Intermttent Loss Of Saved Settings

Apr 10, 2012

As of late I am experiencing a strange loss of Bios setting when I either warm boot or cold boot. Examples as follows: When restarting either from a warm restart or cold restart, I will hear 3 beeps which I believe is a memory related error, correct me if I am wrong. I do know if settings go back to default range the voltage is less than what is needed to successfully boot with OC settings enabled.I have also noticed that I sometimes do loose all of the bios settings under many different conditions, regardless of how and why I had to restart.The one setting that stands out the most is the FSB setting, many times this value is the only value changed; [goes back to default] and needs to be reset.This machine has given me yeoman service since 2008 and has been OC'D at a 50% overclock 60% of the time, the rest of the time it is OC'D at a bit higher rate and stable.I did replace the Battery on the MOBO[P5K-Premium WiFi/AP thinking this might possibly be the cause. I have found the incident of this happening to be less but values in the BIOS still change however infrequently.

View 4 Replies


ADVERTISEMENT

Printer Settings Could Not Be Saved

Jul 20, 2009

I am having problems when I try and apply my Printer to be shared in windows 7 I get error message saying that printer settings could not be saved. 0x000006d9. I have reinstalled the drivers and rebooted the pc and I am logged on as an Admin but it still wont work.

I am using Windows 7 Build 7100.

Any ideas on how I can fix this annoying problem.

View 9 Replies View Related

Regional Settings Not Being Saved In Windows 7?

Apr 22, 2011

I am running a report that calculates a percentage, and in order to do this I have to change the regional currency decimal settings to 3. (It is normally 2). When I make this change, it saves and the report runs fine.But after I log off then log back on, the setting reverts back to 2. I am part of a domain but there is nothing in group policy that affects regional settings. My XP system, which is also part of the domain, is able to keep the setting. Is there any reason why it won't keep this setting? It keeps it until I log off the system.

View 3 Replies View Related

Settings Saved Does Not Match The Connection

Nov 10, 2012

I have just finished my very first computer build and am rather happy with most things.Unfortunately I am having problems connecting to the internet.I have a temporary dongle in place and because it's my only option for about a month I kinda need it to work.When I first connected it I found my connection and I successfully connected, I downloaded Google Chrome and Steam, then unfortunately it randomly stopped working.Where the strength bar should of been, there was a large red cross, when I found my connection it read "The settings saved on this computer for the network do not match the requirements of the network".

View 1 Replies View Related

Notification Area Icons Settings Are Not Saved?

Feb 18, 2009

I have the problem that my program is shown there but i can't set it to "Show Icon and Notification". Every time i close the program and open it again, the settings are the default "Only show notifications". Is there a work around to force this? And NO i don't want to check the options "Always show all Icons and notifications on the taskbar"

View 8 Replies View Related

Windows 7 Home Premium Homegroup Settings Not Accepting Saved Changes?

May 31, 2011

My Windows 7 Home Premium Homegroup is not accepting my settings (stuck on its own settings). I'm able to go to my Homegroup settings and CHECK the boxes for sharing video, pictures, doc.s, and music yet, When I Click save changes, it closes-out the window and when I view Settings once more.. they remain the same as before I changed them (stuck on only "Printers"). This goes for other HomeGroup Settings as well. I'v stopped and started the HomeGroup Services "Listener" and "Provider", but the Strange thing is that it is sharing those files in My HomeGroup.. just not realizing it is.. or sumthin?? Also tried Leaving HomeGroup, Rebooted, and Joined. idk, but more than likely has to do w/ the Home Premium version.. because the Ultimate edition is able to see this Home Premium Laptop as if I had my settings changed to share and stream music, etc.. the Home Premium can't see the Ultimate edition in the HomeGroup

View 1 Replies View Related

Power Loss To Notebook Shows Loss Of Windows Activation?

Jan 15, 2013

I had a power loss while running on battery (it still showed power left, but suddenly shut down anyway) and when I restart, it reports that the Windows is not activated and Window is not genuine and system might be a victim of "counterfeiting."

Is this a virus (I have MSE on continuously and about once a week scan with Malwarebytes)? I have run 'sfc /scannow' with filtered output ('findstr /c: "[SR]" c:.....logsCBSCBS.log" and it appears as usual.

