I have a computer where it keeps booting into the "System Repair" menu. It hasn't done this before.
Recently had lightning struck a transformer. Phones all rang and tv went bizzare! Lucky we had a surge protector.
Well...the computer wasn't doing this before. It use to boot fine but after the transformer problem it starts to boot. Then goes into a screen where it says "Launch System Repair" and "Start windows normally". Even if I select start windows normally it would still go into the system repair menu. I ran PC Check and my hardware all passed. My hard drive passed the SMART self extended test too.
Right now I'm booting off Hirens 15.1 into Mini XP.
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
Booting with the 32bit dvd does not bring up the Repair service but goes onto Starting Windows screen from the dvd itself. Then PC lockup. Every time.How to stop DVD at booting to bring up System Repair service?
I'm trying to restore my Windows 7 64bit machine to its factory settings at the moment, and I've tried the following but they've all failed.1.) Boot up and hit F8, select Repair computer, but then it just boots Windows normally.2.) Create System Repair Disc, and from BIOS boot-up, choose boot from DVD-RW, but when it does that and loads Windows files, Error 0xc000000d and winload.exe missing comes up.3.) When I tried to insert the installation disc that came with my computer, it's not recognized and nothing happens (during boot from DVD-RW).*Note - Just today when I tried to do a system restore, it said that I had no previous restore points, but I just restored a week ago, so that might add some info.
I searched the threads for an existing post and I couldn't find one that matched my problem. Sorry if a solution has already been posted somewhere.
I have a new Acer 1410 w/ 4GB of DDR2 memory and a 1.6 CULV processor. It came with Vista Home Premium installed, but I downloaded Windows 7 Ultimate from my technet subscription. Because I don't have an optical drive I had to install from a USB stick. I did this without any problems at all.
Windows 7 has been booting fine and running great for about a week now. I haven't recenly loaded any new software or drivers. Yesterday I shut down my laptop normally; when I tried to reboot an hour later I was shown the "loading files" screen and was then taken to the Windows Startup Repair option. Windows spent an hour trying to repair whatever was wrong with my startup and I was finally given an error message that it couldn't make any repairs.
I tried going to the DOS prompt and fixing the boot manager and boot file; interestingly all this did was suddenly give me the option to boot Windows 7 or Windows Vista (!!!). I still get the Windows Startup Repair when I try booting Windows 7. If I try to boot Vista (I was curious) it takes me all the way to the login screen but then tells me I have files missing if I try to login, which is fine - I wasn't trying to set up a dual boot anyways.
Here's the part that's really got me stumped: If I try booting my laptop into install (using the bootable USB stick I created to setup Windows 7 on my laptop) I have the option to repair my computer. When I choose this option it of course takes me to the advanced repair options where I can choose Windows Startup Repair; it runs the repair and tells me it doesn't find any problems with my computer and to go ahead and start my computer normally. Of course, when I reboot and remove the USB stick my computer doesn't boot normally; I'm taken back to the "loading files" screen and then to Windows Startup Repair where I'm told that Windows can't repair my startup.
I was playing Hitman Absolution all day, ended up falling asleep with my laptop on.it ran out of battery and when I woke up, it was drained of all power, as per usual.However when I tried to start it up, it went into startup repair and then said it couldn't start windows.
My pc, which is running Windows 7, is continuously booting to repair mode and 9 times out of 10 just boots to a black screen with mouse cursor at which point I have no option but to do an illegal shutdown. I have tried to run a system restore but an error message 'an unspecified error occurred during system restore (0x80070002)' keeps popping up. On the occasion it gets through to the desktop it says that it was successful. Next time I shut down and go to reboot I have the same problems. Also when I go to the internet the homepage has defaulted [URL] which looks similar to google but without the banner.
I dont think this is malware but possibly a critical windows update that has corrupted. If I get to desktop and then shutdown there are 11 updates that are downloading but on reboot the you can see that the updates are loading properly. The only thing I have changed recently is I have updated the printer drivers. For no reason, all of a sudden the other day the printer stopped working and once I updated drivers it was fine. This pc has worked fine for months until the latest set of updates came through. On further reading it looks like searchnu is malware. Could updating a driver really have installed this.
Randomly, my computer is no longer able to boot from my OCZ Agility 3 SSD. By randomly, I mean it was working just fine this morning, but no longer. I can't remember if I changed or updated anything.
