My windows has crashed so I have nothing just a black screen (except I could get internet from task manager and so can write this). I can't even run my symantec or other systems to do a virus check/repair because I can't access them on the computer. What can i do?
View 2 RepliesAbout 6 months ago I had several issues with my screen flickering. I thought it was just an old monitor so I replaces it. No problems, however the last 48 hours my screen goes black then sometimes it will come back on and say that my display driver crashed. I've tried looking around but i see no error reports or anything on the driver. I am using a NVIDIA GeForce 7600 GS. I just uploaded the complete system specs to the website.
View 1 Replies View RelatedUnder my Windows 7 performance information it is listed that I have 2.5 Gigs of usable RAM even though I have 4 installed. I think this is because I have 1.5 GB of graphics memory but I don't fully understand what that is. I also don't understand the difference between the listed "dedicated graphics memory(512MB)" and the "shared system memory" that I guess make up the 1.5 GB I'm "missing".I was thinking of installing a 64 bit version of my OS to take full advantage of my installed memory and I think my system is fully capable. I just need to have the right processor and enough memory to make it worth it correct? I assume my motherboard is capable if it is using a capable processor.
View 14 Replies View RelatedMe and my friend go this virus two days apart, and she'd been able to fix it quick within the day, I'm still having problems.I see fixes for it using MBAM, which I've tried. It's installed, but no mater what, I can't run it even if I name it mbam.com, or anything of the sort.Also, my computer won't go into safe mode. I can run it normally, but when I press F8, I can pick to boot off my SARA, or my CD Drive, but piking either of those just takes me to system restore, where I wipe my hard drive which I"ll only do if it's a last resort.
View 1 Replies View Relatedone day it just shut down and would not startup any more, it goes straight to startup repair and fails and loops this. i have fixed this issue before, with bootrec tools on the 7 CD, but this time it wont do anything, no matter what i try it tells me "total identified windows installations: 0"does anyone know what to do, other than a fresh install, since i have hundreds of gbs of music and movies not recently backed up, and lots of work on the drive i cannot lose.
View 1 Replies View RelatedMy brother has a desktop that will barely even turn on because of a virus. Could you upgrade it to Windows 7 and if you could what would happen? I didn't know whether to put this in the Vista forum or the Windows 7 forum...
View 10 Replies View RelatedI can't run Empire Total War full version.I've tried with compatibility modes and "run as administrator", I reinstalled directx and I installed the last drivers of Nvidia.
View 9 Replies View Relatedi have Intel HD Graphics on my core i3 in dxdiag in display section,there is an approx.total memory 763mb i want to play PES 2011,but in PES 2011,the vram is just 128 mb read on PES can it changed ? and how to change it?
View 2 Replies View RelatedAfter windows 7 updates last wed I had to reinstall windows 7 (64bit) as system restore wouldn't work. I now want to restore my outlook 2010 to its original state. My hard drive was backed up to a cloud storage company and I am now downloading my outlook files. There are around 10 files ending in .pst and another 4 in the form archive1.pst etc.can I merge all the into one outlook.pst file and one archive file?
View 5 Replies View RelatedI've had multiple BSOD over the past week. It seems most common when I try to play Total War, but it has also happened while I'm on the Internet as well. I have Windows 7 Home Premium 64-Bit Installed OEM and my laptop is about 1.5 years old.
View 9 Replies View RelatedIt says 'The wrapper version of SecuROM is too old, it can not be used with this version of the API. Please protect the application with the latest version of SecuROM!' I've updated Kingdoms to the latest update and tried reinstalling and uninstalling but nothing happens. It's only Medieval 2 Total War Kingdoms and not the original Medieval 2 Total War.I've also installed the SecuROM diagnositcs tool but that fails every time I try it so now I've run out of ideas except that I think the data on the disk may be screwed even though theres no scratches on the disk.
View 2 Replies View RelatedNote that this is the beta software and comprises ONLY Anti-virus and firewall protection.
McAfee Total Protection suite is now available supporting Windows 7 Beta version 7000 only. If you would like to test our software using Windows7 please uninstall your current MTP suite prior to upgrading to or installing Windows7 then reinstall our software. The MTP suite for Windows7 includes MSC, VirusScan and Personal Firewall only.
In addition Maintain Computer and Manage Network are also disabled for this initial MTP Beta with Windows7 Beta version 7000.
With the recent update released Feb. 13, you will notice that Maintain Computer and Manage Network features are missing. We are currently verifying our products to support Windows 7 Beta, and have released a condensed version of our MTP suite with this initiative.
Maintain Computer and Manage Network are currently under such verification and will be enabled once complete. If you wish to test running Windows 7 Beta, you will need to uninstall your current McAfee Beta products, install or upgrade to Windows 7 (upgrade from Vista only), and then reinstall our condensed suite of MSC, Virus Scan and Personal Firewall only. Products will be enabled as we continue Windows7 supportability verifications.
