Windows 7 Requires Both HDD Drives Plugged In To Boot Up?
May 19, 2012
I have searched around here for my problem and can't find a solution to my problem.I have two SATA HDD's plugged into my computer, one of them has the operating system on it and the other one has my old XP installation and loads of others, although might have been formatted.When I tried removing the old XP one the computer does not boot up after bios, with the error along the lines of,"Can not find the boot device, please insert.
Whenever I plug in one of my external USB drives, Windows automatically pops up a window asking me if I want to scan it for errors. Where do I change settings so that it does not automatically do this every time.
I have an HP rp5700 system which is connected to a Windows Mobile (6.1) device. If the mobile device is plugged in and turned on, the computer will hang on the HP Event bootup options screen. None of the options will be displayed at the bottom. If I then either a) unplug the device b) undock the device or c) turn off the device, the boot options will appear, and Windows will then boot up without an issue.I tried changing the boot order, but to no avail. I've also tried unplugging the device, going into BIOS, and plugging the device back in - the BIOS screen gets really, really sluggish until I unplug/undock/switch off the device.
The BIOS is up to date. This doesn't happen with Windows XP Pro, only Windows 7 (Professional, 32-bit). One suggestion I heard was that Windows 7 has issues with connected devices it thinks are USB flash drives (although the device in question isn't in USB mode at the time). I have no other USB devices connected, as the mouse and keyboard are both PS2.
My laptop wouldn't boot yesterday, the fan came on and the 'on' led came one, it beeped when I plugged in the charger but nothing on the screen and no post beeps etc. I let the battery drain fully, plugged it back in once it powered off and it booted fine. I shut it down last night and it did the same today on boot up, nothing. Again, discharging the battery fully brought it back.
So I tried installing Windows on my new machine and did waht seemed to be the recommended thing and plugged in only my SSD into the Sata port, leaving my other drives unplugged until after the installation. Everything went fine and I was able to get Windows 7 up, drivers were installing and everything was peachy, but Then I plugged in my other drives, and when I did so with the computer running Windows immediately recognized them and I could access them, as well as do whatever I wanted. However when I restarted I got the message BOOTMGR is missing.
Now, you may be thinking that this is a simple issue of it trying to load from one of those other HDDs, just set the boot order in the BIOS blah blah. But its not. I set the boot order in the BIOS to use the SSD, I set the SSD to the top of the list within the HDDS priority order and still nothing. I then took it a step further and instead of selecting the order manually told it to boot from the SSD flat out, boot from this drive and the same error message came up. I already did the boot from Windows disc, startup repair thing - didn't work.
I have just installed a new P5G41T-M LX Series motherboard and two DDR3 x 2GB replacing DDR2. During startup a message says BOOTMGR is missing, press Ctrl Alt Delete to restart, on restart the same message is repeated.
I've already done with Dual Boot Windows XP and Windows 7. Initially i created 75GB of Raw partition when XP was installed.
1. When I goto XP my OS folder location is C:Windows and Windows 7 folder location I:Windows 2. When I go to Windows 7 my OS drive is C:Windows and Windows XP drive is D:Windows....
Currently, I'm not facing any problems, But wanted to know how & why its happening like that...??
Need to do Win 7 install on 50 gb partition and keep my 200+ win 7 install intact but don't want to use it as a boot and dont want to delete it just to get rid of Windows and boot. I want to use it just as a data drive. Dont want to have to activate the new small drive.
I'd like to set up two separate Windows 7 installations on my computer. I don't know whether this is possible, I know I can set up a dual-boot environment with an older version of Windows or Ubuntu. I have an OEM version of Windows 7 - is it possible to have the computer prompt me for which drive to boot?
I've got 2 separate hard drives, both with Windows 7 (let's call them "Drive A" and "Drive B" ). Drive A is my primary drive that I always want to boot up automatically upon restart, cold boot, etc. Now, if I want to use Drive B, I know how to go into the BIOS and re-assign the Boot Priority so that Drive B will start up. However, if I restart the computer (while working in Drive B), I want the computer to go back to booting up Drive A. In other words, I want the system to only boot up Drive B for only those times I manually specify it. I always want Drive A to remain as my primary boot up drive. Is there any way to set this in the BIOS? (The BIOS always seems to go by the last setting.)
My hard drive crashed. Bought a new one. Cloned another hard drive onto it. Old computer won't recognize the cloned drive but does in BIOS. I think the CPU was destroyed while cleaning the dust because it has prongs that clamped down and I couldn't see exactly where the gold pins were going to set in. Was very careful, but either the CPU is bad or the mother board is bad. Tested all other components in the working computer. Battery is fine. New cloned hard drive is fine. So I installed the cloned drive as a second OS drive in the working computer.I now have to share the computer with my husband until I get a new CPU or MB for my better, more expensive computer.Is it possible for him to log into "his" computer using "his" 1TB Sata HD, and then for me to come along and log into the cloned drive in his computer (2TB Sata HD) and do all of my work from that drive, so that when my own computer gets fixed, I'll have all the files I've worked on and programs installed that only I need on it and ready for use in my own computer, taking it out of my husband's computer after mine is fixed?
I'm sure I can go into BIOS and change the boot order whenever either one of us sits down to use the computer, but he's not going to want to do that each time, being pretty much computer illiterate as he is. Is there some other way to do a user switch easily during any time of the day when we need to share his computer?.
