i've just installed 8GB OCZ Gold DDR2 RAM on my Asus P5Q Pro Turbo board, the timings on the RAM state PC8500 1066Mhz 5-5-6@2.10v. I have checked in the BIOS and the frequency was set to auto and the voltage was also set to auto, I have set these to 1066 and 2.10 respectively but when I checked with CPU-Z it reports frequency 534.9 and voltage 1.80. I made sure I saved the changes before i exited the bios
View 4 RepliesJust putting together a list for my new October build for the Windows 7 launch and am going to go with a "Raid 1" set up using 2x wd caviar black 1tb drives.
I have not gone down the raid route before but understand that raid drivers needed to be loaded by floppy during installation.
I was hoping not to have to buy a floppy drive so wanted to know if in Windows 7 USB support was available during install to allow raid drivers to be installed from a mem stick when prompted??
ati-bonefish motherboard windows 7 32bit
View 3 Replies View Relatedwhy does my shift key stick and caps lock stick
View 3 Replies View Relatedthis message has started showing up, and subsequently, various websites just freeze and I have to X out of the page
View 3 Replies View RelatedI had 4gb or ram but then I added another 4 to make 8gb or ram, but I am getting bsod. How do I change the voltage to match the ram?
View 5 Replies View Relatedhow to fix a computer that say system battery voltage low....and it shut down...
View 3 Replies View RelatedI have a i7 860 desktop (8 gb ram) which tends to freeze on one of the data applications that I run. Using the 'performance monitor' I discovered that the freeze occurs when the 'frequency' goes above 100%. At no point does the cpu utilization exceed 15%. Several calls to the vendor have failed to resolve the issue or even educate me. The question I have is what is this 'frequency' and two, why does it cause the application to freeze while the 8 cores are relaxing?
View 2 Replies View RelatedI have xps m2010, it uses notebook graphic mobility radeon x1800. the card is so old that many of the recent GPU software can't seem to read it properly. GPUz was able to see core/memory clock and memory but unable to see temperature or voltage.
GPU meter/PC meter just fails to see it at all, not supported it seems, same goes for GPU monitor or GPU observer, cant see it.
however temperature shows up in Hwinfo but no voltage either. I was able to download ATItool and able to change it's core/memory clock speed but it doesn't have voltage control.
what I want to do is for it to run at a lower VID/clock when idle, something like CPU speedstep or nVidia powermizer. when idle, lower voltage, temp and clock speed, when used, back to highest etc.
why I can't increase the CPU voltage beyond 1.346000 V on my MSI 990xa-gd55 motherboard? I've tinkered with practically everything in the BIOS
View 9 Replies View Relatedwhat is the wifi frequency
View 2 Replies View RelatedI have a problem with my second ram slot, does anyone know how to properly adjust the voltage to my ram slots through the BIOS of a Gigabyte P55A-UD3P Motherboard.
Also if anyone can tell me the desired voltage for each RAM slot.
I'm working on a friend's computer and she's having more BSODs lately. I'm trying to figure out the cause here. I've run MalwareBytes and found nothing. I don't know how to interpret these dump files, and I can't get it to blue screen for me.
System Specs:
HP - HPE-137c
Windows 7 Home Premium 64-bit
Core 2 Quad Q9300 2.5ghz
8GB RAM
Norton 360 =/
My native resolution is 1600x1200 but when i change my resolution to 1600x1200 it says 'frequency out range'. I have intel g31 without other graphic card.Then i installed gma driver it shows complete list of all resolutions but i cant set any resolution above 1600x900.
View 7 Replies View RelatedI have been having a lot of problems with my turtle beach transmitter blocking any wireless signal coming into my room, which is really odd, anyway after a few messages to the company, they have told me to changed my router frequency from 5ghz to 2.4ghz and that should solve the problem.Now I have sky Fibre, and have one of the Sagem N routers provided by sky.I have gone into the router settings and I cannot find anywhere to change a frequency.I thought the router would have been n a 2.4ghz frequency anyway
View 2 Replies View RelatedWhy is it that every time i open my window 7 it always appear a display error "over frequency" to my monitor?
View 1 Replies View RelatedAs my tower's motherboard shorted, i'm stuck with a six year old HP Pavilion ZV5000 laptop. I have two (don't ask ), and i'm using the better of the two, with a 2.0GHz AMD Athlon 64 'Clawhammer', 40GB IDE HDD, 512MB RAM (2x256) and 64MB of video RAM. I would ultimately like to upgrade the RAM to the 2GB max., but that would cost 60, which I don't have to spare at the moment. A friend of mine recently upgraded the RAM in his laptop from 2x512MB to 2x1GB, and offered me the 2x512MB sticks. Obviously, my first concern was was it the right type. Off the top of my head, the ZV5000 takes SODIMM 333MHz RAM. I enquired, and my friend said the RAM he has is 600MHz (from what he could remember).If they are the right physical size, would the difference matter/damage the laptop?
