I install the Nvidia Quadro NVS 140M in windows7 x64, but my system crash when I load 3d images, before I install it , 3d images can be loaded easily but OpenGL can not be used. I download the driver from dell site, it is for Windows vista x64 but it install on Windows7 without any error.
View 1 RepliesThought I'd make a post of this since I had trouble getting my graphics driver working with build 7264 x64 and the latest 7600 x64 release..
The driver I used earlier was presented on windows update as a
(WDDM Pre-release) (does not show up with build 7264 x64 and latest 7600 x64)
Download this driver -> http://www.laptopvideo2go.com/nvidia/185series/18624_win7x64.exe
When you extract it you will find a zip archive called: additional_infs.zip
Inside this archive extract the file called: nvlt.inf
Put it with the rest of the files you extracted from the .exe file.
The driver is not digitally signed, but you will at least get your video card working
I have an nVidia Quadro in my desktop here at work, just installed Windows 7 Pro 32Bit (trying all the flavors before rolling out to prospective clients).
I can get multiple displays running but I've encountered a problem that has driven me to the breaking point.
From my onboard VGA, I can get full resolution and a great picture. From my Quadro all I get in dual dispaly (not the full 3 or 4 I want) and when it does display on two screens together, it's mirrored.
The display options are only seeing the monitors and Generic PnP and it detects the two both as monitor "1". Their resolution is stuck to 1024x768.
Here's the stranger part: In my Hardware Profiles, it has 2 Standard VGAs listed in Device Manager and 2 "Intel(R) 82915G/GV/910GL Express Chipset Family". One of the "Intel" chip and one of the "Standard VGA" each are showing that the devices could not start.
I've uninstalled the drivers for all 4, rebooted, removed them from device manager and even switched my BIOS to boot from the onboard instead of Auto (Dell BIOS).
To finally confound things more, when I do reboot, guess what displays on the BIOS? QUADRO!
My BIOS obviously recognizes and identifies the card, but 7 is just throwing it down. I've tried the new Forceware drivers as well as every driver nVidia had listed for Windows 7 32bit for every model of NVS Quadro with no avail, it just says that no matching hardware is found.
Can this be addressed and fixed or should I just start getting rid to roll over clients video cards like crazy?
I recently installed an Nvidia Quadro CX card under Windows 7 (risky, I know). Although I'm using the latest drivers from Nvidia, I can't get the second monitor to display through the displayport-to-DVI adapter.
I can swap cables all day long and each monitor works fine with the DVI connector; it's just that nothing is detected when plugged into the second output (displayport).
Has anyone else run into this problem with Windows 7 build 7000?
After fitting a Nvidia NVS 295 card into my new Advent computer (Foxconn mobo, i5, 8GB RAM) my DELL ULTRASHARP U2711 will not display at its maximum 2560 x1400 res. I can only get 1920. In fact 1920 is the highest selectable in the Nvidia control panel. I let the Nvidia installer set up everything without removing the onboard AVG driver first - I assume it did this automatically? I am using the DVI cable that came with the Dell. What am I doing wrong? I have used the latest Windows7 64bit driver download from Nvidia website.
View 9 Replies View RelatedDELL E6400 w/ NVIDIA Quadro NVS 160M -- Horrible FPS?
View 4 Replies View RelatedSo about 2 hours ago on my PC. I was playing WoW and had a hard crash and lock up. So I restarted my PC. Everything seemed fine. Just a mysterious crash. So I went on to updating my graphics drivers since it had been on my mind to do so. About half way into the update my desktop then crashed again. Only this time it cannot even get windows 7 64 bit to start up.Then I ran the Start up Repair program. I get a message that it cannot repair it automatically.On a history note. This PC has been pretty good to me. A few months back I had a bad run in where my RAM wasnt being read correctly and a simple re-docking fixed that. That was solved on this web forum as well. I don't know if its connected. Just a reference on history.Other then that I'm not exactly sure how to go about on fixing this. I've never had a problem where even Windows wont boot up. *Safe Mode does start up* Just not sure what to do.BSOD data is attached. I tried running perfmon / report in safe mode but I got an error.
