[SCSI] Initio-940 (IOI-4203U) Driver
Sep 13, 2009Anyone have working driver for this scsi card, i like this, and this can working good for my Umax 1220s flatbed scanner
View 0 RepliesAnyone have working driver for this scsi card, i like this, and this can working good for my Umax 1220s flatbed scanner
View 0 RepliesI am trying to install drivers for an Adaptec AHA-2940 SCSI card.
The adaptec website there is no 64 bit version available, but i have been reading around for solutions with no success.
I need the "Adaptec AIC-7870 PCI SCSI Controller" ... but there is no 64 bit version for that. When i try to install the drivers (there is no installer program, i just need to use the update drivers feature of windows) it says that it is not a 64 bit version so i can't use it.
Is there any solution to my problem?
Having gone through all the setting up processes, my system will not produce Minidump Files, an SCSI miniport is mentioned as part of the production process, yet I have searched my system and cannot find one.
View 2 Replies View RelatedCan W/7 install to a SCSI drive without the driver installation (F6)? I'm just about to install W7, and it seems to detect all 3 SCSI drives without the driver for the LSI 1030 Ultra SCSI adapter.
I'm just a little surprised how simple this is, usually you have to supply the additional driver...
Prior to purchasing a Vista Ultimate to Windows 7 Ultimate upgrade for $220, I downloaded and ran the compatibility/upgrade adviser program and found no problems.While running the Windows 7 Install disk, the installation stopped dead with the message that I must update the driver for my Adaptec 29160N SCSI hard disk storage controller. However it could not find a newer driver than the one I am currently using under Vista, version 6.5.645.100, dated 1/31/2007.
View 4 Replies View RelatedI have a couple of old SCSI slide scanners and SCSI cards I use in (real) 32-bit XP, that no 64 bit drivers exist for. So I haven't been able to get them to work in Windows 7.
Is there any hope of getting them to work via Windows XP Mode in Windows 7? My impression scanning posts here is that this won't work, as I need real XP to talk to real SCSI cards with real drivers, and the virtual/emulated environment won't acommodate this.
I picked up a VT capable processor, hoping to try all this out, but now I find my Windows 7 RC eval setup can't load the RTM Windows XP Mode and Virtual PC software, so I'm unable to test it out. No way I'm springing for Windows 7 Pro only to find out the virtualization capability won't do what I need it to do.
Will I have to continue to dual-boot into XP when I want to work with the old hardware? If so, I'll just get the Windows 7 Home family pack, and forget about VT..
I have a Dell XPS730 with the Nvidia Nforce 790i chipset. I run two 500 gig SATA drives under RAID 0. I recently installed an Intel X25 80 gig SSD and have ran into problems. Windows recognizes the drive as SCSI in device manager. Granted it works however because it is listed as SCSI TRIM and the intel toolbox wont work which makes an SSD useless.After tons of research I have found that because of the Nvidia chipset it makes the drive show up as SCSI. I have tried Vista and Windows 7, both show it as SCSI. I have moved the SATA cable away from the other main 4 that support RAID with no luck. I have refomatted several times as well with no luck. I have completely disabled RAID in the bios and it STILL shows as SCSI. Is there any way to get around this? I have read that changing the nvidia controller drivers may work but im not sure what I would switch them to?
View 9 Replies View RelatedHow to load Windows 7 on scsi raid systems? the drives aint recognise i had to load sata drivers for my portege laptop m400 what drivers do i need? raid or scsi from dell? poweredge 1800/2800
View 6 Replies View RelatedI am trying to install Windows 7 on my test machine. However, I can't get it to detect any drives - three are 3 disks in the system - it is an IDE disk. When I try and install, it can't detect any disks, but when I try and install through Windows Vista, it detects them.
However, then it says it needs the driver for the LSI Logic 22910, 21002 PCI SCSI adapter; 53C896 Device. Is there still a version of this, and if so, where can I get it? I have tried everywhere I can think of, including the LSI website!
I've been reading about issues with people having problems with their SSD's not being reconized by Windows 7 Ultimate.but my WD 600gig STAT III Raptor is listed as a SCSI as well. I assume the problem is with my Marvell Driver.I bought this 60gig OCZ Vertex 3 SATA III drive for a Boot drive and had a pain installing drivers for it on a clean install of windows. I plugged it, and my WD Raptor both into the 2 SATA III ports that I have on my ASUS Rampage III MB. I set the Drives to ACHI not IDE. Tried to install Windows, had to force windows to accept the Marvell Drivers...but finally got it installed.Now Im stuck with the OCZ SSD and the Raptor both at SCSI speeds...not able to get them reconized my Windows 7 Ult as SATA drives.Should I try uninstalling the Marvell and JBMicron drivers and let Windows try and install drivers that will work? Funny thing is, I know that windows is reconizing the SSD as a SSD because of the Disk Defrag has been disabled on it...and was able to get some info off the drive via Intels SSD toolbox....OCZ's tool box wont reconize it unless you use Windows drivers. I had to install the Marvell Drivers to install Windows, Windows wouldn't reconize either drive plugged into the SATA III ports.I've tried bout everything, even tried the reg. fix via the Windows Helper with no luck.
View 1 Replies View RelatedI have a lsi megaraid 1600 elite scsi card which is not being dected by windows 7 64bit. I have tried several drivers packages for server 2003 and 2008 but it doesnt work. Lsi does not list visa drivers for this card on thier site. Does anyone have any suggestions.
View 6 Replies View RelatedJust installed Windows 7 RTM and my Sata HDD's and DVDRW are reporting as SCSI devices. I would get this problem in XP if I installed the mobo's raid drivers by accident. If I did then the devices would report as SCSI and the dvd burner would report as a cdrom and would not burn or read dvds
Whereas in Windows 7 the burner is reporting as a DVDRW scsi CDrom and will play dvd's and burn them too.
So at the moment there doesn't seem to be any problem however whilst navigating through the control panel I noticed the WEI. So I took a look and it's report my primary hard drive with a score of 5.9. The hard drive is a brand new Western Digital Caviar Black 500gb 32mb cache disk, is this score normal for such a drive?
Also is there anything else to worry about with the devices reporting as SCSI or is okay to leave it like that.
How can I uninstall a Gigabyte raid contoller without crashing my Win 7 OS? Uninstall is being prevented because "the OS is on the contoller"! Win 7 64 bit is on a Crucial SSD boot drive and AHCI is set in BIOS. However the raid controller is setting all internal drives to SCSI!
View 1 Replies View RelatedHaving issues with RAID0 array being detected by Windows7 Ultimate x64 as SCSI. Apparently these drivers are the 'default' drivers that install when the RAID array is initialized. There is no option at this point to install other drivers instead.Using DeviceManager, there is an option to 'update drivers', and regardless of the method chosen, even selecting the file for a previously-downloaded set of drivers, Windows7 always comes back with a message of "Windows has determined that the best drivers for your system are already installed". Considering that SCSI drivers are the OLDEST ones out there, and actual SCSI devices are becoming rarer and rarer, how is it that these drivers cannot be replaced with more current and more applicable drivers?
View 5 Replies View RelatedOkay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were "check if your hd is listen in bios".So, i IS listed in bios but I can't reinstall windows nor access it
View 1 Replies View Relatedi changed the OS of my laptop from windows7 starter to windows ultimate x64. but i cant connect my laptop to the internet. some drivers are missing. {2 BASE SYSTEM DEVICE DRIVER missing, ETHERNET CONTROLLER DRIVER missing, NETWORK CONTROLLER and VIDEO CONTROLLER DRIVER is also missing.} solve this?i tried to install the ethermet driver i downloaded. but it always shows this error " error:failed to install, no device driver is present to your computer"
View 1 Replies View RelatedI have an Acer Aspire 7741z-4433 with an Intel(R) Pentium(R) p6200 (2.13 GHz, 3MB 1.3 cache). This only happens to me while I am playing The Sims 3. I have the game set on the lowest quality settings, even though my laptop "claims" to be HD LED, etc. This issue still happens. As you may know I cannot replace the graphics card as it is apart of the motherboard, and to buy a new motherboard with a better graphics card would cost more than a new computer. I have been the my manufacture's website and tried installing an update of the graphics card, and that didn't do the trick either. I am at my wits end, and I just want to play the game without it shutting down and freezing my computer. The reason I know the error is because I do Alt + Tab to get back to the desktop. The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse, and then it blinks a couple times and then freezes completely?
View 1 Replies View Relatedi have a problem finding lexmark z715 printer driver to download in my window 7 dell computer.
View 3 Replies View RelatedFree Download Driver Sony Vaio Brightness Driver For Window?
View 1 Replies View Relatedi want toshiba satellite a300 blutooth driver
View 3 Replies View Relatedemachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
View 1 Replies View RelatedI have a brand new Dell XPS8500 running Windows 7 Ultimate x64. When trying to play online games, I keep getting this message:Display driver AMD driver stopped responding and has successfully recovered.The browser (Chrome) freezes up, the screen goes black, the error message pops up, the browser goes completely white and I have to go into task manager and kill it.I tried getting a screen shot but could not.
Intel Core i7-3770 CPU @3.40GHz
16 GB RAM
Automatic install sound driver windows 7 driver in computer?
View 1 Replies View Relatedtrying to install Windows 7 .iso disk image on my macpro Lion.....for using VMware Fusion 4 on my Mac.
View 1 Replies View Relateddownload DELL motherboard driver for sound ,audio vga driver?
View 1 Replies View RelatedDell driver inspiron 1525 windows 7 graphics driver
View 1 Replies View RelatedI just downloaded the Vista driver for my Nvidia 8500GT , and during install, Nvidia shows it as a "Windows 7 32-bit Driver"...
Did this happen now or was I sleeping all this time?
i want to download driver for acer 4736 web cam driver..
View 1 Replies View RelatedI bought a new computer wth window 7 & have been having this problem but the company I bought it is unable to fix it.
View 2 Replies View RelatedAre there any drivers available for downloan for: Iomega driver model MDHD500-U Driver P/N 31641800?
View 2 Replies View Relatedpci device isnt installed
View 1 Replies View Related