Settings Saved Does Not Match The Connection
Nov 10, 2012
I have just finished my very first computer build and am rather happy with most things.Unfortunately I am having problems connecting to the internet.I have a temporary dongle in place and because it's my only option for about a month I kinda need it to work.When I first connected it I found my connection and I successfully connected, I downloaded Google Chrome and Steam, then unfortunately it randomly stopped working.Where the strength bar should of been, there was a large red cross, when I found my connection it read "The settings saved on this computer for the network do not match the requirements of the network".
View 1 Replies
ADVERTISEMENT
Oct 18, 2012
The main problem is that my ONE computer's security settings do not and will not match to my router. I'll try and list everything I did. Hopefully I won't miss anything. Obviously, I try to look at the settings and see why they don't match. My netbook is also running on 7 Ultimate (32bit), and it has no problem whatsoever connecting to the router and accessing he internet. I look at the wireless settings on there. Match perfectly to the ones in the properties. So far nothing logical. I try using the WPS button on my router to connect. It tries to, but it always says it simply can't. I copied the wireless settings from my netbook to my desktop (the computer in question) on a flash drive and tried to put them onto my desktop. Signal strength is excellent, no problem there. Reset router to factory default settings. No changes there.Called Comcast (the router/modem is actually theirs).
View 3 Replies
View Related
May 2, 2011
My girlfirends new PC has Windows 7 64-bit on it, now getting on the internet is a real headache! every time I click the network list at the bottom, and select the network I want, it will connect but if I make it show the the list of networks again it will loose the network. When it does connect after a while it might drop off then trying to reconnect come up with "the settings do not match" I have to change them, then change back to get it to connect again but if I keep an eye on it while it connects it fails.
Windows 7 Home 64-bit
Disabled the IPv6 setting
I tried the wifi client that comes with the wifi card
I tried changing the router settings
It's WPA2 security
View 3 Replies
View Related
Jul 20, 2009
I am having problems when I try and apply my Printer to be shared in windows 7 I get error message saying that printer settings could not be saved. 0x000006d9. I have reinstalled the drivers and rebooted the pc and I am logged on as an Admin but it still wont work.
I am using Windows 7 Build 7100.
Any ideas on how I can fix this annoying problem.
View 9 Replies
View Related
Apr 22, 2011
I am running a report that calculates a percentage, and in order to do this I have to change the regional currency decimal settings to 3. (It is normally 2). When I make this change, it saves and the report runs fine.But after I log off then log back on, the setting reverts back to 2. I am part of a domain but there is nothing in group policy that affects regional settings. My XP system, which is also part of the domain, is able to keep the setting. Is there any reason why it won't keep this setting? It keeps it until I log off the system.
View 3 Replies
View Related
Apr 10, 2012
As of late I am experiencing a strange loss of Bios setting when I either warm boot or cold boot. Examples as follows: When restarting either from a warm restart or cold restart, I will hear 3 beeps which I believe is a memory related error, correct me if I am wrong. I do know if settings go back to default range the voltage is less than what is needed to successfully boot with OC settings enabled.I have also noticed that I sometimes do loose all of the bios settings under many different conditions, regardless of how and why I had to restart.The one setting that stands out the most is the FSB setting, many times this value is the only value changed; [goes back to default] and needs to be reset.This machine has given me yeoman service since 2008 and has been OC'D at a 50% overclock 60% of the time, the rest of the time it is OC'D at a bit higher rate and stable.I did replace the Battery on the MOBO[P5K-Premium WiFi/AP thinking this might possibly be the cause. I have found the incident of this happening to be less but values in the BIOS still change however infrequently.