View 9 Replies View Relatedancient cards but they will do for the machine I want to put them in. I just want to know which one would be better? Both cards have 128 MB of DDR VRAM, and PCI-Express. The Radeon card has no fan, just a heatsink, while the Quadro has a fan. Currently this system is running Windows XP, but I might put Windows 7 x86 on it.The PC is a Dell Optiplex GX280:
3 GB of DDR2 RAM
3.2 GHz Intel Pentium 4 HT
80 GB SATA HDD
The main thing this system is being used for is Adobe CS4.
I got motherboard: Asus m2n-mx se plus. Video Card : nVIDIA nForce 6150SE (6100-430), Onboard Audio : nVIDIA MCP61 , D-Link DFE-520TX PCI Fast Ethernet Adapter .
My Motherboard comes with Vista drivers, but I heard that even that are creating problems for video and audio. Should I download any specific drivers beforehand?
Since a Windows update at 3 AM this morning Windows Explorer keeps freezing and i can't do anything beside a reboot using the power button of my computer. It seems to be random. It mostly happens when i open a file or a folder, right click on something or do anything involving explorer.I tried to do a system restore but didn't fix it. I'm wrting this in safe mode and so far i have no problem.
View 5 Replies View Relatedduring the night yesterday my computer crashed, i can't boot it at all. keeps giving me video signal errors, but when I use a linux live dvd, everything works fine, so it is only windows7 that is the problem... I tried using the W7 installation disc but the recovery and restore functions are not working either.
View 6 Replies View RelatedMy netbook crashed luckly I have an external cd rom drive, and the recovery discs. How do I get the netbook working again though. What are the steps I need to take.
View 1 Replies View RelatedI just got my first computer in place i installed win 7 on it and everything went smooth, but then i realized i had by misstake installed the 32bit version..so i checked the SSD, which is the only kind of storage drive i have right now, and for some reason the installation had made an partition called system drive or something on 100mb. the stupid thing is that it was nothing on it?? windows was still on C:? anyway , after many minutes of thinking i decided to just reinstall windows over the old one and so i did. it runned smooth and went perfect, i checked the preferences of my computer and as planned i now had the 64 bit version but 30Gb was lost on my SSD? i discovered that the old windows was still there, in the windows.old folder... i didnt think about much so i'd just pressed delete...
the crash: loud noise came from the computer and it shut off, now i cant get it to work!!!!!when i start it all the lights starts and the fans runs but nohting moreand how do i format the ssd so i can use it when i've fixed the computer!specs:Motherboard: MK Gigabyte Z68X-UD3H Socket 1155, Z68 CPU:Core i5 2500K Graphic: GK EVGA GeForce GTX 570 SC RAM:Corsair 8GB (KIT) DDR3 1600MHz/VENG. Drive:SSD 120GB Corsair SATA 2.5", Force 3 Series Cooler:Cooler Master Hyper 212 Plus CPU cooler AMD/Intel PSU: XFX XPS-750W BE ATX 12V EPS 12V
windows 7 told me to update the game, but there aren't any updates
View 6 Replies View RelatedI am no expert when it comes to computers so please bear with me. My Acer Aspire laptop crashed on me. It uses Windows 7. Start up repair does not work. I have a set of Windows 7 disks, 32 bit and 64 bit. Not too sure which one I should have used so I tried both with the same results. I have tried to re-install Windows 7 again as well as repairing the Windows 7 which is already on my computer with the disks with no luck. When re-installing it gets stuck at 'Setup is starting'. It stays like that for hours. When I try the repair option it gets stuck at 'checking for operating system' or something to that effect, also for hours on end
View 9 Replies View RelatedI tried installing ubuntu on my HP pavilion dm4 today by dual booting it and keeping both windows 7 and ubuntu on the different partitions. I installed ubuntu 10.10 successfully but the thing was when I am restarting the laptop. Its asking me to choose the operating system but when i choose windows 7 it says to repair the system and to repair I should have a Windows 7 DVD. I got the system 10 days back and i had no back up of the system and I think my HP recovery was also crashed. I dont know what to do. How to bring my Windows back? The good thing was ubuntu was working good and I am using it now...
