I would like to upgrade my memory. I have a hp pavilion 6617c with dual channel ram. Can i use this : Patriot PSD34G13332 Signature 4GB PC10600 DDR3 Desktop Memory Upgrade - 1333MHz, 1x4096MB, CL9, Non-ECC, Unbuffered at TigerDirect? Is there any difference?
View 5 Repliesrecently it came to my notice that i was running my RAM on single channel mode (2x2gb) on my dh67bl mobo. i saw it in cpu z and it showed single channel.
So, i changed my ram and placed it in identical slots and now the Cpu z shows dual channel RAM. but i don't see any visible difference in performance.
is there any performance difference in running the RAM in dual channel / single channel?
im looking at a lga 2011 x79 board. namely this one> Newegg.com - ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard but am looking at this ram> Newegg.com - G.SKILL Ripjaws Z Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL8Q-16GBZH do i absolutely need to place 8 sticks of ram in? or can i get away with staggering 4 sticks accross the board instead?
View 4 Replies View RelatedI am building a new computer and I want to go with a dual screen setup. I was wondering if I should go with a GTX 670 2GB GPU or two Sapphire Radeon 7870s. If not specifically these cards, let me know what you think. Is it better to have a single GPU with dual DVI output or two slightly cheaper GPUs using crossfire?
View 5 Replies View RelatedI may want to up the memory on my machine from 1 GB to 2 GB which is the mainboard's maximum. It is an MS-7211 from MSI. Here is the only thing the manual says about memory:
Main Memory
• Supports two memory banks using two 184-pin DDR DIMM.
• Supports up to 2GB PC3200 (DDR400) SDRAMs.
• Supports 2.5v DDR SDRAM.
I want to get dual channel ram. Can anyone tell me if they know it is guaranteed to work? Or do you need a special motherboard for dual channel?
I noticed that I was running in single channel config, so I decided to move my ram around to run in dual channel. On reboot it says its running in dual channel, but my system reboots continuosly after the loading screen. Works perfectly fine if I switch it back to single.
Do I need to edit something in BIOS to get this to work or am I better off just sticking to single channel?
on the website it says that is supports dual channel ram and upto 32gb of it, will it work with a motherboard with 4 ram slots
View 3 Replies View RelatedI was running Vista and Windows 7 as a dual OS on two HDDs. I have just removed the HDD with Vista on it and reverted to a purely W7 OS however, when I now bootup, I am still seeing the message on screen giving the choice of W7 or Vista.
View 3 Replies View RelatedCan I make a dual boot for XP SP3 x32 and Win7 x64 on a single pc. Both will have their own hdd(primary master probably XP and primary slave Win7 x64 or other way around)...possible?
I'll have that project with an Asus K8V SE Deluxe mobo which is 64bit capable. Haven't tried it on that yet.(Using Win7 x64 on a newer pc).
I saw an old Compaq desktop with only 1.5gb ram with Win7 x32 and it was quite zippy(yeah surprised me really! ). It even had Adobe CS3, Cyberlink video editors(Power Director/Producer, Autocad 2005 in it in addition to Avast IS ver6(no firewall/behavioral shield, Comodo firewall(D+ max settings --sandbox disabled), standard Office 2007, PDFXchange Viewer suite etc..
Owner friend just did an experiment with that old Compaq and when it was finished invited us for a couple of beers and showed what he had done.
So me thinking....I might be able to try making that project but with an x64 capable mobo. Although I have not used x64 on it(even after I ditched it) it was zippy in XP x32 ram maxed out with Norton IS 2009 --with Malwarebytes, Superantispyware Pro/ ACAD 2008 / SAS Jump Statistical software / MathCAD / forgot the rest.
how do i remove single os from dual.i have windows 7 and server 2008.nd now i want to remove 2008.
View 4 Replies View RelatedThis is a strange one and i'm hoping someone can help me solve this!
I have a work PC with XP on with 2 x Nvidia 7300 GS graphics cards in. The system doesn't have an onboard graphics card and i've only got 2 so i can have dual monitors.
I tried to install Windows 7 Pro (32) on a seperate partition and it kept BSOD (hardware error 000124) on the 2nd reboot before finialising installation. The only way i've found of not making it BSOD (or just go to a black screen then restart) is to pull out one of the graphics cards and run it solo. With this done everything seems to work.
It will also happily boot into Safe Mode with both. I've got the latest NVidia driver from the site and it's been installed but that makes no difference to the issue.
Any ideas or should i just get 2 new gfx cards?
only one CPU be installed on a dual-CPU motherboard without compromising performance?
View 6 Replies View RelatedI have been trying for a while to install mac os x on my windows 7 pc i have followed hundreds of different tutorials and hit a wall at every one.
what is the best way to install mac os x on a single hdd? i no my pc is compatible with it i dont no where im going wrong.
I'm trying to install a new hard drive and retire my current one to backup and data storage purposes.
