Booting with the 32bit dvd does not bring up the Repair service but goes onto Starting Windows screen from the dvd itself. Then PC lockup. Every time.How to stop DVD at booting to bring up System Repair service?
View 1 Replies
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
I have a computer where it keeps booting into the "System Repair" menu. It hasn't done this before.
Recently had lightning struck a transformer. Phones all rang and tv went bizzare! Lucky we had a surge protector.
Well...the computer wasn't doing this before. It use to boot fine but after the transformer problem it starts to boot. Then goes into a screen where it says "Launch System Repair" and "Start windows normally". Even if I select start windows normally it would still go into the system repair menu. I ran PC Check and my hardware all passed. My hard drive passed the SMART self extended test too.
Right now I'm booting off Hirens 15.1 into Mini XP.
everytime i start up computr i get the system repair which keeps going; i manually shut computer off and then on which allows me to then sign in and opens up normally
View 2 Replies View Relatedeverytime i start up computer i get the system repair which keeps going; i manually shut computer off and then on which allows me to then sign in and opens up normally?
View 2 Replies View RelatedI'm trying to restore my Windows 7 64bit machine to its factory settings at the moment, and I've tried the following but they've all failed.1.) Boot up and hit F8, select Repair computer, but then it just boots Windows normally.2.) Create System Repair Disc, and from BIOS boot-up, choose boot from DVD-RW, but when it does that and loads Windows files, Error 0xc000000d and winload.exe missing comes up.3.) When I tried to insert the installation disc that came with my computer, it's not recognized and nothing happens (during boot from DVD-RW).*Note - Just today when I tried to do a system restore, it said that I had no previous restore points, but I just restored a week ago, so that might add some info.
View 3 Replies View Relatedsince I didn't have any kind of network in my house (I only have one computer) it would be okay to disable my Wireless Network Connection -- 802.11n Wireless LAN Card. I did this and now I notice in my Event Viewer under Custom View > Administrative Events there is an error saying: WLAN Autoconfig Service has successfully stopped. I am curious if this service is connected with my now 'disabled' 802.11n Wireless Lan Card? If so, would there be any problem with 'stopping' it in Services since the Wireless Lan Card is already disabled too?
View 3 Replies View RelatedI have upgraded my PC from Windows XP on an intel Q6600 to WIndows 7 on an AMD 1090t processor. I have my new Hard drive (C) with windows 7 and my old hard drive (D) has Windows XP with all of my files.I would like to image the old drive and store it as a "just in case" measure. The old drive has a 500GB capacity with only about 150GB used. When I image the drive the image file is ~500GB.
1. If I resize the old hard drive using "Windows 7 Disk Management" will I still be able to put that drive in my old computer and have it boot up?
2. Will the image file be only the size of the new partition?
Im trying to stop service in task schedual a few minutes after logon. I have a bat file with net stop Superfetch. It opens a cmd window. How do I make this hidden?
View 3 Replies View RelatedI inquired about this on Technet forums, I got a great functioning and undocumented answer. The Office Software Protection Platform service starts every time you start an Office aplication. It usually doesn't exit after you exit an Office app. If you are a process count control freak, you will be elated by this official tweak.
View 1 Replies View RelatedI couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies View RelatedIt started automatically in the middle of the night and nearly 24 hrs later it's still going. I tried to stop it and a window pops up saying it can't be stopped. Every 5 min or so the computer restarts and the Startup Repair continues. I've tried to stop it during the startup with alt F2 but I don't get any choices such as Safe Start, only Start Windows Normally.
View 1 Replies View RelatedAuto sync launcher needs reconfiguration using service pack 1.
View 1 Replies View Relatedmy windows 7 program will not boot up its ask to put in repair disk is there any other way to fix it myself? how much will it cost
View 3 Replies View RelatedI searched the threads for an existing post and I couldn't find one that matched my problem. Sorry if a solution has already been posted somewhere.
I have a new Acer 1410 w/ 4GB of DDR2 memory and a 1.6 CULV processor. It came with Vista Home Premium installed, but I downloaded Windows 7 Ultimate from my technet subscription. Because I don't have an optical drive I had to install from a USB stick. I did this without any problems at all.
