I bought a laptop few days ago ,OS windows 7and 320 GB hard drive,I am losing so much memory more than 35 GB so far without instaling any thing on it ,I just did the recovery disc thing when I started ,I'd love to know where did this memory go ?
View 5 Replies
how much hard drive memory does a Windows 7 64-bit pro take up?
View 9 Replies View Relatedi have a new samsung laptop running windows 7 64bit.when i first set it up the 1tb hard drive partitioned. that was ok, everything worked fine. a couple of days later i couldn't start windows, no idea why. as it was new and not a lot of files on it yet i reset it to when i first recieved it. now the hard drive shows 2 partitions ,one of 360gb and one of 54mb.
View 2 Replies View RelatedA week ago I had same problem 130 gig of hard drive memory and was vanishing throughout the day.it got down to 15 gig then I dont know what i did but it came back.Now yesterday same problem memory is vanishing and I went from 130 gig to 24 gig.
View 1 Replies View RelatedMy friend told me to fix his laptop and when he brought it to me i did a diagnostic test for the Hard Drive and Memory. The memory came out successful but the hard drive did not. I was wondering if I could replace the hard drive with my suggestion link below. My only concern is that will the HD will fit. He said, he would like a little speed boost if possible so I'll be giving him a 7200rpm HD.
View 1 Replies View Relatedi have like a thousand or close to thousand videos saved on my computer and they all 1 gb. one i get to 1000 of those videos, sayin they the same size, my hard drive will be full. is it like ipod memory, cause i like to fill up my computer with videos, movies?
View 9 Replies View RelatedI just partitioned my external 3.0Tb hard drive using the device manager in Win 7. At first I had one partition of around 2.8Tb, I shrunk the existing partition to around 1.9Tb and then Windows created 3 partitions instead of 2. I ended up with 1 partition of 1.9Tb, 1 partition unallocated of around 100Gb and a 3rd partition of 746Gb unallocated. I was then able to create a simple volume on the 100Gb partition which left me with the 746Gb partition unallocated. When I try to format the 746Gb partition all the options are greyed out - I cannot create a simple volume or delete the partition. I also cannot extend my other 2 partitions to use the unallocated space. When I delete the 100Gb partition I can then extend the 1.9Tb partition and end up with a 2Tb partition and the remaining 746Gb unallocated. Is there any way to recover the 746Gb of unallocated space? Seems a waste to have a 3Tb drive that only has 2Tb of useable space.
View 6 Replies View RelatedI am trying to format my hard drive and reinstall windows 7 as my hard drive is running out of memory tried removing some programs but is not doing much my hard drive is 232GB I only have 28GB left, how to format my hard drive.
View 9 Replies View RelatedI had a power loss while running on battery (it still showed power left, but suddenly shut down anyway) and when I restart, it reports that the Windows is not activated and Window is not genuine and system might be a victim of "counterfeiting."
Is this a virus (I have MSE on continuously and about once a week scan with Malwarebytes)? I have run 'sfc /scannow' with filtered output ('findstr /c: "[SR]" c:.....logsCBSCBS.log" and it appears as usual.
How can I lose my Windows activation?
i've changed drive letters of my hdd and partitions so that coused loss of user;s files foldr content. before i have done that change there were two partitions - C and D. on parition D were my music, my pictures and my videos content, but after i changed drive letter from D to E all those folders are gone. i can make shortcuts, but i want it to be like it used to be when i have installed Windows 7.
View 2 Replies View RelatedI know about the immediate 'loss' of disk space owing to the two different methods of measurement. 1Tb to 931Gb - it's annoying, but I'm used to it.No, before a defrag by Fixbee I had 701Gb free, afterwards - in a matter of 2 hours - I had 537Gb. Obviously, I'm not going to use this product again, where a clean-up is obviosly a 'dirt up', but how do I undo the damage that it's caused - especially if it's not the only 'clean up' tool that might do this?
View 6 Replies View RelatedI currently have a 500GB SATA drive with 2 partitions, C: has Vista Ultimate in it and most of my (Really Important) data is in D:- I do not have an external drive with enough space to back up both partitions, only C: -- If I install Windows 7 on C:, will I also lose all the data in D: (Partition 2)?I want to be 100% sure I won't end up with data loss on D: if I do a clean install on C:
View 11 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
I have formatted my Acer Aspire 5552 and Installed Windows 7. Previously, my ''main drive'' was my Local Disk (D: ) (450GB) and now it is Local disk (C: ) (20 GB) So there is no room for my programs, etc.. so how I swap them around?Have tried to save the programs on Local Disk (D: ) , but then they do not work.
View 2 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have a Toshiba Satellite L655-1EM laptop running windows 7 home premium 64bit.OEM came pre-installed. I've had the laptop about 6 months.It works great but I seem to get the BSOD quite a lot. I noticed it only seems to happens when I'm using either of my external hard drives or SD cards. Usually when I am transferring a batch of large files between drives.
View 2 Replies View Relatedso I have a laptop that has around 750GB of space on it but it is split into two parts:
250GB: Drive D
500GB: Drive C
I'm running out of space on drive C and I would like to extend the space on drive C from drive D seeing as drive D is completely empty.
Also is there a method where it will not delete the files that I have on drive C?
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedAlmost new Inspiron 5720- Home Premium. i7 quad.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
