Windows 7 On Two Drives Specify One To Always Boot Up Automatically?
Mar 14, 2011
I've got 2 separate hard drives, both with Windows 7 (let's call them "Drive A" and "Drive B" ). Drive A is my primary drive that I always want to boot up automatically upon restart, cold boot, etc. Now, if I want to use Drive B, I know how to go into the BIOS and re-assign the Boot Priority so that Drive B will start up. However, if I restart the computer (while working in Drive B), I want the computer to go back to booting up Drive A. In other words, I want the system to only boot up Drive B for only those times I manually specify it. I always want Drive A to remain as my primary boot up drive. Is there any way to set this in the BIOS? (The BIOS always seems to go by the last setting.)
View 4 Replies
ADVERTISEMENT
Aug 14, 2011
I use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
View 1 Replies
View Related
Dec 26, 2012
I just got an SSD, and immediately installed W7 on it. Got it all updated, backed up my other drive, and formatted the old one so it wouldn't be a boot disk. However, now Windows won't automatically boot from the SSD. I can hit the boot menu at startup and select the drive manually, but it does not show up in the arrangeable list of drives to automatically boot from. How do I make Windows automatically boot from the SSD? Windows 7 is fully installed and updated on it; it works fine when I automatically select it, but Windows refuses to notice it unless I tell it that it is there.
View 1 Replies
View Related
Apr 7, 2011
I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
View 2 Replies
View Related
Nov 7, 2011
I have Ubuntu dual booting on Windows 7. After the bios load, is there anyway that I can make Windows 7 boot right away without selecting anything on the OS selection? The same way it would boot without dual boot...if that makes any sense.If the above exists: Let's say I use Windows 7 all the time, but one day I decide to boot into Ubuntu. Is there a way that I can press a button, before Windows 7 loads, to make the OS selection come up?I tried to make myself as clear as possible and I hope that you understand what I'm trying to say.
View 9 Replies
View Related
Jul 31, 2010
I've already done with Dual Boot Windows XP and Windows 7. Initially i created 75GB of Raw partition when XP was installed.
1. When I goto XP my OS folder location is C:Windows and Windows 7 folder location I:Windows
2. When I go to Windows 7 my OS drive is C:Windows and Windows XP drive is D:Windows....
Currently, I'm not facing any problems, But wanted to know how & why its happening like that...??
View 6 Replies
View Related
Jun 24, 2012
Need to do Win 7 install on 50 gb partition and keep my 200+ win 7 install intact but don't want to use it as a boot and dont want to delete it just to get rid of Windows and boot. I want to use it just as a data drive. Dont want to have to activate the new small drive.
View 9 Replies
View Related
Dec 21, 2010
I'd like to set up two separate Windows 7 installations on my computer. I don't know whether this is possible, I know I can set up a dual-boot environment with an older version of Windows or Ubuntu. I have an OEM version of Windows 7 - is it possible to have the computer prompt me for which drive to boot?
View 5 Replies
View Related
Jul 26, 2012
dual boot windows 7 on two drives. how can i uninstall one
View 1 Replies
View Related
Jul 26, 2012
dual boot windows 7 on two drives. how can i uninstall one
View 2 Replies
View Related
Oct 10, 2012
My hard drive crashed. Bought a new one. Cloned another hard drive onto it. Old computer won't recognize the cloned drive but does in BIOS. I think the CPU was destroyed while cleaning the dust because it has prongs that clamped down and I couldn't see exactly where the gold pins were going to set in. Was very careful, but either the CPU is bad or the mother board is bad. Tested all other components in the working computer. Battery is fine. New cloned hard drive is fine. So I installed the cloned drive as a second OS drive in the working computer.I now have to share the computer with my husband until I get a new CPU or MB for my better, more expensive computer.Is it possible for him to log into "his" computer using "his" 1TB Sata HD, and then for me to come along and log into the cloned drive in his computer (2TB Sata HD) and do all of my work from that drive, so that when my own computer gets fixed, I'll have all the files I've worked on and programs installed that only I need on it and ready for use in my own computer, taking it out of my husband's computer after mine is fixed?
I'm sure I can go into BIOS and change the boot order whenever either one of us sits down to use the computer, but he's not going to want to do that each time, being pretty much computer illiterate as he is. Is there some other way to do a user switch easily during any time of the day when we need to share his computer?.