Windows 7 has been booting fine and running great for about a week now. I haven't recenly loaded any new software or drivers. Yesterday I shut down my laptop normally; when I tried to reboot an hour later I was shown the "loading files" screen and was then taken to the Windows Startup Repair option. Windows spent an hour trying to repair whatever was wrong with my startup and I was finally given an error message that it couldn't make any repairs.
I tried going to the DOS prompt and fixing the boot manager and boot file; interestingly all this did was suddenly give me the option to boot Windows 7 or Windows Vista (!!!). I still get the Windows Startup Repair when I try booting Windows 7. If I try to boot Vista (I was curious) it takes me all the way to the login screen but then tells me I have files missing if I try to login, which is fine - I wasn't trying to set up a dual boot anyways.
Here's the part that's really got me stumped: If I try booting my laptop into install (using the bootable USB stick I created to setup Windows 7 on my laptop) I have the option to repair my computer. When I choose this option it of course takes me to the advanced repair options where I can choose Windows Startup Repair; it runs the repair and tells me it doesn't find any problems with my computer and to go ahead and start my computer normally. Of course, when I reboot and remove the USB stick my computer doesn't boot normally; I'm taken back to the "loading files" screen and then to Windows Startup Repair where I'm told that Windows can't repair my startup.
My hp windows 7 is show me an error message everytime i try starting it. The MESSAGE IS " DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
View 2 Replies View RelatedI was playing Hitman Absolution all day, ended up falling asleep with my laptop on.it ran out of battery and when I woke up, it was drained of all power, as per usual.However when I tried to start it up, it went into startup repair and then said it couldn't start windows.
View 4 Replies View RelatedMy pc, which is running Windows 7, is continuously booting to repair mode and 9 times out of 10 just boots to a black screen with mouse cursor at which point I have no option but to do an illegal shutdown. I have tried to run a system restore but an error message 'an unspecified error occurred during system restore (0x80070002)' keeps popping up. On the occasion it gets through to the desktop it says that it was successful. Next time I shut down and go to reboot I have the same problems. Also when I go to the internet the homepage has defaulted [URL] which looks similar to google but without the banner.
I dont think this is malware but possibly a critical windows update that has corrupted. If I get to desktop and then shutdown there are 11 updates that are downloading but on reboot the you can see that the updates are loading properly. The only thing I have changed recently is I have updated the printer drivers. For no reason, all of a sudden the other day the printer stopped working and once I updated drivers it was fine. This pc has worked fine for months until the latest set of updates came through. On further reading it looks like searchnu is malware. Could updating a driver really have installed this.
Randomly, my computer is no longer able to boot from my OCZ Agility 3 SSD. By randomly, I mean it was working just fine this morning, but no longer. I can't remember if I changed or updated anything.
Well I then went and inserted the Windows 7 repair disk. A list pops up saying to select my OS, but nothing is listed. I selected load drivers, and I'm able to navigate to the ssd successfully and view all of the files. I even plugged it in to the computer I am using now and was able to back up the more important documents in case I will need to do a reinstall. (I would rather not though).The repair utility doesn't fix the problem, and I navigated this forum and many others trying to find similar problems to mine.
Windows 7 Ultimate 64-bit
AMD Phenom II X4 965
Galaxy GeForce GTX 460
16 GBs Corsair RAM
I do have two other hard drives on the system that I use for general programs and another for raw video storage.They are disconnected now, so I don't see how they would affect the problem.
I had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
View 9 Replies View RelatedI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedI have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies View RelatedWhen i try to repair my system file inserting my win 7 DVD i get a a message as windows resource protection could not start the repair service windows 7 I tried fixing it through msc.services setting "windows Modules Installer" setting it to manual [URL]
View 9 Replies View RelatedPer microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies View RelatedI have just installed a Forex Trading Platform that needs my PC running all the time,otherwise it pauses. If i am away from my PC for more than a minute or two the system hibernates and i have to login in again,How do i stop this from happening
View 1 Replies View RelatedI have a HP mini , which comes with windows 7 starter preinstalled .so, i which has 2 disk drives c,d and the HP recovery .in disk management i marked (HP recovery) "mark partition as active " , pressed ok on the warnings .the problem is that my laptop doesn't boot and gets to the HP recovery manager and when i cancel it to boot normally a message says "the installed program cannot start.press OK to turn off the computer".