View 4 Replies
View Related
Feb 18, 2009
I have the problem that my program is shown there but i can't set it to "Show Icon and Notification". Every time i close the program and open it again, the settings are the default "Only show notifications". Is there a work around to force this? And NO i don't want to check the options "Always show all Icons and notifications on the taskbar"
View 8 Replies
View Related
May 31, 2011
My Windows 7 Home Premium Homegroup is not accepting my settings (stuck on its own settings). I'm able to go to my Homegroup settings and CHECK the boxes for sharing video, pictures, doc.s, and music yet, When I Click save changes, it closes-out the window and when I view Settings once more.. they remain the same as before I changed them (stuck on only "Printers"). This goes for other HomeGroup Settings as well. I'v stopped and started the HomeGroup Services "Listener" and "Provider", but the Strange thing is that it is sharing those files in My HomeGroup.. just not realizing it is.. or sumthin?? Also tried Leaving HomeGroup, Rebooted, and Joined. idk, but more than likely has to do w/ the Home Premium version.. because the Ultimate edition is able to see this Home Premium Laptop as if I had my settings changed to share and stream music, etc.. the Home Premium can't see the Ultimate edition in the HomeGroup
View 1 Replies
View Related
Feb 10, 2013
I am running Windows 7 and yesterday my wife bought an HP 3512 printer. It has wireless capabilities, so she thought it would be nice to be able to print from other computers or tablets or phones in our house.I originally had issues even getting it to connect via wireless but it is now connected to my router, has an IP address, and if I log into my router, I see its connection. The printer works fine if I have it plugged in via USB. But as soon as I unplug the cable, the printer goes offline. Now, I assumed that by wireless printer, that meant I would not even need it hooked up to my desktop. Maybe I am wrong on that though.But my main issue is I cannot get the printer shared with the homegroup. If I run the printer troubleshooting, it even tells me that the printer is not shared with the homegroup and I should try to have it shard as administrator. So I click that box then it tells me it found but could not fix the issue. It's still not shared. If I go to the printer, go to properties, then sharing, if I try to click share and apply changes, I get an error saying "printer settings could not be saved. error code (0x0000000001) or something. It simply will not go onto the homegroup. If I add it to the homegroup to be shared, would that allow me to move the printer off of my desk and unplug the USB and still be able to print?Also, still regarding Homegroups. My computer is connected via wire to my FIOS router. A laptop in the other room however, connects wireless. They somehow end up in different networks and cannot join the same Homegroup. Both run Windows 7. I have looked and cannot find why they would be on different networks. They were not always this way, I use to be able to see the laptop on my desktop but no longer can.
View 9 Replies
View Related
Oct 11, 2011
I'm on a brand new HP computer running Windows 7 and everytime I download a file from the internet or even save files from local programs to my desktop, they are saved as some sort of hidden file...or at least they behave similar to hidden files. The difference is if I open up an Explorer window and browse to my desktop, I can see them there that way, but there is no icon on my desktop for the file. I CAN see the the saved file on my desktop if I turn "view hidden files" on...but when I look at the properties of said files, they are not actually marked "hidden." I can even copy/paste that same file in my desktop and I will see the copied file show up visually on the desktop, but still not the original file unless I browse to the desktop in an Explorer window.When right clicking the desktop, "Show desktop icons" is turned on and I can view all of my other desktop file icons, shortcuts, etc.
View 2 Replies
View Related
May 22, 2011
i'm having trouble getting onto the internet with my wired settings on my desktop. I usually have it connected through wireless (I have a pci-e wireless card), but when i try with my ethernet cable, it doesnt connect. I have two OS's installed on this computer windows 7 and vista. I have tried to on both windows to get on the net, but to no avail. I have tried the diagnose and repair, but it doesnt fix anything. It does however, says "Windows cannot connect to the primary DNS Server" or something like that.
