I am UNABLE to connect to my home wi-fi after a brief power interruption... it get the following message "The settings on this computer do not match the requirements for this network." and the 'connect' button is grayed out!!! my wired internet works just fine after the power flash. but my wireless seems to NOT want to allow me to connect!
View 6 RepliesThe main problem is that my ONE computer's security settings do not and will not match to my router. I'll try and list everything I did. Hopefully I won't miss anything. Obviously, I try to look at the settings and see why they don't match. My netbook is also running on 7 Ultimate (32bit), and it has no problem whatsoever connecting to the router and accessing he internet. I look at the wireless settings on there. Match perfectly to the ones in the properties. So far nothing logical. I try using the WPS button on my router to connect. It tries to, but it always says it simply can't. I copied the wireless settings from my netbook to my desktop (the computer in question) on a flash drive and tried to put them onto my desktop. Signal strength is excellent, no problem there. Reset router to factory default settings. No changes there.Called Comcast (the router/modem is actually theirs).
View 3 Replies View Relatedi have installed win7 on my mgs one notebook and the vga and the network drivers are not installed. i have downloaded them and when i tried to install them, it saying that '' this computer does not meet the minimum requirements for installing the software''. i have try my best but nothing happen. The thing is that the machine was running win7 before and it gave some error when i have compressed the system disk c. i have also the drivers cd for the machine the one that was with the machine when i bought it.
View 3 Replies View Relatedbought a new laptop with windows 7. When I try to instll my printer it says does not meet minimum requirements. Why?
View 2 Replies View RelatedWhen I try to install my computer drivers it shows This computer does not meet the minimum requirements for installing the software message.My motherboard model is ASUS-P5KPL-AM.
View 4 Replies View Relatedthird monitor displayed, graphic card only supports two monitors, however I need to get a third up and running. RE14842 is the driver and I get this error, coworker has the exact same drivers and hardware, only thing that is different is I had mine imaged from previous OS, coworker did not.
View 1 Replies View RelatedI installed Intel Management Engine Driver, Intel Chipset Driver, Intel USB3.0 Driver, Realtek High Definition Audio Driver but i couldn't install many other drivers like Intel Rapid Storage Technology Driver, Intel Rapid Storage Technology Driver for 7x series, Intel Smart Connect Technology Driver it says "Platform Check Failed: Unsupported Hardware" or "This computer does not meet the minimum requirements for installing the software."
View 14 Replies View RelatedI have 2 computers. One I was using as windows media center. I have it set with a Ceton Infinity tuner card. This one has Windows 7 pro 64 bit. The other one was just setting doing mostly nothing. It has windows Vista ultimate 64 bit. I thought that could make this one as a extender but I am having trouble setting it up. I believe that I have both computer setup to share all files. I can go to no 2 and add libraries that on no 1 but nothing shows up on no 2. I am about ready to throw a computer and the other equipment I bought for in the trash. Just about any thing I do screws up. Every can that I guess Can not spell or write in good English.
View 1 Replies View RelatedHow do I take my computer to factory settings so I can make a recovery cd?
View 1 Replies View Relatedi tryed sending a message via email and it said i had to set up my default mail client up and how do i do tha?
View 2 Replies View RelatedInstalling Mail client on my pc.
View 2 Replies View RelatedCould not perform this operation because the default mail client is not properly installed. Comes up when submitting a resume request. How do I fix this issue
View 1 Replies View Relatedhow do i restore my computer back to factory setting.
View 1 Replies View RelatedI'm going to need to do a little video editing (with the After Effects trial) in a few weeks' time, so I decided to practise a little beforehand so that my edit isn't half bad. When doing a RAM preview, it only loads at around 10 FPS which takes ages if I'm doing a slow-mo effect. When I built this PC, I only put 8GB of RAM in it as I wasn't planning on doing any video editing, but now that I am, I'm considering an upgrade. Is it unwise to mix and match different brands of RAM? I'd have to match the timings, speed and voltage, but apart from that I can't think why it would matter.
View 5 Replies View RelatedOn my Vista computer, my wireless keyboard/mouse wakes the computer. But on my Windows 7 computer, it doesn't. Is there some setting somewhere?
View 9 Replies View RelatedI recently did a system restore to factory settings and now my computer is running very slow. I have done all the windows updates and checked for any updates on the drivers. I also defraged it. I noticed that the physical memory is always very high between 85 and 100. The CPU is 10-50.
View 5 Replies View RelatedHad a HP running Vista Home Premium. System board croaked and owner elected to buy a new HP with Win 7 Home Premium. I figured it would be a piece of cake to mount the old HD via a USB connection and run Windows 7 Easy Transfer to migrate things from there to the new computer.I had to copy everything over manually, one profile at a time.
