I was playing Hitman Absolution all day, ended up falling asleep with my laptop on.it ran out of battery and when I woke up, it was drained of all power, as per usual.However when I tried to start it up, it went into startup repair and then said it couldn't start windows.
View 4 RepliesI am currently using windows 7 ultimate x64. I was in the middle of a process restoring my computer to a few days back and suddenly it froze. I did a power shut down and when I turned it back on, I wasn't able to get back into windows. I was brought to startup repair and it gave me errors. 'Boot manager failed to find OS loader'. There was options for restoring, but all my restore points were gone. Recovery wasn't able to find image backup.
"Startup repair cannot repair this computer automatically". I was told to go into safe mode to restore, but whenever I enter safe mode, startup repair would take over and shows the same errors, also I read a tutorial using a repair disc ( made a copy of it on someone elses ultimate x64 computer) and I get the 0x00000e9 error if i boot from disc. What can I do? As of now I don't have the installation disc with me. I wont be able to get hold of it until tomorrow. There's a lot of important files in that hard drive and I really cant lose any.
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies View RelatedMy computer just shut itself down on its own last night.Upon restart all I get is an HP screen that says hit esc. to go to startup menu, and it takes me to a screen with like 5 different options. If you don't hit esc at the beginning it goes to a black screen with a white line looks like a cursor line.
View 14 Replies View RelatedCreated it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
i am using windows 7 with 2 gb ram and 500 gb hardisk. After booting up, in a few minutes it starts giving not responding message. I even could not start the task manager. In fact windows is stuck. I used to restart my system to continue my work
View 5 Replies View RelatedI am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies View Relatedafter turning on my laptop that have win 7 something happened <after the win 7 logo and the moving 4 colours of the start up a blue screened error appears say "a problem has been detected and windows has been shut down to prevent damage to your computer and at the bottom of the message Technical information *** STOP: 0x0000007B(0x80786A50,0XC0000034,0X00000000,0X00000000)" > and i tried to install a new windows drive C doesn't appear and the other drive is not a NTFS so i couldnt install a new windows even turning on the existing windows to take my files
View 4 Replies View RelatedMy Laptop running Windows 7 gives an error when trying to boot and leads me to the Startup Repair. Startup Repair then gives the following message:Startup Repair Cannot repair this computer automaticallywith an option to Send Information or not to Send Information The Problem details log leaves the following information:Problem signature:Problem Event Name: StartupRepairOfflineProblem Event Signature 01: 6.1.7600.16358Problem Event Signature 02: 6.1.7600.16358Problem Event Signature 03: unknownProblem Event Signature 04: 21201029Problem Event Signature 05: External MediaProblem Event Signature 06: 11Problem Event Signature 07: NoBootFailureOs Version: 6.1.7600.2.0.0.256.1Locale ID: 1033I tried using the Windows 7 disk to go back to a previous restore point before the problem occurred and I received this error message again after starting with out the Windows 7 disk
View 1 Replies View RelatedEver since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies View RelatedI have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies View RelatedOn start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies View RelatedStart up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies View RelatedI have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies View Relatedi use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies View Relatedmy windows 7 program will not boot up its ask to put in repair disk is there any other way to fix it myself? how much will it cost
View 3 Replies View RelatedI searched the threads for an existing post and I couldn't find one that matched my problem. Sorry if a solution has already been posted somewhere.
I have a new Acer 1410 w/ 4GB of DDR2 memory and a 1.6 CULV processor. It came with Vista Home Premium installed, but I downloaded Windows 7 Ultimate from my technet subscription. Because I don't have an optical drive I had to install from a USB stick. I did this without any problems at all.
Windows 7 has been booting fine and running great for about a week now. I haven't recenly loaded any new software or drivers. Yesterday I shut down my laptop normally; when I tried to reboot an hour later I was shown the "loading files" screen and was then taken to the Windows Startup Repair option. Windows spent an hour trying to repair whatever was wrong with my startup and I was finally given an error message that it couldn't make any repairs.
I tried going to the DOS prompt and fixing the boot manager and boot file; interestingly all this did was suddenly give me the option to boot Windows 7 or Windows Vista (!!!). I still get the Windows Startup Repair when I try booting Windows 7. If I try to boot Vista (I was curious) it takes me all the way to the login screen but then tells me I have files missing if I try to login, which is fine - I wasn't trying to set up a dual boot anyways.