How can I lose my Windows activation?

View 4 Replies View Related

"printer Settings Could Not Be Saved. Error Code (0x0000000001) Or Something"

Feb 10, 2013

I am running Windows 7 and yesterday my wife bought an HP 3512 printer. It has wireless capabilities, so she thought it would be nice to be able to print from other computers or tablets or phones in our house.I originally had issues even getting it to connect via wireless but it is now connected to my router, has an IP address, and if I log into my router, I see its connection. The printer works fine if I have it plugged in via USB. But as soon as I unplug the cable, the printer goes offline. Now, I assumed that by wireless printer, that meant I would not even need it hooked up to my desktop. Maybe I am wrong on that though.But my main issue is I cannot get the printer shared with the homegroup. If I run the printer troubleshooting, it even tells me that the printer is not shared with the homegroup and I should try to have it shard as administrator. So I click that box then it tells me it found but could not fix the issue. It's still not shared. If I go to the printer, go to properties, then sharing, if I try to click share and apply changes, I get an error saying "printer settings could not be saved. error code (0x0000000001) or something. It simply will not go onto the homegroup. If I add it to the homegroup to be shared, would that allow me to move the printer off of my desk and unplug the USB and still be able to print?Also, still regarding Homegroups. My computer is connected via wire to my FIOS router. A laptop in the other room however, connects wireless. They somehow end up in different networks and cannot join the same Homegroup. Both run Windows 7. I have looked and cannot find why they would be on different networks. They were not always this way, I use to be able to see the laptop on my desktop but no longer can.

View 9 Replies View Related

Files Saved Or Downloaded To Desktop Are Saved As Hidden?

Oct 11, 2011

I'm on a brand new HP computer running Windows 7 and everytime I download a file from the internet or even save files from local programs to my desktop, they are saved as some sort of hidden file...or at least they behave similar to hidden files. The difference is if I open up an Explorer window and browse to my desktop, I can see them there that way, but there is no icon on my desktop for the file. I CAN see the the saved file on my desktop if I turn "view hidden files" on...but when I look at the properties of said files, they are not actually marked "hidden." I can even copy/paste that same file in my desktop and I will see the copied file show up visually on the desktop, but still not the original file unless I browse to the desktop in an Explorer window.When right clicking the desktop, "Show desktop icons" is turned on and I can view all of my other desktop file icons, shortcuts, etc.

View 2 Replies View Related

Windows 7 Desktop Settings Changed Customized Settings After Logging On

Mar 11, 2011

windows 7 desktop settings changed my customized settings after logging on..

View 5 Replies View Related

Sudden Loss Of Keyboard?

Sep 17, 2012

Everything on my computer was fine this morning when I left for week, but upon my return I noticed that my keyboard/mouse wasn't working. I restarted my computer and confirmed that my keyboard works in the bios and whatnot, but when I get to the windows login screen, I get no response from the keyboard or mouse.the mouse is a simple USB one, and I'm using a PS/2 keyboard, so I doubt it's some sort of sudden driver issue.I tried logging into safemode, and I get the same result, can't move my mouse or use my keyboard.Does anyone have any idea how to possibly fix this issue? I'm unable to restore from an earlier state either.

View 1 Replies View Related

Loss Of Administrator Privilege

Dec 18, 2011

I recently did a system cleanse using my anti virus software.i used it primarily to remove unneeded start up programs.in starting it up, my start menu has lost all programs, including folders like Accessories and Paint, Calculator, also my desktop was removed of all Shortcuts.to open a program i have to go to c:// Program files/ program . etc.I now cannot reset the start menu Properties as i get a message saying the "this operation was cancelled due to restrictions in effect on this computer.I only have one user, and my user is administrator. How do i find this restriction and why did i lose all the items.Is this mor edue to my Security Settings or my Anti Virus software.

View 6 Replies View Related

Win7 Upgrade Ram Loss

Sep 12, 2009

Ok well i got a new Dell Studio 435 Tower in april or so i7 920, 6gb 1066 tri-channel, 1gb ATI 4870, 750GB WD Black Caviar... i was running x64 Vista Home Premium and it was smooth as butter... had a 5.9 WEI and was pretty happy with performance.