This seems like an obvious scenario that WET should handle but it doesn't. Was there any other automated process I could have used? Just curious at this point as the work has already been done and the new computer is up and running.
THE OS of my net book is Windows 7 Home Premium and I would like to know why I cannot find a FILE when i type its name in "Search for programs and files" in Start Menu. It can only show PROGRAMS you would like to find. Ex. I would like to find techguy.doc. I knew the file is in my system but I cannot search it in Start Menu Search Panel for quick access. It says No Items match your search. In contrast, in my desktop (OS is Windows 7 Ultimate) it can find specific file ( pictures, music, doc etc) and also the programs. I would just like to know if it depends on the Windows Edition.
View 6 Replies View RelatedIt fits the socket but does it have to support the CPU as well? I want to buy a cooler and i see in the description that other than the socket they also list what CPUs are supported.
View 1 Replies View RelatedI've gone through every BIOS, network card, and windows setting I can find any reference to over the last 48 hours, to no avail. I've mostly isolated the problem, just can't find anything that shows me how to fix it.
System Details:
Asus P5B-Deluxe w/ WiFi, Latest BIOS Update
On-board Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Enabled and being used - latest Driver installed
On-board Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller - Disabled and unplugged - latest Driver installed
Intel Core2Duo E6800
2GB DDR2 RAM
ATI Radeon HD3870
I've got the system setup so that the network card SHOULD only wake up the computer if it sees the "Pattern Match" packets which have supposedly been improved in Windows 7. Magic Packet just won't work for what I need, so I disabled that even for the sake of ruling out issues.
Issue: Any time ANY network traffic comes across the network card, the computer comes out of sleep, even though I'm quite sure they don't fit the "pattern match" that it's supposed to be looking for. I've done packet sniffing etc, and the card is behind a switch all by itself. I have proved this theory a number of ways, including disconnecting every other device on the network which allows the computer to stay asleep, but as soon as you turn another device on, this one wakes up.
Does anyone have experience with windows 7 (32) not allowing the network workgroup name to match a username? Do to some existing procedures we would like the username & workgroup to be the same. This works fine on XP machines but not on the Windows 7 machine.
View 1 Replies View Relatedwhat should I do the sound and picture are not match when I view movie from the internet
View 1 Replies View RelatedFrom new windows 7 laptop through wireless home network tried to access XP desktop connected to same wireless home network. Was able to move files from xp computer to windows 7 computer but when tried to access files on xp computer from windows 7 computer got the following error after trying to click on the xp computer listed under Network in Windows 7 Computer:Windows cannot access <computer name>Is there a setting on the windows 7 or computer xp that needs to be set for windows 7 computer to recognize xp computer?
View 1 Replies View RelatedI have just finished my very first computer build and am rather happy with most things.Unfortunately I am having problems connecting to the internet.I have a temporary dongle in place and because it's my only option for about a month I kinda need it to work.When I first connected it I found my connection and I successfully connected, I downloaded Google Chrome and Steam, then unfortunately it randomly stopped working.Where the strength bar should of been, there was a large red cross, when I found my connection it read "The settings saved on this computer for the network do not match the requirements of the network".
View 1 Replies View RelatedSearching via the Explorer search bar/start menu for music no longer produces any results. My music has always been stored on an external drive, plus it's added in Music>Libraries - same results in both locations. If I search a particular folder that I know contains what I'm searching for, I still find nothing. (For example: Searching for "bowie" or "heroes" in a big folder of David Bowie albums). I've recently tried adding this external drive to the index, just in case, although actually, it wasn't being indexed before I had the problem and I would still expect the files to be found -- albeit slower -- without indexing! I'm not aware of having changed any settings that could cause this.
View 9 Replies View RelatedI had 4gb or ram but then I added another 4 to make 8gb or ram, but I am getting bsod. How do I change the voltage to match the ram?
View 5 Replies View RelatedI would like to know how much of RAM would be needed to run Windows 7 64-bit edition ?
Right now I am planning to go with 2 gb DDR3 RAM.
does gta 4 goes with win7?
View 1 Replies View RelatedI am looking to have someone build a computer to run the cs5 suite. What is the basic I should be asking for?
View 3 Replies View Relatedi have 256 video card what graphics i have to install?
View 1 Replies View RelatedWhat do I need to run DX 11 in my system, along with Windows 7?I know a DX11 capable video card is required. Anything else? Motherboard?
View 4 Replies View Related