View 12 Replies
View Related
Dec 6, 2011
I have a M2010 running Windows 7 ultimate using raid. I was wondering if I put in a hd in the secondary spot if I could add XP Pro and dual boot. I have some things that work better under XP. I put my old laptop drive in and set the bios raid to auto detect/ata. It booted to 7 and installed drive E:. I didn't change any Matrix software settings so it's a raid/non raid setup.
View 9 Replies
View Related
Mar 4, 2012
I currently have Windows 7 installed on two separate drives in my box. I can only set (select) boot sequence in the BIOS. If I recall correctly, way back when a boot selection menu would appear when I think I was running Windows 7 (when it first came out) alongside XP but that screen no longer appears with my current setup. Is there a way to get that screen back, or an alternate way to select the OS of choice without the hassle?
View 9 Replies
View Related
May 19, 2012
I have searched around here for my problem and can't find a solution to my problem.I have two SATA HDD's plugged into my computer, one of them has the operating system on it and the other one has my old XP installation and loads of others, although might have been formatted.When I tried removing the old XP one the computer does not boot up after bios, with the error along the lines of,"Can not find the boot device, please insert.
View 1 Replies
View Related
Jun 7, 2011
I know at this point it's tricky and i should have done it before installing Windows 7 however...My new physical primary drive now has Windows 7 pro running exclusively the whole partition (cI'd like to add the drive that had XP pro running on the same PC.i'd like to get this running as a duel boot without corrupting the XP drive.
View 6 Replies
View Related
Jan 8, 2012
I have RAID 0 on two hardrives booting up 64 bit Win 7 running as SATA 0 and SATA 1.I have a third drive on SATA 2 from my previous Dell XPS which booted 32 bit Windows XP. How can I set up the system to give me a choice of either system?lthough Win 7 64 bit is faster, many of the 32 bit XP software programs will not run very well on Win 7 and in addition Win 7 doesn't allow the setting of of shortcuts the way XP does which means that Win 7 inevitably requires two key strokes to XP's one stroke.
View 1 Replies
View Related
Mar 3, 2011
I have separate ide drives one is installed with XP Pro and the other with windows 7. I want to have the choice of either os when the pc boots i.e. choose the drive to boot the pc.
View 2 Replies
View Related
Jun 24, 2012
i have two hard drives:A 250gb and a 1TBWhen I installed windows I chose the 1TB, but just left my other in there as it had some files I wanted on it. Now when I try to remove the 250gb drive, windows will not boot up.I tried marking the 250gb drive as inactive, but then during boot up it would say bootmgr is missing, so i had to use the installation disk then mark as active again.
View 3 Replies
View Related
Dec 13, 2010
I have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
View 5 Replies
View Related
Mar 5, 2011
Currently running Win7(64-bit) in RAID-0 on 2 WD Caviar Black's.I just purchased a SSD drive.What I want to do is load Win7 on the SSD and use that as my main drive, while also keeping my RAID drives boot-able and in tact as they are now. (Thus, a dual-boot Win7 setup)Will the BIOS allow me to select which drive to boot from upon start-up? My mobo is an ASUS Rampage II Extreme.
View 6 Replies
View Related
Jan 10, 2012
Wen i leave my computer on all night to do like a virus scan or just leave it my computer automatically restarts to boot from cd and i have automatic restart on system failure turned off
View 1 Replies
View Related
Jan 25, 2010
I've been using Windows 7 x64 Enterprise since somewhere in september (legally, yes), and it has ran perfectly until now (well, it still does, but...). I left the computer on for 6-7 hours while I visited my grandparents, and when I came back, I used it as always and then had to reboot it. When led to this:
When I boot up the computer it will automatically boot from the CD drive. Every single time I boot I have to press F12 and choose my harddrive. It does not save. I've been into BIOS as well, and it says that it is my harddrive that is the primary boot device. It does this every single time I turn it on.
I have no discs inside the DVD drive neither.