Here's the part that's really got me stumped: If I try booting my laptop into install (using the bootable USB stick I created to setup Windows 7 on my laptop) I have the option to repair my computer. When I choose this option it of course takes me to the advanced repair options where I can choose Windows Startup Repair; it runs the repair and tells me it doesn't find any problems with my computer and to go ahead and start my computer normally. Of course, when I reboot and remove the USB stick my computer doesn't boot normally; I'm taken back to the "loading files" screen and then to Windows Startup Repair where I'm told that Windows can't repair my startup.
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies View RelatedI have a computer where it keeps booting into the "System Repair" menu. It hasn't done this before.
Recently had lightning struck a transformer. Phones all rang and tv went bizzare! Lucky we had a surge protector.
Well...the computer wasn't doing this before. It use to boot fine but after the transformer problem it starts to boot. Then goes into a screen where it says "Launch System Repair" and "Start windows normally". Even if I select start windows normally it would still go into the system repair menu. I ran PC Check and my hardware all passed. My hard drive passed the SMART self extended test too.
Right now I'm booting off Hirens 15.1 into Mini XP.
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
My pc, which is running Windows 7, is continuously booting to repair mode and 9 times out of 10 just boots to a black screen with mouse cursor at which point I have no option but to do an illegal shutdown. I have tried to run a system restore but an error message 'an unspecified error occurred during system restore (0x80070002)' keeps popping up. On the occasion it gets through to the desktop it says that it was successful. Next time I shut down and go to reboot I have the same problems. Also when I go to the internet the homepage has defaulted [URL] which looks similar to google but without the banner.
I dont think this is malware but possibly a critical windows update that has corrupted. If I get to desktop and then shutdown there are 11 updates that are downloading but on reboot the you can see that the updates are loading properly. The only thing I have changed recently is I have updated the printer drivers. For no reason, all of a sudden the other day the printer stopped working and once I updated drivers it was fine. This pc has worked fine for months until the latest set of updates came through. On further reading it looks like searchnu is malware. Could updating a driver really have installed this.
Randomly, my computer is no longer able to boot from my OCZ Agility 3 SSD. By randomly, I mean it was working just fine this morning, but no longer. I can't remember if I changed or updated anything.
Well I then went and inserted the Windows 7 repair disk. A list pops up saying to select my OS, but nothing is listed. I selected load drivers, and I'm able to navigate to the ssd successfully and view all of the files. I even plugged it in to the computer I am using now and was able to back up the more important documents in case I will need to do a reinstall. (I would rather not though).The repair utility doesn't fix the problem, and I navigated this forum and many others trying to find similar problems to mine.
Windows 7 Ultimate 64-bit
AMD Phenom II X4 965
Galaxy GeForce GTX 460
16 GBs Corsair RAM
I do have two other hard drives on the system that I use for general programs and another for raw video storage.They are disconnected now, so I don't see how they would affect the problem.
Whilst looking for a keygen for Microsoft Office 2010, I must have got a bad file.. yay. When I clicked on the app, my computer immediately went to the Startup Repair window and has been relentless. I've tried opening in SafeMode thru F8 for a system restore, no good. And attempted to start windows normally through F12.
Finally, the Startup mode is over and I'm attempting to turn it back on ... and we're right back into Startup Repair.
the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies View RelatedMy hp windows 7 is show me an error message everytime i try starting it. The MESSAGE IS " DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
View 2 Replies View RelatedUsually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies View RelatedI am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.
View 12 Replies View RelatedWindows will only boot into startup repair no matter what. The issue is startup repair was unable to fix the problem. [code]
View 3 Replies View RelatedI have a Sony Viao with Win 7 Home Premium and I just deleted some form of Trojan with MS Security Essentials and then I ran windows updates before I restarted the machine. Windows update installed some security updates along with Service pack 1 and IE9. Now the computer will not load Windows. It goes straight to the startup repair but cannot fix the problem. There is not restore points other that when SP1 was installed and I gives an error every time I try to restore it. I can get to a command prompt and I have tried to run sfc /scannow but it tells me there is a system repair pending which requires a reboot and then does nothing. I also tried check disk(just as a last chance) but that didn't do anything.
View 2 Replies View Related