View 3 Replies View RelatedI've got problem on my laptop since build 69XX, now I'm on RC and problem is still here... Power plan settings doesn't contains Max CPU usage option and computer runs at full 1,6GHz on any power plan.
View 9 Replies View RelatedDoes anyone know a program or a way to make the processor work at a specific frequency?e.g. = if the processor is 1.5GHZ , to make it work at 1GHZ when i want to , using a program.
View 9 Replies View RelatedHave been getting BSODs more and more frequently over the last week. Can't think of anything special that triggered the behaviour though. It mostly happens when the computer idles and I'm doing other stuff, and doesn't seem to relate to computer load etc.
Did a bit of digging myself and used WhoCrashed to identify Comodo Backup and Daemon Tools as possible culprits. They are both uninstalled now. Installed drivers for the bluetooth which were missing and giving an exclamation mark in device manager. After that no exclamation marks or errors there.
Today I did a full memorycheck with Memtest86+, which passed all runs.
Got another BSOD couple of hours ago (0x00000124), with no lead from WhoCrashed on the root cause so now I resort to asking the gurus.
i had installed windows 7 in my laptop,but accidentally i installed it in D-drive,now both C & D drives are showing program files,program files x86,windows folders,my D drive is full
View 1 Replies View RelatedI will probably be getting this motherboard Gigabyte GA-Z68A-D3H-B3 rev. 1.0 Socket 1155 ATX Motherboard Intel Z68 Express Intel Core i7 i5 i3 LGA1155 Processors, Dual DDR3 2133 SATA III SATA 6.0 Gb/s Gigabit LAN SLI CrossFireX USB3.0 HDMI DVI 7.1 Channels Audio-Best Computer Online Store Hous I will be putting in 4 GB of RAM. Do I need to get 2 - 2 GB or can I use 1- 4GB stick? I was thinking if I can used a 4 GB then I can just buy another 4 GB if I decide to go 64 bit.I am shying away from going 64 bit now due to having MS Office 2003.
View 9 Replies View Relatedi am reading a lot a from people not upgrading to a new build because they don't have a spare DVD or a 4 Gb USB stick handy.
Well you don't need all that.
Simply use your favorite mounting tool (i use Magic Disk), mount the image, start the upgrade process.
You might see an message about Magic Disk having to be reinstalled, dont worry, and continue.
You'll see, upgrade works just fine without wasting DVDs or time coping files to a USB drive.
Windows 7 on USB stick, is it possible?
View 2 Replies View RelatedThis is a 1GB thumb drive and its been working just fine. Put some files on it with this machine with the intent of transferring to another machine (which did not come to pass).
View 9 Replies View RelatedI am trying to install a new gig stick of RAM. I took out the old 256 stick but cant start windows with the gig stick in the same slot. I've found some places in the device manager that say RAM and was about to delete them hoping it would let me install the new gig stick but I wanted to post this first to get some help from the pros. Im sure this is a simple problem, so how do I fix it so I can put this gig stick to good use!?
View 7 Replies View Related2.4 GHz single core
1gb ram
256mb video memory
Advisor says not capable of Aero. Stationary computer.
Upgrade to Windows 7 or keep XP?
Is it possible to do an upgrade from 7068 x74 to 7077 x64 from a USB stick?
Do I extract the iso file to the usb stick and then go from there?
My wife keeps most of her data on a USB stick so that she can easily move it around her 3 laptops (in 3 different locations). This morning, the stick was dead. It did not say a piep, no power, nothing. Despite my constant preaching about the importance of backups, she had, of course, not backed it up for a long time.Well, I tried an old trick that may possibly help others. I put it into the fridge for a couple of hours. And low and behold, after that I was able to read the thing and copy all her files. Now she is a happy camper again. So if you have the same problem one day, try the fridge. No guarantee that it will work for you, but it did in this case. I have used the same trick with dead disks with some success.
View 1 Replies View RelatedI recently purchased a Kingston 16GB DataTraveler SE6 USB 2.0 stick. It works without fault in my 2 laptops running Windows 7 (x32), it also works perfectly in my car stereo & Android tablet. It is formatted as FAT.However on my desktop, running Windows 7 (x64) 9 times out of 10 I will get a message saying it needs formatting. 1 out of 10 it will work fine. Even if i try and format it it fails to format, both quick format and regular format.So i've concluded that the USB stick is fine and it must be an issue on my desktop. The desktop is a fairly new build, 3 months old and I'm experiencing no other issues with it. I use a number of other external drives on usb, mini memory sticks via readers and the like without issue. All drivers in Device Manager are reporting fine. i don't unfortunately have another USB stick to test.
View 9 Replies View RelatedI installed one of these recently. Tunes in all SBS channels, but NO C2, C7, C9 or C10 channels.
Anyone got an idea on what might be the problem.