One of my friends is giving me a disk to install mc afee totoal prtection 2013 because he says u can install it up on three computers. he says its good because its paid and better than free ones.is it good. if not, what free virus protections are good
View 3 Replies View RelatedI recently had BSODs and freezes.I was under the impression these were related. I found that the BSOD was a driver related to a logitech camera, which i ahve unistalled.I have since completed accidently stumbled upon "summary page events" in event viewer and have noticed all these errors were when ive been having these complete system freezes. [code] I ubilt my own PC. It is not overclocked and it runs very coolIm having 0 bsod's at all!
View 9 Replies View RelatedMcafee total protecion 2011 loads OK but the last loading, security etc, it fails
View 1 Replies View RelatedWhen I marked a whole folder or a couple of files in Windows Explorer in Windows XP then the sum/total size of all marked files is (was) shown in the status bar in the bottom of the WinExp window.
View 3 Replies View RelatedSince a Windows update at 3 AM this morning Windows Explorer keeps freezing and i can't do anything beside a reboot using the power button of my computer. It seems to be random. It mostly happens when i open a file or a folder, right click on something or do anything involving explorer.I tried to do a system restore but didn't fix it. I'm wrting this in safe mode and so far i have no problem.
View 5 Replies View Relatedduring the night yesterday my computer crashed, i can't boot it at all. keeps giving me video signal errors, but when I use a linux live dvd, everything works fine, so it is only windows7 that is the problem... I tried using the W7 installation disc but the recovery and restore functions are not working either.
View 6 Replies View RelatedMy netbook crashed luckly I have an external cd rom drive, and the recovery discs. How do I get the netbook working again though. What are the steps I need to take.
View 1 Replies View RelatedI just got my first computer in place i installed win 7 on it and everything went smooth, but then i realized i had by misstake installed the 32bit version..so i checked the SSD, which is the only kind of storage drive i have right now, and for some reason the installation had made an partition called system drive or something on 100mb. the stupid thing is that it was nothing on it?? windows was still on C:? anyway , after many minutes of thinking i decided to just reinstall windows over the old one and so i did. it runned smooth and went perfect, i checked the preferences of my computer and as planned i now had the 64 bit version but 30Gb was lost on my SSD? i discovered that the old windows was still there, in the windows.old folder... i didnt think about much so i'd just pressed delete...
the crash: loud noise came from the computer and it shut off, now i cant get it to work!!!!!when i start it all the lights starts and the fans runs but nohting moreand how do i format the ssd so i can use it when i've fixed the computer!specs:Motherboard: MK Gigabyte Z68X-UD3H Socket 1155, Z68 CPU:Core i5 2500K Graphic: GK EVGA GeForce GTX 570 SC RAM:Corsair 8GB (KIT) DDR3 1600MHz/VENG. Drive:SSD 120GB Corsair SATA 2.5", Force 3 Series Cooler:Cooler Master Hyper 212 Plus CPU cooler AMD/Intel PSU: XFX XPS-750W BE ATX 12V EPS 12V
windows 7 told me to update the game, but there aren't any updates
View 6 Replies View RelatedI am no expert when it comes to computers so please bear with me. My Acer Aspire laptop crashed on me. It uses Windows 7. Start up repair does not work. I have a set of Windows 7 disks, 32 bit and 64 bit. Not too sure which one I should have used so I tried both with the same results. I have tried to re-install Windows 7 again as well as repairing the Windows 7 which is already on my computer with the disks with no luck. When re-installing it gets stuck at 'Setup is starting'. It stays like that for hours. When I try the repair option it gets stuck at 'checking for operating system' or something to that effect, also for hours on end
View 9 Replies View RelatedI tried installing ubuntu on my HP pavilion dm4 today by dual booting it and keeping both windows 7 and ubuntu on the different partitions. I installed ubuntu 10.10 successfully but the thing was when I am restarting the laptop. Its asking me to choose the operating system but when i choose windows 7 it says to repair the system and to repair I should have a Windows 7 DVD. I got the system 10 days back and i had no back up of the system and I think my HP recovery was also crashed. I dont know what to do. How to bring my Windows back? The good thing was ubuntu was working good and I am using it now...
View 9 Replies View RelatedMy laptop used to run on Windows 7 Home Premium 32bit, but the OS crashed and just wouldn't boot. I tried using my laptop's recovery disc, but that had some problem and doesn't help me restore my laptop. I hope to format my hard-drive and do a fresh install of Windows 7. But for that I don't have an installation disc, I have a registered key for Windows 7 at the bottom of my laptop though
View 7 Replies View RelatedMy mate had trouble with wayyyy too low fps in a game.W decided to install Windows 7 ultimate x64 on his laptop then.We couldn't upgrade vista to it, so we chose the "custom install" option, where Windows 7 gets installed separately and vista gets moved into a folder called windows.old.We were almost done with the install and had just passed the time and network setup, suddenly a small window flashes with the text "windows failed to complete...." we couldnt see the rest and the laptop rebooted.Then we got continually stuck on "press any key to boot from CD or DVD...".Sometimes we get it to continue and it gets stuck on "Windows is loading files". And 2 times it completed loading files and shut down instantly after.
