 1 stick of ram,video card and cpu cooler,still experiencing the same problem.what is the problem? i even wrote to gigabyte,they told me to:1) Turn off power.2) Remove the power cord from the PSU.3) Take out the battery gently and put it aside for about 5 minutes or longer. (Or you can use a metal object to connect the two pins in the battery holder to make them short-circuited.)4) Re-insert the battery to the battery holder.5) Connect power cord to PSU again and turn on power.6) Power on your system.7) If BIOS can POST, please enter the BIOS and load the fail-safe defaults setting.8) Save changes and reboot the system.I followed these steps exactly as they are written,no joy.I even brought the pc to an "expert" he couldnt help either,he told me i have bad luck.Thats a really bad joke!I really want to upgrade the proc and i dont want to buy a new mobo,i like this very much here are my system specs:phenom 9650 with zalman 9700 ntgigabyte 750a sli mobogigabyte gts 450 (planning to add a second one)2x 2gb kingmax 1066seagate barracuda 7200.12 - 1 tbarctic cooling fusion 550r - 500w,550 peakaerocool modern-v fan controller,3 fanswindows 7 ultimate 64 and windows xp 64 edition (i'm using it just for the horizontal span when i game,i have two 24" monitors)mobo and bios url...

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved