Our office used Windows 7 pro 32bit, when new PC come out team install OS and other application for user, but we used usr name "IT" that have permission to install on our domain. we have 1 LPT Driver , and 2 Network printer. I complete to install printer and can print out, but when I switch user to "IT1" that have permission only user. on IT1 user we not see any printer on "device and printer" but when we open microsoft outlook and select "print" we can found printer that user "IT" add, How I can set every user that login to this computer can see printer that add by user "IT"
Whenever I switch user accounts the computer will start the switch and then lock up with a display message that says no signal on the monitor. It happens if the computer has been running for hours or only a couple of minutes. I have to shut the PC off and leave it off for 20-30 minutes. I can then restart and enter any user account. But if I try to switch user or logoff and pick a different user the whole cycle begins anew.
Earlier today I turned on my Toshiba laptop (Satellite P855-S5200) and got some sort of error screen, and then it brought me to a screen asking if I wanted to do a system repair or start windows normally. I chose system repair, but then it seemed to get stuck in that process (It was taking forever and nothing was happening), so I turned off the laptop (I know, big no no), booted in safe mode, and did a system restore to a restore point from about a week ago. The "starting Windows" screen came and went, no problem. Everything seemed fine till I got to the User Selection screen (the default blue one with the little hummingbird or whatever). Then it just sat there on that screen. I could see the hummingbird and the little squiggly lines, but there were no buttons to click my user. I just let it sit there, and after about 5 minutes, the user names popped up, and I was able to continue using the computer without any problems, no other speed issues whatsoever. It now makes me wait every time, always about 5 minutes, before the user names pop up. It does this when I restart the machine and when I try to switch users.
It is a Pentium Core i7 2.3 Ghz 8 GB RAM Windows 7 Home Premium 64 bit
I use windows 7.When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.
I would like to know how to create a hotkey that allows me to automatically switch to the Guest account without having to click switch user in the start menu and then click the guest account.
Once I am logged into the guest account I would like to use the same hotkey to switch back to the administrator account which has a password.
Example
Current screen: administrator (has password)
Press hotkey
New screen: guest account desktop
Current screen: guest account desktop
Press hotkey
New screen: screen with prompt for administrator password
Also can somebody tell me where I can edit the user rights, settings, etc for the guest account?
For about a couple of weeks now I cannot seem to be able to switch to either my Guest user account or any other account for that matter (I had added my roommate as another user for the past year and things were running smoothly). I subsequently deleted his account after this problem started but STILL cannot switch into the GUEST account.
The switch user page loads, but immediately after clicking on the GUEST icon, the screen attempts to switch by changing BUT a few seconds into the mode reads "logging off" and then immediately reverts back to the icon screen with no progress.
I'm running Windows 7 Home Premium 64-bit. This is kinda frustrating, any help or suggestions would be greatly appreciated.
With the user accounts on my computer if someone leaves there's on adn the screen goes to screensaver, or then long enough to hibernate, when we go back on it goes to the user account who last left it on. Just want to know if theres a way to set it so say if I left my user aco**** on and then it went to screensave that when I moved the mouse it would go to the switch user screen. So my account can still be logged on about it will show the user aco****s screen when I move the mouse/wake up computer.
I have a Toshiba laptop with Windows 7 OP and gave it to a employee for work. He didn't pass a licensing test and couldnt be hired. The employee disabled the switch user option and I cant log onto the computer now. He has disappeared and cannot be contacted. How do I enable the switch user option again.
I have only one user account in the login screen. Recently, when I try to log in after my laptop has gone to power saver mode my password is rejected (initial login @ startup is not a problem). I try multiple times being very careful and it always gets rejected, every time, for 3 days now. It says "locked" under my account icon, above the password entry field. I hit the "switch user" button and the screen refreshes showing my icon and says "logged on" above the password entry field. I can then successfully enter my password (excatly the same as I did before) and it is accepted. CAP LOCK is off! Nothing changes accept the word "locked" changes to "logged on".
What is happening and how can I get rid of this annoying feature/bug. I have not installed new software. I already changed my account password to see if that would help. I also deleted the ASP.net account. Neither one did anything. After reading I probably should have keep the ASP.net account..
I recently installed Windows 7 Home Premium 64-bit on my system. Everything runs great except one thing. I'm not able to switch users like I used to on my Vista system. The 'switch user' is greyed out. I have 3 user accounts on my system. On my earlier Vista system, if i were to put the system in standby mode and then re-open it again, it would show me a password field (since that account was password protected) and a 'Switch User' button below the password field. However no such thing shows in Win 7. Both the vista and win 7 were home premium editions.
Now this is the first time that i have loaded a 2nd profile on my laptop. I have the same version on my desktop and it works without any issues. But on my Sony Vaio laptop i cannot get fast user switching to work at all. I have worked ont his for 2 days now. Ive tried all the forums and all the little hacks for regedit,gpedit...etc etc. Nothing is working.... does anyone out there have a fix for this or am i just doomed to have to log off when i want to switch accounts?
Basically, I have two user accounts on the system. When User1 hits "Windows Key+L" to lock the machine and User2 comes along and clicks "switch user", the monitor will flicker to black and say "Entering power save", while the monitor's power light switches from green to amber. After 5-10 seconds, the monitor will come back on (light goes back to green) and present the main login screen that lists the user accounts.