2 nights ago i saw that the Windows 7 RTM was available on MSDN so i snagged x64 Windows 7 Home Premium... upgraded in place fine but now its much slower than my x64 was!

It takes longer to both boot up and shut down, some programs freeze when opening or closing them... i re took the WEI and it went down to 5.5. For some reason all my other scores shot up to 7.5 except my Ram which fell to 5.5 and my HDD which fell to 5.9 ???

I started investigating and it now says that i have 6GB installed and 1.99GB usable. What? When i was using Vista it said nearly all of it was usable.

I went into my bios... updated it to the newest version along with the intel chipset... in bios it states that i have 2048 available out of 2048 installed??? I have combed my bios and don't see ANYTHING that will let me mess with ram period.

I did the whole start>run>msconfig>boot>max ram, but no matter what i do it always defaults back to 2048 when i reboot my machine and go back to it.

View 6 Replies View Related

Loss Of Network Connectivity

Jun 11, 2009

This has been an issue since I upgraded to 7201. It isn't constant, and seems to be worse when I'm downloading large files, especially multiple files from one source (like an album in iTunes). It is fixed by release/renew (or just letting Diagnostics do that).

If I'm not using a lot of data (regular web browsing, working on a database online, etc), it seems perfectly fine. It is holding so far downloading one track at a time on iTunes, but if I do 2, it drops the connection.

I'm using the Home network config, router is working normally, and I can't recall this happening before 7201. I've reset the router, upgraded firmware, and it only happens on this PC. I've set WINS, tried all settings for TCP/IP 4 and 6, and using the other ethernet port on my motherboard.

More of an annoyance, really, but I can't figure it out and it is bugging the hell out of me.

EDIT: I can still get 1 mb/s on a single download, but trying 2, I get 600/400 for about 10-15 seconds until it disconnects.

View 5 Replies View Related

Loss Of Wireless Connectivity?

Feb 2, 2011

All of a sudden, my wireless adaptor went offline and I wasn't able to detect any wireless networks in the area..

View 1 Replies View Related

Loss Of Wireless Connection?

Jun 26, 2011

I have an acer aspire 5738z laptop with windows 7. I hadan issue with the screen sent it off for repair and it has come back and the wireless Internet won't work. I've tried everything, the wireless will be either very poor and then turn off or just doesnt work at all. When I try and connect to talktalk my Internet provider it says, windows was unable to connect, it has mentioned the wireless adaptor

View 4 Replies View Related

Packet Loss Only In Windows 7, But Not In Xp?

Mar 18, 2012

I have packet loss, and randomly connection loss (but otherwise i have very good pings!) under windows 7 with two different computer with realtek 8111B and 8111E onboard chips. But there is no packet loss under windows xp with the same computers.I tried old, new, and motherboard manufacturer's drivers, new windows 7 system without any antivirus software, disabled windows defender, in safe mode, but still the sameI have no router, just a modem directly plug into the pc.

View 1 Replies View Related

Wireless Signal Loss

Dec 6, 2009

I have new Acer Aspire 5739G laptop and fresh Windows 7 on it.

The wireless card is Intel WiFi Link 5100.

The problem is that wireless works only in short distance with access point - max distance is about 5 meters.

In that distance everything works fine.

But if I go farther or to another room it disconnects.

With other laptops all works fine even on very large distance.

I tried such things (nothing helped):
* uninstall, reinstall or update drivers
* install newest drivers from Acer site
* install newest drivers from Intel site
* tested with xp & vista drivers
* on network connection properties unchecked all things except tcp/ip v4 protocol (microsoft networking,sharing, link layer topology,QoS, TCP/IP v6 ..)
* disabled homegroup
* on adapter properties changed signal frequencies (1,6,11),
* on adapter properties changed standard type to work with: 802.11 b or g
* on adapter properties changed signal to MAX, don't use power saving
* disabled Internet security, firewall
* Changed access point signal broadcasting with no encryption or wpa
* it disconnects from another access point the same way (problem with system not wifi AP)

Maybe something forgot to say, but there was few hours of testing and can't fix it .

