Can't Boot After Power Outage
May 29, 2011
I made the huge mistake of booting my custom built machine during a storm and as luck would have it, the only time that the power was lost (for about 2 seconds) occurred at that time. Now my machine will not boot. Startup repair comes up and tells me that it could not find the problem and I must shut down. I have tried restoring, mem tests, hard drive tests, reseting my mobo to failsafe settings, booting from the windows 7 recovery disk, booting off of the original windows 7 install disk, forcefully kicking it and crying. Nothing has worked, however. No matter what method I use, even when successfully completed, I am still faced with the startup repair error. I built the PC myself, so I'm not a complete fool when it comes to computers.
View 1 Replies
ADVERTISEMENT
Dec 10, 2012
There was a quick power outage and the computer was forced off. I rebooted and now after the windows logo there is a gray screen that remains a very long period of time before the desktop appears. I am able to move the mouse but that is the only functionality I have.
View 4 Replies
View Related
May 17, 2012
I literally just built this today and was able to enjoy a very fast boot up speed with wim7 64-bit installed on my ssd drive but the power cable of course found a way to get unplugged from the wall and now the it takes an extra 20-30 seconds in order t boot up (at the "windows starting" ) screen. Right after I turned it back on the computer wanted to go into system repair and then it reset the pc to the back up that I had just set,
Is there anything I can do in order to get it too boot up like it was at first?
View 2 Replies
View Related
Apr 2, 2012
I had a power outage a few days ago and went to turn on my pc again and it is telling me to install a OS cause now there is no OS so i tryed to format the hard drive and install a fresh copy of windows 7 64 bit but partition any of the 3 wont install on it and it tells me its the wrong format on one and i cannot change it..
View 1 Replies
View Related
May 24, 2012
I am hooked up to a UPS, but after that runs out and I am away, I sometimes need to remotely logon - in which case I need the computer on. If I need to change something in the BIOS, please give specifics of how to do this as I have looked in there and found nothing related to this.
View 9 Replies
View Related
Aug 13, 2012
This HP computer is running Windows 7 - 64 Professional, version 6.1, build 7601 Service Pack 1. The last time I had a normal start up was last Saturday after turning off all the computers and unplugging due to thunderstorm activity in the area. Yesterday morning, Sunday, we had 4-5 momentary power outages where the electricity pretty much flickered a few times, then stayed on. This computer did start up, but the start up process took approx 20 minutes.
I restored the computer to 3 days prior with no noticeable difference, ran defrag with no noticeable difference, and ran chkdsk, which did make a difference. The 1st start after the chkdsk was a normal quick start, then subsequent starts take approx 3-4 minutes, so it has slowed down again, but not near as bad as the original problem. The start up goes as follows:
1.) The normal Blue HP start up screen for approx 20 seconds, then,
2.) The windows graphic with the changing colored "windows" on the black background, then,
3.) a completely black screen for approx 2-3 minutes with minimal flashing of the HDD light, then
4.) proceed to Welcome to Windows screen where everything loads and the HDD light is pretty much steady. Within 30-40 seconds of getting to this point the normal desktop is up, icons are loaded, and computer is ready to use.
My step 3 noted above - the black screen, is usually 15-20 seconds max, so it seems whatever the hangup is is occuring during that time. After the start up is complete everything works normally. There isn't any abnormal use of memory or CPU usage.
View 1 Replies
View Related
Jun 7, 2011
Aside from the surge itself, what other negative effects could arise from experiencing an outage while multiple programs are open and running? For example, if I lost power while regedit was open, could it change or possibly cause damage the registry itself? The machine in question is currently running Win 7 SP1 64-bit.
View 6 Replies
View Related
Nov 4, 2012
I run windows 7 on a laptop (Asus G74SX) w an SSD and i forgot to connect it to the battery when i took a nap.Lately my battery is not in perfect state and when this happens, reconnecting the plug won't let me resume system, i have to restart windows 7 and get the message that windows improperly shut down etc etc.
