Using X64, SCSI Driver Only Supports X86
Jan 15, 2009
I am trying to install drivers for an Adaptec AHA-2940 SCSI card.
The adaptec website there is no 64 bit version available, but i have been reading around for solutions with no success.
I need the "Adaptec AIC-7870 PCI SCSI Controller" ... but there is no 64 bit version for that. When i try to install the drivers (there is no installer program, i just need to use the update drivers feature of windows) it says that it is not a 64 bit version so i can't use it.
Is there any solution to my problem?
View 4 Replies
ADVERTISEMENT
Dec 25, 2012
Having gone through all the setting up processes, my system will not produce Minidump Files, an SCSI miniport is mentioned as part of the production process, yet I have searched my system and cannot find one.
View 2 Replies
View Related
Sep 13, 2009
Anyone have working driver for this scsi card, i like this, and this can working good for my Umax 1220s flatbed scanner
View 0 Replies
View Related
Aug 28, 2012
Can W/7 install to a SCSI drive without the driver installation (F6)? I'm just about to install W7, and it seems to detect all 3 SCSI drives without the driver for the LSI 1030 Ultra SCSI adapter.
I'm just a little surprised how simple this is, usually you have to supply the additional driver...
View 2 Replies
View Related
Sep 4, 2012
How do i find out if my laptop supports wddm driver? i have windows 7 32 bit
View 2 Replies
View Related
Nov 6, 2009
Prior to purchasing a Vista Ultimate to Windows 7 Ultimate upgrade for $220, I downloaded and ran the compatibility/upgrade adviser program and found no problems.While running the Windows 7 Install disk, the installation stopped dead with the message that I must update the driver for my Adaptec 29160N SCSI hard disk storage controller. However it could not find a newer driver than the one I am currently using under Vista, version 6.5.645.100, dated 1/31/2007.
View 4 Replies
View Related
Nov 5, 2009
I have a couple of old SCSI slide scanners and SCSI cards I use in (real) 32-bit XP, that no 64 bit drivers exist for. So I haven't been able to get them to work in Windows 7.
Is there any hope of getting them to work via Windows XP Mode in Windows 7? My impression scanning posts here is that this won't work, as I need real XP to talk to real SCSI cards with real drivers, and the virtual/emulated environment won't acommodate this.
I picked up a VT capable processor, hoping to try all this out, but now I find my Windows 7 RC eval setup can't load the RTM Windows XP Mode and Virtual PC software, so I'm unable to test it out. No way I'm springing for Windows 7 Pro only to find out the virtualization capability won't do what I need it to do.
Will I have to continue to dual-boot into XP when I want to work with the old hardware? If so, I'll just get the Windows 7 Home family pack, and forget about VT..
View 3 Replies
View Related
Dec 11, 2012
I have Asus M/B P5KPL-VM which supports 3gb ram, but only allows 2gb while I have 4gb installed. Would I have to update my Bios, since it is original from 2008?
View 8 Replies
View Related
Jul 22, 2010
I have a Dell XPS730 with the Nvidia Nforce 790i chipset. I run two 500 gig SATA drives under RAID 0. I recently installed an Intel X25 80 gig SSD and have ran into problems. Windows recognizes the drive as SCSI in device manager. Granted it works however because it is listed as SCSI TRIM and the intel toolbox wont work which makes an SSD useless.After tons of research I have found that because of the Nvidia chipset it makes the drive show up as SCSI. I have tried Vista and Windows 7, both show it as SCSI. I have moved the SATA cable away from the other main 4 that support RAID with no luck. I have refomatted several times as well with no luck. I have completely disabled RAID in the bios and it STILL shows as SCSI. Is there any way to get around this? I have read that changing the nvidia controller drivers may work but im not sure what I would switch them to?
View 9 Replies
View Related
May 30, 2010
How to load Windows 7 on scsi raid systems? the drives aint recognise i had to load sata drivers for my portege laptop m400 what drivers do i need? raid or scsi from dell? poweredge 1800/2800
View 6 Replies
View Related
May 15, 2009
I am trying to install Windows 7 on my test machine. However, I can't get it to detect any drives - three are 3 disks in the system - it is an IDE disk. When I try and install, it can't detect any disks, but when I try and install through Windows Vista, it detects them.
However, then it says it needs the driver for the LSI Logic 22910, 21002 PCI SCSI adapter; 53C896 Device. Is there still a version of this, and if so, where can I get it? I have tried everywhere I can think of, including the LSI website!
View 6 Replies
View Related
Nov 9, 2009
To make long story short, I need to buy this old ATI Radeon 7000 but I want to make sure that this card is supported by windows 7.
I search for official driver from AMD but seems they no longer support it but I found the driver for windows 7 on the net. ATI Radeon 7000 drivers. Can someone please confirm it works with Windows 7?
View 1 Replies
View Related
May 27, 2011
Does CPU i3 550 supports RAM 1600 MHz speed?
View 4 Replies
View Related
Jul 14, 2010
i have dell inspiron 1464 laptop that has a core i3 processor i want to install XP with sp2 but i have no driver
View 6 Replies
View Related
Jan 17, 2012
I've been reading about issues with people having problems with their SSD's not being reconized by Windows 7 Ultimate.but my WD 600gig STAT III Raptor is listed as a SCSI as well. I assume the problem is with my Marvell Driver.I bought this 60gig OCZ Vertex 3 SATA III drive for a Boot drive and had a pain installing drivers for it on a clean install of windows. I plugged it, and my WD Raptor both into the 2 SATA III ports that I have on my ASUS Rampage III MB. I set the Drives to ACHI not IDE. Tried to install Windows, had to force windows to accept the Marvell Drivers...but finally got it installed.Now Im stuck with the OCZ SSD and the Raptor both at SCSI speeds...not able to get them reconized my Windows 7 Ult as SATA drives.Should I try uninstalling the Marvell and JBMicron drivers and let Windows try and install drivers that will work? Funny thing is, I know that windows is reconizing the SSD as a SSD because of the Disk Defrag has been disabled on it...and was able to get some info off the drive via Intels SSD toolbox....OCZ's tool box wont reconize it unless you use Windows drivers. I had to install the Marvell Drivers to install Windows, Windows wouldn't reconize either drive plugged into the SATA III ports.I've tried bout everything, even tried the reg. fix via the Windows Helper with no luck.
View 1 Replies
View Related
Apr 19, 2009
I have a lsi megaraid 1600 elite scsi card which is not being dected by windows 7 64bit. I have tried several drivers packages for server 2003 and 2008 but it doesnt work. Lsi does not list visa drivers for this card on thier site. Does anyone have any suggestions.
View 6 Replies
View Related
Aug 15, 2009
Just installed Windows 7 RTM and my Sata HDD's and DVDRW are reporting as SCSI devices. I would get this problem in XP if I installed the mobo's raid drivers by accident. If I did then the devices would report as SCSI and the dvd burner would report as a cdrom and would not burn or read dvds
Whereas in Windows 7 the burner is reporting as a DVDRW scsi CDrom and will play dvd's and burn them too.
So at the moment there doesn't seem to be any problem however whilst navigating through the control panel I noticed the WEI. So I took a look and it's report my primary hard drive with a score of 5.9. The hard drive is a brand new Western Digital Caviar Black 500gb 32mb cache disk, is this score normal for such a drive?
Also is there anything else to worry about with the devices reporting as SCSI or is okay to leave it like that.
View 3 Replies
View Related
Dec 18, 2012
How can I uninstall a Gigabyte raid contoller without crashing my Win 7 OS? Uninstall is being prevented because "the OS is on the contoller"! Win 7 64 bit is on a Crucial SSD boot drive and AHCI is set in BIOS. However the raid controller is setting all internal drives to SCSI!
View 1 Replies
View Related
Dec 23, 2009
I have recently bought a HDTV from Philips 32" and it is announced as 1080p.
Now, when i tried connecting it to my computer, it says that 1366x768 is the native resolution, and not 1920x1080. I have even tried creating a custom resolution as 1080p to see if it works , but no luck.
So, how do i get this TV to work on 1080p?
Or better, how do i check to see if it really is 1080p?
View 9 Replies
View Related
Jul 7, 2012
chipsets supported by the motherboard.My CPU is Celeron 450.Here it shows the CPU is supported by the motherboard: ASRock > Products > P5B-DE.(If you click on "overview and specifications" it shows how the chipset supported is P965)
View 5 Replies
View Related
May 4, 2009
I have a old creative Live value sound card which only worked in XP the vista drivers were never released, so can I connect that card & install the XP drivers in XP mode & make the card usable under windows 7 XP mode? That Card does not have windows 7 drivers either.
View 2 Replies
View Related
Jun 27, 2011
I am using 'p5e vm hdmi auss motherboard. Does this motherboard supports Intel i7 duo core processor or not.
View 2 Replies
View Related
Nov 10, 2011
what program supports blueray movies? because i have an external blue ray player
View 2 Replies
View Related
Jun 30, 2012
i have some problem with pinnacle studio 9.4.3 which has to be installed in windows 7 64 bit version
View 1 Replies
View Related
Dec 25, 2012
I have a very strange problem,my graphic card supports directx 11.but in dxdiag,in display tab it showing ddi version 10.1.i done all things update directx(already latest version),update graphic card(latest 9.17.10.2875) intel HD Graphics.i searched on many forums,many people have this problem on different hardware & operating system also.i also apply microsoft hotfix which is directx wrongly displaying ddi version 10.1.
View 9 Replies
View Related
Jan 21, 2012
can I install Oracle software in windows 7 and i3 processor?I tried once but failed.
View 2 Replies
View Related
Nov 6, 2009
Kaspersky Internet Security 2009 it's a support for Windows 7 Ultimate?
View 2 Replies
View Related
Sep 29, 2012
on the website it says that is supports dual channel ram and upto 32gb of it, will it work with a motherboard with 4 ram slots
View 3 Replies
View Related
Apr 6, 2012
why dell gx270 is not giving proper resolution on window7 however i have installed drivers?
View 2 Replies
View Related
Sep 24, 2012
does dual-core amd opteron(tm) processor 2212 support operating system windows 7
View 4 Replies
View Related
May 18, 2012
Having issues with RAID0 array being detected by Windows7 Ultimate x64 as SCSI. Apparently these drivers are the 'default' drivers that install when the RAID array is initialized. There is no option at this point to install other drivers instead.Using DeviceManager, there is an option to 'update drivers', and regardless of the method chosen, even selecting the file for a previously-downloaded set of drivers, Windows7 always comes back with a message of "Windows has determined that the best drivers for your system are already installed". Considering that SCSI drivers are the OLDEST ones out there, and actual SCSI devices are becoming rarer and rarer, how is it that these drivers cannot be replaced with more current and more applicable drivers?
View 5 Replies
View Related
