WinPE Emergency Disk Won't Load, PC Reboots
Nov 20, 2011
I made a WinPE Emergency disk for recovery, I also made a partition backup of my system which I put on a USA 1TB external drive.Nothing is wrong with my system but I just wanted to check to see if I could access the backup image. But when I boot from the CD I get past the 'Windows is loading files' page, then to a different page with the EaseUS lgo, but the load ba only goes 1/8th of the way before my computer reboots itself.The same thing happens if I use the EaseUS Linux version of the CD.Could it be an error made during the burn process?
View 5 Replies
ADVERTISEMENT
Dec 2, 2009
On the Neo Smart website, there is a link to create a emergency boot/repair disc. It's a torrent download (165MB for Win 7 64 bit), they also have the 32 bit as well as Vista 32 & 64 bit discs. It was the first time I have ever done a torrent file, so I done it on my XP laptop. And it is legal, it was said that Microsoft provided these discs. And if you have any questions about it, there is a forum as well. The website is: http://neosmart.net/blog/2009/window...-repair-disks/
The best that I could do was manually type it in, I don't know how to copy & paste or whatever it's called. I had to figure out how to do the torrent thing myself, I'm sure there are many of you who are more experienced. I did create a disc as soon as I got this PC going, but it's better to have another just in case. And I felt it would be good to share this with you all, because I've received a lot of pointers here, and if anyone gets in a jam, I hope that it's useful.
View 1 Replies
View Related
Jan 24, 2012
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601)
Motherboard: Gigabyte GA-MA78LMT-S2
CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010
SSD:Microcenter SSD G2 series 64GB ATA Device
HDD:Hitachi HDS721010CLA332 ATA Device (1TB)
RAM:8GB
View 4 Replies
View Related
Jan 24, 2012
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601)
Motherboard: Gigabyte GA-MA78LMT-S2
CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010
SSD:Microcenter SSD G2 series 64GB ATA Device
HDD:Hitachi HDS721010CLA332 ATA Device (1TB)
RAM:8GB
View 2 Replies
View Related
Jul 5, 2010
I need to create a winPE boot CD for use with my backup software (Paragon Backup & Restore 10.2 free). The one created by Paragon free is a Linux boot CD that does not work correctly for me. They do have a WinPE CD but it comes with the $69 paid version. I checked on the web and it seems pretty complicated to create my own WinPE requiring me to first install a 900 MB free program (WAIK) to create it with. Is there no simple way to create a WinPE CD right from my installed Windows 7 home premium 64 bit system (or XP system) or by simply downloading a WinPE CD iso? Finally, how is a WinPE boot CD different from the boot CD the Windows 7 system creates?
View 3 Replies
View Related
Feb 20, 2011
I'm using the WIAK CD to create a winpe boot media and it works fine, there are a few commands that you have to remember so I created a winpe.cmd file to make life easier. Here is the content of my winpe.cmd file:
copype x86 c:winpe
copy c:winpewinpe.wim c:winpeisosourcesoot.wim
copy "c:program fileswindows aik oolsx86imagex.exe" c:winpeiso
oscdimg -n -bc:winpeetfsboot.com c:winpeiso c:winpewinpe.iso
when I run (from the WAIK command line in admin mode) the first line copype x86 c:winpe is the only line that executes,why the rest of the commands don't run?
View 3 Replies
View Related
Oct 30, 2009
Does anyone know the method how to create windonw7 WinPE bootable CD? I once create XP with PEbuilder, but it cannot create Windows 7 WinPE CD, I heard that it requires AIK?
View 4 Replies
View Related
May 6, 2012
need the load down disk for the adapter jp1082.no.030818
View 1 Replies
View Related
May 25, 2012
I deleted my windows partition today because I got a virus in windows. Now I cant load any operating system. I have tried to reinstall windows 7 and xp from cd and usb stick I reset my bios to fail safe mode and still cant load any thing. I have the Gigabyte GA-Z68X-UD5-B3 mo board and sandy bridge processor. I have the bios set to load from 1usb fdd 2 cd.
View 8 Replies
View Related
Dec 29, 2009
We just acquired a new laptop with Win7 HP preloaded. One of the first things I did was try to make a System Repair CD (Start/All Programs/Maintenance/Create a System Repair Disc). The CD burning process seemed to go normally. When I tried to run the disc, it seemed to load normally until it got to a screen with the "streaks in the sky" wallpaper and then it stopped. There were no menus, messages, or anything except the wallpaper. I made two discs using a name brand with the same result. I know disc quality used to be an issue but I didn't think this was so these days among the name brands.
View 8 Replies
View Related
Jul 12, 2012
so im about to do a system restore on my desktop computer Windows 7, x64 and before im going to restore it i want to make a recovery disk for it, so i go and find the program in the start menu but when i try to open the recovery program it doesnt open
View 2 Replies
View Related
Nov 27, 2009
Went into the Windows 7 control panel to make a 'system repair disk' (boot disk), just in case I ever needed it. Making the disk went OK, with Windows 7 telling me it had successfully finished, and to label the CD.
I then put the boot CD into my DVD drive to make sure it worked OK. Computer boots from the CD and Windows 7 says it has started loading files. Then the pretty blue background screen started (just like the one in the F8 repair console), and then there was a long pause and then I get the error code shown on the photo below. Clicking OK reboots the computer, and no repair options ever load.
I made two separate boot disks to rule out a bad CD, but still get the same error #
This is a brand new Dell computer, both DVD drives work fine, and burn CDs without problems.