The problem is that I've installed Windows 7 on a hard drive with 2 partitions, an old XP partition (D:) and the new W7 partition (C:). At the moment the disk management screen looks like this:
What I am trying to do is delete the D: partition, and then copy/resize the C: partition including Windows 7 installation to my new hard drive (F:)
If I ignore the new hard drive and just try to migrate to a single partition, I can never get it to boot. I tried using Partition Wizard to set the C: as a primary, active partition, copied over the bootmgr and boot directory, then used bootrec /fixmbr and bootrec /fixboot to try to make Windows 7 bootable from just the C:, but it didn't work. All I got was "disk read error" whilst the PC was trying to boot off the C: (this is with all other drives disconnected...).
I could try to migrate to a single bootable partition from a 'dual boot' configuration?? I tried this video's advice and did everything as instructed but got the disk read error problem.
I cannot aford to buy SSDs yet and wanted to know how if at all I would clone my HDD to my Raid 0 Dynamic HDDs, windows wont install to them, and casper just overwrites one drive killing the dynamic setup and making a second single HDD clone.
I am using the trial edition of the current version of casper and trying to figure out if buying the full version would make a difference, the original drive is a 1.5TB and the two Dynamic Drive Array are 1TB, all seagates.I have 24GB of ram, a 2GB 550 Ti and a LGA1155 2.8GHz CPU running Windows 7 Ultimate Premium 64bit with a passive 3D LG monitor trying to run five game Accts simultaneously with TS3, Skype, GB3, Spybot and Logitech Services in the back ground
Tried tackling this one single-handedly to begin with and failed.
I have Windows 7 and Windows Server 2008 R2 installed as a dual boot, different partitions single HDD.
I want to remove the Windows 7 partition and keep the Win 2008. I do NOT want to lose anything from the Win 2008 partition. Taken from Disk Management.
Disk 3 with 5 partitions
1st - Healthy, Primary partition 73MB. (I thought this was system reserve but its not, leftover space from a previous partition change). It's currently mounted and completely empty.
2nd - Unallocated space 500mb
3rd - Windows 7 OS (Healthy - system, active, primary partition)
4th - Windows 2008 Server OS (Healthy - boot, page file, crash dump, primary partition)
5th - Unallocated space 8mb'ish
I haven't been using Windows 7 for years and want to clean this drives partitions up because it's messy and wasting space. I just need windows server 2008 as it's been used as a server for years and that's all I need it for now.
I want to safely remove the windows 7 installation and merge that partition along with the 1st and unallocated spaces back into a single partition where windows 2008 server resides.
Now I've tried tackling this myself and failed. I stupidly made the windows server 2008 partition as active which killed my boot and took me forever to repair with zero loss fortunately. Sadly it was as simple as using diskpart in a command prompt from win 2008 boot disk to make win 7 partition active again.
So, how do I do this? The boot manager must be on the win 7 partition as removing active killed it. The windows 7 boot (during startup) is long removed, system boots directly to windows 2008.
What is the difference between dual link DVI and single link DVI cables? Would I see a noticeable difference if I switch to dual link cables? Would I benefit any at all from switching from single link to dual link?
View 6 Replies View RelatedI setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
How to add "favourite channel list" for channel surfing it "windows media center" (Windows 7)
View 3 Replies View RelatedI've a Dual Boot with Xp/Win 7 on my office Desktop workstation. Window7 is the beta version of the Win 7. And like all other companies.... my company also want it's wallpaper and screen-saver on each machine ..... But i somehow manage to install Window 7 on my office Desktop.
Now i want to remove Window 7 partition and restore my Xp MBR and that too without using Windows Xp Bootable CD ( as CDs are not allowed in my company )...
How can i restore my Xp MBR while accessing my Xp Partition as i already have deleted my Windows 7 partition .
I would like to install 7022 onto my hard drive. Problem is i am unsure how to proceed because on another internal hard drive i have ubuntu installed. Now both OS are installed to different hard drives yet ubuntu has its boot manager installed and this gives me the option of booting either 7 or linux.
Im just looking for some guidance as i do not want to screw over the boot manager performing an upgrade.
I have also taken a full TI image of the computer just incase.
I'm running XP pro and would like to know if I can use a Win 7 pro upgrade DVD to make a dual boot system.
I would not be keeping it that way for long but I'm not happy going completely over to Win 7 in one go
I have a netbook running on N280 Atom with 2 GB of Ram and 2 partitioned drives at 72 GB each.
I have XP home edition installed on the C: drive and want to install Win 7 on the D: drive in order to dual boot.
The problem is that I have a Win 7 professional "upgrade" disk.
My question is: If I already have XP installed on the C: drive, will I have a problem (or is there any cons) with attempting to install Win 7 to the blank D: drive being that it's just an "upgrade" disk as opposed to a full OS disk?
Should I even try to do this?
The reason I'm even thinking of attempting this is because I get a super discount on the upgrade being that I am an adult atending a university. You cannot beat the student discount of $29.99 for Win 7 professional.