User2 then selects their account, types in their password and attempts to log into Windows, and again, monitor flickers to black, says "Entering power save" and stays black for a few seconds, only to re-appear and show the user's desktop. Nothing is affected, but it's just a real nuisance during what's supposed to be "fast" user switching.
This monitor flickering happens on every user switch, regardless of who initiates it. Both users also have identical graphical setups.
Graphics card is an ATI X1900XTX and monitor is a Dell 2007FP. I've tried running the built-in Windows WDM ATI driver as well as the ATI Catalyst 9.1 driver but it didn't make a difference.
everytime my laptop go sleep then when i wake it up everytime the switch user screen shows up but no password needed how do i remove this or disable this?
How do you unlock a computer (Windows 7 Enterprise) that has been locked by the previous user and "Fast User Switching" has been turned off? A little more details:The desktop reads, "Press Ctrl, Alt, Delete to unlock this computer" and below that its displays the user who is currently logged in and locked the computer. When you do press Ctrl, Alt, Delete to unlock the computer you are presented with an icon of the user account, the user's domainusername and a button labeled "Cancel."There is also the button in the lower right corner for "Ease of Access." In this situation, how do you unlock that user account or log that user off?
just got Windows 7 ultimate, i got it with an admin/admin account, created a new admin account, and then deleted the old one, also changed the computer name etc...
one weird thing happens im not sure if its related... When i lock the computer, or gets locked by screen saver etc, when i try to logon it gives me incorrect password, i then click switch user and type my password and its ok..
A very minor question. I was wondering if it's possible to show the "Welcome Screen/Switch User" screen after the computer is woken up from screensaver or standby. I know it's really easy for a user to click on the "Switch User" button on the "lock page", but still I want to make it easy for my mom.
I have a couple of programs who's icons I have set to always show, one of them is mailwasher for example. Everything is fine until my wife logs onto her account when I log back onto mine mailwasher becomes hidden again by. So it means I have to unhide it every time she logs on. It's not all icons that do this
For about a month now, I have had this Widows 7 logon annoyance: Sometimes this annoying glitch occurs which won't allow me to login to my account even though I have entered the password correctly; I have to click the Switch User button and then the 'logged in' account. My laptop is set to stay on when I close the lid; I normally ctrl-alt-del and close the lid.
I wanted to switch users a few days ago, but when I clicked the start button and clicked the arrow next to shutdown, it says lock, log off, restart, or sleep. The switch user option used to be at the top.I have tried going into the registry and finding HideFastUserSwitching, which I had to create a DWORD value for, because it wasn't there - needless to say that didn't work.I was told to also enable the Fast User Switching service in service.msc, but it wasn't on the list.I have tried going to task manager and clicking the 'users' tab which miraculously disappeared - replaced by a TCP/IP tab.
I'm currently administrator of a couple different groups of computers at a university, and I've been looking into changing the layout of the logon screen. I've found a lot of information, but something that I have wanted from the start has eluded me. I'd like to set the logon screen (or welcome screen I suppose) to display only one available account: the guest account that I have personalized for professors or students to use (not the same as the default Windows guest account). I would also like to have the option to switch users at the logon screen, preferably with the on-screen button that says switch users which I can't seem to get to display using my methods.
System Specs All of the PCs I am administrating have some differences... Simply put, I have a bunch of desktops running Windows 7 Pro x64, and a bunch of NetBooks running Windows 7 Starter x86. I've made my attempts on one of the NetBooks thus far since I can carry it around. On Windows 7 Starter it seems that "Switch User" is disabled, but I think it is still in the PC because when I tried a Registry Hack that hides all user accounts except the one that was last logged into, I had the option to switch users, but only when the account I last used had a password. The guest account does not and cannot have one. Anyway, the registry hack I just mentioned involves going to HKEY_LOCAL_MACHINE..... and creating a bogus key under the ProfileList key.
I also tried a similar thing to the above which didn't work, I can't remember what it was though.I have also tried hiding the default administrative account I made while keeping the other account visible, but this results in me not being able to log into that account from the Login screen, and the system will automatically login to the guest account because it doesn't have a password. Not necessarily a bad thing, but I need a way to get into the other account. This was done by changing HKEY_LOCAL_MACHINESOF... and adding the account to hide as a 32 bit DWORD. Don't hide all of your administrator accounts in this fashion, or you'll be screwed FYI.
The third thing I tried was adding an entry for fast user switching and enabling/disabling it, in HKEY_LOCAL_MACHINESOF.... and adjusting the "HideFastUserSwitching" key. This didn't seem to have any effect.I also tried various combinations of the above, but that didn't get me the outcome I was looking for either. This has all been on the netbook, but I'm looking for a solution that will work on the NetBooks and the Desktops.
Recently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that.It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users.I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account.
Recently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that. It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users. I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account. I need to get in my account, there are few specific programms that won't run.
My win 7 laptop seemed to hang at user logon, no mouse or keyboard response. I did forced shutdown. After that Windows detect some problem, want to do the recovery boot. It goes to the point where I see windows screen, I never see a logon icon. How long should I wait ? I try to boot from CD, the same. it hangs and I never see the user icons. I try to run the repair option from CD. It hangs at Starting setup.