View 4 Replies
View Related
May 4, 2012
i bought a wiped comp on ebay, it's a dell latitude d800. it originally had xp on it, i'm trying to boot win 7 ultimate. problem is it has not been partitioned at all, when i turn it on it says "no boot sector on hard disk", then "no bootable devices--strike f1 to retry boot, f2 for setup utility" i tried going straight to the boot menu on startup and loading from the dvd drive, but it is saying the same message as before.
View 7 Replies
View Related
Aug 15, 2011
I have a disk for Phillips Voip which will not load on Win 7 it says XP or later?
View 2 Replies
View Related
Jun 19, 2012
I edited a 2 minute piece on AVID Express Pro. Downloaded the piece to a Sn Disc and took it to another PV that runs Windows &...I've tried to upload the video to You Tube and get the "no disc" error. The computer that I used to create the video is operated by Windows XP.
View 3 Replies
View Related
Jan 19, 2013
I get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
View 1 Replies
View Related
Jan 2, 2013
Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
View 2 Replies
View Related
May 5, 2012
Just got a brand new Samsung Series 7 laptop and everything was working fine until i started installing windows updates. The cpu is now stuck at around 15% load and there's constant disk activity too. I run msconfig.exe and disabled programs that I don't really use much, run disk defrag just too make sure the disk was working well. As a result my cpu is running hot (65 degrees) and the battery drains pretty quick.
View 1 Replies
View Related
Aug 3, 2012
how do i load a 32 bit program my epson perfection 1650 scanner disk into 64 bit operating system
View 1 Replies
View Related
Jul 10, 2011
I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies
View Related
Jun 25, 2012
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies
View Related
Apr 7, 2012
Im having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
View 1 Replies
View Related
Aug 28, 2011
when i shut down my computer ,it keeps starting up and the only way to shut it down is to hold down power button for 10 secs.
View 2 Replies
View Related
Nov 27, 2011
It does it once a day,yesterday it was about 3:30 pm today it was 11:30 am its done it at 9 pm and I have windows update service disabled on the msconfig startup.
View 9 Replies
View Related
Jan 23, 2012
[code]...
The computer reboots itself. I've checked processor for heat sink problems, thinking this is an hardware issue.I've attached required files
View 9 Replies
View Related
Nov 18, 2011
I have a little problem with my laptop here, I am using Windows 7 enterprise 64-bit and everytime I reboot, nothing saves at all. This is quite annoying since I downloaded a 14GB game and it just vanished after reboot, now I got to download it again. I know there is a way to disable this thing, but I can't figure it out
View 4 Replies
View Related
Sep 1, 2009
i have had windows 7 64bit version installed for a couple months on my pc, and these 2 days it's kept rebooting. it goes off (no shut down message, it all happens all of a sudden), and after a second or 2 the machine boots up again. before loading the os the pc prompts me to choose if i want to start windows normally. i press enter and windows starts up with no problems at all. when a system error occurs, after rebooting it usually notifies me that the system was recovered from an error. but it displays no message.
now, my question is this. i heard that before the coming out of the windows seven final version, microsoft would have you install an update that reboots your machine every 2 hrs to "suggest" people buying the os... how kind of them, really... whatever, is this possibly the case? if this is, i guess i gonna downgrade to windows vista till i can buy windows 7.
View 9 Replies
View Related
Jul 27, 2011
I have just bought a new PC with Windows 7. Ive only had it four days and today my computer store replaced my MB cos my computer has taken to shutting down and then restarting all on its own. the problem is Ive just got it home and its doing the same thing.
View 1 Replies
View Related
May 26, 2011
I have a desktop computer AMD 3.0 ghz dual core processor, 4gb ram, win7 ultimate(legit), 1 TB HDD(new) and an asus m2n-mx se plus motherboard. every time I turn my machine on, it goes through the POST and finishes boot up sequences and then start to load windows. Some times it finishes and I get to my desktop while other times It reboots only seconds into the win7 loading procedures. this has happened for quite a while and I am beside myself for an answer. I have even flashed the ROM to update that. I have unhooked all drives except for one. I have even unhooked the DVD drive to eliminate that. still the problem is here. the only thing that I havent replaced yet is the motherboard, which I may do and get another video card and run dual video cards but I need this gremlin gone.
View 7 Replies
View Related
Aug 27, 2012
while I'm surfing the web or playing games and whatnot... My computer just reboots all of a sudden. And not just once, but once it reboots, it reboots again several times before I manage to log in or sometimes after I log in but not even get to the Desktop, or it halts completely when the windows Symbol appears (The one with the four dots which turn into a flag or something) so I have to turn it off by keeping the power button pressed. Also, the reboots are usually accompanied by a screeching sound.
View 14 Replies
View Related
Jan 17, 2013
I have a GIGABYTE GA-990FXA-UD3 mother board with a phenom II x4 965 3.4 with 2 4GB PNY sticks of DDR3 ram, all of which I just got from someone. Also a NVIDIA GeForce 440 connected to it at the moment for the graphics card and a 500 watt power supply. Two hard drives are connected to it, 1TB and a 80GB I use just to run windows off of. I have windows 7 Ultimate edition installed. The power supply graphics card and hard drives come from a computer that worked perfectly, and so did the cables FYI so I doubt any of those are the issues.Upon installing windows it froze, and rebooted, multiple times until during the instillation phase and first time set up boot. When I finally got it to install I constantly got the same problem where the computer would restart or freeze when I was doing something. Some times it would freeze/reboot when I opened a program, other times when I closed a program, sometimes when I just moved the mouse. It also restarts or freezes at boot sometimes when it gets to the window logo or Gigabyte splash screen. I have tried;
Switching the power supply
Memtest
Installing windows on another hard drive (It froze during install also)
disconnecting everything and plugging it back in multiple times...
Toying with the bios settings
[code]....
View 9 Replies
View Related