View 6 Replies
View Related
Oct 17, 2010
when i surf the internet about 50% of the time i get the error "Internet Explorer cannot display the webpage". And when i hit the troubleshoot tab it states "security or firewall settings might be blocking connection"
View 4 Replies
View Related
Dec 31, 2011
I am trying to fix my friends wireless connection here, im a mac user and not very good on windows so i dont know what to do. I am following some you tube videos for help. As far as i know in 'change adaptor settings' you should be able to see your LAN and wireless connection to enable or disable but the thing is there is no wireless option in there? and it did used to work before.My friend told me that she used to have XP and another friend of hers upgraded it to windows 7 for her.
View 1 Replies
View Related
Nov 23, 2012
I'm going to need to do a little video editing (with the After Effects trial) in a few weeks' time, so I decided to practise a little beforehand so that my edit isn't half bad. When doing a RAM preview, it only loads at around 10 FPS which takes ages if I'm doing a slow-mo effect. When I built this PC, I only put 8GB of RAM in it as I wasn't planning on doing any video editing, but now that I am, I'm considering an upgrade. Is it unwise to mix and match different brands of RAM? I'd have to match the timings, speed and voltage, but apart from that I can't think why it would matter.
View 5 Replies
View Related
Nov 15, 2011
THE OS of my net book is Windows 7 Home Premium and I would like to know why I cannot find a FILE when i type its name in "Search for programs and files" in Start Menu. It can only show PROGRAMS you would like to find. Ex. I would like to find techguy.doc. I knew the file is in my system but I cannot search it in Start Menu Search Panel for quick access. It says No Items match your search. In contrast, in my desktop (OS is Windows 7 Ultimate) it can find specific file ( pictures, music, doc etc) and also the programs. I would just like to know if it depends on the Windows Edition.
View 6 Replies
View Related
Jul 10, 2012
It fits the socket but does it have to support the CPU as well? I want to buy a cooler and i see in the description that other than the socket they also list what CPUs are supported.
View 1 Replies
View Related
Jun 9, 2011
I've gone through every BIOS, network card, and windows setting I can find any reference to over the last 48 hours, to no avail. I've mostly isolated the problem, just can't find anything that shows me how to fix it.
System Details:
Asus P5B-Deluxe w/ WiFi, Latest BIOS Update
On-board Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Enabled and being used - latest Driver installed
On-board Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller - Disabled and unplugged - latest Driver installed
Intel Core2Duo E6800
2GB DDR2 RAM
ATI Radeon HD3870
I've got the system setup so that the network card SHOULD only wake up the computer if it sees the "Pattern Match" packets which have supposedly been improved in Windows 7. Magic Packet just won't work for what I need, so I disabled that even for the sake of ruling out issues.
Issue: Any time ANY network traffic comes across the network card, the computer comes out of sleep, even though I'm quite sure they don't fit the "pattern match" that it's supposed to be looking for. I've done packet sniffing etc, and the card is behind a switch all by itself. I have proved this theory a number of ways, including disconnecting every other device on the network which allows the computer to stay asleep, but as soon as you turn another device on, this one wakes up.
View 2 Replies
View Related
Jan 18, 2012
Does anyone have experience with windows 7 (32) not allowing the network workgroup name to match a username? Do to some existing procedures we would like the username & workgroup to be the same. This works fine on XP machines but not on the Windows 7 machine.
View 1 Replies
View Related
Feb 27, 2012
what should I do the sound and picture are not match when I view movie from the internet
View 1 Replies
View Related
Feb 9, 2012
Searching via the Explorer search bar/start menu for music no longer produces any results. My music has always been stored on an external drive, plus it's added in Music>Libraries - same results in both locations. If I search a particular folder that I know contains what I'm searching for, I still find nothing. (For example: Searching for "bowie" or "heroes" in a big folder of David Bowie albums). I've recently tried adding this external drive to the index, just in case, although actually, it wasn't being indexed before I had the problem and I would still expect the files to be found -- albeit slower -- without indexing! I'm not aware of having changed any settings that could cause this.
View 9 Replies
View Related
Dec 26, 2012
I had 4gb or ram but then I added another 4 to make 8gb or ram, but I am getting bsod. How do I change the voltage to match the ram?