View 1 Replies
View Related
Feb 19, 2012
I have been having a serious issue with my PC. The PC will boot up without incident, but if I try to access explorer or the OS, it will slow to a crawl and eventually freeze. I have encountered this with firefox, the start menu, and when trying to access the task manager. The problem is consistent, occuring everytime I start the machine. Usually within the first few minutes of a boot-up, Windows has frozen and I must force a hard reset.
The only thing I can think of which may be the cause is a power outage which occured in the night. When I woke up, the PC was off and the problem began as soon as I booted up. The PC was plugged into a power strip which was not tripped by the outage.
I can boot up in Safe Mode, which delays the onset of the crash, but doesn't stop it. I have tried using system restore by accessing the menu during start-up (F8) but the system restore always fails at the very end. Looking at the inside of the PC, there doesn't seem to be any visible damage (that I can detect) and at no points does anything seem to be giving off any excess heat.
When I press CTRL+ALT+DEL in an attempt to access the task manager, the screen goes black and the cursor turns to a wheel. After several minutes, the wheel will stop and a prompt will appear stating "The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."
View 6 Replies
View Related
Aug 18, 2012
Computer frozen on restore systems after power outage. I cannot use disc 2 reboot - all keyboard actions frozen. All I want to know is - would I have lost what's on my hard drive and how to be able 2 get it running again.
View 3 Replies
View Related
Apr 2, 2012
I had power outage reboot backgroud went back to default and so did the quick launch menu also some of my games act like i never played them before and have to re setup resolution and settings. Did some widows file get corrupt why did this happen?
View 6 Replies
View Related
Apr 11, 2012
Yesterday, there was a short power outage which caused my computer to force shut down. When I turned it on, the screen resolution was off, so I managed to fix it by hardware (the auto button on my monitor) since software-based fixing didn't work (which has managed to solve this problem in the past, at least I think it was the same problem). Anyway, after I did this, the icons were strange; bigger than usual, not e.g. 128x128 but rather 140x128 (that isn't the exact size but they were higher than they were wide). This is quite annoying. The circular icons have become ovals and the square icons have become rectangular. By the way, the same thing has, I think, happened to the taskbar as well. It's harder to tell with things other than icons, but it's visible. So basically, everything is slightly higher than wider than it should be, not only the icons.
View 3 Replies
View Related
May 24, 2012
I am hooked up to a UPS, but when that runs out and I am away, I sometimes need to be able to remotely logon to my computer. Is there a way to get the BIOS to automatically restart the computer after the UPS runs out when the power goes out?
View 3 Replies
View Related
Oct 11, 2012
I have a wifi home network with several devices (laptops, all but one are Windows 7, and a wireless printer) connected through a dsl modem/router (a NexusLink 5631) to each other and to the internet. The laptops can all access shared folders on each others' hard drives, and all can print wirelessly to the printer. Until ... after a few days of happy camping suddenly none of the devices can 'see' each other (can no longer find any other device on the network) and none of the laptops can access the wireless printer. However, internet access is never disrupted; each laptop can still happily surf the net no problem.I am somehow able to rectify the problem by rebooting the dsl modem/router, updating the connection settings on the printer, going back and doing it again, turning round three times and twitching my nose ... after fiddling for a while to no good end everything comes back as it should. And I don't know why.I have contacted my dsl provider (Frontier, in Ohio) who own the modem/router and they say it's nothing to do with them. As long as I have internet access they're not interested.I called them because, interestingly, all this only happened when I switched from my old) cable provider to the dsl provider. When I had the old cable modem/router this issue never occured.