I have a M2010 running Windows 7 ultimate using raid. I was wondering if I put in a hd in the secondary spot if I could add XP Pro and dual boot. I have some things that work better under XP. I put my old laptop drive in and set the bios raid to auto detect/ata. It booted to 7 and installed drive E:. I didn't change any Matrix software settings so it's a raid/non raid setup.
I currently have Windows 7 installed on two separate drives in my box. I can only set (select) boot sequence in the BIOS. If I recall correctly, way back when a boot selection menu would appear when I think I was running Windows 7 (when it first came out) alongside XP but that screen no longer appears with my current setup. Is there a way to get that screen back, or an alternate way to select the OS of choice without the hassle?
I know at this point it's tricky and i should have done it before installing Windows 7 however...My new physical primary drive now has Windows 7 pro running exclusively the whole partition (cI'd like to add the drive that had XP pro running on the same PC.i'd like to get this running as a duel boot without corrupting the XP drive.
I have RAID 0 on two hardrives booting up 64 bit Win 7 running as SATA 0 and SATA 1.I have a third drive on SATA 2 from my previous Dell XPS which booted 32 bit Windows XP. How can I set up the system to give me a choice of either system?lthough Win 7 64 bit is faster, many of the 32 bit XP software programs will not run very well on Win 7 and in addition Win 7 doesn't allow the setting of of shortcuts the way XP does which means that Win 7 inevitably requires two key strokes to XP's one stroke.
I have separate ide drives one is installed with XP Pro and the other with windows 7. I want to have the choice of either os when the pc boots i.e. choose the drive to boot the pc.
i have two hard drives:A 250gb and a 1TBWhen I installed windows I chose the 1TB, but just left my other in there as it had some files I wanted on it. Now when I try to remove the 250gb drive, windows will not boot up.I tried marking the 250gb drive as inactive, but then during boot up it would say bootmgr is missing, so i had to use the installation disk then mark as active again.
I have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
Currently running Win7(64-bit) in RAID-0 on 2 WD Caviar Black's.I just purchased a SSD drive.What I want to do is load Win7 on the SSD and use that as my main drive, while also keeping my RAID drives boot-able and in tact as they are now. (Thus, a dual-boot Win7 setup)Will the BIOS allow me to select which drive to boot from upon start-up? My mobo is an ASUS Rampage II Extreme.
trying to load cardscan 8 on 64 bit win 7 computer program requires Microsoft .NET Framework 1.1 which is not supported by win 7 64 bit, is there an alternative to Microsoft .NET Framework 1.1 ?
I've got Win7 home premium x64. When I boot it says near the clock can't reconnect or can't connect to all network drives. I don't have any nor have I ever.
Here's my situation: I use 32-bit Windows 7, however, once per month I need to use 64-bit Windows 7. So I would like to install 64-bit Windows 7 to another drive. However, I don't want to see the dual boot menu on every restart. I only want to temporarily switch to 64-bit by pressing F8 (or whatever) to change booting device at bootup.
What's the proper way to do this?
Many years ago I used to have a situation where I had WinXP on one drive and WinXP on other drive. I could switch my C: (with WinXP) at bootup. It worked, except there was a problem: In some situations C:Windows and D:Windows or Programs Files were getting mixed up, automatically Start Menu pointed suddenly to D:Program Filessomething without asking me. I had used a clone software to clone the drive so that might be the reason why they mixed up together. Eventually removing the other drive might've crippled the system even my intention was to have two separate operating systems, just in one computer.
Basically I would like to have two C: drives with Windows 7-32bit and Windows 7-64bit. So in case one drive breaks, I'll have a very quick backup system ready.
Is it a stupid idea to disconnect the current C: drive and then install the new Windows to C: and then put the first drive in as well? Then I wouldn't have the dual boot menu, which might be what I want.
Is it possible to hide the dual boot menu, have it load 32-bit as default but still have a possibility to bring up the dual boot menu by pressing some key at bootup? In that case, is it possible to remove either drive and still boot up without problems?
i want to boot windows7 from my harddisk which i am using .
i mean to say that not from external hard disk drive.
i will try to explain again, actually i have a pc on which i am working at this time (internal or primary harddisk drive of it ). i want to reboot my system and when its bootsup then it should be stating setup of Windows 7 from one of my harddisk drive. for example from d: drive (D:/Windows 7)
SSD, HDD and DVD DRIVE. What should be the boot order for these three? Someone told me it was DVD>HDD>SDD and on a guide I read it was HDD>DVD>SDD. Is there actually a specific boot order or is it based more on what you're using it for or something like that? Not too sure which category to post this thread in since im building a new PC and I think that goes under 'Installation'... Or maybe it should have been in 'Hardware'...?
I have a 30GB SSD that is my default drive, with windows 7 on it. It's just too small and I need to switch to a larger one. I also have a 2TB HD with most of my games and other various programs on it. My question is, Can I just buy another SSD, install windows 7, and stick it in like nothing happened? Will I come across any errors because my 2TB is used to the old C: drive? OR, can I just do a full backup of the 30GB SSD and stick it on another drive and pretend nothing happened?
For about a month now, I have had this Widows 7 logon annoyance: Sometimes this annoying glitch occurs which won't allow me to login to my account even though I have entered the password correctly; I have to click the Switch User button and then the 'logged in' account. My laptop is set to stay on when I close the lid; I normally ctrl-alt-del and close the lid.
Where to download the proper drivers for Xtatix Peeper xca-pp2? Windows 7 is not allowing this program to opeate because it requires a digitally signed driver. I have visited the manufacturer's website, but it still does not work.