I don't want to shell out $200 for the full disk unless I absolutely have to...
I screwed up and ordered Windows 7 Pro before I realized I couldn't do an upgrade from Vista Home Premium. I really don't want to resintall all my programs. So I'm thinking about installing a new drive, and doing a dual boot setup with Windows 7 on the new "D" drive. Question is, can I do this with an upgrade version of Windows 7, or do I need the full version?
View 8 Replies View RelatedWell i am currently running Vista Home Premium sp2 and Windows 7 Ultimate (build 7100) in a dual boot config for about 2-3months and loving it. I was wondering if i could upgrade my Windows 7 install to RTM without affecting my Vista install? Do you get a choice which OS you want to upgrade or does it go by what OS you load the upgrade disc from?
View 5 Replies View RelatedMy boot drive is a 120Gb Samsung spinpoint, previously one whole partition containing XP. This XP wasnt a clean install, it was an upgrade to Windows 98 I think, and this may be the problem. I have a number of other hard disks, 1 PATA and 2 SATA, which I am using for video editing stuff.
I downloaded GParted, shrunk the XP partition to 76Gb and created a new 35Gb partition for Windows 7. A bit small, but I figured once everything was tested out, I could grow out the Windows 7 partition.
This was successful, and I inserted the Windows 7 disk...selected custom install, and installed to my newly created partition.
Windows 7 did its reboots and I filled in the usual bunff to create basic accounts, etc.
Then I rebooted, and was a bit surprised I did not get the dual-boot menu, it went straight into Windows 7. Using F5 and F8 did not provide any further options, specifically the 'Previous version of Windows' one.
Going into Windows 7 Disk manager, i could see the partition was still there. I read other posts of what Windows 7 does (belately) and yes, it had 'hidden' the XP partition. I gave it a drive letter (D, but Windows 7 saw it as an empty disk!
I downloaded EasyBCD, and it showed only one entry in the bootloader. I tried to add a new entry, using type:"Windows NT/2k/XP/2k3", but the Drive was greyed out; if I selected "Vista/Longhorn" I could then change the drive to D: and then change type back to XP (odd). I then clicked 'Add Entry', but it came back with an error message "EasyBCD could not locate a copy of NTLDR on your hard drive. Please download a copy of NTLDR and NTDETECT.COM from Htpp://(blah blah) and copy them to the drive D: in order for your newly-created entry to work.".
Does this mean my XP partition is truly trashed? Is there a way to get back my XP partition?
I am thinking of maybe inserting the XP disk and repairing, maybe it will detect XP and fix it, but if it will blow away both my installations, I might not bother.
Last resort is to use File Scavenger on the dead partition, but when I checked it out in GParted again just now, it said that 3Gb out of the 76Gb had data, could it be that Windows 7 has just not recognised my original XP partition as an XP partition, thought it was its configuration partition, and just overwrote stuff?
I have a dual boot scenario currently on an Intel 80GB SSD, with one partition as XP Pro, and the other is Windows 7, split 20GB(XP)/50GB(7).
The XP partition needs to be upgraded to Windows 7 for my wife's work remote access, and it will also include Office 2010 Pro.
Will I run into any issues dual booting into the existing Windows 7 partition after the upgrade, or should I just reinstall our personal Windows 7 OS after the upgrade is installed?
I have other hard drives to use as well if space becomes an issue, but I'd like to keep the existing Windows 7 install without starting from scratch.
I currently have Vista Ultimate x64 and Windows 7 RC1 x64 running in a dual boot setup. Each OS is installed on a separate disk drive. If I preorder Windows 7 Professional upgrade ($99) will I be able to do a clean install on a partition of my choice or will it force me to clean install over my existing Vista Ultimate partition ?? I understand that I cant do an upgrade in place from Vista Ultimate to Windows 7 Professional. My question is will the preorder Windows 7 upgrade force to me "kill" my Vista Ultimate partition ?
View 1 Replies View RelatedI just received my copy of windows 7 upgrade. I took the advisory test and passed it. I am just wondering if you would recommend me doing any pre upgrade changes before doing the upgrade I am currently running
AMD Athlon 64 X2 Dual Core 3800+
2.00ghz
3.00 Gb Ram
6200 Nvidia Gefource
Windows XP Home Edition
Version 2002 service pack 3
Other than that nothing much to state everything else will be migrated over.
trying to find a working driver for it on windows 7. My little 3 year old loving beast snapped my cd in half and i don't know where i got the product from. on the adapter it says 4-ch usb dvr.
View 7 Replies View RelatedI know I should pick channels 1,6,or 11 but not having any device other then my ps3 I cant run a channel scanner. I have no idea what my neighbors wifi's channels are should I just leave my routers channel on auto as it is always changing wifi channels my guess it's got a built in scanner I don't know if thats true it's a cheep belkin N150 or should I just go for a shot in the dark and pick one of the 3 channels?
View 3 Replies View Related