View 4 Replies
View Related
Mar 6, 2011
I have updated my bios from f5 to f8k (latest version downloaded from gigabyte)the reason i have done this is because i want to upgrade my cpu to a phenom 2 955\965 and the latest version allows am3 cpusi have downloaded the latest version,upgraded the first time with @bios from windows (i know that was not wise but i didnt knew at that time)-restart--Computer didnt boot.Cleared cmos,entered bios -qflash- installed the old bios,everything back to normal.After that i tried upgrading to newest version with qflash.Upgrading went fine,restarted,loading factory settings in bios,rerstart,loading os,cpu-z showing the new verrsion of bios - f8k.the big PROBLEM is that every time i unplug the power cord from the psu,or just hit the on\off button on the back of the psu,the computer wont boot anymore.Fans come on,hard drive comes on and the cdrom is making a sound as the system would restart over and over again.IF i clear the cmos with the jumper,computer boots,everything is fine, but after power is cut it wont boot again until i reset cmos.I flashed bios again to the old version(f5) and the problem dissapeares.After that i tried flashing again,I tried every version but they all have the same problem.i teared the computer apart,checked everything inside,left only 1 stick of ram,video card and cpu cooler,still experiencing the same problem.what is the problem? i even wrote to gigabyte,they told me to:1) Turn off power.2) Remove the power cord from the PSU.3) Take out the battery gently and put it aside for about 5 minutes or longer. (Or you can use a metal object to connect the two pins in the battery holder to make them short-circuited.)4) Re-insert the battery to the battery holder.5) Connect power cord to PSU again and turn on power.6) Power on your system.7) If BIOS can POST, please enter the BIOS and load the fail-safe defaults setting.8) Save changes and reboot the system.I followed these steps exactly as they are written,no joy.I even brought the pc to an "expert" he couldnt help either,he told me i have bad luck.Thats a really bad joke!I really want to upgrade the proc and i dont want to buy a new mobo,i like this very much here are my system specs:phenom 9650 with zalman 9700 ntgigabyte 750a sli mobogigabyte gts 450 (planning to add a second one)2x 2gb kingmax 1066seagate barracuda 7200.12 - 1 tbarctic cooling fusion 550r - 500w,550 peakaerocool modern-v fan controller,3 fanswindows 7 ultimate 64 and windows xp 64 edition (i'm using it just for the horizontal span when i game,i have two 24" monitors)mobo and bios url...
View 14 Replies
View Related
Nov 7, 2012
how to install windows hoping that it would fix a problem he has recently had, He was updating his system and a power cut happened, and his laptop turned off. When he boots up, he gets to options, Start windows Normally, Launch Startup repair, He asked me if i could fresh install windows as that may help, When I try this, the system freezes at Setup is starting, If I run startup repair, I get error 0xc00000e9 (Error communicating with device) If I start windows normally, goes to starting windows, then the same error
I am guessing the hard drive failed, but I want to make sure before telling him.
View 4 Replies
View Related
Sep 9, 2011
I was among the 1.4 million SDG&E customers that lost power on Sept 8, 2011. At around 10:30PM the power came back on and I attempted to boot up my Win 7 machine (which was on at the time of the outage). It gets through POST, displaying the list of auto detected devices, clears that screen to black and then displays a flashing white caret on the black background and gets stuck there.Any ideas on how to restore without re-installing Win 7 (and everything else)?
View 3 Replies
View Related
Sep 14, 2011
I just received a computer I bought about a week ago, yesterday. Last night, while it was on and downloading files, the power board it was plugged into shut off. Now, it's stuck in an endless loop of failing to boot. It keeps asking me to insert the Windows 7 installation disc and restart. I put the disc in but it stays stuck in the loop and I am unable to do anything. I've managed to get it to go to the system repair setup, but it continued to try to repair the problems for over 6 hours and nothing has happened.
View 5 Replies
View Related
Oct 12, 2009
Issue: On bootup or back from power save, the screen resolution is at the basic 1024 x 768. When I go into the Screen Resolution screen, the Monitor drop down has Generic PnP Monitor. I press Detect and poof . . . My monitor name appears in the drop down and the monitor resolution has set to 1280 x 1024. After that it is fine.
I've downloaded and installed the latest Vista Nvidia drivers. There are no Windows 7 drivers. There is a monitor driver, but its so old that Win 7 will not recognize it. The monitor is from 2001/2002 timeframe.
Any thoughts what I can do to make the resolution "stick"?
