Why Pc Requires F1 To Launch Windows
Feb 24, 2011I understand that I have to fix the problem above in the bios
View 3 RepliesI understand that I have to fix the problem above in the bios
View 3 RepliesI have searched around here for my problem and can't find a solution to my problem.I have two SATA HDD's plugged into my computer, one of them has the operating system on it and the other one has my old XP installation and loads of others, although might have been formatted.When I tried removing the old XP one the computer does not boot up after bios, with the error along the lines of,"Can not find the boot device, please insert.
View 1 Replies View Relatedtrying to load cardscan 8 on 64 bit win 7 computer program requires Microsoft .NET Framework 1.1 which is not supported by win 7 64 bit, is there an alternative to Microsoft .NET Framework 1.1 ?
View 1 Replies View RelatedFor about a month now, I have had this Widows 7 logon annoyance: Sometimes this annoying glitch occurs which won't allow me to login to my account even though I have entered the password correctly; I have to click the Switch User button and then the 'logged in' account. My laptop is set to stay on when I close the lid; I normally ctrl-alt-del and close the lid.
View 4 Replies View RelatedWhere to download the proper drivers for Xtatix Peeper xca-pp2? Windows 7 is not allowing this program to opeate because it requires a digitally signed driver. I have visited the manufacturer's website, but it still does not work.
View 1 Replies View Relatedwhere to download the proper drivers for Xtatix Peeper xca-pp2? Windows 7 is not allowing this program to operate because it requires a digitally signed driver. I have visited the manufacturer's website, but it still does not work.
View 1 Replies View RelatedI have a computer running a 32 bit oem version of windows 7 home. I really need to change this to a 64 bit version. I do not want to do this illegally. Can I buy this upgrade copy of 7 professional, perform a clean install of windows prof. 64 bit with the upgrade disc, and then use my current oem 32 bit home disc and or license key, to validate that i do in fact have a copy of windows currently.
So technically I wont be "Upgrading" from 32 to 64, I will be re-installing. I have asked several tech savy friends, and while they don't think it cant work, they are unsure. Essentially I am asking if anyone knows what validation windows requires for its upgrade discs. I am given to understand it requires you to put in your original windows disc at some point, and i assume your original key, but will it accept a 32 bit disc/key?
I have a word doc on my USB that I don't wish to loose and now I'm getting a message to format! I've tried many approaches over the past week but with little success. The size of the file "c:UsersuserDocumentsSAVED FILES$ROOT00105Finding Form 1Part 3.docx" exceeds the 64KB limit for FAT 32Another company states that the Status of the file is 'Excellent', the size is '95 KB', the Date Created was '25/09/2012' and the Date Modified was '04/10/2012', Time '18:10'. That is the correct file although I'm not sure if 95KB is all the data?? It was roughly 20 pages of text
View 6 Replies View Relatedim trying to run a program that requires .net 3.5, so what i did is i turned on or put a check on microsoft .net 3.5 framework in programs and features. the progress bar immidiately fills up but in the end i get error saying "unable to turn on all features"
any solutions guys?
Quote: Seagate has confirmed plans to release a 3TB hard disk drive later this year. However, the 3TB drive will only be recognized by 64-bit operating systems, such as Windows 7, Vista and Linux. "Not only that, but you may not even be able to see 2.1TB of a 3TB drive when using Windows XP," wrote Thinq's Ben Hardwidge Read More: Seagate says 3TB drive requires 64-bit OS | TG Daily
View 9 Replies View RelatedI had a similar issue where my user name all of a sudden requires a password...i have an ultrabook so i don't have a disc drive. I attempted to resolve the issue by resetting the user password through DOS however it says that the password is blank and it cant be reset?
View 1 Replies View RelatedOn my Windows 7 PCs I must type a user name to access the shares it can be 1 letter or anything is there a way to remove that so access doesn't require any type of additional input?
View 3 Replies View RelatedLong time XP user and I just starting using Windows 7 beta. I really like it so far. Except there's a few things I can't figure out.
I'm trying to connect to my own Wifi Network and it has WEP encryption (I know I should use WPA but for now, let's say i'm stuck with WEP), Windows 7 keeps prompting me for a user name, password after I already entire my WEP key. WHY??? XP never asked me for that. I tried the admin password for my router, didn't work. What is with this new "User name, password" requirement?
Please help. It's really frustrating. The only way around it is to manually add network. There must be something I'm doing something wrong.
Very often the sound on my system seems to get "locked up" after listening to music (MediaMonkey) or watching a movie (VLC or WMP) and there after when I attempt to play a video or listen to music, the progress bar won't move and videos won't play.
It's as though the resources lock on one program and aren't released. I suspect it might be due to my using an M-audio Audiophile 2496.
The only way to release it is to reboot. When I do so whatever has it locked releases in time to play the closing chime. After reboot the sound works normally - for a while.
Oh yeah, closing the program (MediaMonkey or whatever) doesn't have any effect.
I have a desktop icon for opening CorelPaint Shop Pro Photo XI that has a yellow security sheild on it (not the case for 10 other program shortcuts). Executing the shortcut brings up an "Unknown Publisher" UAC warning. Not a show stopper but annoying as all get out. I have been playing with the Security properties for the shortcut and the exe file to get this to go away but no joy.
Does anyone have a step by step to stop this behavior?
After upgrading to Windows 7 everything worked fine for about 3 months. I had it set to sleep when I close the lid nnd it worked well. But suddenly it began getting pernickity. When I opened the lid, about 15 - 20 seconds later the computer totally froze and I had to reboot. Of course, when reloading I get the message that Windows shut down unexpectedly and a 'solution will be searched' but nothing every happened as far as that goes.I made a new profile but it did the same thing when working in that.At approximately the same time as this began, I lost my 'start menu' list, and although I can 'attach items to the list, upon reboot, they disappear.
View 2 Replies View RelatedI work on my Gateway while sitting on the couch. I surf the Internet and then watch TV. I surf a little more, and then I watch more TV. Some nights, when I slide the computer near me because I've shifted in my seat, the screen will go black and I have to push the On/Off switch until the computer shuts down. The computer, when the screen goes black, is still on, but no fingerpad strokes or combination of key stokes will turn the screen back on. Super frustrated about having to turn the computer off "the wrong way" a couple of nights a week.
View 5 Replies View RelatedI reinstalled windows, and went with AHCI for eSata hot swap. 2 of my 6 drives did not appear in my computer. 1 of them I just assigned a drive letter in DM and it is fine. The other, which was previously working, says it requires initialization, which I did, and assigned a drive letter. I stopped short of performing a format ( to preserve the data) but it is listed as raw and inaccessible.
I am not sure what to do now as I have a raw drive that I cannot access...which a few hours ago had several hundred gigabytes of data. The drive in question is a 1tb seagate 7200.11. The other thing I did was move the drive from a jmicron controller to an intel controller on the MB. All 6 drives are now on the intel controller sata ports.
my computer is freezing up requiring a manual shut down and sometimes restarts by itself. My cpu fan went bad and i just had that replaced. Sometimes it takes 30-45 min before it acts up but most of the time it does it shortly after i boot it up. I have done a full reformat on the computer, installed windows again and everything.
View 1 Replies View RelatedI have been recently experiencing a strange crash that happens on my computer frequently. So far, in the ~10 times it has occured over the last 3 days, it has crashed mostly during my gaming time - until now. I was writing this when it happened again. Basically, all sound starts a loop and nothing works at all. I initially thought it was overheating in my computer so I ran some temp. checks while playing games and nothing in my computer was breaking 75 deg. C, so I ruled that out. I ran anti-spyware and anti-virus - nothing.
The only changes my computer has made since I noticed the crashes are the following: installed a few programs, added 3 400gb hard drives to my computer, and swapped out my PSU from a Kingwin 730w (cheapo) to an Antec HCG-750w, a much nicer version. I doubt it's any of the programs, most are games, and I'm not leaning towards the HDDs since there is no information on them at the moment. Could it have to deal with my power supply? Nothing is overheating, as I stated before, but maybe something isn't fully plugged in? I have no idea.
On a side note - when I added those hard drives, I remember booting up and not getting any boot. I opened my computer back up and I noticed I had bumped the power cord on the boot drive, plugged it back in, and rebooted. Everything went fine from there..
Ok, so I am going to try to explain this as thorougly as possible while trying not to sound like an idiot in the process. I am by no means computer savvy so anyone that has any advice will more than likely need to talk to me like a 5th grader. I am ok with that. Since installing a Windows Update about a month ago, my screen will randomly lock up. At times it will clear itself after a couple of seconds and state something to the effect that "display driver amd has stopped working and recovered." Other times it will stay frozen for about 10 minutes and then will start functioning properly again. More often than not though, it will stay frozen indefinitely and require a hard reboot. This happens during mundane activities. No extreme gaming going on. Generally it is while just browsing the net. It tends to happen more often to my wife who uses it during the day to work through a VPN. I don't believe there is any correlation though. I have read multiple forums on the web and have tried several things, from cleaning the registry to uninstalling the driver software and reinstalling it in safe mode. The latter seemed to work last night but today my wife started having the same issue again.
