I have recently bought a HDTV from Philips 32" and it is announced as 1080p.
Now, when i tried connecting it to my computer, it says that 1366x768 is the native resolution, and not 1920x1080. I have even tried creating a custom resolution as 1080p to see if it works , but no luck.
So, how do i get this TV to work on 1080p?
Or better, how do i check to see if it really is 1080p?
I have a Dell 1525 with the intel 965 chipset graphics. I had XP and Vista 32bit installed previously and the graphics drivers would have an extra option to change the horizontal and vertical position of the screen. But now with Seven x64 and the drivers downloaded from Update, I can't seem to fix the problem.
Whenever I have a program maximized on my hdtv a few pixels width wise will be off screen. Just enough to have the menu bars and scroll bars off screen. Are there any third party programs to fix this? I tried installing x64 Vista drivers and they would invert and wash out the colors on my screen, totally unusable.
So far, I've spotted:Logitech HD Webcam C910 (�45) Microsoft LifeCam Studio (�49) FaceVsion TouchCam N1 (�60) Any thoughts/opinions on them?
View 1 Replies View RelatedI've been using 7MC for a few months at least without many problems, but just after upgrading to 7600 the resolution has started acting up.
Say for instance - I come home from work and turn on the TV (the HTPC is always on) and the resolution will be stretched strangely. The TV will show 1080i as the input (it's a 720p TV).
If I then turn off the TV then turn it back on 30 seconds later it will revert back to 720p and the aspect ratio will be normal.
The TV is connected via HDMI to an nVidia card. I have rebooted the PC a couple of times but that hasn't helped. Windows Update is not showing any updates to the display hardware.
Any ideas?
My 720p movies plays not perfectly in any player. Is my system is slow for 720p movies? My system's specs are in my CP.
View 9 Replies View RelatedI have an old desktop I'm thinking about turning into an HTPC. I currently have an Nvidia Geforce 8800GT videocard, which says it supports 1080P: PNY
I'm trying to determine what is the best way to hook it up to my HDTV, which has both VGA and HDMI ports. Should I get a DVI --> HDMI Adapter for best resolution / clarity?
Or is hooking it up via VGA fine, even though I doubt I will get full 1080P performance.
I recently bought an ASUS laptop with this configuration: AMD Brazos Dual Core E350, 2GB ram memory which 1.6GB are usable and I guess that the rest it's for video and AMD Radeon HD 6310M graphic card, but i can't play 1080p movies. I have read some reviews and it says that can play smoothly 1080p movies...and i wonder why this isn't work.
View 6 Replies View Relatedlately I have this problem with full HD movies.When I watch them it has these intermittent stops and pixalations specialy if the frame has lots of details and light.I use VLC player 2.1, freshly installed , I have ati radeon hd 4500 with 512ram.Maybe I should mention that I never had this problem before.
View 5 Replies View RelatedI am planning to add some 1080p MKV files to a DVD+RW. I know I will probably have to convert them to a different format so that players can read them, but what format would you recommend I use and how should I go about it? Also I am wondering about the quality loss. To my understanding there will be a loss in quality, but will it be that significant? I want the video to look good, but I would like to use DVDs because I don't think my computer (Dell Inspiron N7110) can write to Blu-ray discs. And since that's the only way to put the files onto a Blu-ray (without buying a recorder for it) I am planning on using DVD+RW discs.
View 5 Replies View RelatedI have Asus M/B P5KPL-VM which supports 3gb ram, but only allows 2gb while I have 4gb installed. Would I have to update my Bios, since it is original from 2008?
View 8 Replies View RelatedI have my comp with i7 950 and 58s0 board with XFX 5770 card. When my comp is connected to my 32inch Full HD tv at 720p resolution there is no problem but when i change the resolution to 1080p there is severe flickering and rgb colors on screen. I have the latest drivers installed in my system ie Catalyst Control Center 11.11
View 1 Replies View Relatedmy laptop has an ati x1600 mobility card and is outputting via hdmi (mini dvi-actually) to an ASUS VH242H (full 1080p) monitor. When I had this connected running xp I had not problem with the screen resolution and size, but now that I'm running windows 7 the 1920x1080 resolution is available, but the picture doesn't fill the whole screen, there is like a 1" black box around the displayed screen.
I believe it has something to do with my display driver, I'm currently using the one provided by windows update.
I recently upgraded my laptop's display to a 1080p high definition part from hp. I would like to buy a decal (like the Windows 7 or i7 ones) to put on the outside of my laptop to show off the technology. The only one I can find is on ebay. But its from Germany. Full HD 1080 Sticker 15 x 19mm [458] | eBay?
View 7 Replies View RelatedIt's been some time that I've been experiencing micro-lags during the playback of 720/1080p mkv movies (not all of them). It can be best noticed in the parts of the movie when there's a lot of movement. If I stop the movie and play this part again, the lag is still there. It's not the file's fault because there are movies that I used to watch without any problems some time ago (the same file).
CPU: i7 920 2.6 @stock speed
GPU: HD6950 @ stock speed
RAM: 4GB DDR3 1333 (It used to be 6GB but one module broke)
K-Lite Mega Codec Pack + MPC
I just picked up a new graphics card HD6750 for my HTPC. I am then connecting the HTPC via HDMI to an 1080p LED TV. How do I ensure that I am sending an 1080p signal to my TV? My TV manual states that the tv supports: 1080P 1920 x 1080P. So I know the TV can handle it. Do I simply set the Display settings to 1080P 1920?
View 1 Replies View RelatedI run 7 Home Premium, 64bit on a Toshiba Satellite L505. My chipset is from the Mobile Intel(R) 4 Series family. When I try to play 1080p or even 720p videos (doesn't matter if it's VLC or MPC, or whatever) my screen blacks for a second and then comes back with the 'display driver stopped responding and has recovered' message. Then the VLC window is green, and I can't play the video.
I've uninstalled and re-installed the Intel drivers from the Toshiba website many, many times, and nothing has worked to solve this problem. I already clean boot, so there aren't any conflicting programs that cause this. HOWEVER, I have noticed that if I start up my computer, then restart from the start menu, I am able to play the videos without a hitch. Then, if I completely shut down and turn it on again, the issue re-surfaces.
I am trying to install drivers for an Adaptec AHA-2940 SCSI card.
The adaptec website there is no 64 bit version available, but i have been reading around for solutions with no success.
I need the "Adaptec AIC-7870 PCI SCSI Controller" ... but there is no 64 bit version for that. When i try to install the drivers (there is no installer program, i just need to use the update drivers feature of windows) it says that it is not a 64 bit version so i can't use it.
Is there any solution to my problem?
To make long story short, I need to buy this old ATI Radeon 7000 but I want to make sure that this card is supported by windows 7.
I search for official driver from AMD but seems they no longer support it but I found the driver for windows 7 on the net. ATI Radeon 7000 drivers. Can someone please confirm it works with Windows 7?
Does CPU i3 550 supports RAM 1600 MHz speed?
View 4 Replies View Relatedi have dell inspiron 1464 laptop that has a core i3 processor i want to install XP with sp2 but i have no driver
View 6 Replies View RelatedSo I was using my laptop over on a friends LG 47" TV and when I plugged it into my SVideo output on my Toshiba laptop with the Intel 965 Video card, the screen started to flash as it was trying to recognize the tv. I would get popups of the Video Driver was saved from a crash, but the screen would keep on flashing when it would go to a BSOD. I tried it twice and it ended the same way. I've used this before with my own normal tvs at home and it would work fine. Has anyone else run into a similar problem?
View 2 Replies View RelatedI'm looking to stream some of my Bluray rips from my Media Center server to my 360. I just recently got a 1080p TV (kinda late I know) and was just doing rips at 720p in .mkv and then converting them using mkv2vob to .m2ts using what I assume is an mpeg2 codec. I've noticed if I do the same with 1080p movies it stutters and the sound cuts out here and there. I havent tried yet, but I read that using x264 as the codec and .mp4 as the containter (please forgive me I'm using the wrong terminology, I really dont know a ton about this). Would that give me better performance? Or could someone suggest a way to make 1080p while still keeping good quality 5.1 audio stream perfectly?
Heres my "server's" specs and network if it helps:
AMD 9600 Quad Core
4gb RAM
10/100 LAN (no gigabit)
GeForce 8600GT graphics card
Netgear 16 port 10/100 switch, both the 360 and the server are on it. It might be important to note that the server could be recording one or two shows at once while I'm watching the movie.
chipsets supported by the motherboard.My CPU is Celeron 450.Here it shows the CPU is supported by the motherboard: ASRock > Products > P5B-DE.(If you click on "overview and specifications" it shows how the chipset supported is P965)
View 5 Replies View RelatedI have a old creative Live value sound card which only worked in XP the vista drivers were never released, so can I connect that card & install the XP drivers in XP mode & make the card usable under windows 7 XP mode? That Card does not have windows 7 drivers either.
View 2 Replies View RelatedI am using 'p5e vm hdmi auss motherboard. Does this motherboard supports Intel i7 duo core processor or not.
View 2 Replies View Relatedwhat program supports blueray movies? because i have an external blue ray player
View 2 Replies View Relatedi have some problem with pinnacle studio 9.4.3 which has to be installed in windows 7 64 bit version
View 1 Replies View RelatedHow do i find out if my laptop supports wddm driver? i have windows 7 32 bit
View 2 Replies View RelatedI have a very strange problem,my graphic card supports directx 11.but in dxdiag,in display tab it showing ddi version 10.1.i done all things update directx(already latest version),update graphic card(latest 9.17.10.2875) intel HD Graphics.i searched on many forums,many people have this problem on different hardware & operating system also.i also apply microsoft hotfix which is directx wrongly displaying ddi version 10.1.
View 9 Replies View Relatedcan I install Oracle software in windows 7 and i3 processor?I tried once but failed.
View 2 Replies View RelatedKaspersky Internet Security 2009 it's a support for Windows 7 Ultimate?
View 2 Replies View Related