Windows 7 Stuck In Launch Repair?

Nov 2, 2011

When my computer starts up it goes directly to a black screen with 2 options. 1st is recommended-launch statup repair(may not be worded right, and 2nd is start windows normally. Windows tries to start up normally, fails and returns to this screen. I have done the repair multiple times but it says nothing is wrong. It does say an external device may be causing the problem but nothing id connected. I have tried all the options. It will not go to a previous point. When I attempt to return to factory settings it says a program is trying to end in an unexpected way and will not prodeed.

View 2 Replies


ADVERTISEMENT

Launch Windows 7 Startup Repair

Oct 18, 2010

Everytime i turn my computer on it launches into startup repair (recommended) Windows laoding files Starup repair is checking your system for problems do you want to restore your computer using system restore

View 3 Replies View Related

Windows Startup Repair Doesn't Launch

Jan 15, 2013

I started my computer this morning and it went straight to a black screen where I have to pick from two options:Launch startup repair or Start Windows normally. If I start normally, it just restarts my computer and goes back to the black screen. If I launch the startup repair, it goes to a screen with a Windows-style background and stays there doing nothing. From what I've seen online, there should be a window where I can choose to repair or reinstall Windows, etc. but I don't even get to those options.

I tried starting in safe mode and it looks like it's going through a long list of system files, then it stops and restarts my computer and it goes back to the black screen. Every solution I've seen online requires that pop-up window, which I never get to.

I also tried booting from my recovery discs and they just take me to the blank Windows background again. My computer was fine last night when I shut it down and I haven't downloaded or installed anything in ages.

View 9 Replies View Related

What Will Happen If Launch Start Up Repair

Jan 9, 2013

MY Laptop wont start windows normally and keeps on recommending start up repair. If I launch the repair, will it be automatically reformat? will I lost files on it?

View 1 Replies View Related

HP Pavilion - Quick Launch Button Stuck On Mute

Dec 29, 2009

I'm running Windows 7 Ultimate 64 bit and have the HP Pavilion dv7-1135nr here:

http://h10025.www1.hp.com/ewfrf/wc/product?product=3795411&lc=en&cc=us&dlc=en&lang=en&cc=us

A few days after installing windows 7 the Quick Launch mute button is stuck on (red) indicating that the system is muted whether or not it's muted in the system tray. No sound will come out of the external speakers but headphones work fine. I've tried uninstalling and reinstalling the sound drivers on the support page but that limits me to only using headphones OR internal speakers (even if headphones were plugged in) by setting it through Control Panel. System restore fixed the problem for 1 day and it reoccurred.

I've just installed the newest version from HP but it doesn't affect anything: HP Quick Launch Buttons HP Pavilion dv7-1135nr Entertainment Notebook PC - HP Customer Care (United States - English)

I found related topics with similar (but not the same) issue but none have solved the problem.

View 5 Replies View Related

Laptop Is Not Working - Launch Up Repair Is Not Starting?

Aug 22, 2012

my laptop is not working. launch up repair is not starting. i have dell's inspiron 15R laptop. when ever i start my laptop it ask for launch up repair and start window normalyy. i have gone through both options but still my windows in not starting. when ever i select launch repair blue screen arrives and no dialog box appear on screen for many hours.. what is happened with my laptop and why its not starting. there was no virus in my laptop, m sure abt it.. is my windows is not working properly or is there any problem with my hard disk?

View 3 Replies View Related

Windows Stuck From Setup Repair

Aug 24, 2011

i was wondering if anyone had advice/expierence with windows 7 not working past the welcome screen? yesterday i had been using google chrome and dl'd a song off Internet when suddenly the cpu shutdown. i thought it was powersave mode but it ended up being setup repair. i let a few hours pass and booted again,got to the home screen and it was my previous 3 accounts not a new one where all my files were moved. major problem was that neither my mouse or keyboard worked. i tried going into various safe modes but theyd all result in the same thing. the funny thing is thatboth mouse and keyboard work in the boot and bios but not at login.

View 4 Replies View Related

Windows 7 Stuck In Startup Repair?

Feb 22, 2012

I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.

View 12 Replies View Related

Stuck On Startup Repair Before Login To Windows 7?

Jan 27, 2012

Everytime I start my computer it goes into startup repair searching for problems. I tried going to F8 into safe mode but it goes bac to searching for problems in statup repair. Is there any way I can bypass it from going to startup repair page and go into windows.

View 3 Replies View Related

Windows 7 Stuck In YSstem Repair Screen

Dec 31, 2011

My laptop is stuck in the system repair screen and just stays there. Here's the background. His laptop was dog slow when he came home from college. The only way to boot it was in safe mode. I suspected a virus and ran multiple AV checks recommended on the Windows 7 support forum. No virus was found. Checkdisk and sfc/ scannow from cmd also failed to complete. Based on additional Forum info, I then tried to repair using the restore disks I made when I bought the Dell laptop. It worked fine until starting the repair and then hung at 1%. Eventually I turned off the power. Next I tried doing a custom Win 7 installation from a new disk (a fresh copy of Windows 7). It still tries to repair from the fresh Windows DVD and hangs on the system repair screen. I have powered off and tried to get back to safe mode unsuccessfully. How do I get out of this loop? BTW, it has not blue-screened at all.

View 9 Replies View Related

Fresh Install Of Windows 7- Gets Stuck In Startup Repair?

Jun 7, 2012

I did a fresh install of windows 7 home premium on a brand new HDD, and after doing windows update, it won't boot to the desktop

View 12 Replies View Related

Windows 7 Stuck In Endless Boot Cycle Startup Repair Freezes

Jan 22, 2012

So, I'm not exactly sure what I did. I was clearing up some space on my computer after using the Norton Removal Tool to get rid of this Norton trial popup that came up everytime I booted my computer. Now, after it told me to restart, it seems to be stuck in an endless boot cycle that resets itself after showing the Windows logo. I've since tried running startup repair, which freezes as it shows the progress bar for 'Windows is loading files'. Safe mode will not work, either. It just sends it back into the boot cycle. Not sure what to do at this point. My computer came pre-installed with Windows 7 Home Premium 64bit, so I don't have any startup discs.

View 3 Replies View Related

Windows 7 Boot Up Stuck At Starting Screen - Startup Repair Offline

Dec 10, 2010

Windows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:

Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033

View 1 Replies View Related

Stuck On Starting Windows - Repair Shows System Volume On Disk Corrupted

Oct 19, 2011

I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.

Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05: AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.2.0.0.256.1
Locale Id: 1033

View 1 Replies View Related

Stuck In Startup Repair?

Aug 7, 2011

I have a Sony Vaio laptop which is only a few months old. Here is the problem: i was trying to uninstall the trial version of office 2010 (after failing to activate it properly) and after going into control panel and clicking on "uninstall" to remove the office 2010 software, the computer automatically shut down and restarted and went into startup repair. after running this a couple of times, it said it was unable to fix the problems and asked to send the report to microsoft. then it just shut off by itself. i turned it back on and chose to "start windows normally." even then it went into startup repair and was again unable to fix the problems. then it just became stuck with a blank screen so i had to force power off. now i am not sure what to do. i don't want to keep restarting it only to go into startup repair and burn something out by turning it on and off so frequently.

View 8 Replies View Related

Stuck In Startup Repair?

Jul 12, 2012

I left the computer on for the evening and returned to it this morning only to find the Startup Repair Tool. I have attempt a number of different reboot attempts to no avail. Using F8 during start-up is not being recognized so I cannot boot up in Safe ModeHere is the Startup Up Repair Tools Readout:[CODE]

View 1 Replies View Related

Stuck In System Repair?

Apr 12, 2011

yesterday I was enjoying a match of league of legends on my computer and it completely froze up on me. I had no option but to give it the hard shutoff, so I held down the power button. Upon starting my computer back up, I was brought into system repair. It tried to repair and then said it could not be repaired, and so I restarted it. It then said it went into repairing once again and said it may take up to an hour. A minute later it said the errors were fixed, and restarted the system for me. It then continued to do that and has been doing that every time I restart it.I tried logging in to safe mode but it just brought me into system repair.I tried to restore to an earlier point but the restore failed.I tried using a Windows 7 Reinstall disk and had odd results. The first time it said a file was missing during the expanding files. The Second time it got to completing install and then said the disk was missing files to complete and to contact the disk manufacturer. I'm currently running it one more time to see if I can get it to work.All I have plugged in is the mouse, the keyboard, and the monitor.

View 1 Replies View Related

Laptop Stuck In Startup Repair And Can't?

Apr 30, 2012

I have a Dell Inspiron N4010 running Windows 7. Last night I was printing off PDF files and listening to a CD when the song that was playing got stuck and the print job I'd just ordered stalled. Then a horrible, loud, relentless sort of whirring noise came out of the speakers and wouldn't stop and the computer was completely unresponsive. This has happened before, last December, and I did what I did then...I just forcibly shut it down. When I started it back up, I could choose between starting normally or running Startup Repair, which was recommended. I swear I chose to start normally, but I can't be totally sure. I walked out of the room to do a couple things and when I went back I saw Startup Repair running and it said it could take over an hour. I had to leave for work in 20 minutes, so I decided to just leave it on. 9 hours later, when I got home, it was STILL going. I tried to cancel, and was informed that the current operation could not be canceled. I forced a shut down again (maybe not the brightest thing but I couldn't think of anything else) and even disconnected the battery. Then I started it up...got the same choice and chose to start Windows...and Startup Repair started again. I managed to cancel and shut down with the OFF button again. Restarted and chose Windows...same thing. Restarted and chose Setup Repair, same result. I cannot do or open anything. I don't know if putting the startup discs in it would even register...and I'm not sure I even have any, as Windows 7 came pre-installed. I haven't backed up my hard drive in a loooong time and I can't afford a new machine.

View 8 Replies View Related

Stuck In A Loop In System Repair?

