BootMGR Image Corrupt - File Header Does Not Match To Computed Checksum
May 10, 2011
I've got Windows 7 x64 installed and my power went out during boot today. After restarting, I got this error during boot:
"BOOTMGR image is corrupt. The system cannot boot."
I put in my Win 7 disc and tried to boot from it, but after pressing "any key to boot from cd / dvd .." I get this error:
"The file is possibly corrupt. The file header checksum does not match the computed checksum."
All the fixes I can find online have to do with using the recovery console, which would be awesome, if I could actually get to that point. I even tried my old Vista and XP discs, but I don't even get as far as above. The computer just stops with a small cursor near the top, often having to be powered off to restart because ctrl+alt+del doesn't even work. A fresh install is just not an option because I have important business data on the computer that I can't afford to lose. Also, I literally couldn't do that even if I wanted to since none of my windows discs will even load.
I'm trying to install Windows 7 on my PC as a dual-boot w/ XP. First of all, is there a guide somewhere for doing this, because I'm basically winging it at this point.
Secondly, when I burn the image ([link removed by admin]) to a DVD+R and boot from said DVD, I get a black screen with the message 'BOOTMGR Image is corrupt. System cannot boot." in the corner. I've burned it three times using different programs, all at the slowest speed possible, and I always get this message.
The MD5 matches the one specified on the torrent info page, so I don't think the image is the problem, and nobody else on the site seems to be having this problem. I've burned other operating system boot disks using this drive and these disks before, so I don't think they are the problem, either...but this leaves me with nothing to blame.
Bootmgr image is corrupt my child is getting this when stating her laptop, it was a second hand laptop i bought a couple of months ago ,i have tried the recovery disc and then got this The file or directory D:Windows.old is corrupt and unreadable. run the CHKDSK utility. Which it looks like vista was on before windows 7?i just run command prompt and got tgot this in the command promp the type of the file system is NTFS CANNOT LOCK CURRENT DRIVE Chkdsk cannot run because the volume is in use by another process ,Chkdsk may run if this is dismounted first,all oppened handlesto this volume would then be invalid would you like to force a dismount on this volume <Y/N> so do i force a dismount?
just moved my uncles HDD to a SSD i finally got it to boot no problem andeverything seems to be back to normal but a new issue has come up.every 5th or 6th time i reboot it gives me the BOOTMGR image is corrupt. The system cannot boot error then after i restart go into the BIOS go save to CMOS the system boots as if nothing happened. so far i have tried: run startup repair run bootrec.exe /fixmbr /fixboot and fix bcd commands x4 strangely it says everything is completed but shows 0 indows installs.reinstalled Win 7 no virues no spyware I'm thinking of maybe changing the CMOS battery.
Laptop dropped & out of warranty. I have read some forums and called HP they said I need to run windows 7 disc, which I don't have, she said when I do I will clear the hard drive (I hope not but, it is what it is)? Cannot get into the laptop other than the start up menu, F8 does not work so I cant back anything up (oh well). system diagnostics memory chech fine, teast 1 (Quick).. error. run/ hard drive failed.
1) Is My HD Done? or...
2) Where can i find this download software for free.
3) How can I download onto usb and then onto Laptop?
4) what is the easiest way to run it on the broken laptop?
I face issue with my acer 5738G. Its shows boot mgr missing or corrupt. System repair does not work. It shows unable to repair offline. While trying to install OS all over again it stuck in a blue screen with a message "starting setup ". I am blackout without my laptop.
I got my new computer at Christmas time and up until now its worked great. This morning my computer was lagging as was the internet to i rebooted and i saw bootmgr is corrupt - system cannot boot. I went to repair it with the Windows 7 disc but the 'loading files' bit seems to take ages and it takes forever for the language and keyboard selection screen to come up. When i hit repair or new instal (ive tried both) it seems to be loading but then a black screen will appear and the dics in my comp will be spinning, but then nothing happens. The red loading light on my tower seems to blink on a repeated pattern.
"windows 7 setup.exe corrupt file the file or directory is corrupt"I'm trying to install 7 32bit OEM Home Premium with the legit bought holographic CD (not a burned image of any kind) onto a Gateway laptop with a brand new hard drive.I was getting this error installing the OS the regular way booting to the cd and installing from it, so instead I copied the contents of the cd to a freshly quick formatted NTFS partition on the new laptop hard drive, then used bootsect and diskpart to setup the disk. It boots just fine and also gets the same error installing straight from the hard drive.
When I try to sync music from windows media player to my phone, I get an error message on some songs that says File header too large. What I can do to correct this so the songs will play. I download mp3s from napster & my phone is a Blackjack2.
I was having trouble migrating my OS to a new ssd and received the "Bootmgr is corrupt system can not boot" screen repeatedly after restoring from system image, kept happening so I just decided on a fresh install. Install went well and was fully functional (eg drivers and devices) yet when restarting after installing microsoft office, I got the "Bootmgr is corrupt system cannot boot" appeared and now cannot get the pc past this point no matter how many reboots.
I have a copy of my maths assignment (my most recent version...which is not backed up) that I have been unable to open. The error is: The file cannot be opened because there are problems with the contents. Details: The name in the end tag of the element must match the element type in the start tag. Location: Part:/word/document.xml, Line: 2, Column: 12620. How to correct this error? I am working with Word 2010.
I'm having a few issues with images for Windows 7. I've been working with Vista images for the past few years without any problems but following the same procedure with Windows 7 doesn't seem to work for me.
To begin with I install the machine like normal, add in all of the software and then disable the Windows Media Player Network Sharing Service and sysprep the machine. After I boot using Win PE and capture an image once I try applying it the image fails, saying the the bootmgr is missing.
I can fix this by booting to a windows 7 dvd and run two repairs but would prefer if this didn't happen at all...
i get an error boot image currupt and the system will not boot. i tried to run windows 7 dvd repair screen without any success. I changed the boot sequence from hard drive to cd/dvd. The system does not continue after the error.
My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.
For what ever reason, I have a file on my 1TB WDC drive:
D:usersuser_namedocumentsxxxxx.pdf
that upon trying to open it, I receive a message that the file is corrupt.I have looked high and low trying to find a way to DELETE this file, but to no avail. There's lot of references about running CHKDSK to check the drive, running FSUTIL to query the dirty bit (which is set on this drive, because of this file), and using CHKDSK to clear the dirty-bit. And, I tried them all. This, however, is NOT a hard drive issue. The drive is fine. It's the file structure that is in error. I just need a solution that will let me DELETE the file. I don't want recover it.
1. Use Paragon-Software Hard Disk Manager 12 to copy the hard drive to another drive. The second drive is large enough to hold all the data from the larger drive.
2. Check the file on the drive copy... (yep, it's there... yep, it's corrupt... yep, the dirty-bit is on)
3. Create a filter in Paragon-Software HDM12 for that specific file.
4. Run the disk copy again using the filter.
5. Check the file on the drive copy... (this time the file is not there and the dirty bit is not set)
Having done this, I think I'm ready to copy the hard drive back. I just haven't pulled the trigger. I want to recable the drives to use the copy just to make sure I can reach everything. Then, I'll pull the trigger.
I have a brand new computer running Windows Home Premium 7, 64 bit. My mouse will not behave. As an example, when I left click nothing happens and I must right click and then select 'open' or 'open link' from a pull down menu. I think something must be corrupted but I don't know how to fix it.
I have Vista Home Premium 64 Bit and Windows 7 64 Bit. As you see I am dual booting. I had Vista installed first.I installed Win 7 later.Everything was fine.
I installed cuipid a program that monitors,memory,CPU,etc. on Win 7. I used the PC aftyer that for a couple of hours.I shut doem,the next day I booted up went in to Windows 7(set as Default). It was fine.I resarted and arrowed to Vista to boot into Vista.
I got a Black sctreen saying: Windows failed to start. Hardware or software change may be the problem. I went into 7 and restored the system back to before I installed Cuipid,No Luck.
The screen that comes up when I try to boot into Vista says:
1 Insert windows Disk and restart.
2.Choose your choose your language and click next.
3. Click repair your PC./
I tried a repair on Vista and &.
On the page I also get error: File/windows/system/32/Winload exe.
Status: Qxc000000F
then selected entry could not be loaded because the application is missing or corrupt.
I know there is a way to restore the Boot manager from Cmd??
I would appreciate it if anyone could advise me how to restore the Boot Sector.
i have this corrupt file on my computer, my OS is windows 7 and no matter what i seem to do the file wont delete. This file is like a ghost, its not on my hardrive and there's nothing in it, its just sitting in my library in my pictures section. The file location is C:UsersStevenPictures, and the file name is 50292_132656813424_564_q. Like i said this file is like invincible to everything i throw at it. Ive tried unlocker and renaming it and also tried using CMD commands to try and delete it but my computer cant find it.
I have FLASH DRIVE with seven setup inside,I have (WINDOWS 7 x86 and windows 7 x64)in one Install.wim.and i have too (windows 7 & active@diskboot)in one Boot.wim.now.so how i make.or create menu in BOOTMGR ((i don't using GRUB))so that i can called sevenx86-setup, sevenx64-setup, and active@diskboot with ONE BOOTMGR?