View 5 Replies
View Related
Jan 24, 2013
I am UNABLE to connect to my home wi-fi after a brief power interruption... it get the following message "The settings on this computer do not match the requirements for this network." and the 'connect' button is grayed out!!! my wired internet works just fine after the power flash. but my wireless seems to NOT want to allow me to connect!
View 6 Replies
View Related
Dec 7, 2011
I'm helping to develop a web application that uses iframes. On the main page (outside of all frames), we have a div that we use to display and print forms. We also have 2 nested iframes; the innermost iframe contains the main page content. When printing, we use extensive CSS and Javascript (contained in the outermost window) to hide everything except the print div.When I use File > Print Preview, it always displays the correct preview; that is, the outermost window which contains the print div. Printing from the Print Preview works as it should. However, when I use File > Print, it seems to print whatever window has focus, not the entire page (outermost window). Therefore my print div doesn't get printed and all I get is a printout of whatever is currently onscreen. Why doesn't the print out from File > Print match what is shown in the print preview?
A related issue occurs when using JavaScript's window.print(). When I call window.print from within the print div, it prints as it should. But when I call parent.parent.window.print() from within the double-nested iframe, IE still only prints the window that has focus, not the outermost window (as shown by "parent.parent."). And since they just clicked on a button in the innermost frame, the innermost frame has focus, my print div doesn't print and all I get is a printout of whatever is currently onscreen. I have been using "parent.parent" for all other Javascript calls from the nested iframe to the outermost, so I know that's not the problem.
My temporary solution is to focus on the outermost frame when the users mouses out of the nested window (ie, when they mouse up to the file menu) Code: window.onmouseout = parent.parent.window.focus(); and focus on the outermost frame when the user clicks the print button that is within the nested frame. I would really rather not do this focusing, especially on mouseout, because it seems to cause some issues when the user pulls up another application.I have also tried using the onbeforeprint event to focus. The onbeforeprint was triggered, but I couldn't get the focusing to work correctly.I haven't been able to find anything regarding these problems online; has anybody had similar problems?
View 1 Replies
View Related
Sep 5, 2012
Has anyone of readers a Japanese keyboard and trouble with the assignment of the keys when working in English.
I have a querty keyboard, all letters/CAPITALS work fine. However the majority of the symbols !@#$%^&*()_+{}:"<>?, are assigned to the wrong keys
Example @ is SHIFT 2, but it indicates on that key "
View 1 Replies
View Related
Aug 15, 2012
trying to manually add album data but wmp forces me to match every single track of every single album - when it already knows what the album is and the contents, as it shows the correct picture and album. This process should take me about 20 years. I assume this is because I am not letting wmp retrieve internet info as it wants because it's always wrong, (so MSN make it as difficult as possible to get info manually I guess)
and because it keeps making single track downloads into individual albums instead of a folder of mixed tracks which is WHAT I WANT. I don't wish to have my music arranged according to a programmer at microsoft... but this takeover by microsoft is getting more and more frustrating as they eliminate more and more customer choice from programs and dictate how it will all be set up and run from microsoft.
Is there anyway we can organise albums, tracks, files and folders the way we want to, instead of having microsoft shuffling them around and deleting databases, playlists and formats it doesn't agree with? Why can't I match the whole album when it appears in the search results? It's not rocket science
View 1 Replies
View Related
Dec 13, 2011
I have a new computer build where I have Win 7 Pro 64-bit installed on a SSD. Then I have a pair of 1TB drives that I setup as mirroring drives in Disc Management. I proceeded to setup my windows backup to the mirrored drive, but it is giving me the warning: When restoring a system image from this volume, the disks on your computer cannot be formatted to match the layout of the disks in the backup. To have full restore functionality, select a volume on basic disk as our backup location. I am not really sure I even need a backup for the SSD.