View 9 Replies View Related

Windows 7 32 To 64, No Discs, At A Loss

Mar 7, 2012

I have been researching the topic and am at a loss after around an hour of fruitless research. I recently upgraded from xp 32 bit to windows 7 32 bit. I want to upgrade to 64 bit so theres more RAM available and cannot find any information on doing it without discs that doesnt use USB or something. Got an external hard drive what the hell do I do? I downloaded the files but then couldn't open of course bc they were 64 bit files or whatnot.

(my cpu is capable of running it)

View 17 Replies View Related

Windows 7 Theme Loss

Aug 18, 2012

I just turned on my pc today and the windows 7 basic areo theme came up insted of the top quality theme and when i opened ie9 i noiced the greyt theme was comming up on the windows, then another 30 seconds later the bottom bar when all grey, i went o controll panel and it has greyed out the areo theme (blanked it out so i can click on it) , i have been on some other sites and they are telling me to trouble shoot it witch i have, but windows can't find any problems at all.

View 6 Replies View Related

Way To Set GPU On Default Settings Or Reset GPU Settings In Cmd Or Other Professional Way

Sep 23, 2012

Now, just 3 days ago It started the BSOD issue.I realize that my GPU was the cause of this issue. When playing games or open 3d applications the temp goes 30C to 72C (In 15 seconds) then 82C - 85C constant (in about 30 seconds).Now I've been using MSI afterburner to check my temps and at fulload my GPU will be at 62-72C max temperature but now it's 10C even higher then before. No, I haven't fiddled with the voltage I set the GPU voltage to 1.037v which is the safest (been running this almost 8 months!). The GPU is the GTX 560ti.Is there a way to set the GPU on default settings or reset GPU settings in cmd or other professional way. I have uninstalled the drivers, uninstalling GPU, disabled GPU, disabled PCI-E slot and so on by using device manager and the issue still persist. Yes, I also have clean the GPU perfectly and still the temperature goes up to 82 seconds at 30seconds-45seconds. Yes, I have checked everything is set correctly and so on, I am a PC Tech.

Is the GPU damaged? Yes I have looked at this thread: Stop 0x124 - what it means and what to try Mainly, I know its the GPU straight away, I tried checking old drivers, new drivers, another GPU overclocked software such as GPU tweak and EVGA Precision. I am thinking it's the GPU is damaged or the PCI-E is damaged (I have another PCI-E slot on my system and the issue still there). It might be the PCI-E frequency? but it's set to 100 which it meant to be, I just hope is software related because I don't have the money to buy a new card. Did the dump files help?

View 4 Replies View Related

This Photo Cannot Be Saved?

Mar 22, 2012

My sister sends me jpeg photos from her phone as attachments in gmail. In the email, the preview pic looks normal. When I click View, the pic is enlarged, but flipped 90 degrees. If I download the pic, it's flipped 90 degrees. If I open the pic in windows live photo gallery, I can rotate it, but will get a bunch of pop up error messages saying This photo cannot be saved because of a problem with the photo's file properties. Then it says there's a problem with windows live photo gallery and shuts down. This pic flipping in gmail started about a week ago. Previously her pics displayed correctly. She says she's doing nothing out of the ordinary. I just tried loading the photo into MsPaint. I was able to rotate it and save it.

View 2 Replies View Related

Windows 7, Everything Saved Is Gone?

Jun 3, 2011

Yesterday i saw that all my photos and music and everything else is gone i dont even have the folders anymore.

View 2 Replies View Related

Loss Of Wirelss Connectivity In Windows 7?

Sep 26, 2012

I recently downloaded updates from MS and since rebooting I have lost all wireless connectivity. When I ran ipconfig /all in a command window it shows ethernet connection but not wireless. In network it shows wireless card is connected but there is no TCP/IPv4 or 6 connectivity. I am using Intel(R) WiFi Link 5100 AGN wireless adapter. I have updated to the latest drivers for the adapter but NO success!Diagnostic message is about windows not being able to bind to TCP stack etc.Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10Processor Count: 2RAM: 4090 MbGraphics Card: NVIDIA GeForce G 105M, 512 MbHard Drives: C: Total - 464838 MB, Free - 82861 MB; E: Total - 381554 MB, Free - 171085 MB; F: Total - 2861578 MB, Free - 510054 MB; G: Total - 476939 MB, Free - 64575 MB;Motherboard: Packard Bell, SJM50MVAntivirus: BullGuard Antivirus, Updated and Enabled

View 14 Replies View Related

Sudden Loss Of Internet Access?