Last night, my computer rebooted itself unexpectedly while I was accessing a Word document. I was constantly saving the document, so I expected that it would come back up when the computer rebooted. Every time I try to open it in Word, it says that the file is corrupt and cannot be read. I have tried the Open & Repair function. I have also tried the Extract Text from All Files function. When I did the latter, the document came up to about 1,000 pages worth of different codes. When I open it in WordPad, the most recent things I saved did not come up. I am absolutely sure that I saved what I was working on. Is there any way I can fix this corrupt file? It is a crucial part of an assignment.
There is one specific folder in the Documents library, which when opened directly (like from a shortcut on the dekstop) only shows "corrupted" files with unusable strings for all file names and extensions.However, when opened in tree view, the files appear as they should. So at least it's reassuring that the folder contents are still there and can properly be read and changed. But the issue is still inconvenient and worrisome.I have already tried chkdsk /f on the partition and even mirrored the whole volume to a new harddrive, but that didn't help. I also tried copying the whole folder to another location, it shows up just fine that way as well.
I'm trying to re-install my firefox browser, but every time I try to run the executable file it loads to 4% then closes.It gives me a window that says..Extraction Failed ile is corrupI'm also trying to update my drivers. But every time I run my graphics driver installation file it tries to "verify installation" then I get the following window...SIS ErrorInstaller Integrity check has failed. Common causes include incomplete download and damaged media. Contact the installer's author to obtain a new copy. [CODE]
When I was launching Turbo Tax I received this error message: c:windowsMicrosoft.netframeworkv3.0wpfgfx_v0300.dll is corrupt and unreadable. Please run Chkdsk utility What I have tried already:
1- Ran chkdsk utility -no issues
2-Scanned wpfgfx_v0300.dll for viruses and it came up Clean using Malwarebytes and Alvira
3- Ran a repair install on Framework .NET Framework 4 Client Profile then rebooted - still have the problem
4 - tried to simply delete the wpfgfx_v0300.dll system won't allow
5- Tried overwriting wpfgfx_v0300.dll file from a back up - system won't allow
6- Both Acronis File Shredder & Malawarebytes File Assassin SAID file removal was successful but the file is still there.
One other thing: Windows keeps wanting to run a disk check for "consistency" at boot up. I let it run but it doesn't seem to find anything. how I can delete, repair or replace this file???
I was asked by a friend to try and fix her laptop. I don't know any of the history that lead to this problem, So trying to fix this has become a bit difficult.When trying to boot it loads in the BIOS screen what seems like a little too long, and then it will start to load Windows7/Vista (I don't even know what OIS is running, that's how much I don't know about this laptop)(It was just dropped off at my house with a note) and I get the Windows Startup repair screen. After running the startup repair it says that the problem cannot be fixed automatically and in Signature7 of the repair it says CorruptRegistry. I have tried a backup point and there weren't any ever created. I try to run system restore or the Toshiba recovery and nothing happensI am aware that I may have to restore the laptop but I'm not even sure if the person has the disc anymore[CODE]
I had Windows Vista and I upgraded using the 'clean install' to Windows 7. I had been experiencing BSODs (blue screen of death) and I thought a re-install, or an upgrade would solve those issues. However, I continue getting those BSODs now with Windows 7 as well.I can't quite recall the stop errors and names, but they were mostly IRQL_NOT_LESS_OR_EQUAL. I also had 'memory management' sometimes.Recently I powered on my computer and realized everything was running slowly, and I've noticed the BSODs have stopped. I ran everything, anti- malware, virus, spyware programs and they found nothing. I ran memory diagnostics and it came up with nothing. There's nothing really on this computer to be slowing it down since I haven't fully replaced all my files and it's a new OS.The only thing that found anything out of place was after running SFC /scannow, the CBS.log file says this in several places:
[code]...
What I could understand from that is it's saying that a file, called msdrm.dll.mui, is corrupt. Apparently it's in the 'en-US' folder (assuming). It also says on the last line, 'file is missing'.Now, I've replaced from the actual Windows 7 installation CD, the file msdrm.dll.mui in the en-US folder, and in another folder that had the same file. After restarting, the computer still runs sluggishly.My question is, why would the system file still be corrupt even after replacing it from the installation CD? The CD is fine, no scratches or anything like that, and it's virtually new.Also, could my system be missing something that the file msdrm.dll.mui needs to function properly? (I ask this because it says 'file missing') What can I do about this system file to fix it?Note: I looked up the system file msdrm.dll.mui and I read that it's needed for system performance (and performance right now is my issue so I'm guessing this is what's making my computer run slugglishly).