View 9 Replies View RelatedMy laptop used to run on Windows 7 Home Premium 32bit, but the OS crashed and just wouldn't boot. I tried using my laptop's recovery disc, but that had some problem and doesn't help me restore my laptop. I hope to format my hard-drive and do a fresh install of Windows 7. But for that I don't have an installation disc, I have a registered key for Windows 7 at the bottom of my laptop though
View 7 Replies View RelatedMy mate had trouble with wayyyy too low fps in a game.W decided to install Windows 7 ultimate x64 on his laptop then.We couldn't upgrade vista to it, so we chose the "custom install" option, where Windows 7 gets installed separately and vista gets moved into a folder called windows.old.We were almost done with the install and had just passed the time and network setup, suddenly a small window flashes with the text "windows failed to complete...." we couldnt see the rest and the laptop rebooted.Then we got continually stuck on "press any key to boot from CD or DVD...".Sometimes we get it to continue and it gets stuck on "Windows is loading files". And 2 times it completed loading files and shut down instantly after.
View 6 Replies View RelatedI started watching an OTA recording with WMC7 and about 2 minutes into it WMC7 stopped. A message came up saying it stopped & had options to restart WMC or go online (which appeared to send info to MS) and a 3rd option I don't recall. I just restarted & everything worked just fine.
I looked at event logs & found this. I did a search for that ntdll.dll but could not find a definitive answer to what caused the problem. The typical comments were to reboot or reinstall software. Is there anything from this listing that tells or hints at what caused WMC to stop?
Log Name: Application
Source: Application Error
Date: 11/7/2012 5:09:23 PM
[Code].....
I have a 1TB HDD (internal) And its divided into 3 partitions and while shrinking 1 partition from the partition manager of windows itself .. It got hanged up.. I waited 30 minutes but it didn't responded than i closed it forcibly and When i restarted the system That partition got vanished from my computer and was converted into raw part... It got my engineering projects and my freelance projects i used to do for $$ .. Almost 250$ is at ledge.. And my school projects aswell.. But those things matter to me.. recover all DADA Possible.. I'm ready to shell out some $$ aswell on premium softs aswell But i want that to be back...
My specs are
intel Core i7-3610QM 2.3GHZ
6 gb ddr3 ram at 1333mhz and nvidia 550Ti
This is the exact laptop I have, Asus X54C 15.6 inch laptop (Intel Pentium B960 2.2GHz, 8Gb RAM, 500Gb HDD, DVDSMDL, LAN, WLAN, Webcam, Windows 7 Home Premium 64-bit): Amazon.co.uk: Computers & Accessories
This morning when turning it off, it started to update with the usual screen saying not to turn it off or unplug. I went out to do some stuff, and when I came back my laptop was turned off so I assumed the installation had finished. However when I pressed the power on button the laptop turned on, it was still how I had left it installing updates. However it seemed to be making no progress whatsoever. It was still on 1 of 60 updates. I left it for a while, but I needed to take it home and seen as it wasn't doing anything I held the power on/off button to power down the laptop to take it home. When home the laptop would refuse to boot to windows, and the screen would just go black. I tried to start the laptop in safemode, but again it wouldn't load. I performed startup repair but it said the problem couldn't be fixed. I then performed a system restore, however it also said that could not be performed. However after clicking okay, windows loaded up and prompted me to log in. Upon which I am on the computer now with no problems, a contradictory message came up saying that the system restore had been succesful. I'm now worried that there still could be some problem that might arise when I close down my computer and need to start it up the next time, in addition it is wanting me to install updates and prompting me to restart my computer. Does anyone have any advice on how I can ensure that the computer does not have the same problems again when updating, and in addition how can I make sure that there are no problems waiting in the computer to surface again and it is fixed?