Well I then went and inserted the Windows 7 repair disk. A list pops up saying to select my OS, but nothing is listed. I selected load drivers, and I'm able to navigate to the ssd successfully and view all of the files. I even plugged it in to the computer I am using now and was able to back up the more important documents in case I will need to do a reinstall. (I would rather not though).The repair utility doesn't fix the problem, and I navigated this forum and many others trying to find similar problems to mine.
Windows 7 Ultimate 64-bit AMD Phenom II X4 965 Galaxy GeForce GTX 460 16 GBs Corsair RAM
I do have two other hard drives on the system that I use for general programs and another for raw video storage.They are disconnected now, so I don't see how they would affect the problem.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
XPS L401X Base Genuine Windows(R) 7 Home Premium 64bit (English) Intel(R) Core(TM) i7-740QM Processor 6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB) 640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
I installed linux along side win7 dual boot system. when i removed linux partitions ex4, my system become unstable after all I had to reinstall win7 too. But this time win7 sp1 dvd scratch less media, it could not boot my system. sometimes messages showed "mbr not found" sometimes "ntldr missing" then used simple win7 dvd "not sp1" it booted my system and installed properly. But still problem is there win7 sp1 dvd not booting my sysem. is it bad file system problem or what it is?
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
Every time I start up my Windows 7 Home Premiuem x64 laptop, I get the startup repair screen. It always says that the problem cannot be fixed; this has been going on since last night and I've tried several methods, none of which seem to work. It won't even let me access the login screen; as soon as I start my laptop it goes straight to startup repair.
I've tried to run the Windows 7 CD to repair but it does see any operating system or recovery points, is there another way to get my computer to start up?
Got my stuff ready to reformat, only to realize I don't have a Windows 7 recovery disc.I created a System Repair Disc using Backup & Restore in control panel but I'm unsure whether this is what I need to do a complete reinstall?I wanted to follow this guide to do a complete reformat, not a recovery.
I have a hp g62-231nr laptop and it broke before sent it out, got it fixed and everything was great. about four or five months go by and one night i was playing games on the laptop, the laptop died plugged it in and went to sleep. woke up in the morning to a black screen says media cable something something no bootable device please insert bootable disc and press any key. I downloaded the windows 7 system repair disc and popped it in it loads up says there is no operating system and load drivers cant find any drivers but there is a hard drive disk named Boot (x and two removable devices, the system repair disc in the dvd drive and removable device C. I cancel and press next and be brought into system recovery menu I click on startup repair or system repair. It tries to find problems than says cannot repair windows automatically I click details and this is in the white box.
Problem Signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown Problem Signature 04: 0 Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
I exit out and cannot do system restore memory test is 100% ok. BIOS system diagnoic says error code 03f0 Hard Drive Not Exist the main BIOS menu says the BIOS system is idle. Version for BIOS system F.17 i tried the recovery disks but it says that windows does not support the media on this device. I also have an .iso file of windows 7 home premium dvd but it doesn't do anything so im thinking its a bad .iso copy of windows somehow or I burned it wrong maybe? If there's any other information needed i will gladly post it just ask. also I cannot get to logon screen on startup. The hard drive makes the same soft spinning sound not beeping or anything. I need this computer for work its a business laptop. also i cannot access system recovery from F11 the words show up in bottom left corner on startup but even if you repeated hit f11 or hold it down it brings screen to black screen media cable failure check cable exiting pxe-rom..no operating system etc.
I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command prompt doesn't work either.
sony vaio PCG-71314L on turning on, hangs at "windows is starting" for ever F10 says "disc read error" F8 says "no operating system found" booting/repairing/reinstalling from CD hangs at "windows is loading" for ever
how could i get it to boot/repaired/reinstalled?losing all data on HDD is fine, just need to make it work again.
I have a laptop without CD/DVD burner. Tried to create System Repair Disc from Windows Backup Restore tool but it does not recognize virtual CD drive, networked CD drive, or flash memory as a target to write the Repair disc. I do not have an external USB CD/DVD burner and don't want to buy one just to do this (I can normally read/write CD/DVDs via network to my tower PC). I've researched many sites and have found no clear solution. I've created a bootable USB flash and can bring up the Norton tool, but can't find the files to even copy over to create a repair tool. Would appreciate if someone has actually done this to share how they built a USB flash version of the Repair disc.
I installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
I am attempting to run a complete system recovery (factory restore) on Windows 7 using a recovery partition. Last time I ran the recovery, I ended up having a lot of problems with system programs not being installed correctly, and with the system administrator account. Now, when I reboot and use the F8 option to bring up the boot options, I do not have an option to "Repair your computer" as I had before. I also tried rstrui.exe through the command prompt, but it only tells me that "No restore points have been created on your computer's drive. To create a restore point open System Protection."
I also checked my drives through DISKPART to make sure there were no problems with the recovery partition, but it is showing up normal. On the Windows knowledge database it said that if the system recovery options are missing, then the system is not installed with the options or they were disabled by the network administrator. Given that I had no problems accessing these the last time I ran the recovery, I'm assuming something happened with the account. I am set up with 1 user in the system, which is the administrator.
1) Re-enabling the options so that I can access the "Repair your computer" options on the boot menu.
2) Run the system recovery options without having to get into the bootup menu.
been searching all over the internet on an alterative machine for a solution to a problem that occurred about an hour ago.To offer background on the machine:I upgraded it last summer with a 60gb Solid State HD to host the OS and a 700gb HD to host the bulk non-system essential files and appsI've had no anti-virus on it but occasionally run the Microsoft free Scan & Repair along with Iobits cleanup suiteThere's been this Win7.CH Trojan Horse that is occasionally detected for the past 6 months and even though I select to fix and repair, it always comes backThe machine will occasionally crash after exiting a high performance application like a videogameAfter installing the Planetside2 videogame Beta on the 700gb drive, my SS drive began to become strangely over-stuffed with files, and I could not narrow down where they originated. I uninstalled a few unessential Iobit programs and cleared my downloads and recycle bin, then something even stranger happened. The SS drive had 16gb free, while this entire time I've had it I've only managed to keep it about 2-4gb free, and the file clogging stopped from what I could tell.Anyway, a week or so later, after exiting the Planetside2 Beta application earlier the machine crashed (unsurprisingly) but upon startup, did not recover.
Startup repair unsurprisingly can't fix it, and I receive the following problem signature:The Windows Repair Problem Signature Problem Event Name: Startup Repair Offline Problem Signature 1: 6.1.7600.16385 Problem Signature 2: 6.1.7600.16385 Problem Signature 3: Unknown Problem Signature 4: 21200506 Problem Signature 5: AutoFailover Problem Signature 6: 17 Problem Signature 7: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033decided to give the posted solution a go since it seemed so similar to mine.Unfortunately I did not realize that the tech tailored the solution specifically to the posters scan results, so when I tried to use the same solution, it didn't work.I'm quickly realizing that my problem is not the same...What I've tried so farI ran Chkdsk and it said F parameters aren't specified and it only took a millisecond to complete showing nothing wrong.The Startup Repair scan returns are all "0x0" errors.The afformentioned forum posts solution didn't work since it wasn't specified to my machine
I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.
My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.
I have had the generic.win virus on my computer for a while now due to my anti virus program not being able to remove it. It has been causing internet browsing issues specifically with google and other search engines. However I believe that the virus has corrupted my "Windows repair tool" that is required to reformat my system. I start my computer and hold F8 to bring up the menu and select the repair computer option and it brings me to the menu where I can either "start windows normally" or run system repair tool.
When I try to run the system repair tool I know it is supposed to bring me to a menu to select language and what not and ultimately restore my computer. Unfortunately it just returns to the normal boot up and repair option over and over upon selecting the option. I just want a virus free computer. My system is a dell inspirion running 64 bit windows 7. I have backed up all the files.
getting a USB mouse or keyboard to work while using a Windows 7 system repair disk. My USB mouse seems to mostly be the problem. The keyboard works most of the time, so why doesn't the USB mouse work
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
I have a HP mini , which comes with windows 7 starter preinstalled .so, i which has 2 disk drives c,d and the HP recovery .in disk management i marked (HP recovery) "mark partition as active " , pressed ok on the warnings .the problem is that my laptop doesn't boot and gets to the HP recovery manager and when i cancel it to boot normally a message says "the installed program cannot start.press OK to turn off the computer".