Jan 10, 2013

For the past year or so I've been using a telstra broadband manager USB to connect to the internet, now all of a sudden I am getting no internet access, not just from the broadband manager but from other networks aswell. I have tried my phones hotspot, other USB's and WiFi's to none of them working.It would start up and work for about 15 seconds, and then internet access would just cut out completely. I have AVG Internet Security 2012 installed and I have tried disabling the firewall (Windows firewall also) and yet it still doesn't work.

[code]...

View 1 Replies View Related

Loss Of User Account Data?

Feb 2, 2013

I use a Macbook for my personal use usually, but when I turned on my PC after not using it for a couple of months, all of my user information is gone: Documents, music, everything. The only thing is I don't think it's gone, I can't access my music using iTunes on that machine, but I can access it using Windows media player. If I try to open OneNote pages, I get nothing. I have run Spybot and AVG antivirus. It seems as though my user account information is being hidden. Other user accounts (my wife's and a guest account) are working just fine. I would prefer not to return to a restor point, as I don't even know when this was lost.

View 4 Replies View Related

2 Networks Intermittant Loss Of Connectivity

Jun 28, 2011

just came over from XP Pro...had to get a 64-Bit machine; & went w/ an ASUS running Win7 Home...which I upgraded to Pro.I began to lose my internet connectivity, intermittently & noticed that, when it happened, the Network icon in the task bar showed TWO networks...(???).one labeled 'Network - No Internet Access'& the other labeled: 'Unidentified Network - No Internet Access'.Sometimes the problem would go away if i rebooted, but eventually it became a permanent dilemna.Verizon checked my modem...said it was fine, but sent me a new one anyway. Same problem continued. Took the PC back to Best But & swapped it for a new one...& it's been fine 'till this evening. It denied me access once.I rebooted; & got it back. Obviously, something is amis w/ Win 7 Pro in the way the network connection is set up.can't be two modems or two computers.I noticed it seems to happen right around the time that the OS goes looking for windows updates not in the same category.

View 1 Replies View Related

Command Prompt: Loss Of Functionality?

Apr 5, 2011

Whenever I type a certain command into the Command Prompt (I'm not sure if it's only admin-only commands only, probably is...), I get an error saying the command is not recognised? I was trying to flush my DNS and renew my IP using IPConfig when it happened. Then, I decided to test another command "sfc /scannow", that didn't work either (note: CMD was running with Admin privileges too). I could perform these commands fine before. And I'm on an administrator account too.

View 5 Replies View Related

Prevent Loss Of Window Focus?

May 5, 2012

any time a program, ANY program (doesn't matter if it is an installer or what) is not programmed to open or run in the background, if something happens in it, the focus gets stolen from where I am (say Firefox or a Microsoft Word Document), even if the application doesn't actually pop up, then I have to re-click on the program to regain focus and continue working.The real problem is when things pop up unexpectedly as I am typing and I hit the space bar, which results in my accepting something I may not have wanted to.Is there any way at all to FORCE a global "stay in the background" for any program that doesn't have focus or to prevent programs from stealing the focus?I tried the mouse hover trick, but that's an annoyance because if I accidentally bump it off of my active window, whatever one it comes on top of becomes active and is only worth it if I'm working in a full screen window (which is maybe 30% of the time).I am running Windows 7 Home Premium x64.

View 9 Replies View Related

Hard Drive Memory Loss

Jan 2, 2010

I bought a laptop few days ago ,OS windows 7and 320 GB hard drive,I am losing so much memory more than 35 GB so far without instaling any thing on it ,I just did the recovery disc thing when I started ,I'd love to know where did this memory go ?

View 5 Replies View Related

Software To Rip Audio From DVD To Loss-less Files

Aug 11, 2010

I have quite a few music DVDs and would like to rip the audio to high quality (flac or wav) files. Quality is important to me.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved