For about a month now, I have had this Widows 7 logon annoyance: Sometimes this annoying glitch occurs which won't allow me to login to my account even though I have entered the password correctly; I have to click the Switch User button and then the 'logged in' account. My laptop is set to stay on when I close the lid; I normally ctrl-alt-del and close the lid.
View 4 RepliesI'm currently administrator of a couple different groups of computers at a university, and I've been looking into changing the layout of the logon screen. I've found a lot of information, but something that I have wanted from the start has eluded me. I'd like to set the logon screen (or welcome screen I suppose) to display only one available account: the guest account that I have personalized for professors or students to use (not the same as the default Windows guest account). I would also like to have the option to switch users at the logon screen, preferably with the on-screen button that says switch users which I can't seem to get to display using my methods.
System Specs All of the PCs I am administrating have some differences... Simply put, I have a bunch of desktops running Windows 7 Pro x64, and a bunch of NetBooks running Windows 7 Starter x86. I've made my attempts on one of the NetBooks thus far since I can carry it around. On Windows 7 Starter it seems that "Switch User" is disabled, but I think it is still in the PC because when I tried a Registry Hack that hides all user accounts except the one that was last logged into, I had the option to switch users, but only when the account I last used had a password. The guest account does not and cannot have one. Anyway, the registry hack I just mentioned involves going to HKEY_LOCAL_MACHINE..... and creating a bogus key under the ProfileList key.
I also tried a similar thing to the above which didn't work, I can't remember what it was though.I have also tried hiding the default administrative account I made while keeping the other account visible, but this results in me not being able to log into that account from the Login screen, and the system will automatically login to the guest account because it doesn't have a password. Not necessarily a bad thing, but I need a way to get into the other account. This was done by changing HKEY_LOCAL_MACHINESOF... and adding the account to hide as a 32 bit DWORD. Don't hide all of your administrator accounts in this fashion, or you'll be screwed FYI.
The third thing I tried was adding an entry for fast user switching and enabling/disabling it, in HKEY_LOCAL_MACHINESOF.... and adjusting the "HideFastUserSwitching" key. This didn't seem to have any effect.I also tried various combinations of the above, but that didn't get me the outcome I was looking for either. This has all been on the netbook, but I'm looking for a solution that will work on the NetBooks and the Desktops.
just got Windows 7 ultimate, i got it with an admin/admin account, created a new admin account, and then deleted the old one, also changed the computer name etc...
one weird thing happens im not sure if its related... When i lock the computer, or gets locked by screen saver etc, when i try to logon it gives me incorrect password, i then click switch user and type my password and its ok..
happen to anyone?
I just want to know how to create a user profile logon for the docked and undocked logon in Windows 7?
View 1 Replies View RelatedWhenever I switch user accounts the computer will start the switch and then lock up with a display message that says no signal on the monitor. It happens if the computer has been running for hours or only a couple of minutes. I have to shut the PC off and leave it off for 20-30 minutes. I can then restart and enter any user account. But if I try to switch user or logoff and pick a different user the whole cycle begins anew.
View 4 Replies View RelatedI accidently screwed up the administrator account and once, i tried to install a software and it came "You need a administrator password to proceed"so i typed it then it came the error"this user has not been granted the requested logon type at this computer i tried a lot but its still not working and i cant install anythin.
View 5 Replies View RelatedEarlier today I turned on my Toshiba laptop (Satellite P855-S5200) and got some sort of error screen, and then it brought me to a screen asking if I wanted to do a system repair or start windows normally. I chose system repair, but then it seemed to get stuck in that process (It was taking forever and nothing was happening), so I turned off the laptop (I know, big no no), booted in safe mode, and did a system restore to a restore point from about a week ago. The "starting Windows" screen came and went, no problem. Everything seemed fine till I got to the User Selection screen (the default blue one with the little hummingbird or whatever). Then it just sat there on that screen. I could see the hummingbird and the little squiggly lines, but there were no buttons to click my user. I just let it sit there, and after about 5 minutes, the user names popped up, and I was able to continue using the computer without any problems, no other speed issues whatsoever. It now makes me wait every time, always about 5 minutes, before the user names pop up. It does this when I restart the machine and when I try to switch users.
It is a Pentium Core i7
2.3 Ghz
8 GB RAM
Windows 7 Home Premium 64 bit
On my Windows 7 PCs I must type a user name to access the shares it can be 1 letter or anything is there a way to remove that so access doesn't require any type of additional input?
View 3 Replies View RelatedI use windows 7.When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.
View 9 Replies View RelatedI am a lab technician for Microsoft classes at a community college. One of our students somehow messed up his hard drive. The computer is running Windows 7 Enterprise SP1 64-bit. The system has two administrator accounts and one standard user account. I am still able to logon with those accounts and there are SID keys for each of these users in the registry.
Now when we create a new user, the account is created without any problems. The user shows up on the logon page and after running the net user command, it shows up there as well. When I try to logon with the new user, I get a message: The User Profile Service failed the logon. User profile cannot be loaded.
None of the new user accounts show up in the registry. The other anomaly that I see is that the Default User folder is missing in each of the Users subdirectory for the three accounts where I have no problems.
I have read the Microsoft Knowledge Base Article 947215 and none of the methods apply to my problem. I also checked Local Group Policies and the Do not logon users with temporary profiles setting is not configured.
For about a couple of weeks now I cannot seem to be able to switch to either my Guest user account or any other account for that matter (I had added my roommate as another user for the past year and things were running smoothly). I subsequently deleted his account after this problem started but STILL cannot switch into the GUEST account.
The switch user page loads, but immediately after clicking on the GUEST icon, the screen attempts to switch by changing BUT a few seconds into the mode reads "logging off" and then immediately reverts back to the icon screen with no progress.
I'm running Windows 7 Home Premium 64-bit. This is kinda frustrating, any help or suggestions would be greatly appreciated.
I recently installed Windows 7 Home Premium 64-bit on my system. Everything runs great except one thing. I'm not able to switch users like I used to on my Vista system. The 'switch user' is greyed out. I have 3 user accounts on my system. On my earlier Vista system, if i were to put the system in standby mode and then re-open it again, it would show me a password field (since that account was password protected) and a 'Switch User' button below the password field. However no such thing shows in Win 7. Both the vista and win 7 were home premium editions.
View 9 Replies View Relatedeverytime my laptop go sleep then when i wake it up everytime the switch user screen shows up but no password needed how do i remove this or disable this?
View 1 Replies View RelatedI recently just battled the virus Win32:Small-NNE [trj] from the Anti-Phishing Domain Adviser program that was installed, without my knowledge. Now that it is removed and I am declared virus free by Avast, Malwarebyes and Spybot Search and Destroy I started my computer up in normal mode. However, after logging in it is just black with a white cursor. I have two monitors, but in case it matters there is only one cursor and it can move to either screen. I cannot access crtl + alt + del for the task manager and it just sits and sits. I didn't have the patience to wait more than ten minutes because I know its not supposed to do that. Prior to the virus issue it booted in less than thrity seconds all the way to my desktop. Oh, and the time from log-in to supposed desktop screen is longer than usual but still not more than a minute or two. is this repairable or did the virus do permanent damage to my pc? If it is, please please instruct me on how to fix it, since it does still run in safe mode.
View 1 Replies View RelatedI'm fairly technical and was a network and tech Director for a few years so have some familiarity with prior Windows versions but Win 7 is a bit new to me. I went to login today, and my login picture had been changed. Looking in Windows Event Viewer under Security, I can see it occurred at 12:25 in the morning. I was on another computer at that time, and running a utility from Microsoft on the PC in question that just collects system information.I was trying to figure out why it changed and reviewing the event logs. I don't see the reason, only that an account change occurred. I replicated it by changing my picture again to another one, and the same system event occurred confirming its identity.So basically, I had a flower as the login picture. On its own, it changed to a fish. I didn't make the change. I wasn't even using this machine at that time; however a Windows utility from MS was running -- but -- I reran that same utility tonight (it's one that just reports system usage) and it did not change the picture so I believe that is coincidence. why would Windows 7 change the default logon picture for a user on its own to something else? To help with information the utility that MS had me run was the Microsoft Product Support Reports.
There are also multiple instances on this computer, the one where the picture changed on its own, of another PC that was running Windows 2000 logging into it as a SYSTEM, and then logging back out, then in and out continuously but not in a pattern that would make me think it was a process. My other machines on the network do not have that issue in the log file.I checked the McAfee Firewall, and it was enabled. It has been catching attempts to login to VNC but they've been denied. VNC is also disabled.
Im having some problems after i boot my computer with Windows 7 x64. After the usual startup process which is fine, it logs onto my user and the screen just goes all black.. No taskbar, icons or anything. Mouse clicking doesn't work, and only occasionally i can provoke the taskmamager to work with ctrl, alt, del.. But what ever i click there it just sends me back to the black screen.. Its really annoying and ive considered just formating it, but the windows cd i have is only an upgrade version which i cant use as it just says the system is too new.. And i really cant afford a new win 7 cd.. Especially not with the soon release of win8..
View 1 Replies View RelatedI would like to know how to create a hotkey that allows me to automatically switch to the Guest account without having to click switch user in the start menu and then click the guest account.
Once I am logged into the guest account I would like to use the same hotkey to switch back to the administrator account which has a password.
Example
Current screen: administrator (has password)
Press hotkey
New screen: guest account desktop
Current screen: guest account desktop
Press hotkey
New screen: screen with prompt for administrator password
Also can somebody tell me where I can edit the user rights, settings, etc for the guest account?
With the user accounts on my computer if someone leaves there's on adn the screen goes to screensaver, or then long enough to hibernate, when we go back on it goes to the user account who last left it on. Just want to know if theres a way to set it so say if I left my user aco**** on and then it went to screensave that when I moved the mouse it would go to the switch user screen. So my account can still be logged on about it will show the user aco****s screen when I move the mouse/wake up computer.
View 8 Replies View Relatedhey guys just was wondering how to byps andthen reset the my administrator password?
View 3 Replies View RelatedI have a Toshiba laptop with Windows 7 OP and gave it to a employee for work. He didn't pass a licensing test and couldnt be hired. The employee disabled the switch user option and I cant log onto the computer now. He has disappeared and cannot be contacted. How do I enable the switch user option again.
View 8 Replies View RelatedI have only one user account in the login screen. Recently, when I try to log in after my laptop has gone to power saver mode my password is rejected (initial login @ startup is not a problem). I try multiple times being very careful and it always gets rejected, every time, for 3 days now. It says "locked" under my account icon, above the password entry field. I hit the "switch user" button and the screen refreshes showing my icon and says "logged on" above the password entry field. I can then successfully enter my password (excatly the same as I did before) and it is accepted. CAP LOCK is off! Nothing changes accept the word "locked" changes to "logged on".
What is happening and how can I get rid of this annoying feature/bug. I have not installed new software. I already changed my account password to see if that would help. I also deleted the ASP.net account. Neither one did anything. After reading I probably should have keep the ASP.net account..
Our office used Windows 7 pro 32bit, when new PC come out team install OS and other application for user, but we used usr name "IT" that have permission to install on our domain. we have 1 LPT Driver , and 2 Network printer. I complete to install printer and can print out, but when I switch user to "IT1" that have permission only user. on IT1 user we not see any printer on "device and printer" but when we open microsoft outlook and select "print" we can found printer that user "IT" add, How I can set every user that login to this computer can see printer that add by user "IT"
View 3 Replies View RelatedNow this is the first time that i have loaded a 2nd profile on my laptop. I have the same version on my desktop and it works without any issues. But on my Sony Vaio laptop i cannot get fast user switching to work at all. I have worked ont his for 2 days now. Ive tried all the forums and all the little hacks for regedit,gpedit...etc etc. Nothing is working.... does anyone out there have a fix for this or am i just doomed to have to log off when i want to switch accounts?
View 1 Replies View RelatedHow to Create a Switch User Shortcut in Windows 7 ?
View 0 Replies View Relatedkeep getting switch user sign after little while how can i cancel this
View 2 Replies View RelatedWhy is this so complicated????? I just want the old exit button and a new sign in user.
View 10 Replies View RelatedI have a dell Inspiron 17R, On a night before my computer was working like a charm, then after the night i start it up and everything works fine until i logon and then the computer is responsive for a couple of clicks then it does not work it freezes and stays that way, I am currently running scans in both kaspersky and antimalware.so fore no virus. [CODE]
View 1 Replies View Relatedi've windows 7 professional RTM and it work very well ... i'm really happy for this os
but i've a small problem. i'have 5 local user and i want to see all user in logon screen but windows show me only the last one logged in ...
how can i set up my os for show me all user?
notes:
1) no user have password
2) administrator account is disable
3) all user are administrators
4) i not do anything before for change settings of my logon screen
someone can help me ?
Basically, I have two user accounts on the system. When User1 hits "Windows Key+L" to lock the machine and User2 comes along and clicks "switch user", the monitor will flicker to black and say "Entering power save", while the monitor's power light switches from green to amber. After 5-10 seconds, the monitor will come back on (light goes back to green) and present the main login screen that lists the user accounts.
User2 then selects their account, types in their password and attempts to log into Windows, and again, monitor flickers to black, says "Entering power save" and stays black for a few seconds, only to re-appear and show the user's desktop. Nothing is affected, but it's just a real nuisance during what's supposed to be "fast" user switching.
This monitor flickering happens on every user switch, regardless of who initiates it. Both users also have identical graphical setups.
Graphics card is an ATI X1900XTX and monitor is a Dell 2007FP. I've tried running the built-in Windows WDM ATI driver as well as the ATI Catalyst 9.1 driver but it didn't make a difference.
How do you unlock a computer (Windows 7 Enterprise) that has been locked by the previous user and "Fast User Switching" has been turned off? A little more details:The desktop reads, "Press Ctrl, Alt, Delete to unlock this computer" and below that its displays the user who is currently logged in and locked the computer. When you do press Ctrl, Alt, Delete to unlock the computer you are presented with an icon of the user account, the user's domainusername and a button labeled "Cancel."There is also the button in the lower right corner for "Ease of Access." In this situation, how do you unlock that user account or log that user off?
View 9 Replies View RelatedWhen I boot up I get to the sign in page .When I sign in I get the message: User Profile Service Failed To Logon and things go round in a loop, I can't get to the Start Menu.
View 6 Replies View Related