View 1 Replies
View Related
Jul 17, 2012
I am running Windows 7 Ultimate on a Dell Inspiron 1545. I have had this laptop approximately 3.5 years and have never had a problem until we returned from vacation a few weeks ago. I shut down my perfectly working computer and came back to beeping and auto-scroll. I have run virus scanners, registry cleaners, driver scanners, and pc cleaners and have yet to fix this problem. There is no pattern to the beeping, It will beep anywhere from 2-5 times at the Dell logo screen and then continually for approximately 100+ beeps at the Windows start screen before booting normally. My screen auto scrolls in all browsers as well as my email. I use Chrome and Thunderbird
View 14 Replies
View Related
Jul 14, 2012
I recently replaced my boot drive and just got everythign up and running. I had removed my backup drive while I replaced the boot drive so that I could us it on another computer.
Now when I add the 2nd hard drive back to my computer I get a message saying something like "can not load os" right after the bios screen comes up and before Windows begins to load. If I unplug the second drive the computer will boot just fine.
If I access the boot menu and select my boot drive the computer will boot and my second drive will work just fine. I do not have to enter the boot menu and select the boot drive on every startup?
View 1 Replies
View Related
Jul 29, 2012
I'm trying to use my computer as a wake-up alarm. I typically have my USB headset as my default audio device, but I also have speakers plugged in and turned on. When my computer boots up in the morning, I would like to have a script that changes the default audio device to the speakers for a certain amount of time, then changes the audio device back.
View 3 Replies
View Related
Sep 21, 2012
After a power outage, my windows 7 will not boot without going into safe mode.How can I restore my system to boot automatically without going into safe mode.
View 1 Replies
View Related
May 10, 2011
I have this very weird problem in which the 'Notification Area Icons' Window automatically pops up right after Windows Boots. Usually it shows after a minute or so after windows boots. Even if i keep my computer idle it shows up automatically (but only following a boot). This is irritating me quite a lot
I tried re - installing Windows but still the problem persists. I have a IBM Thinkpad T510 loaded with Windows 7 professional 32 bit. I googled this qute a lot but could not find a fix.
View 2 Replies
View Related
Dec 3, 2011
I've got Win7 home premium x64. When I boot it says near the clock can't reconnect or can't connect to all network drives. I don't have any nor have I ever.
View 9 Replies
View Related
Aug 28, 2010
Here's my situation: I use 32-bit Windows 7, however, once per month I need to use 64-bit Windows 7. So I would like to install 64-bit Windows 7 to another drive. However, I don't want to see the dual boot menu on every restart. I only want to temporarily switch to 64-bit by pressing F8 (or whatever) to change booting device at bootup.
What's the proper way to do this?
Many years ago I used to have a situation where I had WinXP on one drive and WinXP on other drive. I could switch my C: (with WinXP) at bootup. It worked, except there was a problem: In some situations C:Windows and D:Windows or Programs Files were getting mixed up, automatically Start Menu pointed suddenly to D:Program Filessomething without asking me. I had used a clone software to clone the drive so that might be the reason why they mixed up together. Eventually removing the other drive might've crippled the system even my intention was to have two separate operating systems, just in one computer.
Basically I would like to have two C: drives with Windows 7-32bit and Windows 7-64bit. So in case one drive breaks, I'll have a very quick backup system ready.
Is it a stupid idea to disconnect the current C: drive and then install the new Windows to C: and then put the first drive in as well? Then I wouldn't have the dual boot menu, which might be what I want.
Is it possible to hide the dual boot menu, have it load 32-bit as default but still have a possibility to bring up the dual boot menu by pressing some key at bootup? In that case, is it possible to remove either drive and still boot up without problems?
View 9 Replies
View Related
Jul 14, 2009
hp providian has two 512meg hdd's I have vista 32bit installed on one hdd
Would like to install windows 7 64 bit on the other hdd as a dual boot.
Never done dual boot before. there are some programs on the second hdd it
only has one partition. Can I just install it on that drive as is and still have the
programs remain,or do I have to split the drive into 2 partitions?
View 9 Replies
View Related
Aug 20, 2009
i want to boot windows7 from my harddisk which i am using .
i mean to say that not from external hard disk drive.
i will try to explain again, actually i have a pc on which i am working at this time (internal or primary harddisk drive of it ). i want to reboot my system and when its bootsup then it should be stating setup of Windows 7 from one of my harddisk drive. for example from d: drive (D:/Windows 7)
and also want to fromat my c drive.
View 9 Replies
View Related