View 8 Replies View RelatedEvery once in a while, my laptop loses connectivity and cannot be reconnected to the wireless signal unless I turn the computer off and restart.
View 9 Replies View RelatedI have been using Norton products since the day I bought a computer and have found that it is pretty much a resource hog when I am trying to play video games like the newest game Battlefield 3. What antivirus software is a low resource hog and does not take up many resources to run the computer? I would prefer free, but I can buy it as well if that needs to be necessary.
View 6 Replies View RelatedWhen I go to Control PanelAll Control Panel ItemsPerformance Information and Tools and click "Rate this computer," it crashes before it's done.Desktop Window Manager Sessions Manager is disabled, not running, and the option to start it is greyed out. sfc scannow didn't finish, so I ran it at boot (url) That gave me the error "There is a system repair pending which requires reboot to complete." I rebooted into windows and then back to the disc several times and got the error each time. My computer does not have a pending.xml file. Since sfc scannow wasn't working, I tried to do a repair install (as described here: http://www.sevenforums.com/tutoria [...] ml?ltr=R). I ran the compatibility check (by clicking "upgrade" after starting setup) on the windows 7 disk and it gave me this message: "Windows needs to be restarted so necessary changes to system files can be made before continuing." Restarting, however, does not accomplish this. What can I do? It seems my main problem right now is finishing up whatever Windows thinks it needs to update on a reboot (I've rebooted many times since discovering the message.
View 2 Replies View RelatedI just tried sfc/scannow and I got the following message: There is a system repair pending which requires a reboot to complete. Restart windows and try sfc again.I'm thinking this repair pending is from the chldsk/r I completed previously. This is great, except when I reboot, the repair does not startup and the system just goes back to the Windows Error Recovery screen I had earlier. How do I get the repair to complete?
View 6 Replies View RelatedI can run World of Warcraft and Battlefield 3 at max settings and NOTHING happens. Runs like a dream. However if I play any over games such as Skyrim or the Witcher 2 my computer will completely crash to a black screen and then a weird buzzing noise which lasts 1-2 seconds. It will then require a hard reset.
This crash only happens when I play video games and it seems adjusting the settings doesn't seem to change anything. High or low settings it will still crash. I have ruled out Temperature I think. At it's hottest my GPU will be at about 55C.
My Specs- Operating System:
Windows 2.6.1.7601 (Service Pack 1)
CPU Type:
Intel® Coreā¢ i7 CPU 960 @ 3.20GHz
CPU Speed:
3.2 GHz
System Memory:
7.99 GB
Video Card Model:
NVIDIA GeForce GTX 580
Video Card Memory:
3.97 GB
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies View RelatedI regularly use my acer aspire 5552 ati 4250. I have norton antivirus installed but somehow more over I have a virus. It takes approximately 45 minutes for the laptop to go to the start up page, but there is no text. When it loads up to a stage I can put on the Internet I can input text into google but again, this takes a long period of time. When I press (e.g.) ALT + F the tiniest of drop down bar appears and I cannot access anything on there, this happens with anything related to right clicking to using shortcuts as things are not viewable.
Furthermore, the laptop is in safe mode at the moment and I cannot access windows or due to the fact I cannot access drop down menus or control panels as there is no text
AVG stopped a program DWU.EXE from loading but since then I can not launch apps via the desktop or by directly clicking them unless I right click and load as admin. All virus scans (AVG, Windows malicious virus remover tool and Ad Aware) come out clean.Do not want to reload Win7 or restore if I don't have to
View 1 Replies View RelatedAny time I start an application that requires a moderate amount of processing, the whole computer skips. By skips, I mean the audio glitches and makes an annoying sound, the video freezes for a fraction of a second before catching up, etc. I was working on a video editing project last night, for instance, and this problem got really bad then. Now it happens whenever I try to play music through iTunes, or even a video online. So far, I have tried updating video card drivers, checking for updated chipset drivers, checking for possible overheating - nothing has helped. The Computer: I just bought the base components for this computer and received them in the mail less than a week ago. I put it together one night last week, and I noticed this issue as soon as I imported my music and got some working speakers attached. (It's much more noticeable with audio) [code]
View 3 Replies View RelatedWhen my computer starts up it goes directly to a black screen with 2 options. 1st is recommended-launch statup repair(may not be worded right, and 2nd is start windows normally. Windows tries to start up normally, fails and returns to this screen. I have done the repair multiple times but it says nothing is wrong. It does say an external device may be causing the problem but nothing id connected. I have tried all the options. It will not go to a previous point. When I attempt to return to factory settings it says a program is trying to end in an unexpected way and will not prodeed.
View 2 Replies View Related