I am writing this windows safe mode.Cannot get computer to boot in reg mode. Sat for 40 minutes, with message "please wait while windows configures"Am running windows 7, 64 bit home, Dell Inspiron 570 It started yesterday when it downloaded updates for Windows. After the restart, the computer screen looked strange and could not open any programs. Went to "start" and re-booted, same thing happened again. I again went to start, this time it came up with 2 errors. (wish I had wrote them down) but said something about windows cannot find such and such. (sorry) Anyway, clicked on the "X" and windows came up again, but nothing would open. Had to hard boot as the start button would not even work.Rebooted into safe mode and have tried to return to a previous restore point. Seems I don't have any. So can't do that. I did go go to the recent installed windows updates and deleted them. But will not let me change the settings as in: Don't install updates automatically. I don't know if it is trying to install those over and over again. I tried to get it to come up again with the errors, but no such luck, it just sits with the blue welcome screen, then the "please wait"
View 9 Replies View RelatedAny prevailing issues with the latest round of windows updates? Two weeks ago our computer running Windows 7 Premium downloaded an update and received the dreaded black screen on startup. It will now no longer run windows, offer a boot menu or anything. Today our older unit running Vista Home Premium did an auto update and we now have the same issue. Sadly with the O/S and with Microsoft "stellar" customer service. I am running Norton with all the current updates and i am sure it is not a virus.
View 2 Replies View RelatedThe hard drive on my Toshiba Satellite crashed. I made the backup discs when the computer was new, but evidently made them through the Toshiba backup rather than Windows backup. Now my recovery discs want to access the hard drive partition to reinstall Windows 7 which it cannot do.
How can I install the Windows 7 OS onto my new hard drive? I have the product code on the back of my computer, but how can I get Windows 7 to install without having to purchase it again?
i Have a PC with i7 Processor running Windows 7 Ultimate and one fine day a blue Screen dropped saying a lot of things like Windows has Crashed, Dumping Physical memory, And It isn't working since then , It says Start up repair Can't fix this Computer,Details:[CODE]
View 1 Replies View RelatedMy system crashed on bootup. I was booting off my RAID. All 3 disks say error. When I try to install Windows 7 and repair it won't let me load the nvidia drivers. The nvidia drivers are .exe installations. Does any know where I can download the normal nvidia drivers to install?
View 1 Replies View Relatedlaptop with win7 is get crashed and I have very important data in it . Is there any way to recover the data its very urgent.
View 8 Replies View RelatedWhen I installed Windows Live Essentials 2011 on my new Compaq Presario CQ5621F with Windows 7, it seemed to load fine. I tried to access the internet and got no connection. When I rebooted my computer it suggested that I restore to an earlier time. Upon doing so it works fine again.
View 3 Replies View RelatedI have beenrunning windows 7 on my computer , and everything has been going great for about a year! I installed uniblue registry cleaner , and it ran the scan, asked me to clear the problems out after it corrected them, then asked me to reboot! when I did, I got the screen asking if I wanted to reboot normally, in safe mode ect ect......it shows the starting windows screen, the logo appears, and then when it gets to the next screen it freezes, the num lock light is on, and I can move the mouse around, but that is it!
View 10 Replies View RelatedI have installed win7 in C drive. But all my essential softwares are installed in D drive. Now my windows is crashed so need to format it. Is there any software or any tips by which i dont need to re install my softwares which are installed in drive D after formating windows 7. Actually the files of those softwares will not be formated. only the registry files will be deleted. so is there any process by which i can run those softwares after reinstalling the windows 7.?
View 3 Replies View RelatedMy windows has crashed so I have nothing just a black screen (except I could get internet from task manager and so can write this). I can't even run my symantec or other systems to do a virus check/repair because I can't access them on the computer. What can i do?
View 2 Replies View Related