It is a small 64GB drive strictly for the OS and surfing the net, minor games (card games, etc.) and a few other minor things. I mirrored the 1TB drives because they are going to be our music server on our network for our laptops, as well as we planned to backup our laptops to the 1TB drive. I figured I would mirror the 1TB in case one crashed we would have the backup. However, if I am having issues with not being able to setup windows backup on these from this computer, I assume I will run into the same issues with the laptop backups. Is there no way to use windows backup to a mirrored drive?
View 1 Replies
View Related
May 10, 2011
I've got Windows 7 x64 installed and my power went out during boot today. After restarting, I got this error during boot:
"BOOTMGR image is corrupt. The system cannot boot."
I put in my Win 7 disc and tried to boot from it, but after pressing "any key to boot from cd / dvd .." I get this error:
"The file is possibly corrupt. The file header checksum does not match the computed checksum."
All the fixes I can find online have to do with using the recovery console, which would be awesome, if I could actually get to that point. I even tried my old Vista and XP discs, but I don't even get as far as above. The computer just stops with a small cursor near the top, often having to be powered off to restart because ctrl+alt+del doesn't even work. A fresh install is just not an option because I have important business data on the computer that I can't afford to lose. Also, I literally couldn't do that even if I wanted to since none of my windows discs will even load.
View 4 Replies
View Related
Apr 4, 2011
I have a copy of my maths assignment (my most recent version...which is not backed up) that I have been unable to open. The error is: The file cannot be opened because there are problems with the contents. Details: The name in the end tag of the element must match the element type in the start tag. Location: Part:/word/document.xml, Line: 2, Column: 12620. How to correct this error? I am working with Word 2010.
View 2 Replies
View Related
Mar 11, 2011
windows 7 desktop settings changed my customized settings after logging on..
View 5 Replies
View Related
Sep 23, 2012
Now, just 3 days ago It started the BSOD issue.I realize that my GPU was the cause of this issue. When playing games or open 3d applications the temp goes 30C to 72C (In 15 seconds) then 82C - 85C constant (in about 30 seconds).Now I've been using MSI afterburner to check my temps and at fulload my GPU will be at 62-72C max temperature but now it's 10C even higher then before. No, I haven't fiddled with the voltage I set the GPU voltage to 1.037v which is the safest (been running this almost 8 months!). The GPU is the GTX 560ti.Is there a way to set the GPU on default settings or reset GPU settings in cmd or other professional way. I have uninstalled the drivers, uninstalling GPU, disabled GPU, disabled PCI-E slot and so on by using device manager and the issue still persist. Yes, I also have clean the GPU perfectly and still the temperature goes up to 82 seconds at 30seconds-45seconds. Yes, I have checked everything is set correctly and so on, I am a PC Tech.
Is the GPU damaged? Yes I have looked at this thread: Stop 0x124 - what it means and what to try Mainly, I know its the GPU straight away, I tried checking old drivers, new drivers, another GPU overclocked software such as GPU tweak and EVGA Precision. I am thinking it's the GPU is damaged or the PCI-E is damaged (I have another PCI-E slot on my system and the issue still there). It might be the PCI-E frequency? but it's set to 100 which it meant to be, I just hope is software related because I don't have the money to buy a new card. Did the dump files help?
View 4 Replies
View Related
Mar 22, 2012
My sister sends me jpeg photos from her phone as attachments in gmail. In the email, the preview pic looks normal. When I click View, the pic is enlarged, but flipped 90 degrees. If I download the pic, it's flipped 90 degrees. If I open the pic in windows live photo gallery, I can rotate it, but will get a bunch of pop up error messages saying This photo cannot be saved because of a problem with the photo's file properties. Then it says there's a problem with windows live photo gallery and shuts down. This pic flipping in gmail started about a week ago. Previously her pics displayed correctly. She says she's doing nothing out of the ordinary. I just tried loading the photo into MsPaint. I was able to rotate it and save it.
View 2 Replies
View Related