View 6 Replies View RelatedI started watching an OTA recording with WMC7 and about 2 minutes into it WMC7 stopped. A message came up saying it stopped & had options to restart WMC or go online (which appeared to send info to MS) and a 3rd option I don't recall. I just restarted & everything worked just fine.
I looked at event logs & found this. I did a search for that ntdll.dll but could not find a definitive answer to what caused the problem. The typical comments were to reboot or reinstall software. Is there anything from this listing that tells or hints at what caused WMC to stop?
Log Name: Application
Source: Application Error
Date: 11/7/2012 5:09:23 PM
[Code].....
I have a 1TB HDD (internal) And its divided into 3 partitions and while shrinking 1 partition from the partition manager of windows itself .. It got hanged up.. I waited 30 minutes but it didn't responded than i closed it forcibly and When i restarted the system That partition got vanished from my computer and was converted into raw part... It got my engineering projects and my freelance projects i used to do for $$ .. Almost 250$ is at ledge.. And my school projects aswell.. But those things matter to me.. recover all DADA Possible.. I'm ready to shell out some $$ aswell on premium softs aswell But i want that to be back...
My specs are
intel Core i7-3610QM 2.3GHZ
6 gb ddr3 ram at 1333mhz and nvidia 550Ti
This is the exact laptop I have, Asus X54C 15.6 inch laptop (Intel Pentium B960 2.2GHz, 8Gb RAM, 500Gb HDD, DVDSMDL, LAN, WLAN, Webcam, Windows 7 Home Premium 64-bit): Amazon.co.uk: Computers & Accessories
This morning when turning it off, it started to update with the usual screen saying not to turn it off or unplug. I went out to do some stuff, and when I came back my laptop was turned off so I assumed the installation had finished. However when I pressed the power on button the laptop turned on, it was still how I had left it installing updates. However it seemed to be making no progress whatsoever. It was still on 1 of 60 updates. I left it for a while, but I needed to take it home and seen as it wasn't doing anything I held the power on/off button to power down the laptop to take it home. When home the laptop would refuse to boot to windows, and the screen would just go black. I tried to start the laptop in safemode, but again it wouldn't load. I performed startup repair but it said the problem couldn't be fixed. I then performed a system restore, however it also said that could not be performed. However after clicking okay, windows loaded up and prompted me to log in. Upon which I am on the computer now with no problems, a contradictory message came up saying that the system restore had been succesful. I'm now worried that there still could be some problem that might arise when I close down my computer and need to start it up the next time, in addition it is wanting me to install updates and prompting me to restart my computer. Does anyone have any advice on how I can ensure that the computer does not have the same problems again when updating, and in addition how can I make sure that there are no problems waiting in the computer to surface again and it is fixed?
I am writing this windows safe mode.Cannot get computer to boot in reg mode. Sat for 40 minutes, with message "please wait while windows configures"Am running windows 7, 64 bit home, Dell Inspiron 570 It started yesterday when it downloaded updates for Windows. After the restart, the computer screen looked strange and could not open any programs. Went to "start" and re-booted, same thing happened again. I again went to start, this time it came up with 2 errors. (wish I had wrote them down) but said something about windows cannot find such and such. (sorry) Anyway, clicked on the "X" and windows came up again, but nothing would open. Had to hard boot as the start button would not even work.Rebooted into safe mode and have tried to return to a previous restore point. Seems I don't have any. So can't do that. I did go go to the recent installed windows updates and deleted them. But will not let me change the settings as in: Don't install updates automatically. I don't know if it is trying to install those over and over again. I tried to get it to come up again with the errors, but no such luck, it just sits with the blue welcome screen, then the "please wait"
View 9 Replies View RelatedAny prevailing issues with the latest round of windows updates? Two weeks ago our computer running Windows 7 Premium downloaded an update and received the dreaded black screen on startup. It will now no longer run windows, offer a boot menu or anything. Today our older unit running Vista Home Premium did an auto update and we now have the same issue. Sadly with the O/S and with Microsoft "stellar" customer service. I am running Norton with all the current updates and i am sure it is not a virus.
View 2 Replies View RelatedI install the Nvidia Quadro NVS 140M in windows7 x64, but my system crash when I load 3d images, before I install it , 3d images can be loaded easily but OpenGL can not be used. I download the driver from dell site, it is for Windows vista x64 but it install on Windows7 without any error.
View 1 Replies View Related