View 4 Replies
View Related
Jul 2, 2012
My laptop wouldn't boot yesterday, the fan came on and the 'on' led came one, it beeped when I plugged in the charger but nothing on the screen and no post beeps etc. I let the battery drain fully, plugged it back in once it powered off and it booted fine. I shut it down last night and it did the same today on boot up, nothing. Again, discharging the battery fully brought it back.
View 4 Replies
View Related
May 7, 2012
OS: Windows 7 Home Premium x64
i7-2600K CPU @ 3.40 Ghz
OEM
8Gb RAM
Asus P8P67Pro
Harware & software build around 6 months old
BIOS, Windows updates and Driver updates applied regularly.
A couple of weeks ago i had a BSOD. Since, when trying to boot, most of the time my monitor turns ON, OFF, ON, OFF, etc...for some time, very rarely leading to a successful boot. No problem accessing Recovery options or BIOS.sometimes (very rarely), it does boot up normally.I have tried everything i can think of (with my limited knowledge).
View 5 Replies
View Related
Jun 27, 2012
I've done a lot of searches using variations of the above title and came up empty or just plain missed the answer.I'd like to know, if it is not asking too much, the following points:
1. What exactly is the function of Link State Power Management in the Power Options Advanced Settings, PCI Express?
2. What are the implications of using the options available:
a) Off.
b) Maximum power savings.
c) Moderate power savings.
d) Which option is the best selection for my Dell laptop.
View 3 Replies
View Related
Jun 9, 2011
I use my PC for audio production and I have a few external controller devices that are USB powered, for example a midi keyboard. I recently had to build PC due to a theft....long story short after building the new PC I've noticed that my USB buses have continual power to these external devices after I've powered down the PC. My old windows 7 PC did not do this. Is there a setting I can change to shut off power to the USB buses when I power off the PC? Or is this a hardware issue?
View 1 Replies
View Related
Jun 16, 2012
i've tried to set the option for pressing the power button to 'Do Nothing' so no body can shut the computer, and yet it shuts down by pressing the button, so why is that and how can i work this out?
View 1 Replies
View Related
May 2, 2012
Over the past 2 years my PC has been afflicted with random power off/power on/reboot events.It will go for months without these and then have multiples of the events in a day. (I had 8 of them 3 days ago.)I assume I have a hardware problem, but nothing has been found and I'm grasping at straws.The time between power off and power on is several seconds.I had assumed this rules out a software cause, but maybe I'm wrong. I know Windows can schedule a power off, but can it tell BIOS (or something) to power back on in a few seconds?I know blaming the power supply is a much more simple explanation, but then I'm left with explaining the intermittent nature of the failure.
View 9 Replies
View Related
Dec 23, 2010
From many days the battery icon is missing from the taskbar, the notification icon is greyed out even if the laptop is not on AC. i followed the the tutorial System Icons - Enable or Disable but nothing happened.
View 3 Replies
View Related
Mar 17, 2012
My computer wouldn't shut down, even with holding in the power button, and so I just let it run out the battery. Then it wont turn on. I tried holding down the power button to clear out any charge that might be remaining. I have managed to get it back on, but I have to make a connection at the clip where you plug the power button ribbon into the mobo. Also, this is the second time I have had to do this. The computer works fine afterwards...or seems to anyway.
View 1 Replies
View Related
Oct 23, 2012
Suddenly pc doesnt boot up we change with new psu and from that time pc power up by the time we connect the psu with power ,
i remove all cables i left connection psu with motherboard but still the pc power up by him self , i remove the cpu and then didnt power up ..
View 1 Replies
View Related
Jan 27, 2013
My daughter has a Hp laptop and it was working fine, but the screen was coming apart. so my husband put it back together, Now it will not come on. It's getting some power but not coming on at the power button. The lights flashes when you push the button then nothing.
View 1 Replies
View Related
Aug 23, 2009
How to Create a Shortcut to Change Power Plans in Windows 7 ?
View 0 Replies
View Related
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related