Feb 16, 2013

I got a new computer on friday and have set it up today. I installed my windows 7 home premium 64bit and it downloaded,i then went on to put in my xfx AMD graphics card software disk and the download stopped half way through so i started it again and it got right to the last step where it has to re-start the computer. When it started up again insted of loading windows homepage it loaded the system repair screen, it searched and searched but said it had found no problem, so i clicked on the recovery tool restart option that then re-started the computer and the process started again and went straight back onto the system repair screen again. Is there anything i can do to stop it?

View 9 Replies View Related

Statup Stuck On Startup Repair Loop

Apr 19, 2012

my problem is rather odd (or at least I haven't seen it before). Whenever I boot up the netbook it goes right into startup repair, without the option to cancel it, even if I try to start windows in safe mode (or any other startup options for that matter), the system launches the startup repair.The repair itself runs fine (doesn't freeze or antyhing like that), however it is never able to fix the issue ("Startup Repair is unable to repair this computer automatically").

The problem details read as follows:

Problem signature:
Problem event name: StartupRepairOffline
Problem signature01: 0.0.0.0
Problem signature02: 6.1.7600.16385
Problem signature03: unknown
Problem signature04: 6

[code]....

View 9 Replies View Related

Stuck On Startup Repair Screen, Keeps Looping?

Jul 9, 2012

My granddaughter has a laptop with Windows 7 pre-installed. I went to turn it on after charging it and the Startup Repair window comes up. I can't get any System Repair options except for Startup Repair which can not repair the computer automatically. This is the problem details listed:

StartupRepairOffline
6.1.7600.16385
6.1.7600.16385
unknown
21200831
autofailover
20
NoRootCause
6.1.7600.2.0.256.1

I don't have much information on this laptop since we are on vacation. The only thing my daughter told me was that Windows was preinstalled. The laptop is ASUS.

View 9 Replies View Related

Computer Getting Stuck At Startup Screen - Repair Unsuccessful

Jun 2, 2011

Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.

View 2 Replies View Related

System Restore Saying No OS Installed - Repair Stuck In Loop

Jan 26, 2012

Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.

View 9 Replies View Related

Zoostorm Freedom - Stuck In Start Up Repair Loop And Can't Re-install?

Jun 25, 2012

has a zoostorm freedom which was working fine and now it's not!! It is stuck in a start-up repair loop. My husband has tried to follow solutions suggested on this site but no joy. Have also tried to re-install windows 7 but no luck either. Took it to PC world and they can't h

View 1 Replies View Related

Stuck On Startup Repair Screen Saying Repairing Hard Drive

Dec 9, 2012

Before I start this happened after updating the motherboard BIOS from version 1.4 to 1.7, I went to 1.6 after just in case the latest BIOS had a bug

I've been stuck on the startup repair for almost 5 hours saying that it's repairing my hard drive or whatever (i forget exactly what it said), I first booted linux to check the SMART data on the HDD (i now know that I can do it with HBCD too) it came back all fine. I am now running Hirens Boot CD and DRevitalise to scan and repair bad sectors.

System Specs:

i5 3570k @ stock
MSI Z77 GD55 BIOS Version 1.6
8GB Kingston HyperX 1600mhz
Running HD4000 graphics
500GB Blue WD HDD

I do have a DxDiag on the desktop of the pc in question which I could get if needed (to tired to do now)

Edit: Reinstalling is not an option I will consider unless there is nothing else that I can do.

Edit: Turns out there is a tool from WD for HDD testing, am running that now instead if the last one.

View 6 Replies View Related

Creating System Repair Disk - Process Stuck At Same Point For Last 5 Hours

Dec 6, 2011

I bought a new laptop yesterday and today decided to create a system repair disk. I inserted a blank DVD RW and started the process the progress bar went to about 60-70% (estimate, does not give actual progress %) in half an hour and has now been at that exact same point for the last 5 hours. I have had no errors and the window still says "creating disk..." and it still sounds as though the DVD drive is still writing onto the dvd. I Wouldn't think it would take this long to create especially with no progress.

View 2 Replies View Related

Windows 7 Won't Startup Properly - Stuck In Startup Repair Loop

Feb 18, 2012

I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').

I can't reinstall my computer because then I would lose my precious files.

Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?

View 1 Replies View Related

Couldn't Find Windows 7 Repair Disc / Repair System / Rewrite MBR

Nov 16, 2011

I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?

View 1 Replies View Related

Startup Repair - Windows Cannot Repair This Computer Automatically

May 11, 2011

I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".

View 8 Replies View Related

Windows 7 Nor Windows 7 Repair Disc Will Not Boot, Keep Getting 'startup Repair'

Feb 3, 2012

I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.

View 9 Replies View Related

No Text/cannot Launch Windows 7?

Sep 16, 2012

I regularly use my acer aspire 5552 ati 4250. I have norton antivirus installed but somehow more over I have a virus. It takes approximately 45 minutes for the laptop to go to the start up page, but there is no text. When it loads up to a stage I can put on the Internet I can input text into google but again, this takes a long period of time. When I press (e.g.) ALT + F the tiniest of drop down bar appears and I cannot access anything on there, this happens with anything related to right clicking to using shortcuts as things are not viewable.

Furthermore, the laptop is in safe mode at the moment and I cannot access windows or due to the fact I cannot access drop down menus or control panels as there is no text

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved