Website It Says That Is Supports Dual Channel Ram And Upto 32gb Of It?
Sep 29, 2012on the website it says that is supports dual channel ram and upto 32gb of it, will it work with a motherboard with 4 ram slots
View 3 Replieson the website it says that is supports dual channel ram and upto 32gb of it, will it work with a motherboard with 4 ram slots
View 3 Repliesrecently it came to my notice that i was running my RAM on single channel mode (2x2gb) on my dh67bl mobo. i saw it in cpu z and it showed single channel.
So, i changed my ram and placed it in identical slots and now the Cpu z shows dual channel RAM. but i don't see any visible difference in performance.
is there any performance difference in running the RAM in dual channel / single channel?
im looking at a lga 2011 x79 board. namely this one> Newegg.com - ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard but am looking at this ram> Newegg.com - G.SKILL Ripjaws Z Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL8Q-16GBZH do i absolutely need to place 8 sticks of ram in? or can i get away with staggering 4 sticks accross the board instead?
View 4 Replies View Relateddoes dual-core amd opteron(tm) processor 2212 support operating system windows 7
View 4 Replies View RelatedI may want to up the memory on my machine from 1 GB to 2 GB which is the mainboard's maximum. It is an MS-7211 from MSI. Here is the only thing the manual says about memory:
Main Memory
• Supports two memory banks using two 184-pin DDR DIMM.
• Supports up to 2GB PC3200 (DDR400) SDRAMs.
• Supports 2.5v DDR SDRAM.
I want to get dual channel ram. Can anyone tell me if they know it is guaranteed to work? Or do you need a special motherboard for dual channel?
I noticed that I was running in single channel config, so I decided to move my ram around to run in dual channel. On reboot it says its running in dual channel, but my system reboots continuosly after the loading screen. Works perfectly fine if I switch it back to single.
Do I need to edit something in BIOS to get this to work or am I better off just sticking to single channel?
I would like to upgrade my memory. I have a hp pavilion 6617c with dual channel ram. Can i use this : Patriot PSD34G13332 Signature 4GB PC10600 DDR3 Desktop Memory Upgrade - 1333MHz, 1x4096MB, CL9, Non-ECC, Unbuffered at TigerDirect? Is there any difference?
View 5 Replies View RelatedI have 320GB hard-disk out of which 144GB is free but when I try to shrink it to create a new volume, the maximum amount I can enter is somewhere around 4GB.
View 4 Replies View RelatedAs soon as I close warcraft after playing dota, the CPU Usage shoots upto a stagnant 100%. I checked percentage wise and rundll32 is using up over 60%. Whereas when the game is running, rundll32 and svchost (combind) contribute to around 80% of the total CPU Usage and the Total usage still being a stable 100%.
View 9 Replies View RelatedHow to add "favourite channel list" for channel surfing it "windows media center" (Windows 7)
View 3 Replies View RelatedI want to move from XP home to Win7 64 bit Home Premium, and get a 32 Gb SSD for my boot/main drive. Currently I only have an old 40Gb IDE HDD, as my SATA WD sadly has died; I don't need big HDD though, as I don't store much on my PC. So, I started to think of getting the Corsair X32 and installing Win7 on it, together with one game I play and a few programs like Photoshop and Sonar6 (DAW software). I would keep all my docs on the HDD. So, is 32 Gb enough?
View 18 Replies View RelatedI have 32gb of ram, paired with a 128gb ocz ssd. I've heard about disabling page file or reducing the amount. Currently I've reduced it to 512 - 2048 and regained a lot of space on my ssd, which I'm very happy about. Any suggestions or fine how I have it?
Also, should i disable write caching?
i can't format my sd card 32 G ,every time i try to do it comes ( windows can't format sd )
View 2 Replies View RelatedThis is being used on PSP (File System is FAT32, was formatted on PSP itself) and had 26% fragmentation (6'6gb size of it). After copying all stuff I wanted to it (leaving 22% space) left all this fragmentation so decided to do a normal defrag (using defragler) since its going to need only 1 time as i dont plan to delete that stuff or replace it.
What is your opinion about if I could have gained any little performance on the memory stick doing this or not? Also didn't check yet if CCleaner can delete free space on this memory stick or not (not sure if this memory sticks store data like an HDD do so). Just doing a normal defrag on this memory stick took some good hours.
Ok, I have the iTouch 3rd generation 32GB and I am about to upgrade my Hp p6130f to Windows 7.
However, I heard that Windows 7 is now compatible with new Ipod models?
Is it true?
Is it possible to load Windows 7 onto a 32GB flash drive and have it boot off there instead of an internal hard drive?
View 1 Replies View Relatedmy SD Card (32gb) works in camera but not in computer
View 2 Replies View RelatedI can download Canon pictures from a 2GB card, but cannot download from a 32GB card.I am using ZoomBrowser EX for Windows 7.What is the problem and how do I download pictures from the 32GB card?
View 3 Replies View RelatedI have Asus M/B P5KPL-VM which supports 3gb ram, but only allows 2gb while I have 4gb installed. Would I have to update my Bios, since it is original from 2008?
View 8 Replies View RelatedIm unable to format my sdhc 32gb memory card. Message says windows was unable to complete the format.
View 2 Replies View RelatedI am trying to install drivers for an Adaptec AHA-2940 SCSI card.
The adaptec website there is no 64 bit version available, but i have been reading around for solutions with no success.
I need the "Adaptec AIC-7870 PCI SCSI Controller" ... but there is no 64 bit version for that. When i try to install the drivers (there is no installer program, i just need to use the update drivers feature of windows) it says that it is not a 64 bit version so i can't use it.
Is there any solution to my problem?
To make long story short, I need to buy this old ATI Radeon 7000 but I want to make sure that this card is supported by windows 7.
I search for official driver from AMD but seems they no longer support it but I found the driver for windows 7 on the net. ATI Radeon 7000 drivers. Can someone please confirm it works with Windows 7?
Does CPU i3 550 supports RAM 1600 MHz speed?
View 4 Replies View Relatedi have dell inspiron 1464 laptop that has a core i3 processor i want to install XP with sp2 but i have no driver
View 6 Replies View RelatedI have recently bought a HDTV from Philips 32" and it is announced as 1080p.
Now, when i tried connecting it to my computer, it says that 1366x768 is the native resolution, and not 1920x1080. I have even tried creating a custom resolution as 1080p to see if it works , but no luck.
So, how do i get this TV to work on 1080p?
Or better, how do i check to see if it really is 1080p?
chipsets supported by the motherboard.My CPU is Celeron 450.Here it shows the CPU is supported by the motherboard: ASRock > Products > P5B-DE.(If you click on "overview and specifications" it shows how the chipset supported is P965)
View 5 Replies View RelatedI have a old creative Live value sound card which only worked in XP the vista drivers were never released, so can I connect that card & install the XP drivers in XP mode & make the card usable under windows 7 XP mode? That Card does not have windows 7 drivers either.
View 2 Replies View RelatedI am using 'p5e vm hdmi auss motherboard. Does this motherboard supports Intel i7 duo core processor or not.
View 2 Replies View Relatedwhat program supports blueray movies? because i have an external blue ray player
View 2 Replies View Relatedi have some problem with pinnacle studio 9.4.3 which has to be installed in windows 7 64 bit version
View 1 Replies View RelatedI'm trying to format the above listed card through my Toshiba Sattilite 660-x running windows 7 w/ an sd adapter card slot from out of my Nokia E-5 cellphone. It keeps telling me in 6 attempts that windows cannot format it. Properties on the card show it as full, but it has never had more than 16gb put on it. As this card is not even 2 months old. Is there a site that can use to format this on freeware...etc?
View 6 Replies View Related