View 6 Replies View RelatedI have installed windows 7 beta on my windows XP machine,SATA hard disk. Issue: Unable to boot into win 7. XP boots fine.
C: had XP. Installed windows 7 to F: drive.
After installing I could boot into windows 7 and could work on it.
Later i found that windows 7 would boot (with the windows 7 boot manager) only when the windows 7 installation disc was on dvd drive.Otherwise only XP is shown in the boot selection menu - the standard old menu.
Now, even with the dvd, it does not boot into win 7. Instead it goes to the Windows 7 install screen. But the installed files are still there in F drive. So, tried repair in win 7 for start up, but no problems were found.
Tried easyBCD from within XP, but that didnt help booting to win 7.
One peculiar thing I noticed is, although I installed win 7 to F: drive, when seen from within win 7, the installation drive was shown as C: drive. In reality the C: drive contains the xp installation. From within win Xp, win 7 installation files are in F: drive only. Is this the problem?
Now how do i boot into windows 7? Will adding some lines to boot.ini help in getting the windows 7 to the OS choice list?
Got a Dell laptop with Wn7 premium and I noticed windows update was not up to date. Checked manually and it said Windows security center is not turned on, tried to turn it on and all I got was it won't start.
I checked and I uninstalled a Norton AV that was a come with, I rebooted and I still have same issue. I havent been able to keep Win 7 updated. I am using McAfee for AV, it seems to be working fine.
my config:
Processor: AMD Phenom II x4 945 AM3
Motherboard: Gigabyte GA-790FXTA-UD5 AM3, BIOS F2
RAM: DDR3 Mushkin 996776 4x4 GB (16GB)
graphics: Gigabyte Radeon HD 7950 GV-R795WF3-3GD
[code]....
SSD, Radeon HD 7950 and Mushkin ddr3 are the newest parts. But I'm experiencing random BSODs (ntoskrnl.exe). There were also BSODs related to dwm.exe, but they disapeared when I installed Catalyst 12.8. Sometimes there are hardlocks without BSODs - ctrs+alt+del doesn't work here so I have to do a hard reset.First I thought it might be related to Radeon 7950 and compatibility problems - F2 (2009) is the latest BIOS for my motherboard (there is also F3J but still beta). Now it seems to be ok after I installed Catalyst 12.8.Then I thought that the SSD connected to Marvell controller is the problem. Well, there is a problem cause BIOS sometimes cannot see this SSD. Now Im thinking of buying a newest motherboard... unfortunately. I updated Marvell Controller drivers, still the same.Next thing - I ran memtest86+ ver. 4.20 to check memory. Pass 0 (Modulo 20, Random pattern) - there's only one error:
Test 8, Pass 0, Failing address 00080073468 - 2048.4mb
Good: e17e40c8
Bad: e17e00c8
Err-Bits: 00004000
Count 1
Next pass - no error. I let Memtest complete 6 passes. I got only this one error.BIOS settings:
tCL: 9
tRCD: 9
tRP: 9
tRAS: 24
Ram voltage - 1.635v set memory voltage to 1.650V. First MemTest pass - no errors. Second pass also completed. I think that all four sticks are ok. I can't say it's overheating. I'd say the memory is getting warm (even not so warm), but not hot. Third MemTest pass also was completed. No lock ups. Probably too low voltage could generate errors.Today I got another BSOD:
2012-08-28 19:38:20 SYSTEM_SERVICE_EXCEPTION 0x0000003b 00000000`c0000005 fffff880`0404a609 fffff880`0b98e9b0 00000000`00000000 tdx.sys tdx.sys+3609 x64 ntoskrnl.exe+7f1c0 C:WindowsMinidump�82812-36504-01.dmp 4 15 7601 276 112
